How to Remove BMW Wheel Locks WITHOUT A KEY
Вставка
- Опубліковано 15 сер 2018
- 21mm 12 point socket: amzn.to/2MT0IfM (might get damaged in the process)
BMW wheel locks are a great way to protect your expensive wheel and tire investment. They are you best friend when it comes to stumping novice wheel thieves, but quickly become your worst enemy if they ever break and you need to remove them without a key. In this video, I show you how to remove BMW wheel locks in case your lock ever becomes too damaged for the key to work. I want to give a huge shoutout to everyone who gave me suggestions, and of course, my dad and my neighbor who came through with the brute strength.
I don’t want anyone to use this information with bad intentions. FYI, this took about a half hour for one lock and the whole neighborhood could hear us. You probably won’t want to steal a wheel with this method.
MY WHEELS
Front:
VMR V801 19x8.5 ET35
Continental ExtremeContact DWS06 235/35/19
Rear:
VMR V801 19x9.5 ET35
Continental ExtremeContact DWS06 265/30/19
UA-cam CAMERA GEAR
▶kit.com/JUSTINBUICE/youtube-v...
CAR CARE PRODUCTS
▶kit.com/JUSTINBUICE/car-care-...
#BMW #E90
Music licensed through Epidemic Sound
Follow Me:
▶Instagram - @justinbuice
This description may contain affiliate links. If you click my custom link to purchase a product, I will earn a small commission (around 4%). These commissions are appreciated and help me make better content! - Авто та транспорт
Fun to watch! Glad you filmed this! Was nervous for the wheels and camera the whole way!
I will be trying this, thank you, have watched 3 videos on this technique and you had the most trouble, the others were done in less than a minute, makes me think the wheel lock was already loose. x fingers for me.
Way to go Dad!!! Glad you got it off and that your dad didn't hurt him self when the lug wrench came loose.
I used the same method thanks to you to remove one my lock that was stuck on my BMW X1....worked perfectly! Thanks
Thank you so much for this video and solution! Stripped one key on the third wheel, bought two new ones and got that third wheel off, then stripped both new ones in the fourth. What pieces of crap! Had a 21mm 6 point and 22mm 12 point, neither worked. Bought the 21mm 12 point and had the sucker off in 1 minute. Thanks again!!
Huge thank you! I never would have thought of this method. I have a 2003 E46, and used 22mm. Worked! Now onto brake job.
^
Thank you for the video... I just experienced the same worry.. I did what the video advised, lo and behold! It worked!!!!
Many thank you to you for uploading 🙏
Wait, wait, wait... did the police come????? Lol
My neighbor lol
🤣😂 I was WHATTTTTT!
Damn Justin doesn't play... He called the Police on that little lug, then beat the crap out of it.
👮♂️🔨
I love that your parents neighbors came to help 😂
Justin, my man! Big thanks to you and your old man. 💯 Just got through bangin a 21mm to get my lug off. Love the videos, drive safe and keep up the good work. 👍
Thanks to this video, I have been able to remove locks without the key. With that being said, I have 6 sets of rims for sale ya'll. :D
i got the same problems in mi E90. Thanks for your videos and your help Justin
GOOD JOB everyone! Beautiful VMR's unscathed. My son and I torque the VMR's on his E46 to 88 ft. lbs. !!!!! Best practice when removing wheels, Lock off first, back on last.
Lots of thanks from Zimbabwe. Was stressing over this
Fantastic work guys 👍🏻👍🏻
Worked like a charm! Thanks for the video!
I don't have wheel locks (yet) but I'm grateful for this info. Always good to see father and son working together!
Kkknkkkkk kkkkkkkkkkkkk k kkknkkkkkkkkkkk kkkkkkkkkkk kk kokkkkkkkkkkkkkkkkkkkkkkkkkkkknnkkknnkkkk okkknnkkkkkkkkkkkkkkkk kkkkkkkkkkkkkkkk k kkkkkk. Kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkn njkkkkkkkkkkkk kkkk kkkkkkkkkkkkk kkkkkkkkkkkkkkkkkkkokkkkkkkk 😊😊😊😊 kkp
Those wheels are sick👍🏽
Worked like a champ!! Thank you.
Awesome! Glad to see it worked out for ya!
I've tired every method without any luck. I took it to a reliable auto mechanic. Thus far they are working on removing it.
Thanks
22mm worked like magic
Nice work dude 👍
Your A G brother good family, Euro Videos 👍👌 I got a E90 335D your videos are very motivational and inspiring god bless
Removal method worked perfectly, thank you
Glad I could help!
Worked perfectly. Thanks
Thank you. It worked perfectly.
This video was very helpful. I had same bolt. I used 22mm socket, 21mm was to small. Thanks man💪😌
Which series BMW ? E70?
“What superhuman put this on?” Lolll
A normal human with an impact wrench.
Love the feature from the community dope editing.
Thanks man!
This video just saved me. Thanks bro
Sweet! A good idea to try of We get stuck.
You should also use an impact socket as these chrome ones shatter. Shorts also happen to be better since they won't hit your wheel. I would use a strong impact extension too to take the hammering
Almost 100k keep it up
But 2:19 was funny
Woo! Glad you got it off
such a relief lol
This works on some locking wheel nuts but many of them have a ring on the outside that just spins so you can't do this.
It's not everyday a Cop will take off his jacket to help you!...Cool Video man!
nice vid mate.. thanks alot
Dude. You just saved me $55 for a new wheel lock key from BMW. Took wheels off to paint rusted rotor hubs and replace VMR caps with BMW caps and got down to the last wheel and the key broke. I know what I'm doing after work tomorrow!
I was 🙏 for your wheel happy that sledgehammer worked. We use the same technique at the shop but, with a handheld sledge. Please go to harborfreight and buy a breaker bar my ocd goes bananas when people don't use them.. happy its off and your wheel in safe👍
I have a breaker bar now 😎
Thanks! This helped me steal a lot of wheels!
Hopefully nobody notices you with a sledge hammer beating on a wheel lol
@@justinbuice 😂😂😂
Kinetic energy always wins.. Did it once with a stripped out #45 torx.. hammered a #50 in and out came the bolt.
Your Car just keeps looking nicer and nicer. Btw whats the name of the outro song?
I Tried it on BMW 330! using a 21mm, and it worked without issues. Now I didn’t use a slash hammer, I used a regular hammer.
I recommend adding a breaker bar to your tool box. Ratchet with a pipe (cheater bar) will only work so long until the ratchet breaks. If that happens, you are SOL on finishing the job unless you have a spare.
Just bought one a few weeks ago. So much better!
This might be a dumb question but are u able to put a non keyless lug nut back on the key one?
Tip: always use painters blue tap on all sockets used to put on or remove sockets. To prevent scratching wheels
Wow, I learned something today🔥
The first thing I do whenever I get a new car is to dispose of the wheel locks. They are more trouble then they are worth. Most people don't need them unless they are living in Compton or the Bronx.
Not all bmw . bmw lock has spinning ring even when you put socket it will spin the ring this works with solid wheel lock
Dude replace OEM BMW wheel hub with after market with studs on it! More content please
Glad you got it off, I also sent you a message on your Facebook page about my 328i having a cold start misfire. Can you help?
very nice car bro
Superb..
Would you buy a 2nd hand car, that has frostiness, under cap of the radiator, oil well. And what would you do if you saw, water in the driver's side in the engine? Shaun of NYC
Great video brother, I had a different problem at one point in my life I was stuck with that problem for almost 6 hours and my old man never left my side he was here to shear me up until the en of that problem, he’s now shearing up our great master our beloved Jesus Christ, he went on a journey that some day we will all go. thanks brother great video!!
Does this apply to the OEM BMW high security locks?
You ever thought about getting a zed four? Just curious
Glad you got your wheel off.
Thanks man I just did it
Glad I could help!
@@justinbuice You're video save me about $150 And thank you so much again
I have the same problem today with my Audi A3, funny was it's was the last wheel as well
nice officer
always use 1/2" drive sockets breaker bar and some muscle takes it off
Is the rim damaged !? 😭😭
I have the same problem now... I was in the middle of changing out my rear brakes and was on the last bolt when I realized it’s rounded off. I first need to buy a bolt from BMW before attempting a smaller size socket. Fml.
I'm glad you got it off. If you had AAA they carry an easy out that would have taken it right off. It looks like a socket but inside it has reverse splines. Get yourself a AAA membership and don't get stuck anymore.
Im going to look into that. They are offered as an add on through my insurance but I never thought I’d need them
One day you will. Also like Jason said. Get a breaker bar and a 19 socket. Harborfreight has a 1/2 inch for $9.99 on their add. Make sure you push the socket forward when you go to take it off. Take care!
Could this method damage the car in any way?
3/8 socket wrench usually pretty hard to get em off lol
Guy: what super human put this on?
Lug: that super human happens to be a super air gun
I'm a bit late to the party dude, but BMW have keys to them all 😂😂😂 I was watching this and then went to BMW and they gave me the key for $20
What is the key called? I need to order one, when i bought my car it wasnt with the tools. Have a flat and cant remove tire
I have a question. So I put my old wheels on my bmw e39, and they are stuck. I remove all the log nuts (sorry for spelling I’m foreigner) and the wheel won’t come off. I hit it multiple times and still it won’t come off. Any ideas?
Turn in lugs 6-7 times drive back and forth 4-5 feet. Till wheel breaks common bmw problem out white lithium greese on the hub and the rim when changing tires
I think that socket method with an impact screwdriver socket would have had that off in a few smacks of the hammer.
mine was removed in 2 seconds, the lock was burnt red-hot on one side to make a slit and hammered a flat head on that dent to loosen the wheel lock
hey Justin would you recommend the VMR wheels for pothole ridden roads
Yeah mine survived in MI. I would strongly recommend 18's with a thicker tire rather than 19's though
You know what???? After seeing this video i have ordered 5 Right size socket for my selff so i dont need to see this situation even i loss 2-3 sockets hahahahahaahah as i dont have sludge hammer and may cost equal to 2-3 sockets costs.. but hey.. thanks mmmate.. i enjoyed.. it honestly..
@Justin Buice does that technique of removing the locknut damage the locknut by any chance and in anyway? I'm stuck in Lockdown and want to change out my Brake Pads.
You will have to replace the locking bolt if you manage to get it out
@@justinbuice thanks for your help mate!
How do you like those Continental tires???
Is that your first set???
I love them. I have all season Continentals on this car and Continental summer performance tires on my wife’s FR-S
I need you guys lol
👍
The cops 👮♀️ ????? Now that’s really calling the heavy artillery. You weren’t kidding!!!
that metal pipe comes in handy. i have one just to loosen my tire nuts.
fondoo my dude,tire nuts? Really?
wheel nuts. it was getting late and i should really be sleeping instead of watching these videos on youtube
Torque on the wheels is 80 ft-lbs. Looks more like 120 😬
This just happened to me
Next time save yourself the trouble get yourself some easy outs and a breaker bar a bigger breaker bar would give you more leverage you can get everything at advance auto ✌🏿
Been trynna know what the outro song is for so long any ideas? Haha
Could of gotten a nut extractor kit
NEVER ask 'The Terminator' to tighten up your Wheelnuts!
2:55 *OUCH*
Now my turn
Do all tires come with one lock each?
On cars with locking wheel lugs, there is usually one lock per wheel
Justin Buice thanks very helpful videos, keep it coming
It's easier to use 6-point 21.mm socket. Just grind simple v-shape the between the points, it will be a lot easier to knock the modified socket on to bolt and use brake bar to turn it.
Omg what you are tools use.
Even the police were rushed to scene of the broken nut...
LOL
rip rim
wow only 471 views so far im so early
I was in the video....
BMW
Someone send this to Valterri Bottas
With the "new" version of the BMW wheel locks this method doesn't work! ;-)