Excellent video - I will now take a closer look at the LA 500 because our gates are similar in size and weight vs the LA 400 is was looking at. The quality of your workmanship is fantastic. You have helped me with my new gate opener purchase.
Nicely done man. Found your video while searching for ideas for a secured automatic entry gate project a client wants done on his property that will potentially become an Airbnb
Thanks for the informative video and good explanation. Im looking to do a similar setup and can not find any reasonably priced professional installers in Arizona.
Can you go a little further into the magnetic lock? What brand? Where did you purchase? How did you get it to sync up with the opener remote? Etc. I really like that feature and with reading reviews on this particular model, it’s necessary because of how the wind can damage the opener
Hola pablo. Me gusto mucho el trabajo de su gate estoy haciendo algo bien parecido. Me puede dejar saber que tipo de cable uso para extender el cable del lock hasta el control? Gracias de ante mano
Great craft work , Do you have the video how you hook up mag lock to LA 500? Do you using the 24 V DC transformer or are you hook up with the LA 500 controller board ? Again " Great Great video"
Very cool - I am looking to designing, buidling and installing a similar gate for my home. Is there any way to get design plans and parts list for build?
I currently have a Linear SW3000XLS series (dual gates). How does this liftmaster compare? Mine will need replacing soon, and I'm not sure if I want to swap out for the identical system, or go with a new brand. My Linear is about 7 years old, and I'm having issues with the secondary arm, and it doesn't make sense to just replace one arm at this point. Thanks in advance!
I had my gate only for a few years, but I have installed LiftMaster in other places and I have had good luck. LiftMaster also has my q which allows you to open and close the gate from your phone which allows you to open and close the gate from yourself
It's a good thing you put that mag-lock on there. That solid surface privacy gate has a huge wind load. It's just a big sail. In fact, if you contact Liftmaster Tech support, they will tell you never to use the LA500 on a solid surface gate like that. Even with the mag-lock, as the gate is opening or closing, the wind could catch it and destroy that actuator. None of the actuators of this type should ever be used on a privacy gate like this. There is one, but most not only make the suggestion, but will insist that you do not use that type of actuator.
@@UA-camMaster1611 Every manufacturer specifies the design load limits of each of their models, typically with a width/weight dimension. What I would suggest is dependent on a couple of factors. I would not only need at least an estimate of the gate's weight, but also of its length. I would also need to know whether the gates will be privacy gates, or with a picket and frame construction. If you would provide me with that information, I will make at least a couple of suggestions.
So I have the let mag lock for my 13 ft gate but it only came with about 6 ft of wire did you add additional wire to get it from your power source all the way to the other side of your gate and how did you do so?
@@pablodoesitall7256 Hello Sir! I am also interested in the bracket. What would you say the distance is from where the hinge of the gate would be to the hole for the actuator. My distance of bracket may be slightly longer, but the same distance would be used for the clearance from where the seam is from where the gate opens and closes to the hole of the bracket. Hoping you can help me out! Also, how far away is the hole (bracket) from the actual gate? Any info would be greatly appreciated! Lastly, what is the thickness of the bracket?
Looks awesome! How many dudes did it take to help you mount that 500-600lb beast?! I’m a fan of the myQ app, it will tell you how long it’s been opened for. Looking forward to more vids :)
@@pablodoesitall7256 Awesome thank you so much! last question what’s the brand you bought for the antique bronze patina and with what did you apply it with?
@@pablodoesitall7256 the constant amp draw makes the mag-lock … a non solar ….. but maybe a mag type dead bolt….will give peace of mind….anything to keep out the rift raft….and it’s not getting better with Brandon’s border.
That turned out very nicely. So many peoplle have substandard gates. Outstanding job.
Sorry everyone about the wind noise upgrading the mic soon I will be the cameraman an editor for this channel
Hello everyone thanks for the support
Excellent video - I will now take a closer look at the LA 500 because our gates are similar in size and weight vs the LA 400 is was looking at. The quality of your workmanship is fantastic. You have helped me with my new gate opener purchase.
I am glad you liked it
Nicely done man. Found your video while searching for ideas for a secured automatic entry gate project a client wants done on his property that will potentially become an Airbnb
Thank you hope it's helpful
Thanks for the informative video and good explanation. Im looking to do a similar setup and can not find any reasonably priced professional installers in Arizona.
That Gate looks awesome! Nice job
Pablo, please make a video of how your control box is wired. Show how you wired the mag lock. I need help with this. Thank you.
Can you go a little further into the magnetic lock? What brand? Where did you purchase? How did you get it to sync up with the opener remote? Etc.
I really like that feature and with reading reviews on this particular model, it’s necessary because of how the wind can damage the opener
The magnetic lock is made by liftMaster It is a 1300 lbs It is very necessary if you have a windy area that you live in
@@pablodoesitall7256 how do disengage the lock . Is it separate from the gate opener
@@protectork9831 No it is not separate it works with the computer
Please respond to this question because I want to kno the same thang
Clean fence brotha!
Really nice job. Great attention to detail.
Yo yo i am here from Reddit
That's smart to put the magnet
Hola pablo. Me gusto mucho el trabajo de su gate estoy haciendo algo bien parecido. Me puede dejar saber que tipo de cable uso para extender el cable del lock hasta el control? Gracias de ante mano
I’m not exactly sure I don’t read Spanish
How does this particular liftmaster work in windy/non windy conditions like a mix of both? Any comebacks for problems? Thanks a bunch
Great craft work , Do you have the video how you hook up mag lock to LA 500? Do you using the 24 V DC transformer or are you hook up with the LA 500 controller board ? Again " Great Great video"
Great fence work and video. How can I get a hold of you for a fence install quote?
What state and city are you in?
@@pablodoesitall7256 Ontario, California
@@jher011 lol my shop is also
909 618-6199
Very nice video. I'm working on a similar project right now.
What kind of hinges did you use?
Very cool - I am looking to designing, buidling and installing a similar gate for my home. Is there any way to get design plans and parts list for build?
How big of a gate are you looking to do
@@pablodoesitall7256 16 ft x 6
@@WiltbergerStreet Do you want to send me your information so I could do a drawing
Very good project my man.
Nice work. Is the entire weight of the gate held by a 3x3 tube embedded in the ground? Or is the 3x3 anchored into the wall?
Looks great. How’s it holding up given all the warnings about wind etc???
I’m installing a single outswing across my 11’ drive. This looks perfect!
Nice build!
Thank you
I currently have a Linear SW3000XLS series (dual gates). How does this liftmaster compare? Mine will need replacing soon, and I'm not sure if I want to swap out for the identical system, or go with a new brand. My Linear is about 7 years old, and I'm having issues with the secondary arm, and it doesn't make sense to just replace one arm at this point.
Thanks in advance!
I had my gate only for a few years, but I have installed LiftMaster in other places and I have had good luck. LiftMaster also has my q which allows you to open and close the gate from your phone which allows you to open and close the gate from yourself
It's a good thing you put that mag-lock on there. That solid surface privacy gate has a huge wind load. It's just a big sail. In fact, if you contact Liftmaster Tech support, they will tell you never to use the LA500 on a solid surface gate like that. Even with the mag-lock, as the gate is opening or closing, the wind could catch it and destroy that actuator. None of the actuators of this type should ever be used on a privacy gate like this. There is one, but most not only make the suggestion, but will insist that you do not use that type of actuator.
What do you suggest?
@@UA-camMaster1611 Every manufacturer specifies the design load limits of each of their models, typically with a width/weight dimension. What I would suggest is dependent on a couple of factors. I would not only need at least an estimate of the gate's weight, but also of its length. I would also need to know whether the gates will be privacy gates, or with a picket and frame construction. If you would provide me with that information, I will make at least a couple of suggestions.
Does the electromagnet wire into the circuit board? Is there a dedicated place to hook it up?
Yes, it does
You did really good work.
Nice, how much weight can hold Brother
Craftsmanship 10/10
So I have the let mag lock for my 13 ft gate but it only came with about 6 ft of wire did you add additional wire to get it from your power source all the way to the other side of your gate and how did you do so?
Yes I added wire I made a channel inside of the frame
Where did you find the brackets to make it an outward swing? Did you manufacture that or do you have a part number?
I fabricated it.
If you want I can email you some info
@@pablodoesitall7256 yessir please do!
@@whp44444 What’s your email
@@pablodoesitall7256 Hello Sir! I am also interested in the bracket. What would you say the distance is from where the hinge of the gate would be to the hole for the actuator. My distance of bracket may be slightly longer, but the same distance would be used for the clearance from where the seam is from where the gate opens and closes to the hole of the bracket. Hoping you can help me out! Also, how far away is the hole (bracket) from the actual gate? Any info would be greatly appreciated! Lastly, what is the thickness of the bracket?
Is the outward swing a standard option for the liftmaster , or was that a custom set up?
You can set it up both ways. I made a custom bracket
Looks awesome! How many dudes did it take to help you mount that 500-600lb beast?! I’m a fan of the myQ app, it will tell you how long it’s been opened for. Looking forward to more vids :)
Hey man thanks for subscribing It took about 3 guys To set the frame only. And then I installed all the wood And hardware. I got more videos coming
Are there swing in for these model? Thanks
Perfect work except that the stainless steel bolts corrode iron badly.
Good to know But I actually think they’re nickel plated
Love your gate build. What is the difference between an In swing set up and Out swing set up? Are the brackets different?
Yes
Beautiful!
Do you have issues opening against stron winds?
How do you like the gate opener so far? I have a push to open from ghost control and keeps giving me problems.
I love my My opener.
I see its been a year. How's it holding up? Any adjustments needed?
Great no problems
Is it not advisable for the gate to open towards a wall or structure? Crush someone?
It has sensors to stop
Would the la400 be set up tp swing out as well
Great Build!
Pablo - Do you have plans for the gate? I want to build similar (exact) one for my home.
What thickness steel did you use for the 2x4 pieces.
1/8
What black paint did you use on this gate and what bronze? Beautiful work by the way!
Black is powder coat Black with antique bronze patina
@@pablodoesitall7256 Awesome thank you so much! last question what’s the brand you bought for the antique bronze patina and with what did you apply it with?
@@adrianperez3994 It’s called metallic paint collection satin finish antique bronze
Very nice build
Why did you select and use the lift master?
And What’s the ram rated at?
I have use the LiftMaster motors on other projects and been happy with them. I Also like to myq app
@@pablodoesitall7256 the constant amp draw makes the mag-lock … a non solar ….. but maybe a mag type dead bolt….will give peace of mind….anything to keep out the rift raft….and it’s not getting better with Brandon’s border.
Can I use this swing machine to make foldable pool cover ??
Not sure how you would do that.
@@pablodoesitall7256 just like bifold doors but inverted
How has it held up so far? Any issues with the magnetic lock?
It has been great no problem with the lock or motor
@@pablodoesitall7256 the mag lock really impresses…but if you just have solar…what might work?
Can I see wiring inside box
Not sure how I can send you a picture
What is the cost?
Where do you get the out swing bracket
I fabricated it myself
file:///var/mobile/Library/SMS/Attachments/29/09/at_0_DBF04843-A5CC-4BE0-A771-77BBDDB45FFB/IMG_0470.jpg
You can not actually control the speed with Liftmaster. Nice work on the gate.
How wide is your gate? 12 ft?
10’
what model is the motor?
La500 lift master
how wide is the game ?
10’
That gate is a giant wind sail, LM will never warranty that operator, do to the way that gate was made. Nor will that motor last.
Can’t hear you Pablo
wind is drowning out your narative.
Chingon
Nice work ! I have some questions what’s the best way to contact you ? Email or text ?