Mechanics Famous Last Words; TRUST but VERIFY
Вставка
- Опубліковано 26 сер 2024
- Our mechanics famous last words trust BUT always verify when working on boats! Many boat owners have no idea how their boats work. Its easy to get hurt if your not careful. It's also easy to get the water and fuel fillers confused it happens more than you know!
Watch as our team of experts meticulously assess, disassemble and restore the these boat/yacht projects. Join us in our journey to prove that with hard work, dedication and a little bit of magic, anything is possible. Don't forget the best compliment is to leave a comment and subscribe to our channel for more incredible boat projects!
Subscribe - / @willfixthat
**NEW VIDEOS UPLOADED EVERY SUNDAY!**
Send all inquires to MobileMarineKW@gmail.com
So thru the years many of our clients have asked us how we "manage the chaos" of Our Boat Repair Businesses! Our videos are made up of projects we are currently work on! You may also see food and drinks sprinkled in since we LOVE to eat! 😁
We look forward to hearing from YOU leave us a comment below!
Thanks for watching, share, like and subscribe 😁!
#boatrepair #yachtrepair #boatlife
How many times have you heard about a boat running out of fuel? Happens much more then what you know ... its crazy!
I know that is a problem on RV's as well, the genset will not work when there is only 1/4 tank of gas to prevent the generator from draining the tank.
I only trust a fuel gauge that says empty, anything else is suspicious!
@@paulkersey2179yeah it’s crazy.
@@captainchrisso9788good rule of thumb 👍
I smile every time I watch your videos. Sometimes I laugh. What are happy costumers? I only laugh because the wife and I own a marine repair business. Its almost like watching a day in my life. Great content.
🤣🤣 we can’t make this sheet up! Boy you had me laughing! Who’s happy these days … lol! We try!
From a retired master marine mechanic I’m impressed with every video you do
Thanks
Thanks for choosing to watch our boat chaos! Any ideas for what we can do better?
Bilge air in cabin space. 1- seal bilge from the cabin or ventilate bilge full time to pull a negative pressure. 2- install traps in condensate lines so water cannot be drawn back into the evsp. This should be routine if the evap. coil/drain pan is in the return. 3- drain condensate pipe to a pump out similar to a shower drain catchpan and pump overboard. Or install condensate pumps to discharge condensate directly overboard. 4- Install return air duct from fan cabin spaces so no bilge air can be circulated only cabin air. 5- UV sanitizer in airduct. Avoid ozone generators is any personel locations. Some research needed for various products to sanitize air. I think that 1, 2, 4 should be required.
Thanks for sharing!
lovin' your content, especially when you walk the docks, I enjoy seeing the water, the docks, the boats at the docks, so beautiful out there in Key West. Thanks for the eatery tips too!
Thanks for sharing …. We rarely go out to eat LOL! You know after a long week the last thing we want to do is go out! It’s hard for Matt to go to the docks after work cause then people just wanna talk about boats! Which when we are out on off time … our rule is no boats! 🤣 Do you visit KW?
@@WillFixThat I don't visit KW as often as I should , I am frequently visiting Miami though :)
@@nolinovio6748 a bit of a ways from us but still nice! 👍
Facepalm moment!! Glad you all found it and realized it sometimes it take some new set of eyes! 👍👍👊👊 Nice job!!
Yup even the pros have those face plant moments!
@@WillFixThat 👍👍
I suggest putting a P trap in the condensate drain to prevent bilge air from coming up into the cabin. Commercial HVAC guys put p traps in condensate drains for a similar issue - sometimes units will pull so much vacuum that the condensate won’t drain at all. Once they install a p trap, it drains fine and isn’t able to pull a vacuum on the drain line.
I’ll give that a try. Thanks for the advice.
so Old Faithful is also in Keys! Awesome! 😂😂🤣🤣👍👍
😂 yup got wet a couple times!
@@WillFixThat 👍👍
Alls I have to say is WOW! Great job once again, u guys are the best!
We try …. Not always pretty but we do the right thing!
Matt and Kerry Ann, I sold heating and air systems for homes when I was a kid. We also would sell dehumidifier units that could be installed in line with the cooling system. I wonder if anyone manufactures such a product for boats. Love the content. Have great week in the Keys.
They do make such a product… Make Up Air Units. Thanks for sharing.
HVAC condensate drain remedy to stop the fan from pulling up the drain you will need a P-Trap in the drain for 3/4 PVC or if vinyl tubing is used put a loop in the tube around the exit point. This Will Fix That.
Great idea. I’ll give it a go.
Black mold can be easily removed on leather surfaces with a lemon cut in half and rubbed on the mold
Won’t that make marks on the leather.
I got half way pulling a race car motor, because I couldn't make it run right, the driver swore he had gas in it, turns out was running like crap because it was running out of fuel. I feel your pain
Ugh … 😩 yes painful but glad we figured it out so they could get on their way!
The easiest way to fix the vacuum issue would be to put a break in the condensation hose. Either that or find a way to allow air to enter the hose when a vacuum starts.
Great idea!
@@WillFixThat Maybe something as simple as cutting thee line and putting the bottom in a funnel/drain/strainer that continued into the bildge?
I would think every boat in damp area's like KW with interior space would have a dehumidifier onboard.
But dehumidifier put out a lot of heat!
Wow, nice work! Some people should just not be boat owners! I'm sure you agree!
Its all about learning & there really are no crash courses…. Maybe we need to create one!
great epsiode! Thanks for sharing! 👍👍
Thanks for the visit 😍
@@WillFixThat 👍👍
Add an additional vent to the a/c box from cabin air.
Possibly
Really like the videos, worked for Tow Boat and can relate to your videos. Seen many rod holders fueled up
Boy you’ve seen it all if you worked for Tow Boat 🤣 I’d love to video a few of their missions.
Fuel gauges are an awesome invention 😂
Yeah right … need to use them 👍
I was thinking about the gas in the water tank issue you had:
Couldn't a person install a temporary recirculating pump from the bottom of the tank to the deck level fill and run it for a few hours at a time, to make sure the tank gets scrubbed by the degreaser\dawn you put in it?
Maybe put a tee in the line connecting them to drain off\fill every so often.
Hopefully you don't have to do this "repair" too often, seems like a PITA.
It’s just a job that takes time.
On my boat, the fresh water fill is literally about 18 inches from the port fuel fill on the side deck. Right after I bought the boat, I caught a fuel dock attendant as he was literally sticking the diesel pump nozzle into the water fill to begin fueling the boat. Since that near miss, I never walk away when the boat is being fueled and also had an adhesive placard made which says "fuel fill" and points to the correct cap. I can't imagine what it would take to ever get my fresh water tank decontaminated, if gallons of diesel were ever to be pumped into it. Of course, it would also be bad, if fresh water ever got pumped into the diesel tank. Sometimes, I think that certain aspects of my boat must have been designed by the engineers in Taiwan late on a Friday afternoon before a holiday weekend.🙄
Think you described at the very end …. What we think every day 😩
Awesome job.
Thanks 👍
Uv lights by evap coil kills all the mildew and mold
Yes exactly when our clients return we are installing them.
Good video. How much fuel did the customer put in the water tank!!!!! Will that water tank every be ok to use again?
To the very top …. Not sure if it will be any good! He needs to let us know when he comes back.
Why don’t manufactures fit water tanks with fill pipes that well not accept a diesel or gas pump handle?
I have seen quite a few boats run out of fuel. In my case I watch my tank level closely. I had a friend who was a charter captain . He had an old Brownell with a two cycle diesel. He ran out of fuel right at the dock. What a time he had purging the air from his fuel lines. Another friend had a big sailboat. He went to the fuel dock and left the dock person to fuel his boat. By mistake they put fuel in his water tank and went through the process you used more or less to get rid of it all along with the smell. I remember it took some time to clean the tank out.
Recently … you’ll see it soon a center console put the gas pump in the rod holder and filled up the bottom of the boat which caught on fire. We were able to clean and fix! Happens more than you think!
@@WillFixThat What you are describing I have seen too. In my case I fuel my boat myself. I feel safer that way. You all never have a dull day,that’s for sure. That was a nice gesture on your part to have the customer with the balky freezer put his food in your freezers.
@@jimlimberakis8115 our days are not dull actually sometimes pretty stressful! Yes us making that simple gesture to our customer helped they relax and it gave us the time we needed to make sure they were fixed! Refrigeration repairs take time. 👍
@@WillFixThat It amazes me the various systems you need to know in order to do repairs.
@@jimlimberakis8115 Matt is amazing cause he can do all these jobs otherwise we don’t do them! If our guys don’t show up Matt needs to be able to fill in. Then of course, there are jobs that just Matt can do! We do our best with all the moving parts!
Any way to slow the fan down? For the boat with the moisture carry over on the AC
Yes in the programming. I did that and then they complained that the speed was too low. Go figure.
With the vacuum and black mold, is your vacuum adjustable with vacuum pull? Or are you able to adjust voltage on pump or a regulated bleed on the line? To reduce the pull.
Have the bees relocated, they need all the help they can get.
Right. neighbor killed two huge hives.
That stinks … we need to help the bees.
I lost count how many times customers told me they had fuel. Guage was no good 😂
Gauge was fine 🤪 they were lucky to slide into the slip the day they lost power.
That clear reinforced water line that’s so common in the freshwater systems is so problematic. No matter how tight you tighten the hose clamps they always to leak some time later, so you snug it up and some months later it leaks again. What’s happening is the moisture, both inside and out is causing the vinyl to shrink and harden across the hose’s cross section. This means the ID is enlarging and loosening over the hose barb. The OD shrinks away from the hose clamp. The way to solve this is to use “stainless, double wire spring hose clamps” these provide constant pressure evenly around the circumference. A common worm hose clamp can’t follow up on the tension. You might have to purchase a few different brands of wire or even some band clamps to find the ones that work best for you.
We use pyi or aba hose clamps.
@@WillFixThat
As long as it has some sort of spring tension, then it’ll work fine on vinyl/plastic hose.
Did you consider baking soda for the water tank?
We will/would consider anything if it works.
One way valve on the condinsate line
Not enough flow for a one way valve but maybe a condensate pump!
You can use Baking Soda for cleaning the fuel tank
We just might do that … we shall see!
Put a p-trap in the drain line to keep the bad air from coming up
From the movie Sling Blade, "It ain't got no gas in it". 😅
Exactly… but they didn’t want to hear it in the beginning! 😂
Next time use simple green not soap, it is bio degradable and breaks down oil and fuel much better.
Thanks for sharing …. We have plenty of simple green.
The boat with the overpowering air conditioning fan. Can you just change the motor on a fan to lower RPM?
Did that and then the complaint was to low fan speed. Lol.
Install a trap in the drain line.
Possibly
Well, after running the tank dry, they prob needed new Racors anyway :)
Definitely 👍
I think the gas eats in to plastic replace the tank.
It might … we will see what the owner thinks here real soon.
Can’t always think Zebras,,, when you see hoof marks….
🤣😊
Number one rule of troubleshooting, is to never ever take the guys word for it that was before you, EVER, start over following kiss rules
Exactly never believe them 🤣 always check! The story always comes out later.
@@WillFixThat I got called in at 2 am because a press wouldn't run, went over everything common on the phone, first thing I said check all the e stops, oh yes we did it's not that, get there and it's the estop closest to the operator is pressed, pop it out and press start! I was so pissed off, then my boss wouldn't pay me the 4 hours because I was only there for 10 min, i've never done a call in since
@@Zzrdemon6633that’s to bad you didn’t get paid…. That sucks it doesn’t matter the time what matters is the knowledge! 😢 I won’t tell you my opinion!
👍👍
I call you out in one of these videos 🤩
You’ll see in one of our videos coming up …. Appreciate your continued support!
Were they PAYING someone for fuel? Would not be the first time a fuel seller shorted the buyer.
No happened at a local place. This was a mistake.
Two fully days it takes to find out there is no fuel supply. Really?
We asked them several times & they were positive!
I know what’s wrong with. It ain’t got no gas in it.
Exactly…. Dry to the bone! Boat is lucky it made it in the slip!
Sling blade
You seriously pumped all that gasoline into the waters of Key West? I wonder if the FWC or Florida DEP watches your channel.
Absolutely NOT …. The tanks were empty. A company was hired to pump and purge the tanks before we took over. The coast guard came by the boat and inspected and told us to proceed with our efforts.
Not really knowing much about boats, common sense dictates that the water tank needs to be replaced. No doubt it will be expensive, but it seems like the only solution. Just saying. 😊really enjoy your videos, very informative.
@@1decks well that might have to happen the owner will need to let us know! Maybe we can change the lines and it will be ok …. We will see! 👍