Install a Tachometer Signal Wire on your Diesel Alternator
Вставка
- Опубліковано 5 жов 2024
- Learn how to install a signal wire on your diesel alternator. Here we'll do just that on with a Dodge Gen 1 and 2 Cummins alternator.
Find your digital tachometer interface here (Amazon affiliate link): amzn.to/3O8ayKy
Buy your diesel conversion parts here: adventurevehic...
Doing a DIY diesel swap? We’ve got you covered!
GM DIESEL CONVERSION
adventurevehic...
LAND CRUISER DIESEL CONVERSION
adventurevehic...
UNIVERSAL DIESEL CONVERSION
adventurevehic...
Find some of our favorite gear on our Amazon shop: amzn.to/3J3KihN
#AmazonAssociate - We earn a small portion from qualifying purchases.
Thanks for your support!
I'd recommend using some sort of polyurethane to keep the wire from rubbing, like window seal poly. The double insulation is ok, but given the sharp edge and vibration these motors can have why not just poly it in place as well? Just make sure if you do it dries before driving!
VERY informative I was just looking to do something like this with my Gen 2 Cummins Chevy Squarebody swap
what signal does the wire put out ? i want to put a tach on my riding mower and it needs signal from a generator but it does not have that.
does it jst send a 12v pulse every rotation of the crank ?
Great video! Needed the info for my swap!
How does one regulate the signal from alternator. Using a tranmission control module that uses a 4l80e on a 12 valve cummins. TCM reading 7000 rpm at idle. Need something to convert it to proper specification.
please help me , am trying to convet my land cruiser ,so ive put a new version of diesel cluster , ive managed to get all other signals but my tacho doesnt work im not sure where to find the singal
Good job
Thanks for this video
Glad to help!
2 questions. Could you do a video on how to wire up to the conversion box. Will a factory gm truck gas tach with this set up. I'm looking to do a cummins swap on a squarebody truck.
Why did you not mention what part of alternator circuit that you connect that wire sir is it in the stator cool, rectifier diode, ic regulator, carbon brass what part sir
It grabs the AC before the diodes get to it.
Thanks very helpfull
I like how easy that was. But I need to hook up a tach to a 1980 scout 2 diesel with a Nissan engine. How do I do that?
Is this the same on the nippondenso alternators?
VERY informative
If you have to tune the decoder, how do you know what your actual RPM is then?
Pulse timing adapter on an injection line
I understand the procedure that was depicted. But my situation is based on the square back dual field Chrysler alternator and external regulator for restoration purposes. The tachometer requires wiring to the crank sensor or alternator. At present my two options are, a different unit, or convert the one I have. I would appreciate any information you can offer.
Respectfully,
Biff DeMartino
Good morning, good people, how are you doing today ?
How can I wire a Nissan 1400 original tachometer, it's two back wires are justing hanging ?
The tach i just got has some sort of a sensor and a large clamp that goes around the entire alternator. Does that sensor just pick up a current of some sort ? Seems kinda wierd.
There is a red wire en black wire, how do I connect them ?
Could you, please, tell me how can I do a similar installation on my chevy truck's 6,2 l diesel engine k64 12SI 78amps alternator? I would be indebted. Thanks a lot.
Did you figure it out? I want to add a tach too, but I don’t know how to do it lol I was hoping to be able to do it to my alternator
Can this be done to any alternator?
Will this work on a Gas AlT? My Tach is meant for a Disel or Marine application buy im running it on a 71 Torino
how do i purchase your products? 5.9 first gen air intake, upper and lower water Rad inlet for Ford application?
adventurevehiclesnw.com/shop/
How to connect alternator having two pin with the car a having three pin alternator..so that all the functions can work properly.
QUESTION : How do I wire the Dodge external regulator to my 1987 Chevy K20 6.2L diesel very soon to be swapped with my recently purchased 1996 5.9L P-pump Cummins ?
What part of alternator terminal did you connect that wire which going to tachometer
What Dakota digital box do you sell I can’t find it on your page
Hey.. Wanna ask. If this kind of mod is applicable in 24v car system. Thx.
so I have a 4bt Cummins swap and I am having trouble wiring alternator and the tach.
I have a jk wrangler with an internal voltage regulator alternator which does not want to work and it sends like 17 volts to the battery.
do you know if I can convert that jeep alternator with the internal regulator to the external regulator?
Conversion box for yanmar 3hmf marine diesel engine?
What is the product # for the Dakota digital box
So how do I put a two and old Ford IDI alternator?
Which letter is on the tacho post?
would that work for gas engine to run a generator to power a house would need something to adjust the right RPM do
JUST BUY A HR /TACH FOR A DIRT BIKE THEY RUN OFF THE HT LEAD
what wire do you use when there is an external regulator?
Same kind of wire.
Can you put diagram pls.
2L alternator tacho wir please help
I'm guessing you've got a vacuum pump attached to it.
Did you ever figure it out?