We're is the cheapest place to get these to start my own rental company I use to work for bounce house company for years did repairs event delivered ik blowers go for qbout 250 a pop idk if they went up or not
The amount of times I see jump cuts making people believe things on the internet is insane, my favorite is the food UA-camrs who take a bite of something and there’s a jump cut every time before they swallow, people really thinking they didn’t just spit that out.
Thread a new needle with a matching thread color. Tie a knot at the end of the new thread and insert the needle through the same hole where the old thread was. Pull the needle through until the knot catches on the fabric. Begin sewing the broken section, following the previous stitch pattern. Once you reach the end of the broken section, tie a knot in the thread and snip off any excess. @@yesseniamoreno6170
For people that don't know, bounce houses and large inflatable structures are supposed to leak air through the seams otherwise it would explode with the pump constabtly running and when people jump on it.
Nope, not at all, we used rent bounce houses, moonjump too actually the just kinda leak loke that, hence why you need a steady flow of air going in, thats part of how they work, ive covered one of these head to toe woth dawn to pressure wash it, it literally made the entire center fill up with air bubbles
This is edited. Notice how after he cleans the spot it has no hole, and then magically it has a large rip? And other things in the scene suddenly move? Called a jump cut.
When your looking for air leaks in anything, always use soapy water. The bubbles will show where leaks are. And them threads was old n dry rotted to start with. So any pressure would have done something. Stay safe and stay blessed.
Bought this product and it’s not as good as he says. Doesn’t remove hard marks on inflatables and it came in the mail damaged only got half my gallon. It’s basically just like any other disinfectant. 🤣🤦🏻♂️
I’m not here to scam people this video is obviously a joke it doesn’t burn through a jumper, but If you didn’t like the product I’ll happily refund you the money on the product im not here to scam anyone send me the order number
Actually most jumping castles don’t have a proper airtight seam which is why you’ll notice they have pumps running the entire time the castles are operational
They all leak like that. But due to the motors pushing such large volumes of air it doesn't matter. The jump cut to it being messed up was a nice touch though
It obviously had loose strings because the minute he sprayed it it bubbled up. That's how y I u find where the hole is in a ruptured tire. Bubbles where the air is escaping.
Just letting people who don't know my family has owned bounce houses since I was a little kid and they have holes on the strings so then the bounce house doesn't and think too much and pop that's why if you put water over the seams it will bubble
Don’t blame the product when you are aggressively wiping the stitching portion of the bounce house with chemicals that most likely assisted the pull of strings to loosen
Wait is this supposed to be good. I couldn’t tell what this means is it info on where to get stronger bouncy houses or info for incredibly strong cleaning solution that will bore a hole in string. Either way I’m good I already have a clean stringless bouncy house
Bounce house cleaner: thejumperguysupplies.com
Never getting service from here again. This guy caused a rip in my queens in hair party inflatables.
We're is the cheapest place to get these to start my own rental company I use to work for bounce house company for years did repairs event delivered ik blowers go for qbout 250 a pop idk if they went up or not
You cut the video ofc it’s not reall…
Those things are expensive to get restitched
Cleans so strong it brings dead grass back to life
Good eye 😂
Thanks for the laugh😂👍🏼
Boom!!!!
😂😂😂😂😂scammers😂😂😂😂
😂😂I will be getting this for my lawn promptly
Man, that jumpcut was so slick. Almost didn't even notice everything changing instantly.
Lol😂😂😂😂😂😂😂😂😂😂
The amount of times I see jump cuts making people believe things on the internet is insane, my favorite is the food UA-camrs who take a bite of something and there’s a jump cut every time before they swallow, people really thinking they didn’t just spit that out.
Even without the jump cut it was bubbling right away so probably air leak and lubricating the string to open up more would also make sense I think
Its normal for bouncy house stitching to leak air, thats why there is constant air going through one.
Look at the grass
They’re made to leak to add to the bounciness. If it’s totally sealed and leaks no air it gets too hard to really bounce on.
@@jacobboyd1888?? Did you miss the first 5 words of their sentence
@@macb8675yeah but what he's saying is that it's a different part of the bounce house that they show after the cut.
The sewing rope has broken. our product usually uses double stitching to avoid this situation
I have this issue now , how do I go about fixing it ? I’m a first timer 😅
Thread a new needle with a matching thread color.
Tie a knot at the end of the new thread and insert the needle through the same hole where the old thread was.
Pull the needle through until the knot catches on the fabric.
Begin sewing the broken section, following the previous stitch pattern.
Once you reach the end of the broken section, tie a knot in the thread and snip off any excess.
@@yesseniamoreno6170
I respect the hell out of this opportunity to advertise
Water down the solution
Dont use 100% of its power if not needed
@@jordyhelwig7657 Right!
For people that don't know, bounce houses and large inflatable structures are supposed to leak air through the seams otherwise it would explode with the pump constabtly running and when people jump on it.
Well no he was using the product PROBALY water to check the size of the leak his rough rubbing enlarged the hole that he was looking at 😂😂
@@kimrunyon7200 the grass changes boo
@@kimrunyon7200Well no, it was an unbelievably (literally) obvious jump cut. As in, they edited the video.
It's a different spot on the bouncy house. You can tell by the grass.
Good eye❤😊
And the bubbles at the bottom magically disappearing
Yeah true. Not even close to the same spot lol
Finnally someone else who realized 😂
Wow you're so smart. Did you also see the video cut at the end right before the hole magically appeared?
There's a straight up jump cut wym ,😅😅
Yea to another side of the thing where it was already ripped at lol they aint slick 😂😂😂
It miraculously made all the dead grass instantly turn green as well... good stuff! 😂
I mean... the fluid is GoGreen though right? It's magical... I think?
The bubbles were the giveaway that it was already thoroughly compromised.
Nope, not at all, we used rent bounce houses, moonjump too actually the just kinda leak loke that, hence why you need a steady flow of air going in, thats part of how they work, ive covered one of these head to toe woth dawn to pressure wash it, it literally made the entire center fill up with air bubbles
Pay attention to the mark on pink above stitching its not there when sprayed it jumps a clip then the marks there
That jumpcut wasn't slick
He's obviously pinching something between his fingers.
He just cuts the video...
This is edited. Notice how after he cleans the spot it has no hole, and then magically it has a large rip? And other things in the scene suddenly move? Called a jump cut.
Yes everyone noticed that mate
@@cashmoneydoe not before my comment, bruv
maybe dont use a knife to clean it
When your looking for air leaks in anything, always use soapy water. The bubbles will show where leaks are. And them threads was old n dry rotted to start with. So any pressure would have done something. Stay safe and stay blessed.
Looks super concentrated
Doesnt air slowly escape from the stitching eitherway,
I mean that edit tho. Top tier. 😂😂
This is how you look for puncture. I do the same with my bike innertube it's just dish washing detergent 😂
Bought this product and it’s not as good as he says. Doesn’t remove hard marks on inflatables and it came in the mail damaged only got half my gallon. It’s basically just like any other disinfectant. 🤣🤦🏻♂️
I’m not here to scam people this video is obviously a joke it doesn’t burn through a jumper, but If you didn’t like the product I’ll happily refund you the money on the product im not here to scam anyone send me the order number
Still no refund after days later and my email was responded to. Had photos attached of the damages and still no refund. 0/10
Get your money still bro
ots mrlohs awesome rebranded ngl
@@Thejumperguy8you suck
its supposed to leak a little bit everywhere thats why theres constant airflow into it
Just so yall know, it's supposed to leak like that.
Otherwise it explodes.
Fun fact bouncy houses constantly leak air through the sewed seems to regulate air pressure to keep from blowing up while your kids jump on it
No, you put soapy water on to check for leaks, because it will create bubbles, letting you know theres a leak. Do the same thing for tires.👍
That was a good edit had to watch it twice to catch it
If you’ve never mixed dish soap and water in a spray bottle to check for air leaks you’ve been sheltered
Perfectly timed cut...
Mom is going to hit me with that only once, cause after that I'm dead
I saw that jump cut buddy
Nice edit, clearly the grass isn’t the same in before and after sections 😂
No. Rubbing the stitching that was already coming loose caused the tear
Actually most jumping castles don’t have a proper airtight seam which is why you’ll notice they have pumps running the entire time the castles are operational
As a person who used to set up inflatables, it’s air escaping through the seams so the inflatable can breathe and not explode
They all leak like that. But due to the motors pushing such large volumes of air it doesn't matter. The jump cut to it being messed up was a nice touch though
Cleaner so strong it teleports closer to the problem
U can see the air bubbles in the solution it was already ripped
No air naturally comes out of the stitches on a bouncy house, its just a bad jumo cut to a different part of the bouncy house lol
rubbing the loose stitching and stickin' your damn fingers in it is what "dissolved" them
It obviously had loose strings because the minute he sprayed it it bubbled up. That's how y I u find where the hole is in a ruptured tire. Bubbles where the air is escaping.
Just letting people who don't know my family has owned bounce houses since I was a little kid and they have holes on the strings so then the bounce house doesn't and think too much and pop that's why if you put water over the seams it will bubble
That cut made my eyes hurt 😂
So strong it makes the video cut and move to a different bit of the bouncy castle haha
That'll learn ya!😂
So strong you had to cut off the clip of when it dissolved through because it would be too amazing for us to see
The leak was already there. You made it worse with the rag. The cleaner probably contributed too, but it didn't dissolve the threads.
This is how my dad taught me to find air leaks in a tire or tube. Spray a little soapy water and wait for the bubbles
That's wild! Wow.
It is sucks but it’s must be a strong cleaner that is for sure!
Dude bounce houses and other items like that come with small holes in it all over to let extra air out so it doesn't over inflate
Don’t blame the product when you are aggressively wiping the stitching portion of the bounce house with chemicals that most likely assisted the pull of strings to loosen
Bounces houses need a constant air supply, because they leak air constantly!
A raft patching kit and a good needle and thread(thick thread) would prob fix her up
Believe it or not plastic is a petroleum based product! It is a chemical reaction in its own right! You just added something that naturally reacts!
i feel embarrassed for not realizing there was a cut until checking the comments.. i was focused 😭
Moon Jump?!! Okay look bounce house was already a reach it’s a damn ‘Jumper’ be fvccn fr lolll
Did you really need soap for this … dude at that point just find another job 😂
pretty sure he’s checking for leaks and rents out the jumper for kids parties
They probably already had a hole, and they glued it shut. The spray reopened it.
You can see air was coming out right as he sprayed it with all the bubbling
The bubble was the indication it was already broken
They love saying you’re talking over them when they ask a question and you answer it
They leak at the seams. Otherwise they would inflate to the point that they burst
Hole was already there, that is why the product bubbled so much before you wiped.
That looks like muriatic acid. It dissolves things quickly. Particularly synthetic material.
I don’t think that it did but certain heavy duty degreasers definitely can be careful!
So strong it not only kills weeds it kills the dirt
He found the tear with soapy water.
You kids need to get out more.
No, the threads were rotten. They do that they rot and then they split the seems
Nah that’s a trick for finding a hole in an inflated item, spray soapy water on it! Then you can go in with your patch strategically 😂
Bro is jezus. He resurected the grass
Nice jump cut, not suspicious at all
No, your acid cleaner is fine, it was that knife you used right before the video ends 😂😂😂
So strong that the camera had to stop
Bro really took 2 steps to the right
It started bubbling immediately meaning are was already coming out of that area, anyways what would you clean with something so strong
I don't think you needed to spray anything on that to see if there was a hole there. I think it's pretty obvious.
No that's you opening so that you can fix sufficiently
It was broken same with a tire any liquid will actually bubble. You just broke it open the rest of the way
Where’d he get the teleporting spray bottle?! I want one!
Its so bad the grass gets greener and the strings make you wanna cut it so you blame the chemical
Different spot.. the grass changed colors
Is that the selling point or the negative of the product
No, he tore it further with his finger through the towel!
Should just be a grass restoration vid lol
it was already leaking you can see the bubbels form 😂
It's soap? 😂😂 It bubbles bc the air from the rip. It's actually how u find a leak
Wait is this supposed to be good. I couldn’t tell what this means is it info on where to get stronger bouncy houses or info for incredibly strong cleaning solution that will bore a hole in string. Either way I’m good I already have a clean stringless bouncy house
Nothing to do with the product.The product did not dissolve the Stitch. It just broke
Buddy sprayed paint stripper on the bouncy house 💀
Maybe not diluted enough is a better explanation
How your grass get green in seconds i need that to become rich
Are you sure they didn't just get slippery and pull out?
Don’t look like chemical dissolving in any way
Did eney one else see the cut?
dude just scratched a hole in it
He cut that shit by his self
The dude is literally spraying a soap mixture on there to see if there's a leak. Some of you are stupid. I love the troll comments tho 😂
No, the video edit wasn’t noticeable AT ALL! 😂
Why tf would you destroy a bounce house??
So strong it cuts the video.
Did you sow it back or patched it and Ive never seen that before