Your chain is backwards. Shimano 10, 11, & 12sp chains are directional. The stamping on the outer plates faces out, the inner plates have no stamping, they face in. The chain will work backwards, just not optimally
Went 50 miles today with absolutely no skip!!!⭐️⭐️⭐️⭐️⭐️ Thank you 👍 Thought I was gonna have to replace my cassette due to wear. As a waxed chain user, these connex links are great!!!
Thank you a lot. I was wondering why it skips on the 11 tooth cog. Lol. Was almost getting frustrated with the thought that connex chains do not work with 11 tooth sprockets of shimano. Thank you for this simple video. Easy.
The KMC reusable links can only officially be connected / disconnected 5 times . You can use them more but they get a bit loose. I wax my chains so they last a bit longer. I also have the connex wipperman links. When the links are joining the bottom chain span you install the slots so they look like a frown ( Frown Down ) which also means that the speed number on the side of the link plates is readable the correct way up ( with a small stamped line underneath the number ).
What if I installed it correctly, but chain keeps making clicks noises as if it's trying to go gear up (on the lowest gear)? Derailleur is perfectly tuned recently, and nothing like that happens with Shimano quick-link (I checked)
Hard to say. My first thought would be that you’re cross-chaining but you said it wasn’t happening with the other quick-link. Did you figure it out since you posted this?
Your chain is backwards. Shimano 10, 11, & 12sp chains are directional. The stamping on the outer plates faces out, the inner plates have no stamping, they face in.
The chain will work backwards, just not optimally
I did not know that…I’ll look into fixing it! Thanks for the info.
I was thinking the same thing.
Went 50 miles today with absolutely no skip!!!⭐️⭐️⭐️⭐️⭐️
Thank you 👍
Thought I was gonna have to replace my cassette due to wear.
As a waxed chain user, these connex links are great!!!
Awesome! I’m glad it was helpful. Thanks for watching!
Thank you a lot. I was wondering why it skips on the 11 tooth cog. Lol. Was almost getting frustrated with the thought that connex chains do not work with 11 tooth sprockets of shimano. Thank you for this simple video. Easy.
I’m glad it was useful! Thanks for watching!
Are these links good for non-derailleur bikes, or bikes without chain tensioning devices?
The KMC reusable links can only officially be connected / disconnected 5 times . You can use them more but they get a bit loose. I wax my chains so they last a bit longer. I also have the connex wipperman links. When the links are joining the bottom chain span you install the slots so they look like a frown ( Frown Down ) which also means that the speed number on the side of the link plates is readable the correct way up ( with a small stamped line underneath the number ).
Thanks for the video. Had this problem and my connex is indeed upside down. Hope this fixes the clunking!
Thanks for watching! I hope it helped.
Great video showing the proper way to use. Just ordered the Connex 11S8 chain ~~~ By the way, have you tried with any Shimano 11 speeds chain ?
I can’t say for sure…although this bike has a shimano group set as stock so I can only assume it’s a shimano chain.
What if I installed it correctly, but chain keeps making clicks noises as if it's trying to go gear up (on the lowest gear)? Derailleur is perfectly tuned recently, and nothing like that happens with Shimano quick-link (I checked)
Hard to say. My first thought would be that you’re cross-chaining but you said it wasn’t happening with the other quick-link. Did you figure it out since you posted this?
Another simple way to install is outer facing plate speed number is upright when in lower chain.
their chains 9sp skip over on 11t cog new cog new chain new chainring and it skip over on 11t cog on castte manufacture fail?
I don’t think it was a manufacture fail here. I put the quick link on incorrectly.
I’ve been fighting this thing for an hour and can’t make it work!☹️