Meanwhile road bikers: "I just can't use a 1x setup with no front derailleur 😭 I miss some tiny gaps between shifts to keep my cadence at exactly 90 and my little legs get too tired"
Please, please, please use a derailleur hanger alignment tool between swapping derailleurs! This is best practice as mostly hangers are bent so always worth checking!
as someine with a destroyed knee from a ladder accident, just go for the lower gears. I now have a 11-34 on the back, and a 26-36-48 on the front. Need the lowest gear a lot. @@olivier8645
It's not as simple and, above all, cheap as it may seem. To switch from an 8-speed cassette and Claris derailleur to an 11-speed setup, you need to replace not only the rear derailleur, cassette, and chain but also the front crankset (due to the narrower chain) and the rear derailleur shifter, incurring additional costs. Usually, the hub that supports 8 speeds may not handle 10 speeds, so there's a concern about needing to change the hub as well. Additionally, the Ultegra derailleur won't work with the Claris shifter.
Cheap option For the rear mech is the 10 speed medium cage tiagra 4700 rear mech. This works with all 11 speed Shimano setups, but ironically it does not work on other 10 speed setups except For the tiagra 4700 shifters. Thank me later.
My other bike is fixed gear. Done this cassette thing on my adventure bike.46x30 chainrings, but think I can work out a 46x28 rig. The same range basically as 12 speed, but closer ratio using just 9 speed. 11-36 cassette. Tinkering is half the fun! I like shorter cranks and have 175mm now. Upgrade to hollowtech standard Samox, evenly spaced 4 arm 64mm bcd small 30 tooth ring and put 28 tooth in it's place. Probably go uphill 4mph at 80 RPM with a full touring load! Think the rear derailleur can just handle all that wrap. 9 speed chain can wear almost 1% before replacing, 12 speed. 5%.way cheaper to use 9 speed.
@@SajtosNokedli Exactly,...all i want is a bike that can take me to work and back home, im not an enthusiast, but im aware of the maintnence and i dont want to spend a fortune (Parts or tools)
If you already have a long-cage derailleur and your wheel has a freehub, it's quite reasonable to get a new cassette and chain. If you aren't looking at high-end components anyway, or for an older bike, you could buy a long-cage derailleur, cassette, and longer chain on the cheap or gently used all cheaply as well. Problem comes if you're trying to replace a cassette for a bike with a freewheel... then you basically need new wheels. I happened to find a very closely-matching wheel with a freehub (what you need for a cassette) for my folding bike, that was dirt cheap at a shop that was getting rid of unused repair parts... but this isn't likely to be the case for many.
Tip: get the Sunrace CSMS8 11-36 instead of the shimano one, even more range and it as a 12 tooth cog so you have 11-12-13-15 instead of the big 11-13 jump at the top end. shifts maybe a tad harsher but just as fast/good.
Sunrace cassettes shift really good. I have a 7 speed 13-28 sunrace cassette in the rear and it’s shifting amazing. Even with a cheap shimano acera derailer
@@ulukai_555 45-51(13%) is actually way less difference in cadence than 11-13 (18%) and, on the top end, jumps tend to be much more noticeable anyway. so yeah, its a big difference to have 11-12-13 instead of 11-13 on a road bike. or to put it different: you almost need to go almost 9kph faster for the 11tooth cog to have the same cadence again that you had on the 13 tooth one. thats a hell of a difference. in perspective, 45-51 is only around one kph difference.
I could use an up grade like that... My gears are slipping so freewheel forward and backward. To be honest that set up would be perfect for my daily an night commute
Anyone else remember the days when the largest rear gear was 25 and compact cranks werent a thing. If you needed more gears, you would need a triple. Most people, myself included, just got stronger because we didn't want to be that guy with the triple.
Can you do a video where we increase gears on the crankset in front ? I'd like to increase 2 gear to 3 gear and keep the 9 in back. I'm not an advanced rider, but need more middle gears.
you don’t need to go from 2 to 3 gears in the front, you would lose shift quality and chain retention by doing so. If you feel like you lack range then maybe your larger front chainring needs to be a bit smaller, you can have a shop source a new front chainring and you will be able to spin a little easier.
I also want to change the sprocket on my bike.. so it's hard to pedal uphill, that's why I don't have the money. It's nice because it's fun to ride a bike
Ok, 2 things, if you remove the chain first (something you will be doing anyway) then you will find it easier to remove the wheel and you won’t get the new cassette dirty. Next, just use a wolf tooth type adapter rather than buy a new RD, it’s significantly cheaper. 🙂👍🏻 Also quick question, how is this “lighter?” It’s a bigger everything?
But I say unto you, Love your enemies, bless them that curse you, do good to them that hate you, and pray for them which despitefully use you, and persecute you” (Matthew 5:43-44). Colossians 3:13 states, “Bearing with one another and, if one has a complaint against another, forgiving each other; as the Lord has forgiven you, so you also must forgive.” We were born sinners against God, but He loved us enough to send Christ, His Son to die for us.
eine Idee obwohl ich so kwine Ahnung was Rennrad betrifft habe!!!aber acht Gang Narbe hinten und eine Narbe am Tretlager bzw.die das Tretlager ersetzt...????😅🤔🧐✌️🤌💪👌🤙🤙🤝👍🌠🌠🌠🤦...2mal 8 Gang-Narbe sind Laut Mathematik 64 Gänge....ohne Schaltarm und das ganze Gewirr 🙏🙏🙏🤷 vielleicht vorne nochmals nen drei Ritzelkranz !!???hoffe konnte helfen 😅
"Do this" like it a cheap upgrade. 😂
you can go off brand for cheap
It would be easyer to buy a new bike
@@guilhermerizzo1984Got more insanely stupid jokes? Go on!
@@guilhermerizzo1984Yeah maybe a heavy ass sipermarket one. Cesettes are like 50 euros. Good derauliers are around 100 euros.
@@jurekgadzinowski2895Boyfriend forget the lube last night?
Thank you!
That’s an easy and cheap solution to fix this! Who would think about changing the cassette and derailer when you want lower gears?
seriously
Like it didn't even cross my mind
I thought you had to buy a new bike. Wow was I wrong.
anyone that is heavy and rides up big hills
😅😅
If anyone wondered, a Claris R2000 rear derailleur can handle a 36 teeth cog without a road link. I have been using it for a year without problems.
I have a doubt
Can we change the gear quickly? Like from 1 to 4 in rear gear
The construction worker dude with godly calves near my house with his steel bike: gears? What gears?
Meanwhile road bikers: "I just can't use a 1x setup with no front derailleur 😭 I miss some tiny gaps between shifts to keep my cadence at exactly 90 and my little legs get too tired"
@@thebrunosergetry to compete with a roadie on an mtb.
Bro really went all the way.
I'm like 'nah, a bit of B screw will make my SGS handle a big cassette just fine'
"need lighter gears? all you need is €500 in tools and parts"
3k
@69burtolaughing my fucking ass off 😂😂😂
This is an XT derailer and casette and probably a cn-hg95 chain. So its more like 150-200€
@@Vracka tell that to the bike part seller
xt derailleur?@@Vracka
Shimano chains should always be mounted with the logo facing outwards 😅
Shimano chains should always be inserted... into the bin. Replace with a fresh KMC.
Pseudo high tech claim added by marketing like rotation direction on Conti road tyres ?
"If you want X, do X"
Wow what a great suggestion it's amazing that you come up with such an amazing idea
Please, please, please use a derailleur hanger alignment tool between swapping derailleurs! This is best practice as mostly hangers are bent so always worth checking!
Alternatively learn how to pedal harder if you're short on tools and cash
and destroy your knees
as someine with a destroyed knee from a ladder accident, just go for the lower gears. I now have a 11-34 on the back, and a 26-36-48 on the front. Need the lowest gear a lot. @@olivier8645
Dumb take....
@@olivier8645evolve your knees *
I can! My other bike is fixed gear. But on a loaded touring bike?
It's not as simple and, above all, cheap as it may seem. To switch from an 8-speed cassette and Claris derailleur to an 11-speed setup, you need to replace not only the rear derailleur, cassette, and chain but also the front crankset (due to the narrower chain) and the rear derailleur shifter, incurring additional costs. Usually, the hub that supports 8 speeds may not handle 10 speeds, so there's a concern about needing to change the hub as well. Additionally, the Ultegra derailleur won't work with the Claris shifter.
What are you talking ? The original cassette had 11 cogs. Or are you referring your own setup ?
@@gerrysecure587411? Claris? 😅
You right!
My dad helped me make something kinda like this to my mountain bike, I love it, a mountain bike that can still go very fast
At least we get satisfaction 😌😌
You could also get a Wolf Tooth derailleur hanger extender instead of a new derailleur. I’ve used them before and they work flawlessly.
Does tge angle not become off?
@@snorttroll4379based from experience, no it only boosts the reach of the rear deraillure
I had a Wolf tooth extender put on my hardtail mtb to get a lighter lower gear. Been riding the same terrain as before and had 0 problems 🚵♀️
Used a cheap mech hanger extender with a sora 9 speed on a 1x gravel bike and it worked with a a 40t at the back no problem.
my alivio works with 42t maybe with extender it can work 46t and higher since many done that before
Cheap option For the rear mech is the 10 speed medium cage tiagra 4700 rear mech. This works with all 11 speed Shimano setups, but ironically it does not work on other 10 speed setups except For the tiagra 4700 shifters. Thank me later.
Sram is better
Does it work with 30 plus teeth?
My other bike is fixed gear. Done this cassette thing on my adventure bike.46x30 chainrings, but think I can work out a 46x28 rig. The same range basically as 12 speed, but closer ratio using just 9 speed. 11-36 cassette. Tinkering is half the fun! I like shorter cranks and have 175mm now. Upgrade to hollowtech standard Samox, evenly spaced 4 arm 64mm bcd small 30 tooth ring and put 28 tooth in it's place. Probably go uphill 4mph at 80 RPM with a full touring load! Think the rear derailleur can just handle all that wrap. 9 speed chain can wear almost 1% before replacing, 12 speed. 5%.way cheaper to use 9 speed.
Fixed gear bikes are only for show
Oah, I love clips like that!! Wonderful even when I do stuff like that everyday for twenty years now. Bicycles are my life! ❤
Forget the parts, i can imagine that the tools he is using worth more than my bike
You can do the same with 5€ tools. The only real difference is that low end tools won't survive a season
@@SajtosNokedli Exactly,...all i want is a bike that can take me to work and back home, im not an enthusiast, but im aware of the maintnence and i dont want to spend a fortune (Parts or tools)
Bruh pliers and an old chain and you good, stop winging, I was broke as holy fuck and I managed???
@@Floridamarrr im broke too, i dont need expensive matched tools , i just need good tools
@@ElectroWolf_Arts pliers and a chain and of you go on your Mary way
Omg is this the polish best mechanic! SickBiker!
How I wish I had those tools. But I'd probably use them once in a lifetime
If you already have a long-cage derailleur and your wheel has a freehub, it's quite reasonable to get a new cassette and chain.
If you aren't looking at high-end components anyway, or for an older bike, you could buy a long-cage derailleur, cassette, and longer chain on the cheap or gently used all cheaply as well.
Problem comes if you're trying to replace a cassette for a bike with a freewheel... then you basically need new wheels. I happened to find a very closely-matching wheel with a freehub (what you need for a cassette) for my folding bike, that was dirt cheap at a shop that was getting rid of unused repair parts... but this isn't likely to be the case for many.
I just love the sound of shifting gears.
same here...especially a nice new clean setup....there's a point where you can almost hear the cogs ringing as the chain leaves it... love that
Tip: get the Sunrace CSMS8 11-36 instead of the shimano one, even more range and it as a 12 tooth cog so you have 11-12-13-15 instead of the big 11-13 jump at the top end. shifts maybe a tad harsher but just as fast/good.
Big jump? 😂
What about the 45-51 on the XT cassette?
@@ulukai_555 I have 24-34 jump in 7-speed megarange freewheel but on higher end 2 teeth difference is affecting cadance much more than you thought
Sunrace cassettes shift really good.
I have a 7 speed 13-28 sunrace cassette in the rear and it’s shifting amazing. Even with a cheap shimano acera derailer
@@ulukai_555 45-51(13%) is actually way less difference in cadence than 11-13 (18%) and, on the top end, jumps tend to be much more noticeable anyway. so yeah, its a big difference to have 11-12-13 instead of 11-13 on a road bike. or to put it different: you almost need to go almost 9kph faster for the 11tooth cog to have the same cadence again that you had on the 13 tooth one. thats a hell of a difference. in perspective, 45-51 is only around one kph difference.
Parts manufacturers LOVE this one simple trick!
changing front chain rings is easier and cheaper
Changing the rear cassete gives you a wider range of wider gears which you can shift into more regularly
Ultegra chainrings are far more expensive and don't achieve the same change in ratio, you lose top end to gain bottom.
Sprocket?
Depends on what is the worst worn.
@@chemeofficialyes, but its called a chain ring.
Perfect. I did that to mine as well.
Get a new cassette and derailer? 😂
basically 😂
And chain 😬
I could use an up grade like that... My gears are slipping so freewheel forward and backward. To be honest that set up would be perfect for my daily an night commute
Awesome hack. Thank you.
Anyone else remember the days when the largest rear gear was 25 and compact cranks werent a thing. If you needed more gears, you would need a triple. Most people, myself included, just got stronger because we didn't want to be that guy with the triple.
Can you do a video where we increase gears on the crankset in front ? I'd like to increase 2 gear to 3 gear and keep the 9 in back.
I'm not an advanced rider, but need more middle gears.
you don’t need to go from 2 to 3 gears in the front, you would lose shift quality and chain retention by doing so. If you feel like you lack range then maybe your larger front chainring needs to be a bit smaller, you can have a shop source a new front chainring and you will be able to spin a little easier.
I am thinking about doing this. I broke the frame on my old mountain bike so the components are free and are out-of-date for any other use.
I also want to change the sprocket on my bike.. so it's hard to pedal uphill, that's why I don't have the money. It's nice because it's fun to ride a bike
I love this. I didn’t realize how interested I am with this. I would love to learn
Ok, 2 things, if you remove the chain first (something you will be doing anyway) then you will find it easier to remove the wheel and you won’t get the new cassette dirty. Next, just use a wolf tooth type adapter rather than buy a new RD, it’s significantly cheaper. 🙂👍🏻 Also quick question, how is this “lighter?” It’s a bigger everything?
Если вы думаете что это легкая работа то вы глубоко ошибаетесь.
Legends still use shimano sis
Wow!
Easy to install.
Best thing about this is that not only does it make your bike lighter it makes your wallet lighter as well
Mit viel tatmtam ein paar Sachen gewechselt was ja jeder hinbekommt. Aber beim montieren der Kette ordentlich was falsch gemacht haha. 👎🏽
It is so satisfying
I got back the 3 speed sturmey archer.
Adequate and maintenance free.
Long live rhe chopper 😂
Check derailleur capacity! You can overpower the rear derailleur and then you've wasted a cassette
Nice Ice Tech rotors
Bruh gotta get that crank inspected for delamination! #11 speed Armageddon
Short Cage Rear Derailleur 11-speed. capacity - 33T.
I can smell the geese
Bike mech asmr❗️👈😄
Savings?
Very good 👍
Who needs lower gears? I live in a very mountainous region and i wish my gearing was higher lmao
How about degreasing the new chain first?
Getting such part to repair bikes here in Ghana is extremely stressful..
How can I get easy access to these parts...?
How long does a job like this really take? I wanna learn
But I say unto you, Love your enemies, bless them that curse you, do good to them that hate you, and pray for them which despitefully use you, and persecute you” (Matthew 5:43-44).
Colossians 3:13 states, “Bearing with one another and, if one has a complaint against another, forgiving each other; as the Lord has forgiven you, so you also must forgive.” We were born sinners against God, but He loved us enough to send Christ, His Son to die for us.
get a new cassette and derailleur? i never could've guessed
Yeah.. make sure your derailleur can handle the capacity of your new cassette. 9r you just destroyed your derailleur.
Don't you have to change the front sproket too to fit with the new short chain?
Ładnie Daniel Ci to idzie 👍👍
I need your old gears
Skills ❤
Ok but now won’t you also need a new STI the new gears? Considering tiagra and other lower specs are 9 speeds and 105 and ultegra are 11 speeds
El que sabe sabe un profesional Malina👍👍👍
how can i figure out if i can fit 1x10 speed on 1x8 speed bike
Yup; it’s some kind of bicycle.
10-36 all the way baby
Alguien sabe si las que venden en AliExpress funcionan bien? Y es confiable?
How can i find the used cassette for my bicycle
eine Idee obwohl ich so kwine Ahnung was Rennrad betrifft habe!!!aber acht Gang Narbe hinten und eine Narbe am Tretlager bzw.die das Tretlager ersetzt...????😅🤔🧐✌️🤌💪👌🤙🤙🤝👍🌠🌠🌠🤦...2mal 8 Gang-Narbe sind Laut Mathematik 64 Gänge....ohne Schaltarm und das ganze Gewirr 🙏🙏🙏🤷 vielleicht vorne nochmals nen drei Ritzelkranz !!???hoffe konnte helfen 😅
Derailer install(easy) derailer tuning, nope ill die before I try that shirt again I can never get it right
how can I order this thing?! what it's called?
Где бы ключи эти специальные приобрести !?
Can you travel in time?
@becomebikemechanic Did you upgrade to the R8000 front derailleur?
How is this lighter when the derailleur and cassette are larger? More metal, more weight.
Other cycle me lag sakta hi ya nahi
Can I get the old parts please
J'avais une 13/19 sur mon vélo !!! Fallait envoyer des watts !!!😁😁😁🦵🦵🦵💪
Can I be able to do it myself .
Good bike
How good!?????
What are comments on 😭
That cassette is like 50 bucks. I just bought one
JODER MACHO ENDURERO VAYA PIÑONAZO ESO SUBE COMO UN AVIONACOOO DE COMBSTE👍👍👍👍
Si no te sirve el descarrilador q sacaste mándalo para mi casa 😅
Do this? You mean "buy this"?
If u have a 10-cassette , can u change it with a 11-cassette ?
Saying it like it's a hack 😆
That cassette was removed way too easily
so you put a mtb cassette on a road bike?
Why not?
@@slawomirb1984no needs for a
34, I use 32 on my road bikes and it's perfect and no hassle to climb any hill
Esto cuesta mas que un kit de arrastre completo para moto...
I see you skipped adjusting limit screws
Before insert chain, it's better to adjust the limit screws by pushing the cage inwards
Works fine either way.
Cómo enderezar un disco o plato de freno si está un poco torcido
You need lighter gears to lug those heavy hydro disc assemblies.
You prefer steam engines to combustion too ?
Comments like these are typically made by weekend warriors with a 30+ BMI.
@@user-d32658he's right isint he!😐
The chain is in the wrong direction!!😂😂😂😂😂
Shimano 105 for save money, it's better choice for common user.
Bro how many gear on it
F***ING GENIOUS!!!
The different with the rear derailleur?
Nah bro, imma just diet to lose weight and become lighter
And if this dosen't enugh you can put a 12s with 52-8 teeth casette