Hello, I wonder if you could help me. I placed a uv dtf sticker on a plastic crossbody purse and its stuck very well BUT now i have a horrible amount of residue around the sticker. How can i remove it without removing the sticker? I have tried vinegar, alcohol, sanitizer, oil, and still nothing.
@@deeayeveeeyees well, still evaluating all conditions. Scuff & clear Sealed for sure. Better suited for smoother surfacing, light texture. On a Fresh paint application a day later, tricky without heat to help remove film, otherwise the top transfer film needs diy swapped so its not aggressively sticking to fresh paint.
So you need different printers for DTF(shirts) and UV DTF(glass wrap)? Is different printer and UV ink is all you need? Is the light that cures the ink in the printer already?
if you're having clogging issues it could be due to lack of humidity. if you have the printer in an area with lot of apparel, the apparel can absorb the moisture in the air and cause clogging in the heads. something to consider.
@@starstreetadventures unfortunately I don't know the ideal humidity range so can't give you an exact number. but you might check with your supplier and see if they are able to tell you
OKhay this is good...
Can you also share;
1. Cost of the printer
2. Maintenance Cost
3. Printing process, etc...
Does it pass the dishwasher test? Will the sticker stay on?
Hi, I have a Mimaki UCJV300 roll type printer. Would it work for that type of printer?
which printer did you use for the uvdtf?
Can the uv dtf sticker work on Stainless steel jewelry?
I believe so, anywhere it can get stick.
Hello, I wonder if you could help me. I placed a uv dtf sticker on a plastic crossbody purse and its stuck very well BUT now i have a horrible amount of residue around the sticker. How can i remove it without removing the sticker? I have tried vinegar, alcohol, sanitizer, oil, and still nothing.
That is how they are. It's not very noticeable residue because usually clear but you can feel it and it's there if you look at in light.
Heck it sticks to light texture concrete, with a heat gun to conform after release film is pulled. It works, not sure how it will hold up over time.
how has it been holding up after 3 months?
@@deeayeveeeyees well, still evaluating all conditions. Scuff & clear Sealed for sure. Better suited for smoother surfacing, light texture.
On a Fresh paint application a day later, tricky without heat to help remove film, otherwise the top transfer film needs diy swapped so its not aggressively sticking to fresh paint.
I have a dtf printer for apparels, im trying to decide between uv dtf or white toner what is the difference?
Don't waste your time with white toner unless you have the clientele. Supplies are expensive.
For sure UV DTF
do these stick on PPF?
Very nice. Is it microwave safe or wasable wih washing machine?
I will try to make a video about wash testing
Did a video about it ua-cam.com/video/E25EYgRvK-Q/v-deo.html
Can you microwave the mugs with this products?
No mainly for hard surfaces that don't require too much scrubbing or any heat
What’s a good UV dtf printer
For print into wood then you recommend DTF instead of UV DTF?
Sublimation is best for wood,glass,ceramic,metal
Is it dishwasher safe
So you need different printers for DTF(shirts) and UV DTF(glass wrap)? Is different printer and UV ink is all you need? Is the light that cures the ink in the printer already?
Yes, they are separate printing. UV dtf printers have the light to cure the inks and varnish.
have you done the wash test, As my experience it falls off with warm soapy water
Did a video about it ua-cam.com/video/E25EYgRvK-Q/v-deo.html
Can you use on fabric ?
No
Does UV DTF white ink also have the same problem of clogging in the head as DTF printing? Also, does it need to be shaken?
It will have maintenance as well.
if you're having clogging issues it could be due to lack of humidity. if you have the printer in an area with lot of apparel, the apparel can absorb the moisture in the air and cause clogging in the heads. something to consider.
@@deeayeveeeyees What is the ideal humidity range?
@@starstreetadventures unfortunately I don't know the ideal humidity range so can't give you an exact number. but you might check with your supplier and see if they are able to tell you
Hi are you selling these UV Dtf on your website yet?
The supplies yes
would this print on EVA foam?
Not sure. Will need to try to stick and see.
You wasted first two minutes by putting that rubbish music.