Do you agree that our Coppercoat application will be a success? Please leave a comment below... Have you used Coppercoat antifouling? Would you like to see video from one of the many guys we interviewed that have used Coppercoat happily for many years...it was too long and off topic to include that Coppercoat review in this diy video, but let us know if you would like to see that soon. Please ask any question you have about our Coppercoat application or its future success if you are watching this months or years from now about whether it turned out a success or a failure...Certainly that will tell us if the application of Coppercoat can tolerate some variation in its application Please let us know your vote...so you think we will have a failure or success with this application of Coppercoat?
Great news to hear of your Coppercoat success. We hope we will be able to say the same. It sounds likr our situations wwre similar in that we had to do a major blister job...so it was a good time to apply Coppercoat! There are some bad applications of it out there, and of course the failures always make the headlines, but of all the people we have spoken directly to, Coppercoat has been a success on the majority of boats. But a bad application of Coppercoat can really send people running when whatever the applicators applied probably would have been a failure! -Rebecca
Your hull really looks great....super fair and smooth! That's interesting about recommending finer sandpaper to burnish the coat. From what others have written, glossy varnish resists mildew better than satin because the smooth surface makes it difficult for the mildew to get a foothold. Sounds like the same thing with coppercoat. I've been thinking I would try it with my project boat, but it sounds as though finding enough people willing to help could be an issue for me. There is something in the video that has me puzzled: at 8:30, there are what appear to be strips, raised areas, on the port side of the rudder. Are my eyes playing tricks on me?
Patrick Childress Sailing sailing Britican had some issues with their coppecoat, they redid it 3 times, and now waiting for the last layers result. Edit. And you addressed that already 👍🏼
Yes. We think that was an application error...and we pray that we didn’t make the same mistakes that the pros did. At least if we did, it didn’t cost us 10-15k!! Their second application was really an application ...it was a patch job and the patches worked. So it was just the original Coppercoat application that was the problem. Application is everything with Coppercoat and fingers crossed the issues we had were overcome properly. -Rebecca
Patrick and wife. I think your process was completely appropriate, in lew of conditions and weather , also a hardy , cheers for doing the work that you have in , well , less than first world sheltered and air-conditioned boat yards . Says an awful lot about you two's fortitude. Again, cheers . From California..fair winds folks.
Thank you, William. It was a long difficult haul out but Brick House is far better for it. Emanuel, Sip, Sipo and Telanti, as well as some of the others who spent time on this project, were great synergy to get me going, and keep the process going, pretty much 7 days a week till complete.
Hi Patrick & Rebecca! Great video on the Coppercoat. That product looks so pretty on a boat! I hope it works out and it appears you did the best you could considering the circumstances plus you had a pretty good crew helping you. Look forward to seeing videos showing how the CC is holding up on Brick House. Thanks for sharing!
Haha.nope not a chance I will kill him over a Coppercoat Application! He did the very best with the situations as they occurred. Now we will all know if the mistakes that the original applicators of Briticans Coppercoat made small mistakes intelligently...or if they made major blunders. I am afraid that we made enough mistakes during our application of it that we are going to have a failed Coppercoat application. But if it succeeds, then that says to me at least that that original Coppercoat installer really made some major mistakes OR that Britican has a unique problem on their boat that is inhibiting the effectiveness of the a Coppercoat epoxy. -Rebecca
I love this blog, i left my native SA a long time ago, but in my student years i used to work in a factory building houseboats alongside incredibly skilled men who trained on the job and did an excellent job at fiberglass, cabinet making and vacuum press lamination and moulding. I miss those days and that awesome team
Glad yall are back in the water. I wouldnt have used Coppercoat. It seems too complicated to install. I have been following sailing Britican as well. What a nightmare. You above all people should have the correct technique to apply it though. If you cant do it, nobody can do it. Most of us out here in youtube land are just Hacks. However, I dont even trust a boat yard to do a good job either. I sure hope yours works as expected.
Pate, I know of a boat owner who recently had traditional antifouling applied to his boat in Malaysia. After one week, the paint was peeling off in sheets. I would not trust boat yards to do anything unless I was standing there watching every moment.
pate allan 2.5 months later I have to say it’s overwhelmingly better than the boats next to us, some that were launched weeks after us. So maybe not as picky as we were afraid of. But the true test will be in a few years or a decade. Though usually our bottom paint is almost failed by now. So this is a good sign we may have a Coppercoat success! -Rebecca
Patrick,that was intense! I’m about to do a bottom job as well. So glad I got to see this and that you took the hard effort to film and cover the project, literally. Cheers! 🍹
Glad it was helpful. It was a lot of work to film it so always happy to hear it may be of help to someone today ;) The far bigger project was digging out, patching and faring all the resin blisters. Incredible amounts of local labor, and mine, went into that part of our haul out. I am editing that video now, which should be ready in a couple of weeks.
From my experience, coppercoat is a very effective antifoul bottom paint. And I would say you’re good to go for many years, it don’t look like it’ll fail. What appears to be most important is you have to prep your bottom really well, which you did. So yes, coppercoat is expensive, but if you consider this cost for at least 10 years it’s not more expensive than paints that you need to change every year. For the last 5 years all I had to do on my boat was to wipe the hull with a green pad once a year, and never had vegetation or anything else (my boat is in France so in not so warm water yet). The only problem I had with it was with galvanic corrosion, my center board showed real corrosion after 4 years, so you need anodes everywhere possible. I’m so happy with this product that I think I’ll do the same to my new boat next year. I hope you’ll be as lucky as I was with this product :)
Great to hear of your success with Coppercoat. You are right about the importance of a nice smooth boat bottom in preparation for Coppercoat. And that we certainly had! We are happy to hear that in your opinion the snags we ran in to won’t bother the success of our Coppercoat. It’s speaks volumes that you will apply Coppercoat to your next boat too. And it doesn’t tha energy to be more expensive than any other bottom paint...well, 50% more I would say. But the years and decades you get from it..to think traditional antifouling paint is cheaper is being penny wise and pound foolish! -Rebecca
Thank you for that nice compliment...we think she is looking pretty nice too with her new paint on the topsides and new Coppercoat on the bottom :) We hope it will work. Patrick took a look yesterday underwater (4 inch visibility) but of course it’s only been 6 or 7 weeks..everything should do well in that short time. This is a very bad area for marine growth...in other words...very nutrient rich and stuff grows fast. There was one area that was nearly impossible to get the Coppercoat on to, and it had barnacles...so I guess that stands as an example of what it could have been. But the rest of the hull just easily wipeable slime, so it’s not a complete, immediate Coppercoat failure at least. In a year we will see if it is a success...2 years...4 years...will post reports on our blog at the very least. -Rebecca
Patrick Childress Sailing Thank you Rebecca for making contact. I am considering copper coat on the strength of your report and have lodged an inquiry - I am in Australia and our conditions would be not dissimilar to yours (still?) in Sth Africa.
It’s amazing how many emails about Coppercoat we have received, and comments we have gotten. It seems like the failures on any product, marine or otherwise, really make the news.... and it seems like everyone has seen Briticans Coppercoat video...But for every failure of Coppercoat, there are so many happy satisfied owners that don’t even watch or comment on antifouling videos and forums anymore because Coppercoat has taken antifouling right off their topics of interest. When it works, which seems to be 95% or more of the time, it’s all good. But I suppose if it didn’t work, especially if you paid a professional to apply it, it would be hugely irritating and you would want to tell the world of your bad review of Coppercoat! Some products are more forgiving than others, traditional antifouling...it doesn’t often matter...apply it right or wrong, it still doesn’t work for more than a year. But Coppercoat applied right seems to really do the trick for a decade or more! Nothing ventured, nothing gained. -Rebecca
Thanks, Soggy. We have been sitting in this very nutrient rich estuary water for 6 weeks now. Part of the prep for departing in a few days for Cape Town was to go into this muck water, with 4 inches of visibility and give the hull a wipe with a large, flat, soft sponge. I worked more by feel. What little I could see and what I could feel, everything is appearing to be working as it should. There were 3 little barnacles on the hull, at the tight junction where the drive shaft enters the hull. Actually I was happy to see and feel those barnacles as it shows what could have happened if the Coppercoat was a fail on the rest of the hull. The wipe with the sponge took a fraction of the time it would have taken to clean traditional antifouling free of sediments and whatever.
Thank you. It has been a long, intense, grind, but I will now feel much more confident while crossing oceans in this boat. We have a bunch of video material from this haul out. Thanks for your comment.
Glad to see you back in the water. Even though the haul out was very informative. Good luck with the Coppercoat. From what I have seen- when it works, it is terrific!
That’s the feedback we have seen too. When Coppercoat works which seems to be 95% of the time, it is terrific...we hope we are in that 95%. It was hard getting the right supplies here to follow the directions...it would be best to apply it in a first world country or order everything from overseas if not in a first world country...but hopefully our Coppercoat application is a success and the idea of antifouling will slowly slip from our vocabulary until someone ask us. And then we can be one of many that sing it’s praises. Oh I hope so! We did have some complications that could mess it up, that’s for sure! -Rebecca
Thank you Smeggy. It has been a ton of work but it would not have gotten to that point without the help of most of the people you see in this video. I really like working with these guys; they keep a synergy going.
Very informative video (as always)! I watched the Britican videos also - hopefully yours will work out. In any case, by the time I get out there enough people will have had experience with the product that I can build upon.
Thanks for trying...wonder what it is...let us know if it doesn’t work on your next try. You can always just use my email address and PayPal...I think you have it from prior correspondence. Thanks as always for your support..you have supported us from the beginning*, and we greatly appreciate that! -Rebecca
I'm crewing on Britican right now. The boat is in the water for a month and a half and there is hardly any growth on the hull. I think this time the CC is going to work, I hope it works for you as well.
Dutch Globetrotter , hi , I am thinking of buying a wonderful wooden topsail schooner about 60/70 feet . Say hi to all on Britican and ask how is the kangaroo going.
Thanks...we would love to hear how Briticans Coppercoat is going before you leave. It seems like with Coppercoat UK right there doing the whole job it has to work! I really think it was just the first application of Coppercoat that was done wrong. Everything after that worked, including the patches that Coppercoat US came out and supervised. It’s a shame that first application went so wrong because it really brought some negative attention to Coppercoat. 122k people watched the first video, and then so few watched the videos after to see the follow up information. And probably nobody will watch the success of it. So many people like to see the failures of a product. But are videos often made of the successes of a boring product that remains underwater on the hull of a boat all its life, like Coppercoat? I’d like to think we will make follow up videos on the review of Coppercoat..but in reality, it may drop off our radar...I hope it does ;) But Patrick is quite interested to see if his diversions from the directions will cause the Coppercoat to fail or succeed, and why. He really wants to get to the bottom of the Coppercoat failures so there doesn’t have to be anymore. Aquarius Marine Coatings who makes Coppercoat May just be so tunnel visioned that they may not be understanding the failures properly, and with Patrick’s experimenting, they may get new insight.I think that’s why Patrick is so focused on this. He would like to be the one to find out WHY Coppercoat fails sometimes. He loves that kind of discovery. -Rebecca
Thanks for that. I’m not sure I will ever get that down, even after I sail both of those capes! I just HOPE, that I can blow a HORN after I sail around both of these capes with a clean boat bottom!! -Rebecca
All our old local waterman use copper coat on their boats. My Dad had a 42' deadrise pilot boat/dive boat and it held up very well for 5 years. At haulout we light sanded it clean and allied another coat. It's the layer buildup that helps. The more actual copper content the better, it also helps eliminate electralisis.
Thank you so much brick house I have been struggling with my copper coat and now I feel much more confident in my plan of attack can't thank you enough for your videos
So glad to hear we could help. It’s funny....Coppercoat is not just a typical epoxy, and it’s nothing close to an antifouling paint in regards to its application. There is a lot to understand and think about in the application of it. But once it’s understood, and the proper methods are employed, and the application of the Coppercoat is done correctly, the success rate becomes high...guaranteed almost...it’s all in the application, and doing it properly. Not always easy. But certainly worth it once you’ve got it doing its thing. Personally I think counting on a “professional” to do it is the worst recipe for disaster. Learn the process thoroughly yourself, and do it yourself. Hire some guys to help you. But you must be in charge, know what you are doing...and then it can be done properly. Nobody cares more than you!!! -Rebecca
@@RVLifeNOW Well It is an absolute honor to speak with you guys And thank you so much for taking the time I can't say enough good things about your channel I used acetone and the wrong rollers probly let it set in my roller pan for too long
Haha...well hello! Are you coming down to Richards Bay at all with Mike! He is discussing bottom paint/antifouling of your boat, right at this very moment ;) Thanks again for having up there...that was such a huge help to us! -Rebecca
Thanks Sonny! Patrick wants to go down and take a look at the Coppercoat ...like he can see something in this murky water...but at least we might see if it’s a total disaster or is at least working as well as other antifouling would be at this stage. -Rebecca
@@RVLifeNOW OK Please have patrick do a follow-up video on the coppercoat. I am in the midst of a repower and just completed the bottom job all work being done by me. It is so satisfying seeing the completed job.
Ok will do a Coppercoat Video Review and happy new year to you too! ...and will let you know personally right here how his look goes in a few days too...if anyone else wants to know...please comment below.-Rebecca
I used Coppercoat on my 45CC. It took me 3 weeks doing all the work myself. Launched in May of 2019 in the Chesapeake Bay and the boat never moved until November of 2019. I hauled her out at Hilton Head to put a new dripless shaft seal in mid December. . The bottom was perfect, nothing at all. It's now March and it is still perfect. I was really afraid it would fail but I followed the instructions, every last detail and it worked.
Good report..thanks for the comment. Yes, it’s pretty well known now that if you follow the Coppercoat instructions precisely, that Coppercoat will work very well, and last for 10 or 15 years. I sure do hope it does for us. After almost 3 months now, we are having the same results. But we do give it a wipe with a sponge every 6 weeks or so as we are in a very heavy growth area, and we don’t want to find out that we should have been wiping but because we didn’t, something took hold. You should see the boats here...they have the most beautiful reef systems attached to them! Coppercoat could do well here in S Africa, but its difficult to obtain, so I think that’s why it’s not that much in use here. Though in Richards Bay quite a few boats had it, and had had it for more than a decade with great results. No bad reviews there at all.only good ones on Coppercoat... haven’t met anyone here on the Cape Town side yet that has had Coppercoat. -Rebecca
Thanks Paul for your comment. Hopefully they can help other people get their Coppercoat Application just right so they can be one of the Coppercoat success stories ;) -Rebecca
It will be fantastic to see your voyage either through Tristan D'Acugnna and the Malvinas or the northern rout to Tierra del Fuego and rounding the Horne
I am not so sure about the Horn, as the Beagle Channel is much easier. But there is a charter boat out of Ushuaia, that makes a run around the Horn and back....maybe we will do it that way. Best to beat up someone else's boat.
the best things when copper coating it make sure you properly keyed (primed) you hull. the main reason the recommend foam and not hair roller, is once a certain amount of copper has impregnated the foam it will help evenly spread for better results. But hair rollers will constantly pull copper off the hull and move it around in clumps. the hair also has a tendency of just not rolling so you get an uneven spread if you use the roller for too long. as well as bits of hair getting stuck onto the hull which will give growth something to grip. coppercoat is love or hate. Love: if applied properly youll only need to take the boat out of the water for a pressure was once and a while. as well as not having to apply antifouling for the next 10+ years. good for long term in the water vessels. Hate: copper coating is rather expensive to both apply and remove if not applied properly and must be removed to try again its almost the price of antifouling for the next 10+ years.
We did all the Coppercoat prep and application ourselves, with helpers. That was far less the cost than paying a contractor to do the work. Apparently, with one ailed Coppercoat application which the Coppercoat company went out to resolve, they just sanded the existing Coppercoat to give tooth for the new application, then primed the surface with the epoxy resin with no copper mixed in. While that priming coat was tacky, they started the new Coppercoat application. Thanks for your good information and comment.
I have had issues with plumbing copper fittings & electrical wire, both manufactured in China, prematurely failing because they were not the copper content they were suppose to be. This issue could carry to the copper powder as well. Great work and thank you for sharing your ideas and expertise.
Yes, that could very well be. I would only think Coppercoat gets "certs" on the copper they buy to make sure it is of the quality they expect....especially if the stuff comes from China.
Are you considering Coppercoat? It seems if you get the application right, which is not that difficult to do, ecspecially if you are in a first world country, the success rate is pretty high. Of course you hear more frequently about failed applications than successes..The successes often get forgotten about because bottom painting becomes a non-issue with successful Coppercoat applications...but failed one...well that isn’t easily forgotten about. So no news is good news. yes...please let us know what you eventually use for your antifouling! -Rebecca
I imagine you do. I hope you find some antifouling that works for you...Coppercoat or other. It’s a pain to haul out and find any worthwhile paint at all once you get out there, so make it count, whatever you choose! -Rebecca
Hey guys. Totally wonderful to see even a little bit of Richards Bay SA. I am a SA expat currently living in the far north of Sweden. Please go to Cape Town... I am sure it will be worth it. It’s where my heart belongs.
OK...you got it...we will go there in February, for sure. We have been told to try to film our Coppercoat success here where the water is warm, since it will be very cold to get in the water in Capetown! So we may do a very short Coppercoat review a few videos from now to show what it looks like after about 7 weeks in very rich water...to see if the Coppercoat is working at least short term. Of course that’s not long enough yet to see if the Coppercoat is working...but at least we will see if it’s not working at all. And we are at a good point to give it a wipe and try to see how it is. Water so murky here, it may be more of a feel job that anything else. -Rebecca
Patrick Childress Sailing absolutely. Remember that the water will clear up a bit once off the coast. Are you guys going to pop into Durban or are you going to give that a skip? I lived there a few times too. Further down you have Port Alfred which is just beautiful... interesting entrance tho. South of PE ( Port Elisabeth) you have the absolutely stunning Knysna and timing is key when entering thru the Famous KNYSNA HEADS. Not to be missed tho. The Garden Route, by car, is so very pretty, but to sail up into the towns surely must be even more so. After Gaansbaai and Kleinmond you sail into False Bay which will test even the best sailing skills on a blustery day but Simons Town is a must, it’s where I got married, and nearby my first daughter was born. A beautiful part of the world.
The Grumpy Sailor OK...we are in Cape Town with the boat now...just drives today. Looks like our Coppercoat will get a good challenge here looking at the bottoms around us!! -Rebecca
Nice job and Good Luck with Copper Coat. I think the secret to success is doing it right and having reasonable expectations. I have met happy and not so happy owners to boats with copper coat. The big difference has been owners expectations. The ones that understand that diving and keeping the slime is part of the deal off are happy. The ones that think nothing has to be done in the next 10 years will be very disappointed.
On our prop and shaft, we applied Propspeed, as we have done in the past. It seems boat owners have the same unreasonable expectations about that product, thinking it is a magic product which eliminates all maintenance. Where we will be heading in the next couple years, the water is very cold so, hopefully, I won't have to get in the water so frequently, with the Coppercoat and Propspeed.
Patrick, Thanks so much with all your insight and honesty with the Copper Coat application . I have always been very curious of the longevity of such an application . Although I believe it is not allowed in the USA anymore.If it does work well and lasts , I know that when out of the country I wold like to try it . So thanks for all the tips on how to properly apply it . Robert North Star
Twisted, we had our Coppercoat shipped to us from the U.S.A.. You can contact Coppercoat U.S.A, at : info@coppercoatusa.com or go to their home page: www.coppercoatusa.com/index.php I hope this helps.
You may be thinking of TBT . Coppercoat is actually copper encased in epoxy and is considered extremely eco friendly because nothing really leaches in to the water. -Rebecca
Hi Patrick- Wondering, how does the hired help in these other countries take learning new processes than they are used to, how do they take criticism, and especially the guys you had to pull off the job?
It really seems no different than in the U.S. or elsewhere. People grow up with no hands on experiences, or tools in their hands, so everything is new to them. Many are intelligent and very capable of learning so it just takes a little time and instruction. They are very receptive to instruction,especially because there is a very high unemployment rate. I have helped along several local guys here who now have full time jobs working in this boat yard. They are the hard workers who, at times, I wondered how they could keep working so hard all day long. There are men who just did not work out, like anywhere. The two guys who were shifted away from the rollers have previously showed their skills on other projects. We just could not take the time to teach some roller skills. My boat was not the place to practice. It all turned out for the better as they were given jobs that were unforeseen, yet very important....like keeping the copper in suspension in the roller pan.
@@RVLifeNOW I love that you were supporting the local labour and encouraging them while they learned new skills. You 'taught a man to fish' as they say!
I’m a professional painter with decades of experience on a roller. Thinking I might try a system of application that, in my opinion, will probably be multiple times faster. It uses a 5 gallon bucket instead of a paint tray to work out of. I would fill the working 5 with only a gallon at a time, keeping the material mixed by the roller itself as I dip into it to apply the copper coat. I would have a separate 5 gallon bucket containing 3 gallons of copper (constantly stirred by a helper) ready to pour, refilling my work bucket as needed. Also, I would use a duel 9” roller system with 6 foot roller poles. I would have one 9” typical paint roller with a 3/4” nap roller skin to apply a lot of gushing (but of course, being a professional, not dripping) material, then another 9” roller and roller skin - this one 1/4” nap - to lay it off with once the copper coat has been applied to a wide area. With that, I would have my helper (or helpers, however many are needed) mixing, stirring, and refilling new copper into my work bucket, holding one of the two rollers for me until it needs to be switched out. I think one could cover far more real estate in in a much, much shorter time frame that way. Keep in mind, only a true, experienced professional painter with many years under his belt with a roller is capable of this. I’ve done similar things with other challenging paints. Who knows, might work. Thanks for the video, great job with it. But the reason I’m contacting you is to ask about the footblock (base?) that a keel-stepped mast sits on below the sole and above the keel. Got some questions. Do you have any writings on that? Maybe articles you know of? What is used as the block? Does it need to be faired to the bilge sides, bolted to the floor under the sole? Does it need to be just set in place without any structural fastening for movement of the mast? That sort of thing. By the way, I have a Miller Marine, Ted Brewer designed 1983 (‘84?) Jason 35, S/V Jenna Simone. Thanks guys, learning a lot from you.
Interesting approach you have to applying the Coppercoat. The Coppercoat is unlike anything you, or I, have worked with before. There is so much copper that it settles out almost immediately and needs constant stirring. I think a Titan 440 airless paint sprayer with a 0.015 tip would be a quick way but as you say with the rolling, everyone on the spraying team would have to have good previous experience. One person mixes and refills, one person moves the hose, one person sprays and one person is there to take care of the loose ends and be a backup. Spraying could be great or a real disaster. For the mast step, the best material is Garolite 10 also called G10. It is an incredibly hard epoxy laminate and will dull a carbide tipped table saw blade real quick. It is expensive but is one of those boat things that once it is installed, it will be there forever so in reality, it is the only thing that should be used. Any mast step must be bolted down to its base. On top of that is bolted a fitting that slips nicely into the bottom of the mast to keep the mast from from sliding around. The Garolite 10 should be at least 1" thick. Forget using wood or aluminum. Take out your mast and you will be able to copy what is there. If you are near a rigger, they should be able to tell you where to get the G10 or it can be ordered from places like McMaster Carr, or maybe even Grainger. The rigger or a mast maker might have a water jet machine to cut the G10 to the size you need so you don't have to tear up a good blade. I hope this helps
Thanks so much for the quick response. I have two comments and two questions, if you would, sir. Comments: Spraying copper coat - I thought about that but would not do it. Wouldn’t want to take the chance on those copper micro-particles fouling up and lodging in the nooks and crannys of my rig. And it’s not needed. A good, highly skilled and experienced roller man can apply just as fast (or faster) as a sprayer can. And you don’t have to clean the rig! Mast base- I have no mast base as my boat was never finished out by the boat builder. Mine is a semi-custom, a ‘not-quite-but-almost-one-off’ build, as it were. She was basically a hull, deck, and cabin, with portlights, bulkheads, hatches, and a sole below when I got her. There isn’t even a breach of any kind anywhere on the cabin top for a mast, either deck or keel stepped. No bolt holes, no cut-out, not even a marking as to where the mast would go. Just an expanse of clean, solid cabin top, like a powerboat. Again, it was bought by the original owner before it was finished so that he could finish it out himself so I have no existing mast base by which to refer or compare. Questions: The G 10- Are you saying to pour a resin block of G-10 into a mold for a mast base? Or do you mean to use it for a laminate of gluing layers of wood together to build up a wood block? If the latter, how high (thick) should it be for a 16,800lb displacement vessel? Immobilizing mast base- Is a keel-stepped mast base supposed to be bolted down or otherwise fastened in place on the keel? or should it simply rest there, allowing free movement with no bolting, gluing, or fastening of any kind? Again, thanks so much for the kind and timely response.
@@globyois Only a factory makes G10. You will have to buy a 1 inch thick piece of it to make your mast base. You will have to bolt it the the bottom of the bilge or wherever it will finally sit. On our boat, it sits on the bottom of the bilge and bolt holes extend past the G10 with threads tapped into the keel area. Any mast step must be permanently mounted in place It cannot be allowed to move in the slightest. Do not use any wood in the bilge area for anything. Buy the block of G10 from the sources I previously mentioned. I hope this helps.
I may be showing my ignorance here... but does the resin only work its way to the exterior of the hull? Or is there blistering on the interior as well?
I had wooden sailboat 5 years in a row, and did copper coating every preseason. I have never seen or did, such extraordinary complex tedius job as you did here. Coppercoat is all about layers, quantity of material And doing it fast. Absolutly no sanding afterwards. Flop it on asap, deep layers. Almost wet on wet. Can go semi-dried back into sea. Thats how its done in adriatic. Never did coppercoat in more than two days. 3 layers coat.
I always used monocomponent copper coating, unlike your 3 component. Why I do it every season? Its wood. If I do it every season, its out only for 3 days, and I dont need to sand anything off. Just a fast detail, hand sanding, and on with copper. On fiberglass boats, its done every second season. I rather pay for lifting, then do any kind of sanding. And every season, I have the sleakest bottom possible. And an easy job about it.
I hope it works for your needs. Its not the same material, i agree. But works on the same idea. Shouldnt be that different in use. I wish you calm seas, and long lasting copper coat ;)
@@RVLifeNOW I have no idea... I am just in the process of getting informed about Copper Coat... I've heard horror stories, but I don't listen to them without reservations... I'm interested in seeing an update from you, on how well it's working... :-) That, I'm sure, will take time... See you then :-)
@@RVLifeNOW Well... This won't take long - Did it... lol I have learned that all of the Coppercoat Horror stories, were from poorly applied coppercoat... Done right, it should last 15 - 25 years... Awesome! I expect that your next video on the subject will reveal how well you applied the stuff... and the results you experience... Looking forward to your next assessment of the job... :-)
We will be checking the Coppercoat frequently because we know people will be curious...as will we. Patrick is already itching, just 6-7 weeks in, to dive down in to this murky water that you can’t see further than 3 inches in, to explore the bottom of the boat, to see how the Coppercoat is doing. But it’s too soon to really know. But every antifouling is good after a month or two, right? The question is after a year or two! But if it’s a disaster now, I suppose there is little hope for its future, so better to find out now I guess. Knowing Patrick as I do, the Coppercoat will succeed just becuase he knows this stuff..he knows what he is looking at, and knows when the instructions shouldn’t be followed, knows how to work around complications because he did sort of this kind of thing for a living in another lifetime. But I am a “by the book” kind of gal, so I am a little doubtful regardless. Everything says follow the directions exactly on the Coppercoat website and Coppercoat instructions...and we could not...did not...so I’m a bit nervous. Not that it’s any big skin off our back if it only works for a year or two. NO bottom paint lasts longer than that anyways. If we get more out of it than that, it will ALL be frosting! But we hear so many success stories when we really start digging and asking around boatyards, a girl can’t be blamed for hoping, even if things gave us a bit of a struggle. Could we do less than Coppercoat applicators that don’t care half as much as we do? -Rebecca
@@RVLifeNOW Skepticism is warranted... I too do not believe everything I read and having followed Patrick for some time, I am confident, he's more than capable... Looking forward to your next report :-) Btw, I have already recommended this procedure to other sailors... based on this video... :-)
Hope it’s helpful. We did do a Coppercoat antifouling update on our website about what it was like after 7 weeks of sitting in this mucky harbor...and it’s doing well. Not that 7 weeks is the sign of success...but at least it isn’t failing already. So our confidence level has risen greatly in that this Coppercoat will work for us! I think the most important point to remember about Coppercoat is to make sure you thoroughly understand every bit of the instructions. Download the detailed Coppercoat application instructions from your reseller... Coppercoat USA in our case as well as Coppercoat UK’s instructions. Understand them 100%. Ask questions if you see a conflict of information or something that isn’t crystal clear for you. Consider a diy application of Coppercoat...or if you will hire the pros, assume that they may be forgetting some steps and get a firm understanding of the procedures with them. Don’t assume the doctor knows it all! Good luck with your decision on which antifouling paint to go with! Send us an update...-Rebecca
Love your cat head. Funny thing is the cat head helps with the anchor on tall ships. By the way, I went sailing with Simon and Kim And Sienna( and how is your kangaroo going on Britican) on SailingBritican and had a wonderful time. They really know what they are doing and talking about. I would recommend them to anyone who wants to try sailing and see what’s it’s all about. I had a very wonderful time with then.
Yes out little Coati likes to be the center of everything...even in a video about Coppercoat ;) Glad you enjoyed your time with Britican. They seem like a nice family, and I think this time with the proper application, their Coppercoat should be a success. The problem wasn’t with the product...it was with the Coppercoat application. What exactly is still a mystery...wouldn’t want to be the owner of that original boatyard...but it was the application...not the Coppercoat product itself....I’m glad that they have it sorted out. If they don’t this time...then there is something happening with the boat itself. Coppercoat works on too too many boats for it to be the product this many times in a row. And if this application of it doesn’t work this time...then there is some mystery third situation happening! I hope and pray it works for them now! -Rebecca
My father had coppercoat applied by pro's ,although not cheap he said it was the best money on maintenance he ever spent .He sold the boat after 8yrs of use with this product ,he said there was very little difference in its condition at the day of sale apart from where he had had remedial work after minor marks and damage .
Hi guys, she looks lush! What an amazing job you did! Especially with sanding out the blisters and filling them up and such, rebuilding your boat basially. We have some osmosis too and will go through the same process. Can I ask what product did you use before you applied the coppercoat and how many layers? Cheers!
If you watch the 500 blisters video,it shows the products. AMT Composites in South Africa was great to work with and shared much advice with us as we went.
The Coppercoat product we used cost around $1,800 out of the U.S.. We were very fortunate for shipping. We had new anchor chain shipped from the U.S.. Maggie Chain said there was still room in the barrel, if we wanted to add more boat parts to fill the void. If it were not for that cheap shipping, we probably would not have gone with the Coppercoat. People do ship Coppercoat to S. Africa for application on their boats, but there is no local distributor who stocks it.
Thanks, nobody. It has been a long haul out of the water but all for the better so we can safely cross more oceans. It took us a while to finally discover Coppercoat. For some reason I always thought it was a $20,000 application that could only be applied by certified professionals. Turns out diy is totally allowed, and often preferably to professionals who don’t read the copper coat instructions! -Rebecca
Did you take moisture readings of the Hull before applying epoxy ,going by the photos and the drills holes with water coming from them the hull . It is saturated with water, what will happen next more blistering will appear all over the hull and the epoxy and copper coat will fall off.
Is this really Lex?Twice, since 1976, this boat has been treated for resin blisters. Each time the blisters returned yet nothing fell off....unfortunately. It would have been nice if the layers of bottom paint would have fallen off instead of taking weeks to remove it by hand. Yes, I took a lot of moisture readings and over 5 months watched the numbers drop. Read up on moisture meters and it seems they are not that much use, really, as they can produce a lot of false numbers. But in my case, the meter was useful to show a change....and a pleasant one at that. From your description, it sounds like this has happened to you. Please tell us more about your experience.
The Coppercoat itself cost $1750 usd for the 11 kits for our 40 foot boat. Materials for the application of the Coppercoat costed under $200. Labor was additional.
Patrick Childress Sailing I was just on Britican blog and there total cost was 11700$, there was surely something else done at the same time. Thanks for sharing
This shows how it can be very worth while to get your hands dirty and do the work yourself with helpers. Delos showed, on one haul out, how much money they saved by doing their own haul out work rather than throwing money at contractors, who often times one pays to screw a boat up rather than do the expected good job.
Their cost included professional preparation and application..ie the labor. If you go to www.coppercoatusa.com the prices are on there, and an estimator for how much Coppercoat your boat would need. Ours needed 11 kits to cover correctly. Briticans boat...not sure what size it was...but I know for sure they didn’t do it themselves. We did it ourselves and hired some $15 per day guys to help us under Patrick’s supervision and direction. -Rebecca
@@RVLifeNOW Delos spend nearly 50k on a new bottom coating whose SLICK attributes insured no sea growth would ever be able able to stick to their bottom. Live and learn.
excellent video Mr Patrick!! thanks....launching my cat Reload 'n Charge! tomorrow early, no copper coat.....but back in the 'oggen! Continue to enjoy your videos! Thanks, Andrew
Hi Patrick and Rebecca, I think that you were lucky to have had the extra days for the coppercoat to cure. Whenever someone complains about how difficult it is to sand an epoxy coat that they applied, I ask if they have given the epoxy sufficient time to Cure. Whether they use fast hardener or slow hardener, it still takes most epoxies 3 days to cure enough to sand effectively. Before that, the paper will just clog immediately. And it is Very common for inexperienced people to UNDERMIX epoxies, or to not allow sufficient time for reactive sites to be found, both of which lead to an UNsandable coat. So a Maximum mix time of two minutes just doesn't sound logical to me, and "the copper won't settle out" sounds equally improbable. Not to mention the people who are volumetrically challenged, and think Any Ratio is a Good Ratio...being casual about ratios will pretty much ensure failure. I would be reluctant to recommend anything other than what the manufacturer recommends, and I really have little experience with water-based epoxies. However, I would also feel like a complete idiot if my first pass sanding new epoxy was with 320. I guess they don't want you to remove everything you just put on, like the trailing edges, but it sounds counter intuitive to me. From a Marine Professional (who quit the painting part decades ago), I wish to comment on your statement about how hiring a Professional was the wrong way to go. I do not agree that it's the wrong thing to do, but I wouldn't want any professional working on anything if they don't care about your boat. And a lot of them Don't. Working with your crew in SA seems like the best way I can imagine. You gathered as much info as possible before starting, but once you're actually doing it you have to be ready to adapt to whatever comes up. I like your idea about using a different color for the final substrate epoxy; I actually like to use a different color for each Batch sometimes as well. Then you can tell exactly which epoxy was applied when. In Brick House's case, that would be modified to mean different layers, not batches, but it makes for some very strange looking projects, what with all those colors. The upside of course is people think I'm crazy and don't bother me asking for advice; rather they keep their distance. You get so much more Done. Let's face it, I'm a Dinosaur: I believe in VOC's. I believe in shit like NAPTHA, PAINT THINNER (oops am I yelling?) that Doesn't have acetone in place of the turps, I love 333, Magic Magoosalum and all that illegal stuff. If I were to lay a teak deck, I'd probably lay it on TARPAPER, God forbid. Like for painting wood, I believe in OIL Based paint. Wood contains oil and once it has drawn its oil from the paint it is time to put some more oily paint on the wood. Plastic paints, on the other hand, simply encapsulate the wood in a membrane which is only good for growing mold and mildew between the coating and the substrate. All that rotten, moldy, wasted wood that is the result means it may have just been greener to use the oil base finish instead. Then you would still have the original wood, think of the trees you've saved. But that's another subject, isn't it? Did I mention Alcohol-free gasoline? That too. It doesn't ruin everything. Replacing whole engines just because the ruined one was running on PC fuel doesn't sound that Green to me. End of rant, Rebecca. Take Care. LOL
Marty, I fully agree with you on all counts. The world is not changing for the better. On hiring a professional, I don't recall saying that, but certainly some professionals can make a real mess of things. I have witnessed that, repeatedly, in many boat yards. A boat owner needs to have a good grasp of the project at hand in order to know if the contractor is on the right track or not. I always like reading your comments. Patrick
@@RVLifeNOW Thank You Patrick.I'm far from the last word regarding any boat repairs, and I learn a lot watching your videos. Any job will have more than one "right" way. I like working with people who want to keep learning, and not discriminate against someone who may have less experience. Enthusiasm is more important.
Geez, man, feel better now that you've gotten all that off your chest ?? Take a deeeep breath, man ! I do agree with you on some points but not on all. EX: Water based rust paint was tried some years ago only for a big failure. Garbage. For painting a house, non-COV paints are a great innovation. As well as alcool in regular fuel in cars, bringing a lot less emissions from cars and trucks. See, new products are not all bad. PS Yes, I used tar paper too as an underlayment in my basement floor ! Not the over-expensive recommended stuff.
@@marcryvon Thank you Marc. Don't give up on me, I used Latex/acrylic paint on my house because I really liked it (it wasn't cheap). But on the wood I used what we call KILZ (primer), which is available in an oil-base version. I didn't use the water base. It's the "oil base" Alkyd enamels that I am missing the most. I think that if a boat has wood that's worth preserving, modern water base paints are counterproductive. For autos designed to run on alcohol containing fuels, fine. It's all the marine engines and their supporting systems destroyed by this fuel that I consider a pitiful waste. Yes, I felt better immediately after writing that rant. Are you on the Continent? In the US ( the EUA) or maybe just in California, we now have "paint thinner" that has acetone instead of mineral spirits. It's a joke.
Thanks, atschris. It has been a very long haul out and very long working days. But the boat is far better than when it rolled out of the factory and ready to cross more oceans...even way down south to Tierra Del Fuego. We should be leaving Richards Bay for Cape Town in 2 days.
None at all. Another commenter recently asked Coppercoat that question as it might be a good grounding plane for various reasons....but, being encased in epoxy, there is no conductivity.
Thank you so much for this. Coppercoat was my #1 choice for the next bottom job before heading out to the South Pacific. However, I read so many failure stories (including Sailing Britican's) that I became concerned about the apparently finicky application process, even when performed by "professionals." I'm continuing with the usual paint for now, but depending on your long-term experience with it, may reconsider Coppercoat in the future.
If you are in the USA or other first world country, it never going to be easier to obtain the Coppercoat itself and the other required tools. But if you have to do a lot to your bottom to get it ready for the Coppercoat, maybe wait til you are somewhere with cheaper labor unless you have some teenagers or friends to help. Part of our issues were doing it in a less than ideal place where it was hard to find the right tools for the Coppercoat application. Yes it’s finicky....but how finicky...we shall find out. Coppercoat when we spoke to them feels we worried about things too much...but yet you do see those negative experiences too (though those always make the news way more than successes) We made our share of deviations, and after 7 weeks it’s working...so our mistakes I guess were not fatal...but of course the big question is will it be working in a year or three, or in a decade... If you are heading off for a circumnavigation, do what you need to do to the boat now...it becomes cheaper laborwise, but more difficult to do your bottom out in the Pacific in regards to haul outs, and finding any decent antifouling paint at all.. We did ours, with less than optimal paint but the best available in each location, and nothing ever seemed to work, in New Zealand, Fiji, Philippines, Borneo Malaysia, and then Mainland Malaysia. That’s 5 bottom jobs in 10 years...and every time was well past due. Universally, we had to choose the best of bad antifouling paints. I wish I knew then that Coppercoat was even an option for a lower budget boat like ours...I always thought it was just for the wealthy. -Rebecca
@@RVLifeNOW Thank you for sharing your hard-earned experience and wisdom!! I'll also be keeping an eye out for Selektope-based paints, which look like they could revolutionary, but are not yet regulatory-approved for sales in the U.S. I hope the Coppercoat works out for you for many years to come!
Silicone based antifouling paints were a strong consideration for us before we found out they can only be out of the water for 14 days....or you must completely strip and reapply. Nothing happens in 14 days in a boatyard in SO many places in the world...many haul out facilities are tide dependent monthly...not to mention making things happen that fast once hauled out. So we decided against Silicone because we aren’t looking for antifouling paint that has to be taken off every few years when we haul for other things. We were looking for longevity so we don’t have to haul out just for bottom paint so often, and so our monthly scrubs are quicker and easier. -Rebecca
hi guys the problems you had with the epoxy and cleaning it can be avoided by using MAS epoxies they are great no blush no was no need to clean we apply copper coat and we do add the alcohol we also mix in some virgin copper into that sent by copper coat as there is reclaimed gives us a lighter finish but good luck on your next trip
thank you for that. back in the mid 80's copper coat was the most common when i worked at marina shipyard, as i remember it. (not to say my memory was the best) but i don't remember having had to mix it.
i was in the hardware store most of the time helping folks figure out what they needed, ordering parts, and of course mixing paint with the paint mixer! I think that's the key. i wasn't outside mixing it! either way. good video, as usual. lots of " how to" cruiser video's. but a rare few like ya'lls that is truly helpful and more importantly, honest reliable information. way too many rookies passing along bad how to information. so once again, thank you to ya'll.!!
It's a huge job you undertook; really daunting. But each time I look at the videos I cannot get over the impression that the boat is barely propped up with those poles and is in imminent danger of falling over. Eight months of equipment vibrations and moving poles to paint and work under. At a yacht club in Canada (at least the one I am in in Montreal) we would never be allowed to work under without a steel/wood cradle or belly bands and the big travel lift. Is the mast secured with guy cables out of camera view?
Isn't that amazing how they prop up boats in foreign countries?!! You should see the much larger boats propped up in the same way with the gum tree poles. I can't say I was impressed when I first saw this but this is how they have been supporting boats on the hard, forever. They can't afford nice steel, adjustable, poppets, like in the U.S. or Canada. After they set our boat, I had them come back and add two more poles at the front of the boat, to make me feel better. The poles are solidly dug into the ground. Because of this, and the sandy soil, I could move the poles, and even the blocks under the keel, by myself. Anywhere else, it would have cost a small fortune to have a travel lift the boat so I could move the keel blocks and do the work needed. Check out all the bare feet and flip flops on the workers. Never did I see one of these people hop because they stepped on a pine cone or something sharp. Get away from the U.S. and Canada, and the cultures can be pretty hardy. I really did like working with these guys.
@@RVLifeNOW How ever did you sleep at night? A strong wind, or a good downpour to soften the sand... With every weather event, I'd be sitting in bed, arms wrapped around my knees and eyes the size of saucers gleaming in the dark... :^)
Love the Zulu jackstands ... Wow, Coppercoat looks complicated, though everyone I've spoken to who has it on the bottom of their boat likes it. Keep us posted. The boat looks great! Have a safe trip around the Cape. Once you get west of Agulhas you'll think you're cruising the coast of Maine--chilly green water, fog, kelp, seals ...
The stands are gum tree poles. The tree grows very straight and very tall. They are allowed to grow to the desired diameter before clear cutting huge areas, like a farmer would corn or sugar cane stalks. They are very hard and rot resistant. Being sandy soil, it was easy to dig out and move the stands around, and even the logs under the keel, to get to untouched areas. No need to call the travel lift to move us. Hopefully, this coming week we will catch the proper weather to head for Cape Town. Looking forward to the west coast of Africa. I was in Cape Town in 1981 on my first solo circumnavigation. It will be interesting to see how it has changed. ...but everywhere in the world has changed, tremendously. I hope the chill has gone from Key West.
@@RVLifeNOW Interesting ... you could actually MOVE the boat without a travel lift, rolling her on logs? Um, yikes. Fair winds for your trip around. Key West is hot, cold, hot, cold ... and sometimes blowing a gale. Other than that, pretty nice.
@How to Sail Oceans It was not moving the boat fore and aft, on the keel supports, it was placing a new support under the keel, blocking it up as good as possible, then taking the hooked end of a crow bar and digging out the neighbor block. The boat would settle onto the new block. The soil is very sandy so the dig was easy. Once the keel is resting on the new block, the old support can be pulled out from under the keel and moved to the back of the keel, next to the support there. Then dig out the existing, weight bearing support, and the boat settles onto the new support. Pull out the old support and we have the previously untreated areas under the keel, now exposed and ready to work on, applying Coppercoat or the like. The travel of the boat downwards onto the new supports in only an inch or so but the jack stands/side pole supports have to be freed up and adjusted a little as to avoid too much pressure on the sides of the hull. Certainly a lot cheaper and easier than to have a travel lift mess with the boat. I was just thinking, it is going to be warmer in Cape Town, than Key West, this time of year.
Here anyways, they would not let you hang in the slings for more than a day, and with Coppercoat, you need to do the surface prep, then application, then 3 days later the sanding of the Coppercoat...so yes, best to be on stands, and then move them to be able to do the Coppercoat application properly. -Rebecca
Hi, thanks for the video. Why do you have a small hole at the top of your rudder? Also, I've had decent luck with ultrasound anti fouling on my Panda 40 in temperate climates. Doubt it could stay ahead of things the tropics, but just as a data point...
Is your boat, with ultrasound, in the water 12 month a year, or are you hauled out for the winter? The ultrasound companies we communicated with never came back with good enough answers to make us want to try it. Plus the high energy required to operate it 24 hours a day meant we would need to be plugged into shore power. Ultrasound did not appear practical for our modest, long range cruising sailboat. The hole in the top of the rudder is an idea I got from our neighboring steel sailboat. If there is some sort of rudder failure, a line can be attached to that hole and set up an emergency steering system. I did dig into our rudder to inspect the steel spline, welded to the shaft, as it was made in 1976 and rust was dripping out the bottom. It was in surprisingly good condition yet we had the exposed welds, rewelded. Everything was sealed up solid so hopefully there will be no more water intrusion into the rudder shaft. One day, that will be another video. Thanks for your comment.
I haul out every other year, but up in the NE of the US, nothing grows in the winter. I don't recall the current draw of the ultrasound, but I never plug into shore power. I just have 300W of solar on my bimini, which more than covers the fridge (no freezer), ultrasound, and anything else, as long as we don't get more than 3 cloudy days in a row. I get a few barnacles on the keel, but almost none on the bottom. Again, I'm based in the NE US where growth isn't that aggressive, so YMMV.
Hello, this is Rebecca. We were based in Newport, RI....so very familiar with the waters up there. Hauling every winter certainly makes a new coat of antifouling easy to do. Part of the spring tradition. But now I realize that doing that every year on the bottom of Brick House, despite always using self sloughing paint, the paint layer build up fast. The poison and a little bit of paint sloughs away but not the rest of it. An application of Coppercoat, even in New England waters seems like it would be a great solution, saving money in the long run..And once a year when you take her out of the water, you get the usual pressure wash, then maybe again in the spring before you launch...and you don’t have to sand and paint that toxic paint. A tradition happily lost ;) Just one proper application of Copper coat paint, and no annual bottom painting for 10 or more years. There are boats here going strong with Coppercoat after 15 years! -Rebecca
@@RVLifeNOW That's funny! No, I meant some 90% alcohols are rubbing alcohol, and may contain stuff like castor oil and other chemicals that might not be conducive to adhesion. Alcohol and acetone are quite hydrophilic, they can absorb moisture and quickly become dilute and ineffective. None of the materials used around glass fibre are very good for you. We always kept everything bone dry, requires heavy duty extraction vacuums with filter bags, still a miserable job, hand lay up repairs to blisters. A boat is a hole in the water you throw money into.
Hi Patrick. Love your vids. You are my hero. I am embarking in a sailing life, at 68 and you have relieved my doubts about age. As for Coppercoat check out the vlog from Sailing Britican dated 18 Dec 2019. Cheers
Good for you Gayland. I am just one year older than you and see no reason to slow down. In fact, the clock is ticking louder so we have to move even faster to get through some adventures while we can. I got permission from Britican to use some clips from their latest video, in this video. I gave them credit with a label in each clip plus a "thank you" at the end. Part of their experience was motivation for me to make this video. No one could say just where the Britican applicators went wrong. I think it would be valuable information if we could figure that out.
Thank you. Young Coati is a great boat kitten, very friendly. His feet are like snow shoes so he still has some growing to do....but we hope not too much more. There are some big cats here in Africa.
What's your opinion about ultrasound antifouling devices? Do you know how they compare to copper coat? Does it make sense to combine the two (or maybe ultrasound at least switched on when the boat is stationary in a harbour(?)) or would it be overkill?.
I don’t really know to be honest with you. We considered trying it a few years ago but had to be installed professionally...in Australia...and didn’t want to go to Australia. So at that point we just applied some more noneffective antifouling that didn’t even last 2 years and required lots of aggressive scrubbing of the hull. If this doesn’t work, that could be our next attempt. But energy is always a concern on a small boat with a small battery bank, so I’m not sure ...but like you said...maybe when in a marina switch it on. I’m not sure how it would enhance or detract with Coppercoat. Thanks for putting it on my radar again. I love researching and considering things like this!! But hoping this Coppercoat application does the trick once and for all! -Rebecca
We explored ultrasound and no company came back with adequate verification that their system works. Plus, it would take far too much electricity to keep the ultrasound functioning 24 hours a day. Charlie Doane, at SAIL magazine tried it on his own boat and from what I recall, it was not a huge success, but best to check with him. Charlie also has a blog site at wavetrain.net . You can contact him there and probably read his take on ultrasound.
Coppercoat Antifouling is a no go! Their marketing is very good, the product, not so good. Spoken to a few boat owners, some of them will say run! I hope it works out for you.
Thanks for the comment. Now after 4 months we see how it’s working. It is working unbelievable great! I personally am pretty surprised. But there is NO growth at the waterline to this day, and when Patrick dove a few weeks ago to wipe off the bottom of slime, he filmed our neighbors boat, as well as ours. Nothing short of a miracle! Slime but not growth that needed anything more than a wipe with a soft sponge. The other boat that had what was considered the top of the line traditional antifouling at the same yard, launched 2 weeks after us, had so much growth the owner wanted to cry....and it was NOT easy to get it off at all. He had a 5 inch beard at his waterline and barnacles and tough to remove growth...Patrick is making a video about the Coppercoat and the Propspeed results right now...make sure to subscribe to see it yourself in a week or two! We have met happy Coppercoat owners all over the world now...it’s definitely NOT just marketing! But there have been some pretty crappy applications of it, and it MUST be applied properly. There IS room for error on some things, but in general...it MUST be done properly!!!-Rebecca
Just wait! Look out for bubbles in the water line or just below the waterline. One of the biggest yacht service yard in the UK stopped recommending and working with them due to that. The product sounds good, it might work in some regions, but it will never be applied to my vessel.
@@MogleCorp I am very interested in this. What causes the bubbles? Are they big bubbles, little bubbles, many, a few. There is a lot you are not saying which would be very important information.
@@RVLifeNOW I would file this under "I know a guy". I think you are right, goof up the application and ya it will not work. Do it right and you're fine. Certainly keeping the copper in suspension is key, getting it flat and smooth and sanding completely are important. Unfortunately very fussy and time consuming requirements and for the slap it on ablative guys never going to happen. .
I love the concept. Been watching it for years on message boards. My opinion right now is there are just too many 'gotcha's' in the application process. There are just too many ways one can make it so the product doesn't work. It would be nice if Coppercoat or a competitor modified the formulation so that it was far easier to apply with a greater certainty of success.
hi guys the application looks good, i look forward to seeing how it turns out over time and what results you've achieved, by the looks they'll be good ones, :), its the system ill be using and will be applying it very close to the way you've don it, it is very similar to doing zinc coatings , continuous steering while applying , is the trick, keep things in suspension give an even coating, well done, and brick house is looking sharp . :)
About the stirring, I would not have known this if I was only watching someone apply the Coppercoat. It is good to get hands on experience with all boat projects.
Hello how are you? I wanted to know how the coopercoat you applied 2 years ago has gone. would you apply it again? After 2 years, what results have you obtained? Are you happy? Thank you very much and good winds
Hello Pablo. it’s been 2.5 years now, and while it doesn’t stop growth here in nutrient rich waters of the Caribbean, it’s easy enough to o clean still. Perfectly effortless to clean no..but easy enough. I would never paint over it. We clean it once every month or month and a half and it is good to go. I see cleaner bottoms around here, 3-6 months after someone has applied expensive bottom paint and I often wish I could have a perfectly clean, never need to be cleaned bottom…that doesn’t happen, but the divers are always done in an hour and they say it’s so nice and easy to clean compared to other boats. When I get in the water and clean it seems like a lot of work..but I’m a woos. This is Rebecca speaking by the way…the wife, in case you aren’t aware :) Anyways…I would,put it on again…but the beauty is,mi won’t have to for 10 or 15 years…it comes out way way cheaper in the end. But there is no perfect pain that just keeps all the growth away. It MUST be maintained. Coppercoat isn’t designed to ZTOP growth,mits designed to make it easy to wipe it off..and it’s definitely easier to wipe it off than other paint once things start to grow.
Thanks, we do too. We had Jotun brand but a different name..Jotun Seaforce, last time and it didn’t last 3 months. We sure do hope the Coppercoat will be better than that! When you find an antifouling you are happy with, you just have to stick with it, whether is be Coppercoat antifouling or anything else! -Rebecca
Hi Robert. Believe it or not, Coati is but 6 months old...we got him here...weight 8.5 pounds already. They must grow them big in Africa..the vet says he will be double that as a thin adult! He roams just the inside and docks of the boat both on land and on the boat, so far. I had him fixed at just under 6 months to make it an easy operation AND to cut down on roaming tendency. He didn’t even get to participate in the application of the antifouling! So far, we can be on the dock right next to the boat and he has no interest to get off, though I suppose with time the inevitable will happen. Every kitty mommas biggest fear...will he be a smart roamer. We had a cat before this one...seen in some of the videos...who was about 7 1/2 years old. She was diagnosed with cancer about 2 years ago...and was suppose to only make it another year, though she made it 2. We had to put her down about 3 months ago. We got Coati at 3 months old, pretty soon thereafter because we were so lonely. We haven’t sailed with him. Poor things first passage will be around Cape of Good Hope. The engine doesn’t bother him, and he did well when the boat was put in the water and was rocking and rolling. Hopefully the sails snapping and the boat heeling won’t bother him much more. Just like Lily my old cat, he looks up at me to know if everything is OK...so I will just have to have a face of steel for this passage. During passages with Lily, when it was calm, she knew it was OK to go on deck. During rough passages (she could just look at the water going by the boat and the motion of the boat), and she would know to just stay in the cockpit. When it was really really rough she didn’t even come up to the cockpit. She curled up in a tight space somewhere and went to sleep. There were times I’d have to steady her in her litter box so she could do her business. She barfed once in the first passage before we were even out of the channel, but then never again. I hope Coati can be the boat cat Lily once was! -Rebecca
Yes. We won’t worry about the Coppercoat...it will either work or not work. It can’t be worse than traditional antifouling. But Coati...we will worry about Coati for sure. Now we have her locked in at night since there is an Orange Boy who wants to tell our little boy that this is HIS territory...so he’s been coming on the boat at night to make his point clear. So not worrying about the success or failure of our Coppercoat right now! -Rebecca
I wonder why at 3:10 the epoxy coatings were left to dry, sanded by two methodes and cleaned, de-dusted and water-washed. Why didn't you start the application of coppercoat once the last coat of epoxy (at 3:10) had reached the end of its potlife and was still sticky, not completely dried ? Succesive layers of epoxy should always be applied in each other, not on top of each other. This can be done, of course, but then the sanding is necessary but should be avoided. I think it is the right moment to start the application process. After that, keep applying it until the desired number of coatings are reached (can be up to 10 coatings). Or else, divide the boat into let's say two or thee zones. De first zone is treated until 10 coatings have been reached, then go to the next zone etc... One zone a a time, keep working until finished. It is very important to start the process and finish it in one long haul, so no stopping in between. It is a good thing to keep one person occupied with mixing and distributing the coating. The finished product is very lightly sanded, pref by hand, as to expose as many copper particles as possible. You also mentioned that coppercoat is water bases, which is not true, of course. You should be good for the next 10 years, which is a good thought knowing that it would have costed you +/- 120 euro's per m² now.
Thanks for the insight. It would have been too hard to organize going right in to Coppercoat application at the end of epoxy..there were a lot of fine details to pay attention to at end of epoxy. Coppercoat is indeed water based…you clean up with soap and water…and of course if it rains hard…it’s all washed off the hull.
None worked very best. Though one we got an expired one from a job we had at a a military base in the Pacific...labelled “International 640” worked better...for 2 full years before it completely failed.. But then we bought the same exact kind the next time and it didn’t work for even 6 months. Maybe the military had laced it with something. We really hate bottom paint...it’s the worst thing about being out here having to haul out every year or two to replace bottom paint that we spent a thousand bucks on minimum to put on. We are praying that this $2000 outlay will last 10-15 years and make it so we just have to do the monthly scrubs and maybe a pressure wash every year or two. Even if we have to patch a few areas after a year because the Coppercoat application itself wasn’t perfect on some select spot..we are praying to not have this hassle every few years with antifouling paint. Fingers crossed! Rebecca
@@RVLifeNOW Thanks! excellent video and great advice. I never really knew the difference between denatured alcohol and rubbing alcohol.Will watch all of your videos.
Thanks for watching! A little update. 6 weeks and just slime except in the one place that it was too hard to apply the Coppercoat. That little 2 inch if that area has barnacles! The rest, just a thin layer of slime that comes off the Coppercoat just as easily as the slime on the Propspeed did! Yeah! -Rebecca
Exactly what Patrick surmised. Coppercoat should put that in the instructions....South Africa quite proud that they use “genuine mohair” on their rollers, and it’s what the boatyard recommended to use...who had applied Coppercoat in the past with it. But we were not excited about it, for the same reason you mention, so hence why we decided to use the smaller foam rollers to apply the Coppercoat. -Rebecca
Anyone. How often does a boat require painting with the consideration that it is always done clean and proper? Also could you apply plastic sheeting to the hull?
Depends on the quality of the paint used, how well and thick it’s applied, where you cruise and what hits you or what you hit...and how pretty you like it to be! We paint ours about every 10 years or so. Twenty year old boats we know well have never repainted. -Rebecca
I think you get it right there with water and alcohol cleansing, since indeed acetone is leaving a residue film afterward, and only water will not remove, but alcohol does. Since I have been working in the semiconductor industry to clean semiconductor wafers before processing, that is a susceptible process. Cheers.
First i would appologise, becouse my question will not be about coopercoat. Very expensive here so i never thought about it. U know so much about boat repaires, i would like your thought on painting a fiberglass repair and general painting the deck. Should i use gelcoat on a small fiberglass repair 20inch or a two part paint? And for the deck, it's really old pretty rough original with build antiskid, can i just degrease it and paint over it with 2part paint used for top sides or should i use primer first. It's lightly used, do u think i could get away with a thin layer of 2part paint on a non skid sections (in pretty good condition, still lots of profile left) or will i just even the whole thing? Thank u very much for your replay.
Thanks for your vote of confidence but I don't know as much as the pros who do this work every day in all sorts of scenarios. If I had a newer boat with unpainted decks, I would stay use gelcoat to try to match the existing. Since ours is a very old boat with decks that have been painted, I use two part paint for a finish coat. All new fiberglass is first primed with a two part primer. Since your other area to be finished ia "really old pretty rough original with build antiskid," I would think there should be enough tooth to hold a new coat of two part paint after first completely cleaning the area free of all dirt, grease and contaminants and wiping well with acetone. In the smoother areas, you would certainly want to first sand with 320 grit paper. It is really hard to say for certain without seeing it for myself. If you really want to be certain of success, it is always best to first use a two part primer. Not all the questions have to be about Coppercoat ;)
@@RVLifeNOW, thank you very much for the bother. Boat is anything but new. It's an '68 amel alisio. I will get hold of some good primer and give it a try. It looks pretty awfull now and i would really love to give the old girl some much deserved love. Thx again and may the sea treat u kindly.
Thanks for your question. If you watch the video about our deck repair on the bow...and read the comments, many comments may give you some ideas too. -Rebecca
Klemen, please consider All topcoats and Finish coats to be transparent. Whatever you see before the finish coat, you will definitely see after the finish coat. And the solution is not another finish coat (or two, or three) if you see blotchy stuff through the first finish coat. That's the value of Always using a primer either white, or tinted a compatible color. After you paint the finish coat, you will see "one" color, not several shades. After the first finish coat, wait 3 weeks, don't try to "even out" the differences in different areas. Time will even out light or dark spots quite effectively. Yes, you can just degrease it, scrub it well and remove all the residue of the cleaners. It is easy to paint away a non-skid pattern. That is, to change the non-skid into something slippery. Make your coats thin, not thick, to minimise this effect. If you are not a professional refinisher, I strongly believe you will always see more satisfactory results painting, rather than gel coating. The paint Does Not have to be two pot. Two pot paints will always be more transparent than one part finish paint. Two pot paints can be very difficult to sand. Yes, they're longer lasting, but there's a price to pay. If you are hiring a professional to do your deck, do exactly what they recommend. Then it's their problem to deliver. Thank You
@@martyspargur5281, i have a primer to go with my 2part paint i just have to see what thinner i can use. I don't want to cover my non skid, since it's really good. Thx for the tip. I will paint it with 2part since i already got it. I think it will not look worse then it does now.
Ha..if that’s all we have to do to this antifouling, that will be fantastic. We have to do that to every kind of antifouling we have ever had anyways. One guy here tells us he never ever touches it, just hauls it out and pressure washes it once a year. That would be nice, but that sounds too good to be true! -Rebecca
Have you found it any more frequent than with traditional antifouling? I would hope less. And were you able to do the final sanding with the recommended 320 grip paper to look like the picture in the instructions?
Wow..that’s horrible..maybe worst than hull blisters or bottom painting jobs! we have seen an old fiberglass boat, built in Taiwan, that had teak eaten up by termites. -Rebecca
Have you done any airless spraying? I have done a lot of airless spraying and can see, it is far safer to just roll the stuff on. It would take a well coordinated effort to spray and would be nice to have that fine, smooth, finish. Coppercoat does train professional applicators on how to spray Coppercoat.
I had copper coat but after a few months it was full of barnscles and calcium worms in the Mediterranean. I cleaned, scratched and sanded the fuselage any four weeks but in vain. We applied very carefully according to the manual with three people. Nevertheless I exchsnged the voating with International WA which is now after 2 years still clear of anything. And it seems to last even one more year. Never more copper coat!!!
The S. African coast will be fun to show. But first I have all this video of fixing this boat to put together. I just made a strong pole to attach the under water GroPro to, so maybe I can get some underwater video of the Penguins swimming in front of the bow, rather than dolphins. Also, if the weather allows, I want to get in close to Cape Agulhas for some ocean side video....Cape Hope as well. We will see.
Patrick Childress Sailing the penguins would be a plus but the most I have seen are at Boulders beach south of Simons Town and that would be close inshore. I’m no expert 😊
I have Coppercoat on my Rival which was professionally applied a few years ago for a previous owner. I touched up a few spots last year but other than that it has morphed great, even when there is some weeks or slime growth it comes off real easy. Hope yours works well..Andy UK
Great. I was on my boat at weekend. Moored Chichester Harbour and has been in since May 2019. No weed on waterline and minor slime on hull. Rudder has some longer weed but not much really and all easy to scrub off. If it was warmer I would get in to do it. Andy UK
Andy UK - SY Corrival - Rival 32 Xcellent..thanks for the update. We have a post on the short term details of our now after 7 weeks on Coppercoat. I know...too short to tell, but antifouling for us actually fails pretty quickly...so we were curious to see what direction this was going. It will be on the blog in a few hours. -Rebecca
The Coppercoat was $1750 (11 kits) , and the rollers, brushes, bucket, acetone other were under $100. The labor for the day of prep, application then , sanding 3 days later was about $300 but remember we are in a lower cost area for application. Of course the preparation for our hull with all the blister repair, fairing sanding, etc, irregardless of a Coppercoat application, was months of work, and probably $2000 in labor and lot of materials were used. -Rebecca
Well remember we are NOT paying professionals to apply it. This is just for the Coppercoat paint itself, the rollers, and buckets. Isn’t bottompaint in the USA about $250 a gallon...and we would need 5 -6 gallons. It’s cheaper in other parts of the world...and more in others. Coppercoat hence is about 50% higher talking materials costs only. Then the rest depends on if you hire the “pros”, or do it yourself with your teenage kids like SV Totem did, or with some other cruisers you round up, or other. I can imagine to hire pros in California to prep and/or to apply Coppercoat, or any antifouling paint for that matter, would be astronomical! Maybe best to load up on Coppercoat material before leaving the US, and sailing to Cartagena Columbia, or some other location with cheaper labor costs...or just diy. It’s very very possible to apply Coppercoat yourself. Just read and follow the directions, ask a lot of questions where it isn’t clear, watch videos, and read blogs about proper Coppercoat application. -Rebecca
william avery If we applied the Coppercoat properly, it will last 10 years...15 years...we met a happy boat owner in Richards Bay, South Africa that has had it for 15 years, and still has no plans to do anything again any time soon. Would that not be heaven to not have to apply antifouling for more than 15 years!!! Fingers crossed! -Rebecca
Good Luck! With all of the environmental well meaning regulations there are unintended consequences. Like boat hulls need to be re-sanded, painted frequently (resulting in more product and painting supplies used) and scrubbed sometimes monthly. The new stuff doesn't work nearly as well as the old "red lead" antifouling paint we used in the 60's and 70's. The US Government and military continued to use the "good stuff" when us U.S. taxpayers had to switch.
The epoxy resin very slowly erodes exposing the copper which is anti-growth. It becomes green as the copper oxidises and that is slowly eaten away exposing the resin to be eroded and so on. Coppercoat say it lasts for 10 years but frequently it last well longer than this. I saw a boat with a bright green copper coated hull after 18 years. It only needs burnishing after the application, not again.
@@RVLifeNOW I dont know what kind you used but the kind I am talking about is used on engines to seal head gaskets here is a link there are different brands of similar productetc.www.amazon.com/gp/product/B000M8NZ8E/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@@delukxy Without looking I dont think it is a grease more like a high temp silicone gasket adhesive . It is very tacky. The point is mainly that it is sprayable with a fairly high cooper content leading to believe one may be able to spray on the boat product as well with airless sprayer and less likely a standard sprayer but this is just conjecture since its a different product.
Coppercoat's extremely specific but unexplained instruction quirks almost seem like they are creating reasons for claiming their failures are application errors. We do a lot more horror stories than praise.
It is surprising their instructions are rather thin. Hopefully this video will help out Coppercoat and anyone thinking about applying Coppercoat. We do find manufacturers instructions to not always be correct. We like our Kiwiprop but the manufacturers instructions are that you don't have to prime the Zytel blade prior to applying antifouling. From experience, I found that to not be correct. We now always prime those blades when using traditional antifouling. Now I follow the Propspeed directions for metal when treating the plastic blades and put them through the same etching primer process, with good results. Some of these manufacturers need to listen more to users in the field.
Yes. Finally is right! It’s hard to believe we have already been sitting at this dock after our haulout, for nearly 7 weeks. Patrick is gonna jump in this murky water this weekend and have a feel around (since it’s impossible to see in this water) and see if he can get a peak at how the Coppercoat is doing!-Rebecca
Yes, it has been a long haul here in the boat yard. Next weather window we will be off to Cape Town.....but Rebecca has lined up even more boat work for me..lithium batteries. The work never ends.
Do you agree that our Coppercoat application will be a success? Please leave a comment below...
Have you used Coppercoat antifouling?
Would you like to see video from one of the many guys we interviewed that have used Coppercoat happily for many years...it was too long and off topic to include that Coppercoat review in this diy video, but let us know if you would like to see that soon.
Please ask any question you have about our Coppercoat application or its future success if you are watching this months or years from now about whether it turned out a success or a failure...Certainly that will tell us if the application of Coppercoat can tolerate some variation in its application
Please let us know your vote...so you think we will have a failure or success with this application of Coppercoat?
Great news to hear of your Coppercoat success. We hope we will be able to say the same. It sounds likr our situations wwre similar in that we had to do a major blister job...so it was a good time to apply Coppercoat! There are some bad applications of it out there, and of course the failures always make the headlines, but of all the people we have spoken directly to, Coppercoat has been a success on the majority of boats. But a bad application of Coppercoat can really send people running when whatever the applicators applied probably would have been a failure! -Rebecca
@Joseph Johnson What do you gently scrub the Coppercoat with?
Your hull really looks great....super fair and smooth!
That's interesting about recommending finer sandpaper to burnish the coat. From what others have written, glossy varnish resists mildew better than satin because the smooth surface makes it difficult for the mildew to get a foothold. Sounds like the same thing with coppercoat.
I've been thinking I would try it with my project boat, but it sounds as though finding enough people willing to help could be an issue for me.
There is something in the video that has me puzzled: at 8:30, there are what appear to be strips, raised areas, on the port side of the rudder. Are my eyes playing tricks on me?
Patrick Childress Sailing sailing Britican had some issues with their coppecoat, they redid it 3 times, and now waiting for the last layers result. Edit. And you addressed that already 👍🏼
Yes. We think that was an application error...and we pray that we didn’t make the same mistakes that the pros did. At least if we did, it didn’t cost us 10-15k!! Their second application was really an application ...it was a patch job and the patches worked. So it was just the original Coppercoat application that was the problem. Application is everything with Coppercoat and fingers crossed the issues we had were overcome properly. -Rebecca
Patrick, I really appreciate your honesty and the way you narrate your video. You did a great job. keep up the great work. Happy sailing
Thank you very much, nogaffin, such comments are greatly appreciated.
Patrick and wife.
I think your process was completely appropriate, in lew of conditions and weather , also a hardy , cheers for doing the work that you have in , well , less than first world sheltered and air-conditioned boat yards . Says an awful lot about you two's fortitude. Again, cheers . From California..fair winds folks.
Thank you, William. It was a long difficult haul out but Brick House is far better for it. Emanuel, Sip, Sipo and Telanti, as well as some of the others who spent time on this project, were great synergy to get me going, and keep the process going, pretty much 7 days a week till complete.
Hi Patrick & Rebecca! Great video on the Coppercoat. That product looks so pretty on a boat! I hope it works out and it appears you did the best you could considering the circumstances plus you had a pretty good crew helping you. Look forward to seeing videos showing how the CC is holding up on Brick House. Thanks for sharing!
Thanks David. We do have high hopes for the Coppercoat.....Rebecca will shoot me if it does not work out, as it was all in my hands.
Haha.nope not a chance I will kill him over a Coppercoat Application! He did the very best with the situations as they occurred. Now we will all know if the mistakes that the original applicators of Briticans Coppercoat made small mistakes intelligently...or if they made major blunders. I am afraid that we made enough mistakes during our application of it that we are going to have a failed Coppercoat application. But if it succeeds, then that says to me at least that that original Coppercoat installer really made some major mistakes OR that Britican has a unique problem on their boat that is inhibiting the effectiveness of the a Coppercoat epoxy. -Rebecca
I love this blog, i left my native SA a long time ago, but in my student years i used to work in a factory building houseboats alongside incredibly skilled men who trained on the job and did an excellent job at fiberglass, cabinet making and vacuum press lamination and moulding. I miss those days and that awesome team
Thanks so much. You come from a wonderful country, no doubt...
Glad yall are back in the water. I wouldnt have used Coppercoat. It seems too complicated to install. I have been following sailing Britican as well. What a nightmare. You above all people should have the correct technique to apply it though. If you cant do it, nobody can do it. Most of us out here in youtube land are just Hacks. However, I dont even trust a boat yard to do a good job either. I sure hope yours works as expected.
Pate, I know of a boat owner who recently had traditional antifouling applied to his boat in Malaysia. After one week, the paint was peeling off in sheets. I would not trust boat yards to do anything unless I was standing there watching every moment.
pate allan 2.5 months later I have to say it’s overwhelmingly better than the boats next to us, some that were launched weeks after us. So maybe not as picky as we were afraid of. But the true test will be in a few years or a decade. Though usually our bottom paint is almost failed by now. So this is a good sign we may have a Coppercoat success! -Rebecca
Patrick,that was intense! I’m about to do a bottom job as well. So glad I got to see this and that you took the hard effort to film and cover the project, literally. Cheers! 🍹
Glad it was helpful. It was a lot of work to film it so always happy to hear it may be of help to someone today ;) The far bigger project was digging out, patching and faring all the resin blisters. Incredible amounts of local labor, and mine, went into that part of our haul out. I am editing that video now, which should be ready in a couple of weeks.
From my experience, coppercoat is a very effective antifoul bottom paint. And I would say you’re good to go for many years, it don’t look like it’ll fail. What appears to be most important is you have to prep your bottom really well, which you did. So yes, coppercoat is expensive, but if you consider this cost for at least 10 years it’s not more expensive than paints that you need to change every year. For the last 5 years all I had to do on my boat was to wipe the hull with a green pad once a year, and never had vegetation or anything else (my boat is in France so in not so warm water yet). The only problem I had with it was with galvanic corrosion, my center board showed real corrosion after 4 years, so you need anodes everywhere possible. I’m so happy with this product that I think I’ll do the same to my new boat next year. I hope you’ll be as lucky as I was with this product :)
Great to hear of your success with Coppercoat. You are right about the importance of a nice smooth boat bottom in preparation for Coppercoat. And that we certainly had! We are happy to hear that in your opinion the snags we ran in to won’t bother the success of our Coppercoat. It’s speaks volumes that you will apply Coppercoat to your next boat too.
And it doesn’t tha energy to be more expensive than any other bottom paint...well, 50% more I would say. But the years and decades you get from it..to think traditional antifouling paint is cheaper is being penny wise and pound foolish! -Rebecca
Brick House was already in the water when we went for that meal so the anti foul had most certainly been applied!
Great job and a great video! I particularly liked your excellent step by step narrative and the details. Fair winds and thanks again!
Thanks for joining us, Panzer.
good good, great video, congratulations, I'm a fan of you here in Brazil.
Thanks so much Vitor. Do you have Coppercoat in your part of the world? -Rebecca
What a beautiful looking vessel. I like your style of video, very honest report
Thank you for that nice compliment...we think she is looking pretty nice too with her new paint on the topsides and new Coppercoat on the bottom :) We hope it will work. Patrick took a look yesterday underwater (4 inch visibility) but of course it’s only been 6 or 7 weeks..everything should do well in that short time. This is a very bad area for marine growth...in other words...very nutrient rich and stuff grows fast. There was one area that was nearly impossible to get the Coppercoat on to, and it had barnacles...so I guess that stands as an example of what it could have been. But the rest of the hull just easily wipeable slime, so it’s not a complete, immediate Coppercoat failure at least. In a year we will see if it is a success...2 years...4 years...will post reports on our blog at the very least. -Rebecca
Patrick Childress Sailing Thank you Rebecca for making contact. I am considering copper coat on the strength of your report and have lodged an inquiry - I am in Australia and our conditions would be not dissimilar to yours (still?) in Sth Africa.
It’s amazing how many emails about Coppercoat we have received, and comments we have gotten. It seems like the failures on any product, marine or otherwise, really make the news.... and it seems like everyone has seen Briticans Coppercoat video...But for every failure of Coppercoat, there are so many happy satisfied owners that don’t even watch or comment on antifouling videos and forums anymore because Coppercoat has taken antifouling right off their topics of interest. When it works, which seems to be 95% or more of the time, it’s all good. But I suppose if it didn’t work, especially if you paid a professional to apply it, it would be hugely irritating and you would want to tell the world of your bad review of Coppercoat!
Some products are more forgiving than others, traditional antifouling...it doesn’t often matter...apply it right or wrong, it still doesn’t work for more than a year. But Coppercoat applied right seems to really do the trick for a decade or more! Nothing ventured, nothing gained. -Rebecca
That's a fine video, fingers crossed for a great long lived effective job.
Thanks, Soggy. We have been sitting in this very nutrient rich estuary water for 6 weeks now. Part of the prep for departing in a few days for Cape Town was to go into this muck water, with 4 inches of visibility and give the hull a wipe with a large, flat, soft sponge. I worked more by feel. What little I could see and what I could feel, everything is appearing to be working as it should. There were 3 little barnacles on the hull, at the tight junction where the drive shaft enters the hull. Actually I was happy to see and feel those barnacles as it shows what could have happened if the Coppercoat was a fail on the rest of the hull. The wipe with the sponge took a fraction of the time it would have taken to clean traditional antifouling free of sediments and whatever.
Your boat is looking fantastic!
Thank you. It has been a long, intense, grind, but I will now feel much more confident while crossing oceans in this boat. We have a bunch of video material from this haul out. Thanks for your comment.
Glad to see you back in the water. Even though the haul out was very informative. Good luck with the Coppercoat. From what I have seen- when it works, it is terrific!
That’s the feedback we have seen too. When Coppercoat works which seems to be 95% of the time, it is terrific...we hope we are in that 95%. It was hard getting the right supplies here to follow the directions...it would be best to apply it in a first world country or order everything from overseas if not in a first world country...but hopefully our Coppercoat application is a success and the idea of antifouling will slowly slip from our vocabulary until someone ask us. And then we can be one of many that sing it’s praises. Oh I hope so! We did have some complications that could mess it up, that’s for sure! -Rebecca
Another great video thanks guys!
Brick House is looking real good in this video you have done a great job on her by the looks of it.
Thank you Smeggy. It has been a ton of work but it would not have gotten to that point without the help of most of the people you see in this video. I really like working with these guys; they keep a synergy going.
Very informative video (as always)! I watched the Britican videos also - hopefully yours will work out. In any case, by the time I get out there enough people will have had experience with the product that I can build upon.
There seems to be a "glitch" in the Tip Jar... I'll try again later.
Thanks for trying...wonder what it is...let us know if it doesn’t work on your next try. You can always just use my email address and PayPal...I think you have it from prior correspondence. Thanks as always for your support..you have supported us from the beginning*, and we greatly appreciate that! -Rebecca
I'm crewing on Britican right now. The boat is in the water for a month and a half and there is hardly any growth on the hull.
I think this time the CC is going to work, I hope it works for you as well.
Great to have an up to the minute update on their Coppercoat. Have a great sail and say hi for us.
@@RVLifeNOW I'll give you an other update in two weeks just before I have to get back home.
Dutch Globetrotter , hi , I am thinking of buying a wonderful wooden topsail schooner about 60/70 feet . Say hi to all on Britican and ask how is the kangaroo going.
Thanks...we would love to hear how Briticans Coppercoat is going before you leave. It seems like with Coppercoat UK right there doing the whole job it has to work! I really think it was just the first application of Coppercoat that was done wrong. Everything after that worked, including the patches that Coppercoat US came out and supervised. It’s a shame that first application went so wrong because it really brought some negative attention to Coppercoat. 122k people watched the first video, and then so few watched the videos after to see the follow up information. And probably nobody will watch the success of it. So many people like to see the failures of a product. But are videos often made of the successes of a boring product that remains underwater on the hull of a boat all its life, like Coppercoat? I’d like to think we will make follow up videos on the review of Coppercoat..but in reality, it may drop off our radar...I hope it does ;) But Patrick is quite interested to see if his diversions from the directions will cause the Coppercoat to fail or succeed, and why. He really wants to get to the bottom of the Coppercoat failures so there doesn’t have to be anymore. Aquarius Marine Coatings who makes Coppercoat May just be so tunnel visioned that they may not be understanding the failures properly, and with Patrick’s experimenting, they may get new insight.I think that’s why Patrick is so focused on this. He would like to be the one to find out WHY Coppercoat fails sometimes. He loves that kind of discovery. -Rebecca
Pulling that tape is such a joyous occasion. (And I'm so glad that someone besides me does the Hope/Horn/Hope/Horn thing)
Thanks for that. I’m not sure I will ever get that down, even after I sail both of those capes! I just HOPE, that I can blow a HORN after I sail around both of these capes with a clean boat bottom!! -Rebecca
Heh.. I kinda prefer the original name.. Cape of Storms.
All our old local waterman use copper coat on their boats. My Dad had a 42' deadrise pilot boat/dive boat and it held up very well for 5 years. At haulout we light sanded it clean and allied another coat. It's the layer buildup that helps. The more actual copper content the better, it also helps eliminate electralisis.
Good to hear another positive copper coat review ;) -Rebecca
I wouldn't think it would work well on carvel or strip-plank boats which are galvy fastened.
Thank you so much brick house I have been struggling with my copper coat and now I feel much more confident in my plan of attack can't thank you enough for your videos
So glad to hear we could help. It’s funny....Coppercoat is not just a typical epoxy, and it’s nothing close to an antifouling paint in regards to its application. There is a lot to understand and think about in the application of it. But once it’s understood, and the proper methods are employed, and the application of the Coppercoat is done correctly, the success rate becomes high...guaranteed almost...it’s all in the application, and doing it properly. Not always easy. But certainly worth it once you’ve got it doing its thing.
Personally I think counting on a “professional” to do it is the worst recipe for disaster. Learn the process thoroughly yourself, and do it yourself. Hire some guys to help you. But you must be in charge, know what you are doing...and then it can be done properly. Nobody cares more than you!!! -Rebecca
Josh, I would like to hear of your Coppercoat problem and how you might attempt to fix it.
@@RVLifeNOW Well It is an absolute honor to speak with you guys And thank you so much for taking the time I can't say enough good things about your channel
I used acetone and the wrong rollers probly let it set in my roller pan for too long
@@turdferguson236 How long ago did you do your Coppercoat job? I would be very interested to hear it works out for you.
It was great yo have you here guys!Enjoy and stay safe🤗
Hi...who is this? Thanks for having us! We will let you know on the success of our Coppercoat ;) -Rebecca
@@RVLifeNOW It's Maja from Maputo
Haha...well hello! Are you coming down to Richards Bay at all with Mike! He is discussing bottom paint/antifouling of your boat, right at this very moment ;)
Thanks again for having up there...that was such a huge help to us! -Rebecca
@@RVLifeNOW Yes I will come to RB too to see how work's going😊
You certainly made it a fun stay for us. Now we get to help Mike here in RB.
Happy New Year Patrick and Rebecca! Brick House is looking Good!
Thanks Sonny! Patrick wants to go down and take a look at the Coppercoat ...like he can see something in this murky water...but at least we might see if it’s a total disaster or is at least working as well as other antifouling would be at this stage. -Rebecca
@@RVLifeNOW OK Please have patrick do a follow-up video on the coppercoat. I am in the midst of a repower and just completed the bottom job all work being done by me. It is so satisfying seeing the completed job.
Ok will do a Coppercoat Video Review and happy new year to you too! ...and will let you know personally right here how his look goes in a few days too...if anyone else wants to know...please comment below.-Rebecca
I used Coppercoat on my 45CC. It took me 3 weeks doing all the work myself. Launched in May of 2019 in the Chesapeake Bay and the boat never moved until November of 2019. I hauled her out at Hilton Head to put a new dripless shaft seal in mid December. . The bottom was perfect, nothing at all. It's now March and it is still perfect. I was really afraid it would fail but I followed the instructions, every last detail and it worked.
Good report..thanks for the comment. Yes, it’s pretty well known now that if you follow the Coppercoat instructions precisely, that Coppercoat will work very well, and last for 10 or 15 years. I sure do hope it does for us. After almost 3 months now, we are having the same results. But we do give it a wipe with a sponge every 6 weeks or so as we are in a very heavy growth area, and we don’t want to find out that we should have been wiping but because we didn’t, something took hold. You should see the boats here...they have the most beautiful reef systems attached to them! Coppercoat could do well here in S Africa, but its difficult to obtain, so I think that’s why it’s not that much in use here. Though in Richards Bay quite a few boats had it, and had had it for more than a decade with great results. No bad reviews there at all.only good ones on Coppercoat... haven’t met anyone here on the Cape Town side yet that has had Coppercoat. -Rebecca
Great video! Uber-informative....thank you for your meticulous instruction and process.
Thanks Paul for your comment. Hopefully they can help other people get their Coppercoat Application just right so they can be one of the Coppercoat success stories ;) -Rebecca
It will be fantastic to see your voyage either through Tristan D'Acugnna and the Malvinas or the northern rout to Tierra del Fuego and rounding the Horne
I am not so sure about the Horn, as the Beagle Channel is much easier. But there is a charter boat out of Ushuaia, that makes a run around the Horn and back....maybe we will do it that way. Best to beat up someone else's boat.
the best things when copper coating it make sure you properly keyed (primed) you hull.
the main reason the recommend foam and not hair roller, is once a certain amount of copper has impregnated the foam it will help evenly spread for better results.
But hair rollers will constantly pull copper off the hull and move it around in clumps. the hair also has a tendency of just not rolling so you get an uneven spread if you use the roller for too long. as well as bits of hair getting stuck onto the hull which will give growth something to grip.
coppercoat is love or hate.
Love: if applied properly youll only need to take the boat out of the water for a pressure was once and a while. as well as not having to apply antifouling for the next 10+ years. good for long term in the water vessels.
Hate: copper coating is rather expensive to both apply and remove if not applied properly and must be removed to try again
its almost the price of antifouling for the next 10+ years.
We did all the Coppercoat prep and application ourselves, with helpers. That was far less the cost than paying a contractor to do the work. Apparently, with one ailed Coppercoat application which the Coppercoat company went out to resolve, they just sanded the existing Coppercoat to give tooth for the new application, then primed the surface with the epoxy resin with no copper mixed in. While that priming coat was tacky, they started the new Coppercoat application. Thanks for your good information and comment.
I have had issues with plumbing copper fittings & electrical wire, both manufactured in China, prematurely failing because they were not the copper content they were suppose to be. This issue could carry to the copper powder as well. Great work and thank you for sharing your ideas and expertise.
Yes, that could very well be. I would only think Coppercoat gets "certs" on the copper they buy to make sure it is of the quality they expect....especially if the stuff comes from China.
thanks for putting this up, very informative.
Thanks..
A little bit of an update is in the latest video…
great video! We are preparing to repaint, and are in the process of choosing what will work best for us.
Avocet, I would really be interested to hear what you choose.
@@RVLifeNOW stay tuned!
Are you considering Coppercoat? It seems if you get the application right, which is not that difficult to do, ecspecially if you are in a first world country, the success rate is pretty high. Of course you hear more frequently about failed applications than successes..The successes often get forgotten about because bottom painting becomes a non-issue with successful Coppercoat applications...but failed one...well that isn’t easily forgotten about. So no news is good news. yes...please let us know what you eventually use for your antifouling! -Rebecca
@@RVLifeNOW We have a lot of considerations right now!
I imagine you do. I hope you find some antifouling that works for you...Coppercoat or other. It’s a pain to haul out and find any worthwhile paint at all once you get out there, so make it count, whatever you choose! -Rebecca
Hey guys. Totally wonderful to see even a little bit of Richards Bay SA. I am a SA expat currently living in the far north of Sweden. Please go to Cape Town... I am sure it will be worth it. It’s where my heart belongs.
OK...you got it...we will go there in February, for sure. We have been told to try to film our Coppercoat success here where the water is warm, since it will be very cold to get in the water in Capetown! So we may do a very short Coppercoat review a few videos from now to show what it looks like after about 7 weeks in very rich water...to see if the Coppercoat is working at least short term. Of course that’s not long enough yet to see if the Coppercoat is working...but at least we will see if it’s not working at all. And we are at a good point to give it a wipe and try to see how it is. Water so murky here, it may be more of a feel job that anything else. -Rebecca
Patrick Childress Sailing absolutely. Remember that the water will clear up a bit once off the coast. Are you guys going to pop into Durban or are you going to give that a skip? I lived there a few times too. Further down you have Port Alfred which is just beautiful... interesting entrance tho.
South of PE ( Port Elisabeth) you have the absolutely stunning Knysna and timing is key when entering thru the Famous KNYSNA HEADS. Not to be missed tho. The Garden Route, by car, is so very pretty, but to sail up into the towns surely must be even more so. After Gaansbaai and Kleinmond you sail into False Bay which will test even the best sailing skills on a blustery day but Simons Town is a must, it’s where I got married, and nearby my first daughter was born. A beautiful part of the world.
I lived in Port Alfred and Knysna. Yes beautiful but tricky getting in and out. Saw a few boats come to grief out of Port Alfred.
michael bundy Needs some careful timing!!!
The Grumpy Sailor OK...we are in Cape Town with the boat now...just drives today. Looks like our Coppercoat will get a good challenge here looking at the bottoms around us!! -Rebecca
Nice job and Good Luck with Copper Coat. I think the secret to success is doing it right and having reasonable expectations.
I have met happy and not so happy owners to boats with copper coat. The big difference has been owners expectations. The ones that understand that diving and keeping the slime is part of the deal off are happy. The ones that think nothing has to be done in the next 10 years will be very disappointed.
On our prop and shaft, we applied Propspeed, as we have done in the past. It seems boat owners have the same unreasonable expectations about that product, thinking it is a magic product which eliminates all maintenance. Where we will be heading in the next couple years, the water is very cold so, hopefully, I won't have to get in the water so frequently, with the Coppercoat and Propspeed.
Patrick,
Thanks so much with all your insight and honesty with the Copper Coat application . I have always been very curious of the longevity of such an application . Although I believe it is not allowed in the USA anymore.If it does work well and lasts , I know that when out of the country I wold like to try it . So thanks for all the tips on how to properly apply it .
Robert
North Star
Twisted, we had our Coppercoat shipped to us from the U.S.A.. You can contact Coppercoat U.S.A, at : info@coppercoatusa.com or go to their home page: www.coppercoatusa.com/index.php I hope this helps.
You may be thinking of TBT . Coppercoat is actually copper encased in epoxy and is considered extremely eco friendly because nothing really leaches in to the water. -Rebecca
Hi Patrick- Wondering, how does the hired help in these other countries take learning new processes than they are used to, how do they take criticism, and especially the guys you had to pull off the job?
It really seems no different than in the U.S. or elsewhere. People grow up with no hands on experiences, or tools in their hands, so everything is new to them. Many are intelligent and very capable of learning so it just takes a little time and instruction. They are very receptive to instruction,especially because there is a very high unemployment rate. I have helped along several local guys here who now have full time jobs working in this boat yard. They are the hard workers who, at times, I wondered how they could keep working so hard all day long. There are men who just did not work out, like anywhere. The two guys who were shifted away from the rollers have previously showed their skills on other projects. We just could not take the time to teach some roller skills. My boat was not the place to practice. It all turned out for the better as they were given jobs that were unforeseen, yet very important....like keeping the copper in suspension in the roller pan.
@@RVLifeNOW I love that you were supporting the local labour and encouraging them while they learned new skills. You 'taught a man to fish' as they say!
I’m a professional painter with decades of experience on a roller. Thinking I might try a system of application that, in my opinion, will probably be multiple times faster. It uses a 5 gallon bucket instead of a paint tray to work out of.
I would fill the working 5 with only a gallon at a time, keeping the material mixed by the roller itself as I dip into it to apply the copper coat. I would have a separate 5 gallon bucket containing 3 gallons of copper (constantly stirred by a helper) ready to pour, refilling my work bucket as needed.
Also, I would use a duel 9” roller system with 6 foot roller poles.
I would have one 9” typical paint roller with a 3/4” nap roller skin to apply a lot of gushing (but of course, being a professional, not dripping) material, then another 9” roller and roller skin - this one 1/4” nap - to lay it off with once the copper coat has been applied to a wide area. With that, I would have my helper (or helpers, however many are needed) mixing, stirring, and refilling new copper into my work bucket, holding one of the two rollers for me until it needs to be switched out. I think one could cover far more real estate in in a much, much shorter time frame that way.
Keep in mind, only a true, experienced professional painter with many years under his belt with a roller is capable of this.
I’ve done similar things with other challenging paints. Who knows, might work.
Thanks for the video, great job with it. But the reason I’m contacting you is to ask about the footblock (base?) that a keel-stepped mast sits on below the sole and above the keel. Got some questions. Do you have any writings on that? Maybe articles you know of? What is used as the block? Does it need to be faired to the bilge sides, bolted to the floor under the sole? Does it need to be just set in place without any structural fastening for movement of the mast? That sort of thing.
By the way, I have a Miller Marine, Ted Brewer designed 1983 (‘84?) Jason 35, S/V Jenna Simone.
Thanks guys, learning a lot from you.
Interesting approach you have to applying the Coppercoat. The Coppercoat is unlike anything you, or I, have worked with before. There is so much copper that it settles out almost immediately and needs constant stirring. I think a Titan 440 airless paint sprayer with a 0.015 tip would be a quick way but as you say with the rolling, everyone on the spraying team would have to have good previous experience. One person mixes and refills, one person moves the hose, one person sprays and one person is there to take care of the loose ends and be a backup. Spraying could be great or a real disaster.
For the mast step, the best material is Garolite 10 also called G10. It is an incredibly hard epoxy laminate and will dull a carbide tipped table saw blade real quick. It is expensive but is one of those boat things that once it is installed, it will be there forever so in reality, it is the only thing that should be used. Any mast step must be bolted down to its base. On top of that is bolted a fitting that slips nicely into the bottom of the mast to keep the mast from from sliding around. The Garolite 10 should be at least 1" thick. Forget using wood or aluminum. Take out your mast and you will be able to copy what is there. If you are near a rigger, they should be able to tell you where to get the G10 or it can be ordered from places like McMaster Carr, or maybe even Grainger. The rigger or a mast maker might have a water jet machine to cut the G10 to the size you need so you don't have to tear up a good blade. I hope this helps
Thanks so much for the quick response. I have two comments and two questions, if you would, sir.
Comments:
Spraying copper coat -
I thought about that but would not do it. Wouldn’t want to take the chance on those copper micro-particles fouling up and lodging in the nooks and crannys of my rig. And it’s not needed. A good, highly skilled and experienced roller man can apply just as fast (or faster) as a sprayer can. And you don’t have to clean the rig!
Mast base-
I have no mast base as my boat was never finished out by the boat builder. Mine is a semi-custom, a ‘not-quite-but-almost-one-off’ build, as it were. She was basically a hull, deck, and cabin, with portlights, bulkheads, hatches, and a sole below when I got her. There isn’t even a breach of any kind anywhere on the cabin top for a mast, either deck or keel stepped. No bolt holes, no cut-out, not even a marking as to where the mast would go. Just an expanse of clean, solid cabin top, like a powerboat. Again, it was bought by the original owner before it was finished so that he could finish it out himself so I have no existing mast base by which to refer or compare.
Questions:
The G 10-
Are you saying to pour a resin block of G-10 into a mold for a mast base? Or do you mean to use it for a laminate of gluing layers of wood together to build up a wood block? If the latter, how high (thick) should it be for a 16,800lb displacement vessel?
Immobilizing mast base-
Is a keel-stepped mast base supposed to be bolted down or otherwise fastened in place on the keel? or should it simply rest there, allowing free movement with no bolting, gluing, or fastening of any kind?
Again, thanks so much for the kind and timely response.
@@globyois Only a factory makes G10. You will have to buy a 1 inch thick piece of it to make your mast base. You will have to bolt it the the bottom of the bilge or wherever it will finally sit. On our boat, it sits on the bottom of the bilge and bolt holes extend past the G10 with threads tapped into the keel area. Any mast step must be permanently mounted in place It cannot be allowed to move in the slightest. Do not use any wood in the bilge area for anything. Buy the block of G10 from the sources I previously mentioned. I hope this helps.
Patrick Childress Sailing Yes, that does help, very much. Thanks.
I may be showing my ignorance here... but does the resin only work its way to the exterior of the hull? Or is there blistering on the interior as well?
We have never found any blisters on the inside of the hull, or on the deck or cockpit either. -Rebecca
I had wooden sailboat 5 years in a row, and did copper coating every preseason. I have never seen or did, such extraordinary complex tedius job as you did here. Coppercoat is all about layers, quantity of material And doing it fast. Absolutly no sanding afterwards. Flop it on asap, deep layers. Almost wet on wet. Can go semi-dried back into sea. Thats how its done in adriatic. Never did coppercoat in more than two days. 3 layers coat.
I always used monocomponent copper coating, unlike your 3 component. Why I do it every season? Its wood. If I do it every season, its out only for 3 days, and I dont need to sand anything off. Just a fast detail, hand sanding, and on with copper. On fiberglass boats, its done every second season. I rather pay for lifting, then do any kind of sanding. And every season, I have the sleakest bottom possible. And an easy job about it.
Janez, it sounds like you have something quite different than this epoxy vehicle I used in this video.
I hope it works for your needs. Its not the same material, i agree. But works on the same idea. Shouldnt be that different in use.
I wish you calm seas, and long lasting copper coat ;)
Great video :-) Very informative...
Thanks for watching...let us know what you think...success or failure? -Rebecca
@@RVLifeNOW I have no idea... I am just in the process of getting informed about Copper Coat... I've heard horror stories, but I don't listen to them without reservations... I'm interested in seeing an update from you, on how well it's working... :-) That, I'm sure, will take time... See you then :-)
@@RVLifeNOW Well... This won't take long - Did it... lol I have learned that all of the Coppercoat Horror stories, were from poorly applied coppercoat... Done right, it should last 15 - 25 years... Awesome! I expect that your next video on the subject will reveal how well you applied the stuff... and the results you experience... Looking forward to your next assessment of the job... :-)
We will be checking the Coppercoat frequently because we know people will be curious...as will we. Patrick is already itching, just 6-7 weeks in, to dive down in to this murky water that you can’t see further than 3 inches in, to explore the bottom of the boat, to see how the Coppercoat is doing. But it’s too soon to really know. But every antifouling is good after a month or two, right? The question is after a year or two! But if it’s a disaster now, I suppose there is little hope for its future, so better to find out now I guess.
Knowing Patrick as I do, the Coppercoat will succeed just becuase he knows this stuff..he knows what he is looking at, and knows when the instructions shouldn’t be followed, knows how to work around complications because he did sort of this kind of thing for a living in another lifetime. But I am a “by the book” kind of gal, so I am a little doubtful regardless. Everything says follow the directions exactly on the Coppercoat website and Coppercoat instructions...and we could not...did not...so I’m a bit nervous. Not that it’s any big skin off our back if it only works for a year or two. NO bottom paint lasts longer than that anyways. If we get more out of it than that, it will ALL be frosting! But we hear so many success stories when we really start digging and asking around boatyards, a girl can’t be blamed for hoping, even if things gave us a bit of a struggle. Could we do less than Coppercoat applicators that don’t care half as much as we do? -Rebecca
@@RVLifeNOW Skepticism is warranted... I too do not believe everything I read and having followed Patrick for some time, I am confident, he's more than capable... Looking forward to your next report :-) Btw, I have already recommended this procedure to other sailors... based on this video... :-)
Interesting video Patrick. We are trying to decide whether we should go with Coppercoat for our Moody.
Hope it’s helpful. We did do a Coppercoat antifouling update on our website about what it was like after 7 weeks of sitting in this mucky harbor...and it’s doing well. Not that 7 weeks is the sign of success...but at least it isn’t failing already. So our confidence level has risen greatly in that this Coppercoat will work for us!
I think the most important point to remember about Coppercoat is to make sure you thoroughly understand every bit of the instructions. Download the detailed Coppercoat application instructions from your reseller... Coppercoat USA in our case as well as Coppercoat UK’s instructions. Understand them 100%. Ask questions if you see a conflict of information or something that isn’t crystal clear for you. Consider a diy application of Coppercoat...or if you will hire the pros, assume that they may be forgetting some steps and get a firm understanding of the procedures with them. Don’t assume the doctor knows it all!
Good luck with your decision on which antifouling paint to go with! Send us an update...-Rebecca
Patrick Childress Sailing Thanks guys!
Love your cat head. Funny thing is the cat head helps with the anchor on tall ships.
By the way, I went sailing with Simon and Kim And Sienna( and how is your kangaroo going on Britican) on SailingBritican and had a wonderful time. They really know what they are doing and talking about. I would recommend them to anyone who wants to try sailing and see what’s it’s all about. I had a very wonderful time with then.
Yes out little Coati likes to be the center of everything...even in a video about Coppercoat ;) Glad you enjoyed your time with Britican. They seem like a nice family, and I think this time with the proper application, their Coppercoat should be a success. The problem wasn’t with the product...it was with the Coppercoat application. What exactly is still a mystery...wouldn’t want to be the owner of that original boatyard...but it was the application...not the Coppercoat product itself....I’m glad that they have it sorted out. If they don’t this time...then there is something happening with the boat itself. Coppercoat works on too too many boats for it to be the product this many times in a row. And if this application of it doesn’t work this time...then there is some mystery third situation happening! I hope and pray it works for them now! -Rebecca
My father had coppercoat applied by pro's ,although not cheap he said it was the best money on maintenance he ever spent .He sold the boat after 8yrs of use with this product ,he said there was very little difference in its condition at the day of sale apart from where he had had remedial work after minor marks and damage .
It is good to hear the positive stories. The negative make the news more often but we hear so many stories such as yours. Thanks.
Do you have a video on how you did your topsides? What paint, method etc. Looks great.
I am working on a 2 part video about taking care of all the blisters and painting everything. Part 1 will be the next video we put up.
@@RVLifeNOW great! Look forward to it , as we have some under waterline blisters and also need to do out topsides
You will love the next sailboat repair video we are doing then...what we did before applying the Coppercoat ;) -Rebecca
Hi guys, she looks lush! What an amazing job you did! Especially with sanding out the blisters and filling them up and such, rebuilding your boat basially. We have some osmosis too and will go through the same process. Can I ask what product did you use before you applied the coppercoat and how many layers? Cheers!
If you watch the 500 blisters video,it shows the products. AMT Composites in South Africa was great to work with and shared much advice with us as we went.
Very informative, thanks.
Can you tell us what it cost and did you buy the Copper Coat in South Africa?
The Coppercoat product we used cost around $1,800 out of the U.S.. We were very fortunate for shipping. We had new anchor chain shipped from the U.S.. Maggie Chain said there was still room in the barrel, if we wanted to add more boat parts to fill the void. If it were not for that cheap shipping, we probably would not have gone with the Coppercoat. People do ship Coppercoat to S. Africa for application on their boats, but there is no local distributor who stocks it.
Cool stuff. Looking forward to Cape Town (I lived there for a bit)
We are looking forward to Cape Town. With the next weather window, we should be on our way. It was blowing 60 knots in CT the other day!
Congratulations!👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻😁😁😁 About freaking time!
Thanks, nobody. It has been a long haul out of the water but all for the better so we can safely cross more oceans. It took us a while to finally discover Coppercoat. For some reason I always thought it was a $20,000 application that could only be applied by certified professionals. Turns out diy is totally allowed, and often preferably to professionals who don’t read the copper coat instructions! -Rebecca
Did you take moisture readings of the Hull before applying epoxy ,going by the photos and the drills holes with water coming from them the hull . It is saturated with water, what will happen next more blistering will appear all over the hull and the epoxy and copper coat will fall off.
Is this really Lex?Twice, since 1976, this boat has been treated for resin blisters. Each time the blisters returned yet nothing fell off....unfortunately. It would have been nice if the layers of bottom paint would have fallen off instead of taking weeks to remove it by hand.
Yes, I took a lot of moisture readings and over 5 months watched the numbers drop. Read up on moisture meters and it seems they are not that much use, really, as they can produce a lot of false numbers. But in my case, the meter was useful to show a change....and a pleasant one at that.
From your description, it sounds like this has happened to you. Please tell us more about your experience.
How much did the copper coat cost not counting the labor?
The Coppercoat itself cost $1750 usd for the 11 kits for our 40 foot boat. Materials for the application of the Coppercoat costed under $200. Labor was additional.
Patrick Childress Sailing I was just on Britican blog and there total cost was 11700$, there was surely something else done at the same time. Thanks for sharing
This shows how it can be very worth while to get your hands dirty and do the work yourself with helpers. Delos showed, on one haul out, how much money they saved by doing their own haul out work rather than throwing money at contractors, who often times one pays to screw a boat up rather than do the expected good job.
Their cost included professional preparation and application..ie the labor. If you go to www.coppercoatusa.com the prices are on there, and an estimator for how much Coppercoat your boat would need. Ours needed 11 kits to cover correctly. Briticans boat...not sure what size it was...but I know for sure they didn’t do it themselves. We did it ourselves and hired some $15 per day guys to help us under Patrick’s supervision and direction. -Rebecca
@@RVLifeNOW Delos spend nearly 50k on a new bottom coating whose SLICK attributes insured no sea growth would ever be able able to stick to their bottom. Live and learn.
excellent video Mr Patrick!! thanks....launching my cat Reload 'n Charge! tomorrow early, no copper coat.....but back in the 'oggen! Continue to enjoy your videos! Thanks, Andrew
Thank you, Andrew. I hope your launch goes well and you are off to some fun sailing adventures.
Is Coppercoat better than normal antifouling bottom paint?
Yes I think I would say yes to that…easy to wipe off with a sponge, as long as you do a pressure wash every 12-18 months.
@@RVLifeNOW Wouldn't it come off when you scrubbed the bottom of the boat?
No..it’s a very hard product..epoxy in fact. Not thing but growth seems to come off…
@@RVLifeNOW Amazing! ⛵
Hi Patrick and Rebecca,
I think that you were lucky to have had the extra days for the coppercoat to cure. Whenever someone complains about how difficult it is to sand an epoxy coat that they applied, I ask if they have given the epoxy sufficient time to Cure. Whether they use fast hardener or slow hardener, it still takes most epoxies 3 days to cure enough to sand effectively. Before that, the paper will just clog immediately.
And it is Very common for inexperienced people to UNDERMIX epoxies, or to not allow sufficient time for reactive sites to be found, both of which lead to an UNsandable coat. So a Maximum mix time of two minutes just doesn't sound logical to me, and "the copper won't settle out" sounds equally improbable. Not to mention the people who are volumetrically challenged, and think Any Ratio is a Good Ratio...being casual about ratios will pretty much ensure failure.
I would be reluctant to recommend anything other than what the manufacturer recommends, and I really have little experience with water-based epoxies. However, I would also feel like a complete idiot if my first pass sanding new epoxy was with 320. I guess they don't want you to remove everything you just put on, like the trailing edges, but it sounds counter intuitive to me.
From a Marine Professional (who quit the painting part decades ago), I wish to comment on your statement about how hiring a Professional was the wrong way to go. I do not agree that it's the wrong thing to do, but I wouldn't want any professional working on anything if they don't care about your boat. And a lot of them Don't. Working with your crew in SA seems like the best way I can imagine. You gathered as much info as possible before starting, but once you're actually doing it you have to be ready to adapt to whatever comes up.
I like your idea about using a different color for the final substrate epoxy; I actually like to use a different color for each Batch sometimes as well. Then you can tell exactly which epoxy was applied when. In Brick House's case, that would be modified to mean different layers, not batches, but it makes for some very strange looking projects, what with all those colors. The upside of course is people think I'm crazy and don't bother me asking for advice; rather they keep their distance. You get so much more Done.
Let's face it, I'm a Dinosaur: I believe in VOC's. I believe in shit like NAPTHA, PAINT THINNER (oops am I yelling?) that Doesn't have acetone in place of the turps, I love 333, Magic Magoosalum and all that illegal stuff. If I were to lay a teak deck, I'd probably lay it on TARPAPER, God forbid. Like for painting wood, I believe in OIL Based paint. Wood contains oil and once it has drawn its oil from the paint it is time to put some more oily paint on the wood. Plastic paints, on the other hand, simply encapsulate the wood in a membrane which is only good for growing mold and mildew between the coating and the substrate. All that rotten, moldy, wasted wood that is the result means it may have just been greener to use the oil base finish instead. Then you would still have the original wood, think of the trees you've saved. But that's another subject, isn't it? Did I mention Alcohol-free gasoline? That too. It doesn't ruin everything. Replacing whole engines just because the ruined one was running on PC fuel doesn't sound that Green to me.
End of rant, Rebecca. Take Care. LOL
Marty, I fully agree with you on all counts. The world is not changing for the better. On hiring a professional, I don't recall saying that, but certainly some professionals can make a real mess of things. I have witnessed that, repeatedly, in many boat yards. A boat owner needs to have a good grasp of the project at hand in order to know if the contractor is on the right track or not. I always like reading your comments. Patrick
@@RVLifeNOW Thank You Patrick.I'm far from the last word regarding any boat repairs, and I learn a lot watching your videos. Any job will have more than one "right" way. I like working with people who want to keep learning, and not discriminate against someone who may have less experience. Enthusiasm is more important.
Geez, man, feel better now that you've gotten all that off your chest ?? Take a deeeep breath, man !
I do agree with you on some points but not on all. EX: Water based rust paint was tried some years ago only for a big failure. Garbage.
For painting a house, non-COV paints are a great innovation. As well as alcool in regular fuel in cars, bringing a lot less emissions from cars and trucks. See, new products are not all bad.
PS Yes, I used tar paper too as an underlayment in my basement floor ! Not the over-expensive recommended stuff.
@@marcryvon Thank you Marc. Don't give up on me, I used Latex/acrylic paint on my house because I really liked it (it wasn't cheap). But on the wood I used what we call KILZ (primer), which is available in an oil-base version. I didn't use the water base.
It's the "oil base" Alkyd enamels that I am missing the most. I think that if a boat has wood that's worth preserving, modern water base paints are counterproductive.
For autos designed to run on alcohol containing fuels, fine. It's all the marine engines and their supporting systems destroyed by this fuel that I consider a pitiful waste.
Yes, I felt better immediately after writing that rant.
Are you on the Continent? In the US ( the EUA) or maybe just in California, we now have "paint thinner" that has acetone instead of mineral spirits. It's a joke.
Very informative. Thanks for the great video.
Thanks...you watched rhe Coppercoat video too?!? rebecca
Great video! Question: how long did you wait for the underlying epoxy to cure and dam before you started to roll CC?
See above
Great video! Question: how long did you wait for the underlying epoxy to cure and release the solvent before you started to roll CC?
We waited too long… it got hard fast in that weather. We waited about 2 days… should have only waited a day
Congratulations on getting her back in the water. It’s been a looooong time!
Thanks, atschris. It has been a very long haul out and very long working days. But the boat is far better than when it rolled out of the factory and ready to cross more oceans...even way down south to Tierra Del Fuego. We should be leaving Richards Bay for Cape Town in 2 days.
Yahoo..two days Hoping this Coppercoat application is successful and lasts a decade so we don’t have to do this again for a long time! -Rebecca
How conductive is this copper coat?
None at all. Another commenter recently asked Coppercoat that question as it might be a good grounding plane for various reasons....but, being encased in epoxy, there is no conductivity.
Thank you so much for this. Coppercoat was my #1 choice for the next bottom job before heading out to the South Pacific. However, I read so many failure stories (including Sailing Britican's) that I became concerned about the apparently finicky application process, even when performed by "professionals." I'm continuing with the usual paint for now, but depending on your long-term experience with it, may reconsider Coppercoat in the future.
If you are in the USA or other first world country, it never going to be easier to obtain the Coppercoat itself and the other required tools. But if you have to do a lot to your bottom to get it ready for the Coppercoat, maybe wait til you are somewhere with cheaper labor unless you have some teenagers or friends to help. Part of our issues were doing it in a less than ideal place where it was hard to find the right tools for the Coppercoat application.
Yes it’s finicky....but how finicky...we shall find out. Coppercoat when we spoke to them feels we worried about things too much...but yet you do see those negative experiences too (though those always make the news way more than successes) We made our share of deviations, and after 7 weeks it’s working...so our mistakes I guess were not fatal...but of course the big question is will it be working in a year or three, or in a decade...
If you are heading off for a circumnavigation, do what you need to do to the boat now...it becomes cheaper laborwise, but more difficult to do your bottom out in the Pacific in regards to haul outs, and finding any decent antifouling paint at all.. We did ours, with less than optimal paint but the best available in each location, and nothing ever seemed to work, in New Zealand, Fiji, Philippines, Borneo Malaysia, and then Mainland Malaysia. That’s 5 bottom jobs in 10 years...and every time was well past due. Universally, we had to choose the best of bad antifouling paints. I wish I knew then that Coppercoat was even an option for a lower budget boat like ours...I always thought it was just for the wealthy. -Rebecca
@@RVLifeNOW Thank you for sharing your hard-earned experience and wisdom!! I'll also be keeping an eye out for Selektope-based paints, which look like they could revolutionary, but are not yet regulatory-approved for sales in the U.S. I hope the Coppercoat works out for you for many years to come!
Silicone based antifouling paints were a strong consideration for us before we found out they can only be out of the water for 14 days....or you must completely strip and reapply. Nothing happens in 14 days in a boatyard in SO many places in the world...many haul out facilities are tide dependent monthly...not to mention making things happen that fast once hauled out.
So we decided against Silicone because we aren’t looking for antifouling paint that has to be taken off every few years when we haul for other things. We were looking for longevity so we don’t have to haul out just for bottom paint so often, and so our monthly scrubs are quicker and easier. -Rebecca
hi guys the problems you had with the epoxy and cleaning it can be avoided by using MAS epoxies they are great no blush no was no need to clean
we apply copper coat and we do add the alcohol we also mix in some virgin copper into that sent by copper coat as there is reclaimed gives us a lighter finish
but good luck on your next trip
The cleaning is to get rid of sanding dust, which is created no matter what sort, or brand of resin, is used.
thank you for that.
back in the mid 80's copper coat was the most common when i worked at marina shipyard, as i remember it. (not to say my memory was the best) but i don't remember having had to mix it.
non yayet, thanks for your information and comment.
Ha..you must have not been the mix man during the copper coat applications. Perhaps you remember rolling on Coppercoat, smooth and thin? -Rebecca
i was in the hardware store most of the time helping folks figure out what they needed, ordering parts, and of course mixing paint with the paint mixer! I think that's the key. i wasn't outside mixing it!
either way. good video, as usual.
lots of " how to" cruiser video's. but a rare few like ya'lls that is truly helpful and more importantly, honest reliable information. way too many rookies passing along bad how to information. so once again, thank you to ya'll.!!
I think it’s sweet you didn’t fire anyone you just gave them an easier job for their skill level.
thanks ashley. Yes patrick was a good boss :)
It's a huge job you undertook; really daunting. But each time I look at the videos I cannot get over the impression that the boat is barely propped up with those poles and is in imminent danger of falling over. Eight months of equipment vibrations and moving poles to paint and work under. At a yacht club in Canada (at least the one I am in in Montreal) we would never be allowed to work under without a steel/wood cradle or belly bands and the big travel lift. Is the mast secured with guy cables out of camera view?
Isn't that amazing how they prop up boats in foreign countries?!! You should see the much larger boats propped up in the same way with the gum tree poles. I can't say I was impressed when I first saw this but this is how they have been supporting boats on the hard, forever. They can't afford nice steel, adjustable, poppets, like in the U.S. or Canada. After they set our boat, I had them come back and add two more poles at the front of the boat, to make me feel better. The poles are solidly dug into the ground. Because of this, and the sandy soil, I could move the poles, and even the blocks under the keel, by myself. Anywhere else, it would have cost a small fortune to have a travel lift the boat so I could move the keel blocks and do the work needed. Check out all the bare feet and flip flops on the workers. Never did I see one of these people hop because they stepped on a pine cone or something sharp. Get away from the U.S. and Canada, and the cultures can be pretty hardy. I really did like working with these guys.
@@RVLifeNOW How ever did you sleep at night? A strong wind, or a good downpour to soften the sand... With every weather event, I'd be sitting in bed, arms wrapped around my knees and eyes the size of saucers gleaming in the dark... :^)
@@Markthesailer Local knowledge trumps gov't bureaucrats. Jack stands topple boats all the time in Canada.....
Not much up on copper coating but you weren't exaggerating yesterday, Coati looks almost big enough to take the wheel in a blow...
And yet he has not fully grown into his "snow shoe" sized paws. A real African cat.
Love the Zulu jackstands ... Wow, Coppercoat looks complicated, though everyone I've spoken to who has it on the bottom of their boat likes it. Keep us posted. The boat looks great! Have a safe trip around the Cape. Once you get west of Agulhas you'll think you're cruising the coast of Maine--chilly green water, fog, kelp, seals ...
The stands are gum tree poles. The tree grows very straight and very tall. They are allowed to grow to the desired diameter before clear cutting huge areas, like a farmer would corn or sugar cane stalks. They are very hard and rot resistant. Being sandy soil, it was easy to dig out and move the stands around, and even the logs under the keel, to get to untouched areas. No need to call the travel lift to move us. Hopefully, this coming week we will catch the proper weather to head for Cape Town. Looking forward to the west coast of Africa. I was in Cape Town in 1981 on my first solo circumnavigation. It will be interesting to see how it has changed. ...but everywhere in the world has changed, tremendously. I hope the chill has gone from Key West.
@@RVLifeNOW Interesting ... you could actually MOVE the boat without a travel lift, rolling her on logs? Um, yikes. Fair winds for your trip around. Key West is hot, cold, hot, cold ... and sometimes blowing a gale. Other than that, pretty nice.
@How to Sail Oceans It was not moving the boat fore and aft, on the keel supports, it was placing a new support under the keel, blocking it up as good as possible, then taking the hooked end of a crow bar and digging out the neighbor block. The boat would settle onto the new block. The soil is very sandy so the dig was easy. Once the keel is resting on the new block, the old support can be pulled out from under the keel and moved to the back of the keel, next to the support there. Then dig out the existing, weight bearing support, and the boat settles onto the new support. Pull out the old support and we have the previously untreated areas under the keel, now exposed and ready to work on, applying Coppercoat or the like. The travel of the boat downwards onto the new supports in only an inch or so but the jack stands/side pole supports have to be freed up and adjusted a little as to avoid too much pressure on the sides of the hull. Certainly a lot cheaper and easier than to have a travel lift mess with the boat. I was just thinking, it is going to be warmer in Cape Town, than Key West, this time of year.
@@RVLifeNOW Ah, that's right, you can't just touch up the places under the blocks with Coppercoat while she's hanging in the slings ...
Here anyways, they would not let you hang in the slings for more than a day, and with Coppercoat, you need to do the surface prep, then application, then 3 days later the sanding of the Coppercoat...so yes, best to be on stands, and then move them to be able to do the Coppercoat application properly. -Rebecca
Could you not spray it on the boat the copper coat ?
Yes you can spray it but not as easy as paint because of copper settling and drying time etc. but it’s definitely possible.
I have cc and the hull is green. Shall I keep the green or do I need to sand?
Green is perfect
I am afraid you need a new boat
Hi, thanks for the video. Why do you have a small hole at the top of your rudder? Also, I've had decent luck with ultrasound anti fouling on my Panda 40 in temperate climates. Doubt it could stay ahead of things the tropics, but just as a data point...
Is your boat, with ultrasound, in the water 12 month a year, or are you hauled out for the winter? The ultrasound companies we communicated with never came back with good enough answers to make us want to try it. Plus the high energy required to operate it 24 hours a day meant we would need to be plugged into shore power. Ultrasound did not appear practical for our modest, long range cruising sailboat.
The hole in the top of the rudder is an idea I got from our neighboring steel sailboat. If there is some sort of rudder failure, a line can be attached to that hole and set up an emergency steering system. I did dig into our rudder to inspect the steel spline, welded to the shaft, as it was made in 1976 and rust was dripping out the bottom. It was in surprisingly good condition yet we had the exposed welds, rewelded. Everything was sealed up solid so hopefully there will be no more water intrusion into the rudder shaft. One day, that will be another video. Thanks for your comment.
I haul out every other year, but up in the NE of the US, nothing grows in the winter. I don't recall the current draw of the ultrasound, but I never plug into shore power. I just have 300W of solar on my bimini, which more than covers the fridge (no freezer), ultrasound, and anything else, as long as we don't get more than 3 cloudy days in a row.
I get a few barnacles on the keel, but almost none on the bottom. Again, I'm based in the NE US where growth isn't that aggressive, so YMMV.
Hello, this is Rebecca. We were based in Newport, RI....so very familiar with the waters up there. Hauling every winter certainly makes a new coat of antifouling easy to do. Part of the spring tradition. But now I realize that doing that every year on the bottom of Brick House, despite always using self sloughing paint, the paint layer build up fast. The poison and a little bit of paint sloughs away but not the rest of it.
An application of Coppercoat, even in New England waters seems like it would be a great solution, saving money in the long run..And once a year when you take her out of the water, you get the usual pressure wash, then maybe again in the spring before you launch...and you don’t have to sand and paint that toxic paint. A tradition happily lost ;) Just one proper application of Copper coat paint, and no annual bottom painting for 10 or more years. There are boats here going strong with Coppercoat after 15 years! -Rebecca
When you buy 90% alcohol at a pharmacy, what is the other 10%? And what residue is left when using pure alcohol?
Grenadine, lemon concentrate, spoon of sugar and a splash of 7-UP. Anything that gets spilled leaves a stick residue.
@@RVLifeNOW That's funny! No, I meant some 90% alcohols are rubbing alcohol, and may contain stuff like castor oil and other chemicals that might not be conducive to adhesion. Alcohol and acetone are quite hydrophilic, they can absorb moisture and quickly become dilute and ineffective. None of the materials used around glass fibre are very good for you. We always kept everything bone dry, requires heavy duty extraction vacuums with filter bags, still a miserable job, hand lay up repairs to blisters. A boat is a hole in the water you throw money into.
Hi Patrick. Love your vids. You are my hero. I am embarking in a sailing life, at 68 and you have relieved my doubts about age. As for Coppercoat check out the vlog from Sailing Britican dated 18 Dec 2019. Cheers
Good for you Gayland. I am just one year older than you and see no reason to slow down. In fact, the clock is ticking louder so we have to move even faster to get through some adventures while we can. I got permission from Britican to use some clips from their latest video, in this video. I gave them credit with a label in each clip plus a "thank you" at the end. Part of their experience was motivation for me to make this video. No one could say just where the Britican applicators went wrong. I think it would be valuable information if we could figure that out.
Congratulations, Gayland!
I'm 63 and still pursuing this dream. Fair winds.
Boat's looking great!...that cat looks a real personality 👍
Thank you. Young Coati is a great boat kitten, very friendly. His feet are like snow shoes so he still has some growing to do....but we hope not too much more. There are some big cats here in Africa.
Patrick, whatare those brackets on the rudder at 14:50.?
That is an old steel boat that seldom gets worked on. That bracket holds the lower end of the rudder shaft to the skeg.
Patrick thanks for the explanation....
Job well done. Congrats on getting back in the water! Looking forward to the long-term review. ~sv Keeldragger/v40 #278
Yes...we are looking forward to seeing how Coppercoat works or doesn’t work :) Patrick thinks it’s should still be successful, so we will see.
What's your opinion about ultrasound antifouling devices? Do you know how they compare to copper coat? Does it make sense to combine the two (or maybe ultrasound at least switched on when the boat is stationary in a harbour(?)) or would it be overkill?.
I don’t really know to be honest with you. We considered trying it a few years ago but had to be installed professionally...in Australia...and didn’t want to go to Australia. So at that point we just applied some more noneffective antifouling that didn’t even last 2 years and required lots of aggressive scrubbing of the hull. If this doesn’t work, that could be our next attempt. But energy is always a concern on a small boat with a small battery bank, so I’m not sure ...but like you said...maybe when in a marina switch it on. I’m not sure how it would enhance or detract with Coppercoat. Thanks for putting it on my radar again. I love researching and considering things like this!! But hoping this Coppercoat application does the trick once and for all! -Rebecca
We explored ultrasound and no company came back with adequate verification that their system works. Plus, it would take far too much electricity to keep the ultrasound functioning 24 hours a day. Charlie Doane, at SAIL magazine tried it on his own boat and from what I recall, it was not a huge success, but best to check with him. Charlie also has a blog site at wavetrain.net . You can contact him there and probably read his take on ultrasound.
Coppercoat Antifouling is a no go! Their marketing is very good, the product, not so good. Spoken to a few boat owners, some of them will say run! I hope it works out for you.
Thanks for the comment. Now after 4 months we see how it’s working. It is working unbelievable great! I personally am pretty surprised. But there is NO growth at the waterline to this day, and when Patrick dove a few weeks ago to wipe off the bottom of slime, he filmed our neighbors boat, as well as ours. Nothing short of a miracle! Slime but not growth that needed anything more than a wipe with a soft sponge. The other boat that had what was considered the top of the line traditional antifouling at the same yard, launched 2 weeks after us, had so much growth the owner wanted to cry....and it was NOT easy to get it off at all. He had a 5 inch beard at his waterline and barnacles and tough to remove growth...Patrick is making a video about the Coppercoat and the Propspeed results right now...make sure to subscribe to see it yourself in a week or two! We have met happy Coppercoat owners all over the world now...it’s definitely NOT just marketing! But there have been some pretty crappy applications of it, and it MUST be applied properly. There IS room for error on some things, but in general...it MUST be done properly!!!-Rebecca
Just wait! Look out for bubbles in the water line or just below the waterline. One of the biggest yacht service yard in the UK stopped recommending and working with them due to that. The product sounds good, it might work in some regions, but it will never be applied to my vessel.
@@MogleCorp I am very interested in this. What causes the bubbles? Are they big bubbles, little bubbles, many, a few. There is a lot you are not saying which would be very important information.
@@RVLifeNOW I would file this under "I know a guy". I think you are right, goof up the application and ya it will not work. Do it right and you're fine. Certainly keeping the copper in suspension is key, getting it flat and smooth and sanding completely are important. Unfortunately very fussy and time consuming requirements and for the slap it on ablative guys never going to happen. .
I love the concept. Been watching it for years on message boards. My opinion right now is there are just too many 'gotcha's' in the application process. There are just too many ways one can make it so the product doesn't work. It would be nice if Coppercoat or a competitor modified the formulation so that it was far easier to apply with a greater certainty of success.
I think they just need better instructions with better explanations.
hi guys the application looks good, i look forward to seeing how it turns out over time and what results you've achieved, by the looks they'll be good ones, :), its the system ill be using and will be applying it very close to the way you've don it, it is very similar to doing zinc coatings , continuous steering while applying , is the trick, keep things in suspension give an even coating,
well done, and brick house is looking sharp . :)
About the stirring, I would not have known this if I was only watching someone apply the Coppercoat. It is good to get hands on experience with all boat projects.
Hello how are you?
I wanted to know how the coopercoat you applied 2 years ago has gone.
would you apply it again?
After 2 years, what results have you obtained? Are you happy?
Thank you very much and good winds
Hello Pablo. it’s been 2.5 years now, and while it doesn’t stop growth here in nutrient rich waters of the Caribbean, it’s easy enough to o clean still. Perfectly effortless to clean no..but easy enough. I would never paint over it. We clean it once every month or month and a half and it is good to go. I see cleaner bottoms around here, 3-6 months after someone has applied expensive bottom paint and I often wish I could have a perfectly clean, never need to be cleaned bottom…that doesn’t happen, but the divers are always done in an hour and they say it’s so nice and easy to clean compared to other boats. When I get in the water and clean it seems like a lot of work..but I’m a woos. This is Rebecca speaking by the way…the wife, in case you aren’t aware :) Anyways…I would,put it on again…but the beauty is,mi won’t have to for 10 or 15 years…it comes out way way cheaper in the end. But there is no perfect pain that just keeps all the growth away. It MUST be maintained. Coppercoat isn’t designed to ZTOP growth,mits designed to make it easy to wipe it off..and it’s definitely easier to wipe it off than other paint once things start to grow.
@@RVLifeNOW Muchas gracias por la respuesta. voy a estudiar precios y donde pedirlo....
un abrazo
40ft Steel Jazza Joton Guardian. I hope you have found a worthwhile solution.
Thanks, we do too. We had Jotun brand but a different name..Jotun Seaforce, last time and it didn’t last 3 months. We sure do hope the Coppercoat will be better than that! When you find an antifouling you are happy with, you just have to stick with it, whether is be Coppercoat antifouling or anything else! -Rebecca
Did Coati get to roam free while you were on the hard? How do you accommodate him/her during passages?
Hi Robert. Believe it or not, Coati is but 6 months old...we got him here...weight 8.5 pounds already. They must grow them big in Africa..the vet says he will be double that as a thin adult!
He roams just the inside and docks of the boat both on land and on the boat, so far. I had him fixed at just under 6 months to make it an easy operation AND to cut down on roaming tendency. He didn’t even get to participate in the application of the antifouling! So far, we can be on the dock right next to the boat and he has no interest to get off, though I suppose with time the inevitable will happen. Every kitty mommas biggest fear...will he be a smart roamer.
We had a cat before this one...seen in some of the videos...who was about 7 1/2 years old. She was diagnosed with cancer about 2 years ago...and was suppose to only make it another year, though she made it 2. We had to put her down about 3 months ago. We got Coati at 3 months old, pretty soon thereafter because we were so lonely.
We haven’t sailed with him. Poor things first passage will be around Cape of Good Hope. The engine doesn’t bother him, and he did well when the boat was put in the water and was rocking and rolling. Hopefully the sails snapping and the boat heeling won’t bother him much more. Just like Lily my old cat, he looks up at me to know if everything is OK...so I will just have to have a face of steel for this passage.
During passages with Lily, when it was calm, she knew it was OK to go on deck. During rough passages (she could just look at the water going by the boat and the motion of the boat), and she would know to just stay in the cockpit. When it was really really rough she didn’t even come up to the cockpit. She curled up in a tight space somewhere and went to sleep. There were times I’d have to steady her in her litter box so she could do her business. She barfed once in the first passage before we were even out of the channel, but then never again. I hope Coati can be the boat cat Lily once was! -Rebecca
@@RVLifeNOW Grew up with a siamese. I have a similar trait. Don't worry about stuff you can't do anything about.
Yes. We won’t worry about the Coppercoat...it will either work or not work. It can’t be worse than traditional antifouling. But Coati...we will worry about Coati for sure. Now we have her locked in at night since there is an Orange Boy who wants to tell our little boy that this is HIS territory...so he’s been coming on the boat at night to make his point clear. So not worrying about the success or failure of our Coppercoat right now! -Rebecca
I wonder why at 3:10 the epoxy coatings were left to dry, sanded by two methodes and cleaned, de-dusted and water-washed. Why didn't you start the application of coppercoat once the last coat of epoxy (at 3:10) had reached the end of its potlife and was still sticky, not completely dried ? Succesive layers of epoxy should always be applied in each other, not on top of each other. This can be done, of course, but then the sanding is necessary but should be avoided.
I think it is the right moment to start the application process. After that, keep applying it until the desired number of coatings are reached (can be up to 10 coatings). Or else, divide the boat into let's say two or thee zones. De first zone is treated until 10 coatings have been reached, then go to the next zone etc... One zone a a time, keep working until finished. It is very important to start the process and finish it in one long haul, so no stopping in between. It is a good thing to keep one person occupied with mixing and distributing the coating.
The finished product is very lightly sanded, pref by hand, as to expose as many copper particles as possible.
You also mentioned that coppercoat is water bases, which is not true, of course.
You should be good for the next 10 years, which is a good thought knowing that it would have costed you +/- 120 euro's per m² now.
Thanks for the insight. It would have been too hard to organize going right in to Coppercoat application at the end of epoxy..there were a lot of fine details to pay attention to at end of epoxy. Coppercoat is indeed water based…you clean up with soap and water…and of course if it rains hard…it’s all washed off the hull.
One more question I would like to add.Of you previous antifouling paints. Which one was the best one?
None worked very best. Though one we got an expired one from a job we had at a a military base in the Pacific...labelled “International 640” worked better...for 2 full years before it completely failed.. But then we bought the same exact kind the next time and it didn’t work for even 6 months. Maybe the military had laced it with something. We really hate bottom paint...it’s the worst thing about being out here having to haul out every year or two to replace bottom paint that we spent a thousand bucks on minimum to put on. We are praying that this $2000 outlay will last 10-15 years and make it so we just have to do the monthly scrubs and maybe a pressure wash every year or two. Even if we have to patch a few areas after a year because the Coppercoat application itself wasn’t perfect on some select spot..we are praying to not have this hassle every few years with antifouling paint. Fingers crossed! Rebecca
@@RVLifeNOW Thanks! excellent video and great advice. I never really knew the difference between denatured alcohol and rubbing alcohol.Will watch all of your videos.
Thanks for watching! A little update. 6 weeks and just slime except in the one place that it was too hard to apply the Coppercoat. That little 2 inch if that area has barnacles! The rest, just a thin layer of slime that comes off the Coppercoat just as easily as the slime on the Propspeed did! Yeah! -Rebecca
natural mohair has natural oils in it. hence the lack of full compatibility. synthetic for water base products is the safe way to go.
Exactly what Patrick surmised. Coppercoat should put that in the instructions....South Africa quite proud that they use “genuine mohair” on their rollers, and it’s what the boatyard recommended to use...who had applied Coppercoat in the past with it. But we were not excited about it, for the same reason you mention, so hence why we decided to use the smaller foam rollers to apply the Coppercoat. -Rebecca
Anyone. How often does a boat require painting with the consideration that it is always done clean and proper? Also could you apply plastic sheeting to the hull?
Depends on the quality of the paint used, how well and thick it’s applied, where you cruise and what hits you or what you hit...and how pretty you like it to be! We paint ours about every 10 years or so. Twenty year old boats we know well have never repainted. -Rebecca
No experience with coppercoat . I am only learning glassfibre application now.
Coppercoat is working well on AV Brick House.
I think you get it right there with water and alcohol cleansing, since indeed acetone is leaving a residue film afterward, and only water will not remove, but alcohol does. Since I have been working in the semiconductor industry to clean semiconductor wafers before processing, that is a susceptible process. Cheers.
Thanks for the feedback.
🙏Rest In Peace 🙏
Yes
First i would appologise, becouse my question will not be about coopercoat. Very expensive here so i never thought about it. U know so much about boat repaires, i would like your thought on painting a fiberglass repair and general painting the deck. Should i use gelcoat on a small fiberglass repair 20inch or a two part paint? And for the deck, it's really old pretty rough original with build antiskid, can i just degrease it and paint over it with 2part paint used for top sides or should i use primer first. It's lightly used, do u think i could get away with a thin layer of 2part paint on a non skid sections (in pretty good condition, still lots of profile left) or will i just even the whole thing? Thank u very much for your replay.
Thanks for your vote of confidence but I don't know as much as the pros who do this work every day in all sorts of scenarios. If I had a newer boat with unpainted decks, I would stay use gelcoat to try to match the existing. Since ours is a very old boat with decks that have been painted, I use two part paint for a finish coat. All new fiberglass is first primed with a two part primer. Since your other area to be finished ia "really old pretty rough original with build antiskid," I would think there should be enough tooth to hold a new coat of two part paint after first completely cleaning the area free of all dirt, grease and contaminants and wiping well with acetone. In the smoother areas, you would certainly want to first sand with 320 grit paper. It is really hard to say for certain without seeing it for myself. If you really want to be certain of success, it is always best to first use a two part primer. Not all the questions have to be about Coppercoat ;)
@@RVLifeNOW, thank you very much for the bother. Boat is anything but new. It's an '68 amel alisio. I will get hold of some good primer and give it a try. It looks pretty awfull now and i would really love to give the old girl some much deserved love. Thx again and may the sea treat u kindly.
Thanks for your question. If you watch the video about our deck repair on the bow...and read the comments, many comments may give you some ideas too. -Rebecca
Klemen, please consider All topcoats and Finish coats to be transparent. Whatever you see before the finish coat, you will definitely see after the finish coat. And the solution is not another finish coat (or two, or three) if you see blotchy stuff through the first finish coat. That's the value of Always using a primer either white, or tinted a compatible color. After you paint the finish coat, you will see "one" color, not several shades. After the first finish coat, wait 3 weeks, don't try to "even out" the differences in different areas. Time will even out light or dark spots quite effectively.
Yes, you can just degrease it, scrub it well and remove all the residue of the cleaners.
It is easy to paint away a non-skid pattern. That is, to change the non-skid into something slippery. Make your coats thin, not thick, to minimise this effect.
If you are not a professional refinisher, I strongly believe you will always see more satisfactory results painting, rather than gel coating. The paint Does Not have to be two pot. Two pot paints will always be more transparent than one part finish paint. Two pot paints can be very difficult to sand. Yes, they're longer lasting, but there's a price to pay.
If you are hiring a professional to do your deck, do exactly what they recommend. Then it's their problem to deliver.
Thank You
@@martyspargur5281, i have a primer to go with my 2part paint i just have to see what thinner i can use. I don't want to cover my non skid, since it's really good. Thx for the tip. I will paint it with 2part since i already got it. I think it will not look worse then it does now.
When applied correctly I have found the only downside is the frequent scrubbing.
Ha..if that’s all we have to do to this antifouling, that will be fantastic. We have to do that to every kind of antifouling we have ever had anyways. One guy here tells us he never ever touches it, just hauls it out and pressure washes it once a year. That would be nice, but that sounds too good to be true! -Rebecca
Have you found it any more frequent than with traditional antifouling? I would hope less. And were you able to do the final sanding with the recommended 320 grip paper to look like the picture in the instructions?
Very worthwhile video. Why manufacturers don't provide this remains a mystery to me. Subscribing to follow results. Fair winds and gentle seas.
Willy Wonka...what a great name ;) Thanks for subscribing...We hope you will enjoy some of our other do it yourself videos too! -Rebecca
These days things are built to not last long so you will go out and buy a new one when the old one gives you problems.
I did a 40 foot boat in Ontario, Cost $38,000.00 to move to Florida. Worms in the teak were a problem.
Wow..that’s horrible..maybe worst than hull blisters or bottom painting jobs! we have seen an old fiberglass boat, built in Taiwan, that had teak eaten up by termites. -Rebecca
Too late now, but, you could have sprayed the CC on. I'm guessing that tools for the job may not have been readily available.
Have you done any airless spraying? I have done a lot of airless spraying and can see, it is far safer to just roll the stuff on. It would take a well coordinated effort to spray and would be nice to have that fine, smooth, finish. Coppercoat does train professional applicators on how to spray Coppercoat.
I had copper coat but after a few months it was full of barnscles and calcium worms in the Mediterranean.
I cleaned, scratched and sanded the fuselage any four weeks but in vain.
We applied very carefully according to the manual with three people.
Nevertheless I exchsnged the voating with International WA which is now after 2 years still clear of anything. And it seems to last even one more year.
Never more copper coat!!!
Sorry it didn’t work out for you. It’s approaching two years for us, and though we scrub harder each month, it’s still coming off quite easily.
What do I want to see? Cape Town and more Hout Bay, Table Montain, ... just keep on going 😊. My home town. (I live in the UK now..)
The S. African coast will be fun to show. But first I have all this video of fixing this boat to put together. I just made a strong pole to attach the under water GroPro to, so maybe I can get some underwater video of the Penguins swimming in front of the bow, rather than dolphins. Also, if the weather allows, I want to get in close to Cape Agulhas for some ocean side video....Cape Hope as well. We will see.
Patrick Childress Sailing the penguins would be a plus but the most I have seen are at Boulders beach south of Simons Town and that would be close inshore. I’m no expert 😊
Better for you to film penguins in calm waters of Cape Aghullas, ,than storms at Cape Aghullas, thank you very much! -Rebecca
I have Coppercoat on my Rival which was professionally applied a few years ago for a previous owner. I touched up a few spots last year but other than that it has morphed great, even when there is some weeks or slime growth it comes off real easy. Hope yours works well..Andy UK
Thanks, Andy. So far, after 7 weeks sitting at a dock in this very nutrient rich estuary, our Coppercoat is doing what it is supposed to.
Great. I was on my boat at weekend. Moored Chichester Harbour and has been in since May 2019. No weed on waterline and minor slime on hull. Rudder has some longer weed but not much really and all easy to scrub off. If it was warmer I would get in to do it. Andy UK
Andy UK - SY Corrival - Rival 32 Xcellent..thanks for the update. We have a post on the short term details of our now after 7 weeks on Coppercoat. I know...too short to tell, but antifouling for us actually fails pretty quickly...so we were curious to see what direction this was going. It will be on the blog in a few hours. -Rebecca
This seems a real chore. May i ask how much the materials cost for this job?
The Coppercoat was $1750 (11 kits) , and the rollers, brushes, bucket, acetone other were under $100. The labor for the day of prep, application then , sanding 3 days later was about $300 but remember we are in a lower cost area for application. Of course the preparation for our hull with all the blister repair, fairing sanding, etc, irregardless of a Coppercoat application, was months of work, and probably $2000 in labor and lot of materials were used. -Rebecca
That's cheap. At least compared to a California bottom job !
Well remember we are NOT paying professionals to apply it. This is just for the Coppercoat paint itself, the rollers, and buckets. Isn’t bottompaint in the USA about $250 a gallon...and we would need 5 -6 gallons. It’s cheaper in other parts of the world...and more in others. Coppercoat hence is about 50% higher talking materials costs only. Then the rest depends on if you hire the “pros”, or do it yourself with your teenage kids like SV Totem did, or with some other cruisers you round up, or other. I can imagine to hire pros in California to prep and/or to apply Coppercoat, or any antifouling paint for that matter, would be astronomical! Maybe best to load up on Coppercoat material before leaving the US, and sailing to Cartagena Columbia, or some other location with cheaper labor costs...or just diy. It’s very very possible to apply Coppercoat yourself. Just read and follow the directions, ask a lot of questions where it isn’t clear, watch videos, and read blogs about proper Coppercoat application. -Rebecca
@@RVLifeNOW thank you so much for responding. Wow now i see the picture. Forgive me if i missed it, but how long does this coppercoat last?
william avery If we applied the Coppercoat properly, it will last 10 years...15 years...we met a happy boat owner in Richards Bay, South Africa that has had it for 15 years, and still has no plans to do anything again any time soon. Would that not be heaven to not have to apply antifouling for more than 15 years!!! Fingers crossed! -Rebecca
Very informative thank you..plain sailing captain
Good Luck! With all of the environmental well meaning regulations there are unintended consequences. Like boat hulls need to be re-sanded, painted frequently (resulting in more product and painting supplies used) and scrubbed sometimes monthly. The new stuff doesn't work nearly as well as the old "red lead" antifouling paint we used in the 60's and 70's. The US Government and military continued to use the "good stuff" when us U.S. taxpayers had to switch.
You have a very good point. A lot more of the weak stuff falling off boats equals the same as less of the good stuff.
If the copper is encapsulated in epoxy, I don't see how the copper is going to keep marine growth from forming on the hull.
After application, that is why it is necessary to sand the surface to expose the copper.
The epoxy resin very slowly erodes exposing the copper which is anti-growth. It becomes green as the copper oxidises and that is slowly eaten away exposing the resin to be eroded and so on. Coppercoat say it lasts for 10 years but frequently it last well longer than this. I saw a boat with a bright green copper coated hull after 18 years. It only needs burnishing after the application, not again.
Enjoyed the video
Thanks for watching and your nice comment.
? spray with airless sprayer ? It comes in a spray can but would be very expensive that way
I have never seen Coppercoat, like we used, in a spray can. Where is it available?
@@RVLifeNOW I dont know what kind you used but the kind I am talking about is used on engines to seal head gaskets here is a link there are different brands of similar productetc.www.amazon.com/gp/product/B000M8NZ8E/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
@@teekay1785 This is a grease with some copper content. No resin in this. Shade tree trick is to use silver paint in a rattle can
@@delukxy Without looking I dont think it is a grease more like a high temp silicone gasket adhesive . It is very tacky. The point is mainly that it is sprayable with a fairly high cooper content leading to believe one may be able to spray on the boat product as well with airless sprayer and less likely a standard sprayer but this is just conjecture since its a different product.
Coppercoat's extremely specific but unexplained instruction quirks almost seem like they are creating reasons for claiming their failures are application errors. We do a lot more horror stories than praise.
It is surprising their instructions are rather thin. Hopefully this video will help out Coppercoat and anyone thinking about applying Coppercoat. We do find manufacturers instructions to not always be correct. We like our Kiwiprop but the manufacturers instructions are that you don't have to prime the Zytel blade prior to applying antifouling. From experience, I found that to not be correct. We now always prime those blades when using traditional antifouling. Now I follow the Propspeed directions for metal when treating the plastic blades and put them through the same etching primer process, with good results. Some of these manufacturers need to listen more to users in the field.
Finally - fair winds.
Yes. Finally is right! It’s hard to believe we have already been sitting at this dock after our haulout, for nearly 7 weeks. Patrick is gonna jump in this murky water this weekend and have a feel around (since it’s impossible to see in this water) and see if he can get a peak at how the Coppercoat is doing!-Rebecca
Yes, it has been a long haul here in the boat yard. Next weather window we will be off to Cape Town.....but Rebecca has lined up even more boat work for me..lithium batteries. The work never ends.