Dry Curing Chamber, Easy Built
Вставка
- Опубліковано 14 тра 2023
- Hi friends! Finally I have a nice, big size commercial fridge and I'm excited to share it with you!
In this video I will show you how I built my little bar fridge chamber and we will go over a few Tips and a small secret on how to balance your fridge temperature and humidity.
If you have any questions please leave your comments and I will be more then happy to answer them.
Humidity and temperature control sensors by Inkbird.
Timer relay: www.amazon.ca/dp/B07F1C4W3M/r...
Can I ask for a link to the outlet timer you are using to shorten the cycle on the cooling please?
Here is the one I use, 120V
www.amazon.ca/dp/B07F1C4W3M/ref=sspa_dk_detail_10?psc=1&pf_rd_p=d8c43617-c625-45bd-a63f-ad8715c2c055&pf_rd_r=7MGH8MHT4P50WAPRHYW0&pd_rd_wg=LITCc&pd_rd_w=wVJrk&content-id=amzn1.sym.d8c43617-c625-45bd-a63f-ad8715c2c055&pd_rd_r=ad8aacf6-6cc8-4ea0-9ef1-5b0bedacfeee&s=automotive&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw
Can you provide more details on the timer? How it is wired? I am having the same issue with the excessive dehumidifying, I am also starting with a bar fridge.. Also, do you have a link to the timer from Amazon?
Thank you!
Hey! Check discription, it's in discription the link. Wiring is very simple, but some guys might be confused so I can actually make a detailed video, explaining. Follow me here and I will make one this weekend for everyone 👍
@@westcoastcharcuterie sounds good! Thanks again.
Just out of curiosity: in your experience how does having it on cooler side(say 50.6-51f) effect the product?
I must be missing the link to the timer in the description…this is your description: Hi friends! Finally I have a nice, big size commercial fridge and I'm excited to share it with you!
In this video I will show you how I built my little bar fridge chamber and we will go over a few Tips and a small secret on how to balance your fridge temperature and humidity.
If you have any questions please leave your comments and I will be more then happy to answer them.
Humidity and temperature control sensors by Inkbird.
@@ironblud I usually run on average 12.5-13°c so that is like 52-53°F I believe. In my experience I noticed that in higher temp the mold and bacteria develops flavours much better then really cold temperatures. If you have inkbird temperature controller, you can easily set up your temperature however you want
@@ironblud thanks for correcting me, I just shared it in other comments. I will update now.
Here it is:www.amazon.ca/dp/B07F1C4W3M/ref=sspa_dk_detail_10?psc=1&pf_rd_p=d8c43617-c625-45bd-a63f-ad8715c2c055&pf_rd_r=7MGH8MHT4P50WAPRHYW0&pd_rd_wg=LITCc&pd_rd_w=wVJrk&content-id=amzn1.sym.d8c43617-c625-45bd-a63f-ad8715c2c055&pd_rd_r=ad8aacf6-6cc8-4ea0-9ef1-5b0bedacfeee&s=automotive&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw
Sick
I noticed that you're passing wiring through the door. Is there not a gap being made in the gasket that way? Or you found a solution for it? I have a similar small fridge only with glass door that I'm working on at the moment.
Yes I just did for both fridges from the side in the bottom corners and it worked great. I didn't want to drill holes and run wires other way. I sold my little fridge, was very easy to remove all equipment and I sold it as perfectly functioning fridge. Did the same with a glass door one. Ran all wires in the bottom corner and that gap is actually so small that nothing ever can get in. Wires are thin, so it never been an issue, doors close properly too.
Yeah I get your point. I'm not sure if there's tubes in walls of this fridges with cooling backplate, so at this time my greatest concern is that if I drill holes I may kill the fridge. That is why I'm interested in trying to do it how you did. Also my equipment is a bit different but the principle is the same.
@@hammertiming8423 @hammertiming8423 I'm sure it will be fine. That's why I don't want to drill any holes in the fridges.. if something does not work you can always adjust and make changes, but once the holes are drilled, you can't go back..
Another tip, if you fridge is cycling to often, put your sensor in an empty glass bottle
You was right, I hotglued everything through the door and thickened a bit the area where the gap is, and there's no gap at all now. So far in the last 24h temperature and humidity is constantly in the parameters i initially setup. I'll try to put sensor in a bottle now to see if anything changes, cheers.
@@hammertiming8423 Yep, great! Keep testing! Don't forget once you start loading fresh products, your humidity will go up to 85-87% but it's ok, it will stabilize after couple weeks and if you getting green mold you will need to install small fan like I did to circulate the air
how well does that work?
Really well! I had amazing products coming out of this little one and now I upgraded to full size commercial fridge.
@@westcoastcharcuterie 1) On average,:
- how often do you need to fill the humidifier tank?
And
- how often do you empty the dehumidifier?
Great video, thank you!
@@SS-pi2yi during winter months I can easily go about a month without refilling water and maybe 3-4weeks on dehumidifier, but in summer months or if you have a lot of fresh products it can cut down to 2-3weeks. During summer fridge cycles much more often, builds up more moisture, etc.. but average 3-4 weeks. You can safely go on vacation haha! One thing I would highly recommend is get wifi thermometer and set up alerts, it already saved me once when my fridge died all the sudden! It's extremely useful
@@westcoastcharcuterie ah yes wifi monitoring is a great tip . Is it a special type of humidifer that one should use in this curing chamger application ? like a cool mist ? or warm mist or ultrasonic or evaporative etc? What type is the one you are using? (or simply make/model # etc)
- thanks again!
@@SS-pi2yi I used the cheapest available haha. Do not buy something fancy, electronic screen etc.. If you ever lose power and it comes back on, you are safe and your humidifier will be back in service. Electronic ones you will have to turn it back on. Simple, cheap things work best in this situation!
Here is exactly same as mine:
www.amazon.ca/Cool-Mist-Humidifiers-Bedroom-Ultrasonic/dp/B0BL1V7QQ3/ref=asc_df_B0BL1V7QQ3/?tag=googlemobshop-20&linkCode=df0&hvadid=583487178883&hvpos=&hvnetw=g&hvrand=12472926327047616043&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9001503&hvtargid=pla-1918365495067&psc=1&mcid=15e3230567b638ce97c59670699cf7e9