Between cartridges, mag pouches, rig anchors and everything else, probably a few dozen. Cartridge loops are pretty much small (22) medium (pistol/rifle) and large caliber (shotgun). The actual cartridges determine a lot of the final size. Maybe 5-10 cartridge loops templates.
For the belt portion, I use regular Veg Tan, the same 8/9oz I use for holsters. For the loops, I use a lighter weight latigo leather that I usually get at a local muzzle loading shop. Actually, I feel the leather and pick out something that seems like it will work well. They are sold in 2-3" x 72" straps, and I'll cut those to width to meet me needs.
I was always taught to use un fired rounds due to fired rounds have swelled some what. do you not have a loose problem with live rounds? Or are these live rounds you have made safe?
With the cartridges, the biggest loose/tight would be the size of the wearer, moreso than the nominal circumference of the casings. Live rounds are pretty expensive and I leave the empty casings at delivery. The leather tends to shrink up, slightly, as it's left empty, as well.
How do you keep your bullet loops tight after usage. I've had one for my 30-30 butt stock. The holes are getting loose, and the bullets fall out. Is there a way to tighten them again?
When I build the loops, they are tight on a short radius. Sometimes, they look kind of like a snake coiling around my hands as I'm building the belt. When I put the backing on, it lays better. As the belt is stretched to a normal, "wearing" radius, they should stay snug. If anything, I expect them to be more for show, and not particularly fast to remove the rounds. I guess that's a long way to say build them tighter. CAVEAT - I have never done it, but I have heard of guys using liquid calcium to tighten leather. Use it sparingly, as a little bit will shrink leather, A LOT .... or so I'm told
I just purchased a fast draw rig for my bb/pellet revolvers. Problem is the cartridges are slightly too big to fit it. Its made from buffalo so i was wondering if the loops will stretch enough to fit them without ripping.
It probably depends on the construction. Slot cuts like mine, here, loosen when you bend around a tighter radius. Stitched loops tend to loosen when you bend them inverted to the natural bend of the belt. Buffalo isn't very absorbent, so even moisture may not help. Keep in mind, cartridges IN the loops are often more for show. Many craftsmen will even insert inert rounds as part of the rig. I send then out with the empty cases.
"For the loops, I use a lighter weight latigo leather that I usually get at a local muzzle loading shop. Actually, I feel the leather and pick out something that seems like it will work well. They are sold in 2-3" x 72" straps, and I'll cut those to width to meet me needs." I would guess they are in the 4-5oz. range.
Most loops are about 3/4". If they stack to close, the belt won't straighten out, and your rounds are stuck. 22s are closer, and I have a separate jig for those.
Great video and explanation
Great video very informative, another Subscriber 🤙🙌👋
Great video, I like how you describe the method of adding an additional strap, very smart, thank you.
Well done!
Loved video how about more videos.
Coming soon, I hope! I'm working on a video for homemade/specially made tools, etc. Any requests?
I like your channel, looking forward to more videos👍🏼
Great video. I always wondered about the process of looping bullets on a belt. (BTW, your voice sounds just like John Goodman)
Thank you. great video. I do want to get into holsters and bandolier belts too. You mentioned having multiple templates. How many do you have?
Between cartridges, mag pouches, rig anchors and everything else, probably a few dozen. Cartridge loops are pretty much small (22) medium (pistol/rifle) and large caliber (shotgun). The actual cartridges determine a lot of the final size. Maybe 5-10 cartridge loops templates.
@workadaygunleather3331 thank you for your time.
I was wondering what weight and type of leather ie. Chrome or Veg tan, you're using for the straps? I like the method you used for sure.
For the belt portion, I use regular Veg Tan, the same 8/9oz I use for holsters. For the loops, I use a lighter weight latigo leather that I usually get at a local muzzle loading shop. Actually, I feel the leather and pick out something that seems like it will work well. They are sold in 2-3" x 72" straps, and I'll cut those to width to meet me needs.
@@workadaygunleather3331 Thank You Sir!
I was always taught to use un fired rounds due to fired rounds have swelled some what. do you not have a loose problem with live rounds? Or are these live rounds you have made safe?
With the cartridges, the biggest loose/tight would be the size of the wearer, moreso than the nominal circumference of the casings. Live rounds are pretty expensive and I leave the empty casings at delivery. The leather tends to shrink up, slightly, as it's left empty, as well.
How do you keep your bullet loops tight after usage. I've had one for my 30-30 butt stock. The holes are getting loose, and the bullets fall out. Is there a way to tighten them again?
When I build the loops, they are tight on a short radius. Sometimes, they look kind of like a snake coiling around my hands as I'm building the belt. When I put the backing on, it lays better. As the belt is stretched to a normal, "wearing" radius, they should stay snug. If anything, I expect them to be more for show, and not particularly fast to remove the rounds. I guess that's a long way to say build them tighter.
CAVEAT - I have never done it, but I have heard of guys using liquid calcium to tighten leather. Use it sparingly, as a little bit will shrink leather, A LOT .... or so I'm told
I just purchased a fast draw rig for my bb/pellet revolvers. Problem is the cartridges are slightly too big to fit it. Its made from buffalo so i was wondering if the loops will stretch enough to fit them without ripping.
It probably depends on the construction. Slot cuts like mine, here, loosen when you bend around a tighter radius. Stitched loops tend to loosen when you bend them inverted to the natural bend of the belt. Buffalo isn't very absorbent, so even moisture may not help. Keep in mind, cartridges IN the loops are often more for show. Many craftsmen will even insert inert rounds as part of the rig. I send then out with the empty cases.
Great video. What weight of leather did you use for the loops? I'm planning on making same caliber 45 long but in a bandolier. Thank you in advance.
"For the loops, I use a lighter weight latigo leather that I usually get at a local muzzle loading shop. Actually, I feel the leather and pick out something that seems like it will work well. They are sold in 2-3" x 72" straps, and I'll cut those to width to meet me needs." I would guess they are in the 4-5oz. range.
@workadaygunleather3331 I appreciate your reply. I will have to go through my stock. I really like the one you made, very nice. Thanks again.
Can you tell me what slot punch you're using?
I use a Craftool 3/4" oblong punch. I like the sharply parallel profile. Tandy carries them.
Would you get more if you did twenty two cartridges
@JimmyCasady I don't charge by the loop. In some cases, the loops are included in the base price of the piece.
whats the spacing between your loops
Most loops are about 3/4". If they stack to close, the belt won't straighten out, and your rounds are stuck. 22s are closer, and I have a separate jig for those.
Bom dia