Це відео не доступне.
Перепрошуємо.
VIRUTEX AG98F EDGEBANDER | To Buy Or Not To Buy | BONUS Race Against The Iron | Vid#75
Вставка
- Опубліковано 4 гру 2021
- NEW MEMBERSHIPS NOW AVAILABLE - JOIN TO HELP ME SUPPORT THE CHANNEL AND KEEP IT GOING - THANK YOU (Great perks included)
/ @thelondoncraftsmanwor...
Hello and welcone to The London Craftsman Channel !
I assemble and learn to use the VIRUTEX AG98F EDGEBANDER.
I also compare and time the difference in a battle between this EDGE BANDER and the tradition old skool IRON.
Worth a watch if your trying to make up your mind to buy it or not !
I hope you enjoy
Ryan
VIRUTEX EDGEBANDER - amzn.to/3QjvZw7
PAINTABLE EDGING - amzn.to/2ZTIOFm
******************BELOW ARE LINKS TO PRODUCTS BELOW THAT I USE *************************
TOOLS FROM 'BANGGOOD'
www.banggood.com/custlink/GmD... - UPGRADED PARALLEL GUIDES
www.banggood.com/custlink/K3G... - PAIR OF BESSEY COPY WRATCHET CLAMPS
www.banggood.com/custlink/KKv... - DRAWER/DOOR HANDLE JIG
www.banggood.com/custlink/3vv... - DRAWER/DOOR HANDLE JIG
www.banggood.com/custlink/3vK... - ALUMINIUM HINGE JIG
www.banggood.com/custlink/33K... - 200MM CARPENTERS SQUARE
www.banggood.com/custlink/D3K... - 600mm ROOFING/CARPENTER SQAURE
www.banggood.com/custlink/333... - POCKET COMPASS
www.banggood.com/custlink/m3m... - 300MM PRECISION SQUARE
www.banggood.com/custlink/vmK... - 300MM ANGLE T SQUARE
www.banggood.com/custlink/mDG... - ATOMSTACK LASER
www.banggood.com/custlink/KK3... - GUIDE TRACK SAW SQUARE (BUDGET)
www.banggood.com/custlink/mKv... - ADJUSTABLE TRACK SAW SQUARE
WORK SHOP TOOLS & MATERIALS
amzn.to/3mDf84R - NON SLIP MAT
amzn.to/38pDRo9 - KETER FOLDING TABLE
amzn.to/2LVq51Y - MAKITA ROUTER / TRIMMER / PALM - RT0700CX4 ( MUST HAVE!!! )
amzn.to/3cO8C7D - 1/4" FLUTE CUTTER
amzn.to/3cTCYW6 - 1.6MM RADIUS - MICRO ROUND CUTTER FOR 1/4" ROUTER TRIMMER
amzn.to/39Kyezi - HITACHI 2ND FIX BRAD NAILER
amzn.to/2UIB97u - HITACHI 1ST FIX GAS NAILER
amzn.to/2R9z7em - JIGSAW
amzn.to/2V2SGWT - POWER DRILL
amzn.to/2UWDudW - MAKITA BELT SANDER
amzn.to/3dUmyxl - BOSCH CHOP/MITRE SAW
amzn.to/2YOuiK0 - MAKITA BRAD NAILER
amzn.to/2Eo6SSg - PVA GLUE
amzn.to/34pvYem - MITRE FAST
amzn.to/2POJR09 - 35MM HINGE CUTTER
amzn.to/2udA4JU - SIP 10" TABLE SAW
amzn.to/3aq2pgI - 250mm TREND 48T BLADE
amzn.to/2sDwkkL - 3M RE-USABLE DUST MASK
amzn.to/2NEWzyk - KETER FOLDING WORKBENCH (THIS IS A MUST BUY)
amzn.to/30AlVD2 - JOINTING COMPOUND FILLER
amzn.to/2TIkUqK - MAKITA ORBITAL SANDER
amzn.to/2FZe1JI - ORBITAL SANDER SANDING DISCS ASSORTED
amzn.to/2sJ6YBU - 500MM GTV SIDE MOUNTED DRAWER RUNNERS
amzn.to/37fet2y - MECHANICAL PENCILS
amzn.to/36cfo2y - 3MM WOOD AND METAL DRILL BITS
amzn.to/37gjiIL - MASKING TAPE (SKOTCH 25MM)
amzn.to/2RF1wZ4 - STANLEY TAPE MEASURE 8M
amzn.to/30DdW8a - WOOD BRADAWL ( SHARP POINT FOR MARKING HOLES )
amzn.to/37qwNpi - MAKITA COMBI & IMPACT DRILL SET 18V
amzn.to/36h7W66 - STANLEY SCREW DRIVER SET ( STANLEY FATMAX )
amzn.to/2ugisxk - COMBINATION SQUARE 400MM ( BAHCO )
amzn.to/30HwDrg - VINYL / RUBBER GLOVES
amzn.to/30Loxho - P600 SANDPAPER WET AND DRY
SPRAY ROOM TOOLS AND MATERIALS
amzn.to/2O7HDJp - GRACO 695 ULTRAMAX 2 AIRLESS SPRAYER
amzn.to/2LX0Ufw - GRACO 390 PC AIRLESS SPRAYER
amzn.to/34tVFuo - GRACO RAC X GUARD
amzn.to/2PRrrvO - GRACO 110 FINE FINISH LOW PRESSURE TIP
amzn.to/38CPQ0J - GRACO 210 FINE FINISH LOW PRESSURE TIP
amzn.to/2PIMQHC - GRACO 310 FINE FINISH LOW PRESSURE TIP
amzn.to/2spuWSd - GRACO 410 FINE FINISH LOW PRESSURE TIP
amzn.to/36FsKoi - GRACO 510 FINE FINISH LOW PRESSURE TIP
amzn.to/35oNj8v - SPRAY BOOTH TURNTABLE
amzn.to/36819M1 - TACK RAGS
amzn.to/30ADvq9 - SIP SPACE HEATER
amzn.to/2TyIlTz - SPRAY FILTERS ON A ROLL
amzn.to/2uTXapl - TWIN SLOT SHELVING UPRIGHTS
amzn.to/38l76H2 - TWIN SLOT SHELVING BRACKETS 10 PACK (370MM)
amzn.to/2tjUK37 - PIPE INSULATION (TO PROTECT SHELVING BRACKETS)
amzn.to/2TCfBJK - 400MM ADJ SPEED EXTRACTOR FANS
Funny I've been using edge banding tape for years with an iron, but this week I decided to try your fill and sand method for some narrow shelves. Worked out OK I think. Undercoat looks OK. Probably even quicker than the tape and certainly cheaper.
Not many videos on UA-cam for the AG98 so I appreciate the time you've taken to make this one.
Picked up an AG98 today to do some 1mm thick ABS edge banding on melamine.
The iron method doesn't seem to work on the relatively thick ABS as it starts melting the top before it heats the glue on the under side, so I'm really hoping the AG98 solves this by heating the glue directly.
Thanks again for the how-to!
I've not ever tried abs so that will be interesting to know!
Yea hardly any vids on this machine!
I'm glad its helped a little 👍
Hi Ryan
Would appreciate some help;
I purchased the paintable edging you linked in your videos.
Done 3 coats of eggshell and it looks nice but by just by coincidence I noticed if i use my nail and pick on the paint it comes away and the white can be seen.
Is this something you have come across ?
Just concerned overtime the paint is just going to come off ?
I even tried using primer on one of the pieces and it’s the same issue
I've been running one of these for years... It's a super bit of kit..very well made ..I don't think this is designed to do numerous straight runs...more for occasional and curved work...I used it in conjunction with a floor standing machine. It is 100 times better than an iron and opens up many options as you are heating the glue directly not the material. I wouldn't be without mine.
Do you usually paint over the tape? Thanks for the video 👌
Hi Ryan, I like the look of that, lot quicker than an iron. Will wait for the Bangood version at £39.99. 🤣😂
Haha I just had a look and isn't one out yet lol
I will just fix the roll feeder at the end of workbench and iron as I pull from the feeder then cut with a scissor when done 😁
Maybe I'm talking out of my arse but because of the placement of the cutter it seems to me it should be pushed to band and not pulled. Obviously I can't see the thing close up but see if there's a way to thread the banding in from the front which makes sense to me and then it'll cut the right way ❓❓❓
Good luck with it 🍀🍀🍀🤣
I stay with the bigger roll and cut it down, you will still need loose some for thinner rips.
That Bosch mitre saw that you have linked below, are you happy with it? I bought the simpler version of it a few months ago and brought it back. I does not cut straight or square because of excessive blade wobble/drift.
Hi yes mine works perfectly
What size edge banding material do you get for 3/4 material? I'm assuming 1 inch, then trim. What are you trimming the edge with?
Hi I think it comes in 22mm wide for 18mm boards.
We just use a round over cutter in your trimmer
Very good video, well what other models do you know similar to that kind of machine.
Hi there are cheaper Chinese versions you could probably buy from banggood o somewhere like that.
Other than that this is the only one I know of 👍
What type of edge banding do u use with this machine?? Pre glued or non glued edge banding
Hi its pre glued 👍
Do you now prefer to edge band in preference of the technique you described in ua-cam.com/video/MRA2znS5Nhg/v-deo.html If so why? Which gives the best appearance? and most durable finish?
Interesting video never really used edge banding much a bit of stick on stuff and saw this model before but didn't get any further may reconsider!
Although I have a saved search for a ka65 just as it would match lol but don't think I'll ever get one
Where to get this machine in Ghana how much
Hello, in the link that you gave for edgebander, it is not available anymore. Do you know any place where I can buy the machine? Hope to hear from you soon
Hi here is the link;
amzn.to/3QjvZw7
Alternatively go back into that videos description, I have updated the link there .
Thanks
Ryan
Thanks for answering such a short notice. However I actually meant in the link that you provided, they do not have it in their stock. Link is available but Item is not. I asked where else can I get the item? Is there any other internet pages that I can find the good?
How would the cutter go on 1mm PVC tape?
Its quite a strong cutter, but I couldnt say as I havent used that tape before
Can you not just use some scissors to cut the tape in front if the roller? Might work out quicker than the rethreading option
Your right, next time I use it I'm going to try that out 👍
@@thelondoncraftsmanworkshop I'm looking at edgebander options too so appreciate the video!
Love that it'a good to go as soon as you turn it on.
Cheers
Hi, is it possible for this tool to do edge banding on sloping edges?
Hi no I don't think it will
@@thelondoncraftsmanworkshop thanks for the quick reply! That's a shame, we do alot of sloping tops and trying to find a more efficient way of doing them without spending thousands 😢😂
That's ok, unless u made something yourself?
You need to add Amazon affiliate links to the products, I saw the space but no link
Hahaha thank you
لازمتني وحدة مثلها في سوريا
Good bro but my problem is you didn't put any glue?
The edging has glue on it 👍
I want to buy in UAE
I want this
It's a good investment and they arnt really that expensive
Basically they are selling the prototype. Like so many tools it needs one more tweaked model.
This has been out for years.
I've had one for 25 or 30 years. It has not changed any that I can see.
how much is that machine?
Roughly £280 using the link in the description
Hawmach cast
Please 🙏
name they instrument please
Virutex ag98f
Price sir
Around £300
Cutting the wire just fucked up the warranty !!!
I'll put the plug back on if it goes wrong!
Es