I love this design so much 😍thank you for teaching me! ❤️ I made one and completely missed the cross knot sealing the bottom so I tried again today and it came out FLAWLESS🤩I'm truly so thankful for this video❤️I'll be making 4 more for my fam and I for our hikes in Hawaii. 😁
Thank you! ❤ Beautiful work. I just finished mine! We are heading to Mexico for spring break/as a babymoon and I didn't want to carry a water bottle around all the time to stay hydrated, but also didn't want to wear a backpack and get hot! So cute!! I added 20% to each measurement to fit my 40oz bottle. I just barely had the length to complete, so i would suggest adding 25%.
Thank you so much. I made one for my son. All the instructions are very clear except towards the end where you make the triangle by opening up some knots. I couldn't do that. I am a beginner at macrame and this was my first project. But the design of the bottle is very friendly- it is drawstring, there is a base, and the length of the strap can be adjusted. Thank you so much.
Hi! Thank you so much for your appreciation. I'm so humbled to know you considered my tutorial to be your first project. I hope it helped you a lot. I opened 3 knots at a time (triangle) in forming the base. I hope you were able to slow it down and follow along. Cheers! ♡
I also am struggling with the base. Mine looks a mess! I can't understand how to finish it. All scratty ends! Shame I got this far and unable to finish it.
This looks so good! I've never done macramé before but would like to have a go... Am I correct in thinking that this project would use 30m of rope altogether? That just seems like a lot and I want to check that I've not missed something important before i buy the rope 😊
Consegui fazer apesar de ter feito menor as carreiras das laterais pra dar certo na minha garrafinha. Não é difícil, coloca numa velocidade menor que você entende a sequência.
So good! Im trying to make it for my bottle that is 31cm in length and 9cm in diameter with a 5cm and 4cm cord sizes. Any clue on how I can adjust the measurements?
I love the design but am a bit confused by the cord size as you state 4mm is used in the description then 3mm in the beginning of the video. Which should I be using for the main bottle holder as mine seems to be smaller than the measurements you say for the bottle size. Thanks!
I love the design, however I can’t seem to get the bottom quite right. I’ve attempted and taken it apart 3 times and now my cord is fraying at the end. I don’t think I’m doing the triangle thing correctly, but I just don’t know. 😣
It's so easy! So there should be a total of 12 knots all the way around the bottom line. Take 2 apart on the bottom row and one above them between. Then skip on knot on the bottom and unknot 2 more next to it, then one above those two as done previously. Keep doing that 2 more times and you should have your equal triangles. Hope that helps!
I struggled with it too lol. What helped me was putting a pin at every three knot triangle (leaving one knot between each triangle) to make sure my placement was right before going ahead and unknotting them.
Hello Mandy! Thank you for your question. Yes, no need glue. The knots at the bottom are strong enough to withstand the weight of the bottle and its content. :)
Hi, I love this pattern and your clear instructions and modelling. I am running a stall for a school charity event and we will be selling all of these materials. I wondered if you would be happy for us to direct people to your You Tube channel for how to make these to give them ideas? All proceeds are for a local wildlife charity.
Hi, i love watching your videos ❤️ Can i ask, how long do i need the ropes to be when making holder for a 1.2 liters tumbler? Diameter: 3.8" Height: 11.2"
Hello! Melanie, thank you for asking. Bottle size in the video has a height of 22cm and a base diameter of 7cm. This design best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm.
@@SilentKnot If you convert to inches 7cm in 2.75 inches that is way too small. Even a regular plastic store bought water bottle is larger than that. I don't think 7 cm is correct at all
Saw this post on Pinterest and here is the tutorial! Thank you so much I really appreciate you sharing your expertise and knowledge!
Thank you! Ive been looking for a bottle holder pattern with a nice finished bottom, and this is just what I wanted!
Thank you for sharing this pattern and technique! Can't wait to try. I think it will be great for mini baskets as well! 😊😊
You are so welcome! Thank you so much, hope you have lots of fun!
I love this design so much 😍thank you for teaching me! ❤️ I made one and completely missed the cross knot sealing the bottom so I tried again today and it came out FLAWLESS🤩I'm truly so thankful for this video❤️I'll be making 4 more for my fam and I for our hikes in Hawaii. 😁
Thank you! ❤ Beautiful work. I just finished mine! We are heading to Mexico for spring break/as a babymoon and I didn't want to carry a water bottle around all the time to stay hydrated, but also didn't want to wear a backpack and get hot! So cute!! I added 20% to each measurement to fit my 40oz bottle. I just barely had the length to complete, so i would suggest adding 25%.
Pls keep on watching silent knot...it's an amazing work of art🙏
this is so beautifully made. My mom has parkinson's . I'm gonna try to make one for my mom. Thank you for the inspiration
Thanks so much for the clear tutorial. I love it, would like to try this asap ❤
Beautiful, i can't wait to get the materials to get started!
Thank you so much! Hope you have fun! ♡♡♡
Mãos de Deus 👏🙏🙌
Maravilha,amei seu trabalho. Muita luz na sua vida ❤🤩😍😘
Thank you for sharing!!! I would love to start a small business one day. I’m stilll learning and I appreciate you making this!
this video is amazing! your design is very well thought of. I love it! can't wait to try it myself! thank you so much for sharing this. 🤗❤️
Замечательный мастер-класс ❤Благодарю Вас!Желаю успехов❤
Thank you so much. I made one for my son. All the instructions are very clear except towards the end where you make the triangle by opening up some knots. I couldn't do that. I am a beginner at macrame and this was my first project. But the design of the bottle is very friendly- it is drawstring, there is a base, and the length of the strap can be adjusted. Thank you so much.
Hi! Thank you so much for your appreciation. I'm so humbled to know you considered my tutorial to be your first project. I hope it helped you a lot. I opened 3 knots at a time (triangle) in forming the base. I hope you were able to slow it down and follow along. Cheers! ♡
I also am struggling with the base. Mine looks a mess! I can't understand how to finish it. All scratty ends! Shame I got this far and unable to finish it.
Super!!!!!🎉
Just finished mine, kinda lost finishing the bottom, but finally it closed 😂 great tutorial, thank youuu so much!!!
Tô boba com tanta sabedoria muito lindo ,obrigada por compartilhar
Maravilhoso, amei. Parabens
Ganda naman, at napakagaling pagkakagawa❤❤❤❤❤
Maraming salamat po! ❤️
Amazing! I really want that.
Благодарю за оригинальную идею ❤
Hermoso gracias
Thank youu so much for the tutorial!
This is awesome... thanks for such detailed video
You're so welcome! ♡♡♡ Thank you!
Parabéns pela criação dessa peça. Fiz uma pra mim e amei o resultado. Tive que fazer um pouco menor para minha garrafinha mas ficou linda. Obrigada
This looks so good! I've never done macramé before but would like to have a go... Am I correct in thinking that this project would use 30m of rope altogether? That just seems like a lot and I want to check that I've not missed something important before i buy the rope 😊
Wonderful and useful... ill try to do it soon
Beautiful work ❤️
My heart is grateful! 🤗♥️ Thank you!
So great 😀 amazing work 👌❤️
Thank you so much dear!❤️🥰💖
Just wonderful.
I'm so glad you think so, thank you! ♡
Thank you🤗 very beautiful
You are welcome! Thank you very much. ♡
bottom part is impossible
That’s what I thought 😭 this is too hard for me, I need a very low video explaining how to do it 😭😭
I agree. It's very hard to see. I just improvised and made up my own
il faut mettre la vidéo au ralenti peut être et un peu de concentration 😂
Consegui fazer apesar de ter feito menor as carreiras das laterais pra dar certo na minha garrafinha. Não é difícil, coloca numa velocidade menor que você entende a sequência.
So good!
Im trying to make it for my bottle that is 31cm in length and 9cm in diameter with a 5cm and 4cm cord sizes.
Any clue on how I can adjust the measurements?
Very nice.good job.
I have to learn from your tutorial.
💖🙏
Ya! Thank you so much! Hope you find my tutorial helpful. Cheers!
Wow very nice 👍👍👍
Thank you so much! ♡
Una maravilla!!!
Really appreciate it! 🤗♥️😍
Thank you!!!❤
It’s gorgeous? Can you wash it on a washing machine?
I love the design but am a bit confused by the cord size as you state 4mm is used in the description then 3mm in the beginning of the video. Which should I be using for the main bottle holder as mine seems to be smaller than the measurements you say for the bottle size. Thanks!
❤️🥰❤️🥰❤️🥰👍❤️🥰😍♥️😍♥️😍♥️😍♥️😍♥️😍
Very nice ❤️🥰i love 😍i love
Fantástic 😍❤️🥰fantástic
Un fuerte abrazo fraterno desde colombia 🇨🇴
Aww! Your message is the sweetest! Thank you so much! Sending you lots of hugggs too! 🤗♥️😍 Have a beautiful day!
Спасибо, замечательно!
Thank you! ♡ ♡ ♡
A question please; If I want to do this design for a bottle with 9cm diameter and 28cm height, what lengths to do I need to adjust?
Can you do this all with 3mm string? Or is 4mm absolutely necessary for the strap please?
I did it with all 3 mm and it turned out fine
How many centimeters tall and wide will a bottle fit in?
Love this - thanks for sharing!
Glad you enjoyed it! Thank you so much Debbie! 🤗♥️
I love the design, however I can’t seem to get the bottom quite right. I’ve attempted and taken it apart 3 times and now my cord is fraying at the end. I don’t think I’m doing the triangle thing correctly, but I just don’t know. 😣
It's so easy! So there should be a total of 12 knots all the way around the bottom line. Take 2 apart on the bottom row and one above them between. Then skip on knot on the bottom and unknot 2 more next to it, then one above those two as done previously. Keep doing that 2 more times and you should have your equal triangles. Hope that helps!
I struggled with it too lol. What helped me was putting a pin at every three knot triangle (leaving one knot between each triangle) to make sure my placement was right before going ahead and unknotting them.
You don't need to glue the square knot ends that you cut for the inside of the bottom part?
Hello Mandy! Thank you for your question. Yes, no need glue. The knots at the bottom are strong enough to withstand the weight of the bottle and its content. :)
I love the design but the video is quite fast. Don't think I could follow it. Can it be made as long in length as needed?
Hi, I love this pattern and your clear instructions and modelling. I am running a stall for a school charity event and we will be selling all of these materials. I wondered if you would be happy for us to direct people to your You Tube channel for how to make these to give them ideas? All proceeds are for a local wildlife charity.
Thank you so very much! I’m so humbled by your comment. By all means, much love! ❤️
Hermoso
👏👏👏👏❤️❤️❤️❤️
❤❤❤❤❤❤❤❤
Would it be OK if I make the whole thing with 4mm rope?
Hi Jessica, thank you for watching! 💖 Absolutely, I just happen to have 4mm and 3mm at the time of making and wanted to use both for this project.
btw, I suggest to add few more cm (20% more) with the measurements provided as you’ll be using a thicker cord for the body.
No se entiende nada cdo cierra la bolsa abajo😮
Hi, i love watching your videos ❤️
Can i ask, how long do i need the ropes to be when making holder for a 1.2 liters tumbler?
Diameter: 3.8"
Height: 11.2"
Thank you so much! That means a lot to me. ♡♡♡ I suggest adding 20% more on the length of cords provided. Hope this helps. :)
What size is the bottle?
Hello! Melanie, thank you for asking. Bottle size in the video has a height of 22cm and a base diameter of 7cm. This design best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm.
@@SilentKnot If you convert to inches 7cm in 2.75 inches that is way too small. Even a regular plastic store bought water bottle is larger than that. I don't think 7 cm is correct at all
❤
Ano pong gamit niyan. Cord po ba anong haba din.
hello! i used 3mm braided cotton rope :)
keren bat cok
ப்ளீஸ் இந்த ரோப் நேம்
😯👍👍👍🌸🌸🌸🥀🥀🌼🌼🌼😊💐💐💐