UV Printing: What You Should Know

Поділитися
Вставка
  • Опубліковано 9 лис 2024

КОМЕНТАРІ • 47

  • @Deafeningstorm
    @Deafeningstorm Місяць тому +11

    I've worked for a graphics printing company since 2008. Best advice I can give you is to run that machine every day. Even if it's a test print. Run something. Even the white. Those white print heads can clog. Not sure about the Mimaki white ink, but our white ink has titanium in it that can cause it to clog the print heads if you let it sit. Good luck!

    • @chadspradlin7667
      @chadspradlin7667 Місяць тому +2

      pull out the cartrage and shake it everyday. the ink will separate.

  • @lorifisher245
    @lorifisher245 Місяць тому +1

    Gosh!! I didn’t realize I had FOMO!! But I do bc I wanted a UV printer but thank you for showing me my small business isn’t ready for this! You put things into perspective that we can understand. I appreciate your insight!

  • @74CreativeDesigns
    @74CreativeDesigns Місяць тому +2

    Thank you so much for such great info and not sugar coating the cost and maintenance and what it takes to run one. Very cool, maybe one day! 😊

  • @elohimembroiderymore3147
    @elohimembroiderymore3147 Місяць тому +1

    We bought our 6042mkIIe from PDS as well. We do not run ours everyday so the only thing we have to do daily is shake our white ink...run the printer at least a few times a week....clean test prints. I can't wait to see what Emily does with hers...

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому

      @@elohimembroiderymore3147 thank you for sharing. I’m realllyyy excited about Q4. 🙈🙊😍

  • @a7xfanben
    @a7xfanben 2 дні тому

    Great video!

  • @Theenceecollection
    @Theenceecollection Місяць тому

    This was so helpful! I was so unaware of some of the things you mentioned. Thank you Em! I think I'll hold off for now till im truly truly ready.

  • @ianrepollet6016
    @ianrepollet6016 22 дні тому

    Great content thanks so much for sharing congrats on your success may it continue to grow in abundance

  • @jbilous1
    @jbilous1 13 днів тому

    Great video.
    How much does this printer cost?

  • @OrionsOasisDesigns
    @OrionsOasisDesigns Місяць тому

    I've gone through so many clear acrylic sheets checking the print-heads before each job. The UV printer is a maintenance nightmare but I felt like my background as a printer and copier technician would be a great benefit. I'm just a small craft shop that does laser and UV printing for craft/farmers markets.

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому +1

      Yea that's definitely why I wanted to help give as clear a picture as possible before people get FOMO for something that may not be the best fit for their needs. Once you get the maintenance down it's really easy and simple. I hope you're not running into those issues anymore.

    • @creative_one-z6f
      @creative_one-z6f Місяць тому +2

      Print the test on a glass sheet then razor blade it off. I use transparency film as well.

  • @susan_halla
    @susan_halla Місяць тому

    Just bought one about a week ago - looking forward to getting it up and running! Not a Mimaki (so jealous!) but one I could afford so that I could dip my toes in to see if it will complement my business.

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому

      @@susan_halla thank you for watching. They are so much fun! Don’t slack on taking care of your new toy and I look forward to hearing about what you do with it! 😃

  • @1swttl
    @1swttl Місяць тому +1

    Not all printers in the same class as the Mimaki UJF have to be cleaned "every other day. every 2 days max". I have a Roland VersaObject MO-240 and it only needs to be cleaned weekly. If you choose to go with the white ink option, then they recommend the white ink cartridges be "shaken" every 2 days. I've gone 2 weeks without touching it without an issue. I come from the wide format printing side of the business for almost 20 years...Overall, fantastic video!

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому

      This is great feedback. Thank you for sharing. I received the printer right during the middle of summer with lts of momming and travel. It's possible I didn't put enough maintenance fluid before I left or didn't shake the whites enough in between. I will try that next time I'm away for more than 2-3 days but overall I've found I love my printer more when I don't let her sit for too long, ha. Thank you for sharing!

  • @leviteapparel
    @leviteapparel Місяць тому +1

    Your channel is amazing. Just subscribe. Video looks great.🎉🎉🎉

  • @melnakabayashi2712
    @melnakabayashi2712 25 днів тому

    Is there a good affordable printer to start with? My business is very small but I want to get into uv printing for tumblers and other blanks

    • @seanyiya
      @seanyiya 18 днів тому +1

      If you don’t run the UV printer everyday, don’t get UV printer

  • @angiefilipsic4398
    @angiefilipsic4398 Місяць тому

    Thanks Emily!

  • @MichelleGarner-mg2sk
    @MichelleGarner-mg2sk Місяць тому

    I have the sublimation Epson 570 I really wanted UV but that’s next.

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому

      We all start somewhere. Five years ago this was waayyyyy out of reach.

  • @Iwannarox
    @Iwannarox Місяць тому +2

    I shall watch this and live in the fantasy world where I can actually afford a UV printer...

  • @WooderBoyProductions
    @WooderBoyProductions Місяць тому

    The Mimaki doesn't have a self cycling mode?

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому +1

      Great question. It absolutely does.

    • @pdsequipment
      @pdsequipment Місяць тому +3

      The Mimaki does have Self cleaning features and white Recirculation.

    • @WooderBoyProductions
      @WooderBoyProductions Місяць тому +1

      @@ThatMomWithALaser Are you an affiliate of PDS or did give your the machine for product review?

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому +1

      Thanks for your question! 😊 I’m not an affiliate of PDS Equipment, and they don’t have an affiliate program. I did receive the machine for review purposes, which I mentioned in the video and the description. I always aim to provide an honest and unbiased review based on my experience, so I hope you find the information helpful! If you have any other questions about the printer, feel free to ask.

  • @YolandaGoldey-w3n
    @YolandaGoldey-w3n Місяць тому

    Tremblay Shoals

  • @RickDavis-j4u
    @RickDavis-j4u Місяць тому

    Hahn Club

  • @Mr.Frisky-2x
    @Mr.Frisky-2x Місяць тому +1

    She looks very annoyed with the shaking of the ink.
    But I love her videos.
    I am not sure why they can have the software cycle the printer by itself.
    You think with 30 grand, maintenance would be less hassle! 🤔

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому +1

      Hey there. Thanks for sharing. I wasn't annoyed. It probably seems that way because I'm not used to having the camera on me without having anything to say but I wanted to model what everything looks and feels like. It's a great piece of equipment and Mimaki has white ink circulation all the way through the print heads and subtanks. Mimaki also has a jettable primer that allows for superior adhesion. :)

    • @Mr.Frisky-2x
      @Mr.Frisky-2x Місяць тому

      @@ThatMomWithALaser You are a creator and maker.
      I am sure you can figure out a way to add an agitators to the top of all the ink canisters or at least the white one.
      They sell the bottled lids that mix the health drinks.
      I'm sure one of those lids could be modified to fit on top of the ink canister and even set on a time.
      But maybe for the next video!
      By the way you are amazing!!! 😅

    • @ThatMomWithALaser
      @ThatMomWithALaser  Місяць тому +1

      @@Mr.Frisky-2x Bahaha I appreciate your faith in me but the thought of trying to do that already gives me anxiety, ha. Thank you for the kind words and for sticking around!

  • @DanielCarter-d2f
    @DanielCarter-d2f Місяць тому

    Greta Lights

  • @長谷川雄太-b6e
    @長谷川雄太-b6e 28 днів тому

    Elody Way

  • @PerryBennett-j3d
    @PerryBennett-j3d 18 днів тому

    Mimaki?? $60,000 USD supported with a mere 1 year warranty. Would you buy a car for $60K with a 1 year warranty!?!. NOPE. $4,000 to replace a print head (parts and labor). NOPE.

  • @Leb.Mountain
    @Leb.Mountain Місяць тому

    I think i read the title is about what we need to know before we get a printer , not an advertisement for PDS and ya just to let you know i bought my uv printer from china yes china and its working like a charm and better quality than this , and no I'm not Chinese I am Canadian...... And ya for who is reading my comment the Chinese printer same size shipped to Canada was quarter the cost of this 35k or 50 k

    • @Beachez132k_
      @Beachez132k_ Місяць тому

      What printer did you get if you don’t mind me asking?

    • @PavloPrannykPP
      @PavloPrannykPP День тому

      What printer did you buy?

  • @e2U
    @e2U Місяць тому +1

    Click Bait! More for selling equipment.