Thank you so much fellow makers and macrame enthusiasts for all your love and feedback. Please note the following and I have added this in the description. Measurements provided best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm. Strap length is adjustable from 70cm to a maximum of 132cm from the rings. IMPT NOTE: Bottle size in the video has a height of 18.5cm and a base diameter of 6.5cm. Please feel free to add few more inches/cm (body measurement) if the height of your bottle is taller and has a wider base diameter than 7cm. Thank you.
This is awesome. I was able to follow. The only change I made is I took the cords through the top loops the opposite direction and made kind of a tassel on the outside. It turned out cute.
Great design. Love the adjustible strap. Made it a little longer so i can use it like a sling bag. Also used paracord so it's a little easier to finish it off.
Amazing video thank you for sharing your pattern!! I’m having issues with the knots you start at 8:24 😅 for some reason I just can’t get them right! Is there a knot I can look up to help? Thank you!!
Hello! Great video! I havent tried doing any macrame projects. But after watching your tutorial, I am convinced to try it out. 🥰 already adding ropes to my shopping cart hehe. I have a question, do you think it will make much of a difference if I opt to use a 3mm rope instead of 4mm? Thank you so much and more power!
Aww! Thanks so much Paola! Your message really made my day. I'm so happy to know that this tutorial inspired you to try macrame. I can't wait for you to receive your ropes. I hope you have an amazing one. As for your question, 3mm is also a good size for this project. It would really depend on the height of your bottle so make sure to add a few more cm if it's taller than 24cm.
hiii I would like to ask you, is it okay if I use the 40 mm wooden ring? are they gonna still be lookin good, cause i don't want it to be like too big or too small hehe
Have made many in this design!! I found 120cm to be too short though, i made them 140 and had a bit more to play with when tying tops off. I used large costco contigo bottle, 1litre.
Great tutorial, but had the same problem as someone else, that 120cm for the bottle holder straps were too short for me and had problems attaching the ends to the two rings.
Hi! Help me please. In the beginning of the video you told take 8 pcs of 120 cm . But in the video you fix to ring twiced knots. Please, let me know what's the length of each knot? They are 60 cm or i should take 8 pcs of 240 mm and bend on a half ?
Hello, I came across your video in a search for making a cute and functional Macrame bottle bag. I was wondering what brand of cable did you use? or if you had an amazon link with how many yards to get for this project? I'm looking at the NOANTA brand and they have 3mm for 109 yards. I think this projects needs about 20 yards? I would probably need something like 25-30 yards for a 34oz water bottle.
3 anillos de madera de 30 mm: 1 para la base y otro para sujetar la correa. 8 titas de algodon 120cm de largo (de 4mm es el grosor de la cuerda) 2 tiras de 60 cm para hacer el nudo de las argollas laterales. 2 tiras de 400cm para la correa. 2
Hello I had just made a snake knots bottle wrap something like this one but in this you rope instead of paracords how many feet of rope you used can I use 550 paracord instead of ropes
Oh such a shame that I missed on this. I see that 550 cord is equivalent to 4mm with cotton rope. To be safe, I suggest adding 10-15cm more. Hope this helps and sorry for the late response.
Thank you, Austin! Sorry for any trouble. I have added a related video to the description: How To Tie A Four Strand Round Braid bit.ly/fourstrandroundbraid Nevertheless, I'm glad to know you have figured it out. Thanks for being here. Cheers!
Hello! Thank you for being here. Sorry I am not sure of your question. Did you mean how much rope did I use for this project? Kindly check in the description. Thank you! 🙂
What size (dimensions) water bottle did you use for the video? I love the design, but my bottle may be larger. Who’d have thought I’d be using so much geometry for crafting?
Hello! Thanks for asking. This design fits 500-700ml bottle with a height of 18-24cm. You may adjust the length of the cords accordingly and add a few cm between the knots if you have a bigger bottle. Hope this helps :)
Hello! Thank you for watching! 🧡 No glue needed for this, just used gathering knot and made it super tight. @17:44 I made a pretty similar one without the use of rings How To Make A Macrame Water Bottle Holder - Design No.2 (No Rings) | Macrame Tutorial ua-cam.com/video/w0E3hMZnSHI/v-deo.html
Hello! Thank you for your question. This may be late but here's some info about it. ✨ The bottle size in the video has a height of 18.5cm and a base diameter of 6.5cm. Please feel free to add few more inches/cm (body measurement) if the height of your bottle is taller and has a wider base diameter than 7cm. Hope this helps. Thank you.
Hello! Thank you for watching. Yes, it’s ideally for 500-700ml bottle. I’m using my own and no issue so far, just make sure to tighten the gathering knot and that the cord when pulled is in the middle of it.
Hi! :) thank you for asking. yes it is possible, just adjust the space between the alternating square knots to make it wider. Also, please prepare a longer cord in that case especially if your bottle is taller. Hope this helps.
Thank you so much fellow makers and macrame enthusiasts for all your love and feedback. Please note the following and I have added this in the description. Measurements provided best fit 500-700ml bottle with a height of 18-24cm and a base diameter of less than or equal to 7cm. Strap length is adjustable from 70cm to a maximum of 132cm from the rings.
IMPT NOTE: Bottle size in the video has a height of 18.5cm and a base diameter of 6.5cm. Please feel free to add few more inches/cm (body measurement) if the height of your bottle is taller and has a wider base diameter than 7cm. Thank you.
Love making functional items other than wall hanging and keyrings 😅 I’ll be making this bottle holder for sure!
😊😊
Made it! Going to wear it to a music festival. First macrame project. Thanks
Hi! Love the video but I'm really struggling with finishing the top of the bottle where you join the 8 strands together 😢
Just finished mine!! Love it. My first ever macrame project 🤓
Wow, great tutorial. I actually did it right the first time. Just finished and I am excited to start using it!
Yay! Thank you so much! 🤗 I’m so happy to know you did it. 🙌🏼 I love using mine as well and I can hang it anywhere, so convenient to use the strap. ❤️
Looks easy 💛 not sure that the real process will be also easy, but i really gonna try!
Thankyou for sharing your skill and know how. You make it look easy but i am going to give it a go. wish me luck
This is awesome. I was able to follow. The only change I made is I took the cords through the top loops the opposite direction and made kind of a tassel on the outside. It turned out cute.
Glad it helped you! Thank you so much, I can imagine the tassels. You're so clever. ♡♡♡
Great design. Love the adjustible strap. Made it a little longer so i can use it like a sling bag. Also used paracord so it's a little easier to finish it off.
Wow that sounds so awesome! Thank you so much! 💖 So happy to know you made it using my tutorial. Cheers! ✨
Love this project .My grand childrrn can do this😊
This was such a good tutorial! Thank you for taking us through this step by step! My bottle is very snug and cozy now :)
Hooray! Thank you so much and I’m very happy to know that. It means the world to me. 🥰😘💖
omg you braiding the strap backwards almost broke my brain haha took me a minute to figure out thats what you were doing lol
Ha, finally! That's it! Thanks 😂
Hi! I really like this vid! What is the braid called you use for the strap? I think I need someone to explain it verbal to me 😂🙈
Amazing video thank you for sharing your pattern!! I’m having issues with the knots you start at 8:24 😅 for some reason I just can’t get them right! Is there a knot I can look up to help? Thank you!!
Hello! Great video! I havent tried doing any macrame projects. But after watching your tutorial, I am convinced to try it out. 🥰 already adding ropes to my shopping cart hehe.
I have a question, do you think it will make much of a difference if I opt to use a 3mm rope instead of 4mm?
Thank you so much and more power!
Aww! Thanks so much Paola! Your message really made my day. I'm so happy to know that this tutorial inspired you to try macrame. I can't wait for you to receive your ropes. I hope you have an amazing one. As for your question, 3mm is also a good size for this project. It would really depend on the height of your bottle so make sure to add a few more cm if it's taller than 24cm.
😘
Thank you I made my bag thanks to your video!
You’re so welcome. I’m glad to know it helped you. Thank you for watching. 🥰
Beautiful work. Thanks for sharing 😍😃🙏🙏
Lindíssimo
Explicação ótima
hiii I would like to ask you, is it okay if I use the 40 mm wooden ring? are they gonna still be lookin good, cause i don't want it to be like too big or too small hehe
wow! thanks for the tutorial The music is good too. What song is that?
Have made many in this design!! I found 120cm to be too short though, i made them 140 and had a bit more to play with when tying tops off. I used large costco contigo bottle, 1litre.
Great tutorial, but had the same problem as someone else, that 120cm for the bottle holder straps were too short for me and had problems attaching the ends to the two rings.
Thank you for this!
You're so welcome! Thanks for watching! ♡
Me encantó, está hermoso...
great tutorial, beautiful product, thank you... but i recommend to use 130 cm insted of 120. :)
Hi! Help me please. In the beginning of the video you told take 8 pcs of 120 cm . But in the video you fix to ring twiced knots. Please, let me know what's the length of each knot? They are 60 cm or i should take 8 pcs of 240 mm and bend on a half ?
Can I add cords? Like use 10 instead of 8 or would that mess things up?
Very beautiful!
Thanks so much! ♡
Gracias muy sencillo
Thank you very much
You’re most welcome 🤗
Hello, I came across your video in a search for making a cute and functional Macrame bottle bag. I was wondering what brand of cable did you use? or if you had an amazon link with how many yards to get for this project? I'm looking at the NOANTA brand and they have 3mm for 109 yards. I think this projects needs about 20 yards? I would probably need something like 25-30 yards for a 34oz water bottle.
30mm wooden ring means the inside diameter or outer diameter?
práctico!
Parabéns 🎉 maravilhoso
Яка краса❤❤❤ Україна , щиро дякує!
3 anillos de madera de 30 mm: 1 para la base y otro para sujetar la correa.
8 titas de algodon 120cm de largo (de 4mm es el grosor de la cuerda)
2 tiras de 60 cm para hacer el nudo de las argollas laterales. 2 tiras de 400cm para la correa.
2
Hello I had just made a snake knots bottle wrap something like this one but in this you rope instead of paracords how many feet of rope you used can I use 550 paracord instead of ropes
Oh such a shame that I missed on this. I see that 550 cord is equivalent to 4mm with cotton rope. To be safe, I suggest adding 10-15cm more. Hope this helps and sorry for the late response.
Great tutorial, however I couldn’t get that braid down for nothing. I think I got it now but I must’ve rewound the video 20x or more!
Thank you, Austin! Sorry for any trouble. I have added a related video to the description: How To Tie A Four Strand Round Braid bit.ly/fourstrandroundbraid Nevertheless, I'm glad to know you have figured it out. Thanks for being here. Cheers!
And how long do you need to take the ropes? (I just didn't find it in the lesson)
Hello! Thank you for being here. Sorry I am not sure of your question. Did you mean how much rope did I use for this project? Kindly check in the description. Thank you! 🙂
Can you just make square knots for the strap instead of the braid?
Hey there! :) thanks for watching. Yes but I think it will be a fixed strap instead of adjustable.
Hi love this but what is the water bottle dimensions please??
Hello! ✨this design fits 500-700ml bottle with a height of 18-24cm. Hope this helps. Thank you 😊
New subby here :)
Loved it it's my first time to see an adjustable strap tutorial.. defenitely i'll try to do this soon.
Aww thanks! Your support in my craft really means a lot to me.
@@SilentKnot yes i did.. im only a beginner and i haven't starting any project yet hehe..
This is surely on my list.
Çok guzel bir model oldu ellerinize ve emeğinize sağlık ipin markasını ve numarası yazarmisin
Thank you so much, it’s 4mm cotton rope I ordered from Indonesia.
What size (dimensions) water bottle did you use for the video? I love the design, but my bottle may be larger.
Who’d have thought I’d be using so much geometry for crafting?
Hello! Thanks for asking. This design fits 500-700ml bottle with a height of 18-24cm. You may adjust the length of the cords accordingly and add a few cm between the knots if you have a bigger bottle. Hope this helps :)
How do you end the strap? Is it glued? I'm looking at the end that will not be wrapped. That is not shown in the video.
Hello! Thank you for watching! 🧡 No glue needed for this, just used gathering knot and made it super tight. @17:44 I made a pretty similar one without the use of rings How To Make A Macrame Water Bottle Holder - Design No.2 (No Rings) | Macrame Tutorial
ua-cam.com/video/w0E3hMZnSHI/v-deo.html
😍
hi mam,i would like to ask if how to measure the rope on the bottle?
Hello! Thank you for your question. This may be late but here's some info about it. ✨ The bottle size in the video has a height of 18.5cm and a base diameter of 6.5cm. Please feel free to add few more inches/cm (body measurement) if the height of your bottle is taller and has a wider base diameter than 7cm. Hope this helps. Thank you.
will it hold even if it's heavy?
Hello! Thank you for watching. Yes, it’s ideally for 500-700ml bottle. I’m using my own and no issue so far, just make sure to tighten the gathering knot and that the cord when pulled is in the middle of it.
Where did you buy the wooden rin po?
Hello Pamela! Thank you for watching. I bought it from Shopee, searched "wooden ring or macrame ring", then I selected size 30mm. Hope this helps. :)
What do you call this cord? Thanks :)
Hello! It’s 4mm twisted cotton cord. ;)
Nice but need to write down the size of the bottle so the strings are long enough!
Thanks so much for your feedback. I have added important note about the measurement in the description. :)
👏👏👏👏🤩👏👏
is it okay for a 32 oz/ 946 ml water bottle?
Hi! :) thank you for asking. yes it is possible, just adjust the space between the alternating square knots to make it wider. Also, please prepare a longer cord in that case especially if your bottle is taller. Hope this helps.
@@SilentKnot thank u very much 😊❤️
You’re so welcome 😘
Waoooo v nice n beautiful 💖i love it ❤️v v unique work v good
Plz give me😊
Thanks so much for watching! ❤️😘 I’m so happy to know you liked it. Where are you from? Pls send me a dm on ig @silentknot
👍🌺👏🤗🙏🥰
You are very sweet, thank you! 🙂