It would be cool if you put links to the parts you used in the description. For instance the magnets and the wire. The videos you make are great. I really enjoy watching them.
I can't help but think that if you fashioned a pick coil along the path of your neodymium magnets, I know this will increase the drag, but you could wind the p/u coil with twice as many winds and feed it back via diode, better yet through an LED, so you can see it working.
Hello I made this engine and it works very well it never starts alone I have to push it a little it is already running at 0.8 v about 17 mA, at 0.9 v 19 mA, at 1 v 22mA and at 1.5 v 25mA Well done! and thank you. Hello from Belgium j'ai fais ce moteur et il fonctionne très bien il ne démarre jamais seul il faut que je le pousse un peu il tourne déja à 0.8 v environ 17 mA, à 0.9 v 19 mA , à 1 v 22 mA et à 1.5 v 25 mA Bravo ! et merci . Bien le bonjour de Belgique
Nice expirment Reed Relay Function is using as inter changeablity to electromagnetic coil as a triggering switch as attactraction & deflection ( make even & break even power switch of Reed Relay )
I thought Spanish but yeah possibly Italian. No way Indian. Trecktom, where are you from? You've obviously never met an Indian before (or Italian / Spaniard)
Chuckiele The coil would interfere with all the magnets at the same time. It only works because it affects one magnet at a time. The switch would also be affected by all the magnets at the same time. Never mind how are you going to stop the wire from twisting up without a lot of engineering.
If the coil is out of center, it still affects all magnets, but it affects the ones closer stronger than the ones further away, the switch would have to be out of center in the approriate angle aswell but it would have to be much less sensitive because its so close to the other magnets, then both of these objects would have to be attached to the wire that is holding the can but this time will be fixed and not rotating itself and finally for the connections outside, there are only two points that arent rotating themselves, and these are the points where the wires go through, so you would have to use the wire for the connections and that for need to seperate it in the middle and reattach it together with an insulator. Or you could just buy a pulse motor with outside rotor. :D
Mohit Kushwaha When the magnet gets close to the coil, you need something to shut off the coil so the magnet doesn't return the other direction. The magnetic switch is placed in just the right spot so that it turns off the coil when the magnet on the other side gets close, thus allowing the magnet to hold its momentum. And the process continues. Basically without the magnetic switch, the can would just be a rotational oscillator, which isn't very useful.
i think you would be interested in this as well on how a railgun works ua-cam.com/video/uVyBEkaqRqY/v-deo.html also your device can work better if the magnet was closer. to the coil I assume.
I think you're putting this experiment way out of context. Ludic Science does these kind of videos to teach people how things works on the most basic side, allowing unexpert viewers to understand the little things that makes our world.
From a Canadian ! Trump is working fine. The FOX News is the only station that gives him credit for what he is accomplishing. Sure he has some rough corners, but if he was given full credit for what he has already done, his chip can would be spinning at full power.
Like theway you show a simple build & exsplain the way it works! Thank you!
It would be cool if you put links to the parts you used in the description. For instance the magnets and the wire.
The videos you make are great. I really enjoy watching them.
Most of my stuff is recycled from old equipment and almost all parts can be found at ebay also. Thanks for your comment!
Great work sir, using the drawer light was very clever.
I can't help but think that if you fashioned a pick coil along the path of your neodymium magnets, I know this will increase the drag, but you could wind the p/u coil with twice as many winds and feed it back via diode, better yet through an LED, so you can see it working.
Hello I made this engine and it works very well
it never starts alone I have to push it a little
it is already running at 0.8 v about 17 mA, at 0.9 v 19 mA, at 1 v 22mA and at 1.5 v 25mA
Well done! and thank you. Hello from Belgium
j'ai fais ce moteur et il fonctionne très bien
il ne démarre jamais seul il faut que je le pousse un peu
il tourne déja à 0.8 v environ 17 mA, à 0.9 v 19 mA , à 1 v 22 mA et à 1.5 v 25 mA
Bravo ! et merci . Bien le bonjour de Belgique
Is repulsion better than attraction as it gets to use its full feild ?
Great 👍🏼 video......Will the motor turn faster if you add an iron core into the copper winding? Stronger magnetic field...
if you glued the magnets on the inside, it would be more efficient because of less friction with the air.
But more distance from the coil so less effecient
If you replace the battery with proper capacitor, can you create resonant circuit and recharge the capacitor continuously?
I sed it once, il say it again. This guy is genius!
Nice. How many winds on the coil or whats the resistance accross the coil.
Reminds me of a rock tumbler. Cool.
super
go for higher impedance coils to run you motor at 50millivolts or lower.
Why?
Put a small solar cell panel to the input and it can run for free when lighted!
Nice expirment Reed Relay Function is using as inter changeablity to electromagnetic coil as a triggering switch as attactraction & deflection ( make even & break even power switch of Reed Relay )
This is great. Good job.
+1 I agree 100%
I am here because I am building one, just a hooby, perpetala motion, ha ha but we are getting close. Sure is fun to try the impossible.
Is the magnetic switch needed? Is there any kind of substitute I can use for it?
Hey Ludic Science, great Video!! I am currently trying to build this, too. I have question: How many turns did you wind for the coil? Thank you :-)
How would you do the wiring with another coil on the other side?
In series, same phasing.
Very nice idea!
I have question: when i will rotate chips can by hand, voltage will be inducted?
Yes
Could you make a video on inductive levitation please ?
I think it’s so cool and I’d like to know more about it !!!
Pretty good idea. thanks for sharing.
i love india because of you
India? You think he's Indian?
i think so , because this accent is close to indian accent in english
Oh My God , That sounds embarrassing ... and funny that it`s been a year or more i thought he`s indian XD
I thought Spanish but yeah possibly Italian. No way Indian. Trecktom, where are you from? You've obviously never met an Indian before (or Italian / Spaniard)
T Riddle from egypt ... i meet them every single time search for anything XD
Cool man, it could be used with solar power to run a fan...etc.
But what is the RPM (Rounds Per Minute) ? (in relation voltage maybe)
Why bother, its gutless and inefficient.
Nice work I try
i thought it would be another induction motor... pls make 555 based variable frequency induction motor
Hi how many turns on the magnetic wire and what lenth roughly please
Put the magnets on the inside of the can.
Solder Joe That's not a half bad idea, good thinking.
And put the coil and switch inside aswell :)
Chuckiele The coil would interfere with all the magnets at the same time. It only works because it affects one magnet at a time. The switch would also be affected by all the magnets at the same time. Never mind how are you going to stop the wire from twisting up without a lot of engineering.
If the coil is out of center, it still affects all magnets, but it affects the ones closer stronger than the ones further away, the switch would have to be out of center in the approriate angle aswell but it would have to be much less sensitive because its so close to the other magnets, then both of these objects would have to be attached to the wire that is holding the can but this time will be fixed and not rotating itself and finally for the connections outside, there are only two points that arent rotating themselves, and these are the points where the wires go through, so you would have to use the wire for the connections and that for need to seperate it in the middle and reattach it together with an insulator. Or you could just buy a pulse motor with outside rotor. :D
Can you please show how to make a 1.5vdc to 5vdc converter where I can draw at least 100mA. People sometimes post just rubbish on youtube.
very good
Will it run with the pos/neg wires shunted after the battery is removed?
No
LS, thanks for replying. Just wondering of the coil still had any voltage left to cycle. :)
So is the magnetic switch acting as a transistor?
Kind of more the transistor is acting like the motor magnets and reed switch
Thanks
Ludic sir why we need a magnetic swith for this pulse motor
Mohit Kushwaha When the magnet gets close to the coil, you need something to shut off the coil so the magnet doesn't return the other direction. The magnetic switch is placed in just the right spot so that it turns off the coil when the magnet on the other side gets close, thus allowing the magnet to hold its momentum. And the process continues.
Basically without the magnetic switch, the can would just be a rotational oscillator, which isn't very useful.
Please, can see diagram?
Best ever
amazing
Great!
Chips can pulse a motor xD
you can make a little fan :)
.....or hall sensor
超讚的說，馬上按個讚的說
Cool
Parabéns.
Ludic science plzz make a video on ZVS driver
Legal !!
please show us a simple fm radio circuit
Free dish card REPAIR
Its not a KitKat can, its a Pringles Can
muito bom
i think you would be interested in this as well on how a railgun works
ua-cam.com/video/uVyBEkaqRqY/v-deo.html
also your device can work better if the magnet was closer. to the coil I assume.
Who want to see it run at 0.25 volts. Run it at 12v and see it go crazy fast, that's why everyone wants to see!
Like if you agree
It may be unless, the circuit can handle the voltage...
the switch would wear out in seconds
Then use a mosfet or transistor
I think you're putting this experiment way out of context. Ludic Science does these kind of videos to teach people how things works on the most basic side, allowing unexpert viewers to understand the little things that makes our world.
Thats true but I still was interested in how much this basic circuit can take before it blows up.
Hračky pro děti.
Pringles in Electronics HAHAHA like trump in America
Soundoom It's weird yet it works
From a Canadian ! Trump is working fine. The FOX News is the only station that gives him credit for what he is accomplishing. Sure he has some rough corners, but if he was given full credit for what he has already done, his chip can would be spinning at full power.
Electro Tech - He's our president. Even if you don't like him, don't slander him in that manner. Show some better respect.
😴😴😴😴😴😴
this is fake he is using air blowing