Volvo Dump Truck | Front Leaf Springs + Steering Components Replacement | Tapered King Pin
Вставка
- Опубліковано 25 бер 2021
- Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
In this video I'm replacing front leaf springs and king pins on a Volvo dump truck.
Please check out my other videos: / @semiworkin
Tools Used:
OTC Tire Dolly: amzn.to/3uRQEZW
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Axle Nut Socket Set: amzn.to/35eFdRW
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
Heavy Duty Floor Jack: amzn.to/31HXrc9
As an Amazon Associate I earn from qualifying purchases.
Asked some time ago if you have tapered king pin work and now I see you have, thanks for the video it brings back memories to an old heavy truck mechanic 🧑🔧
No radio on = no work place atmosphere, would hate that.. .., good job guys..
Awesome video!
28:26. EXCELLENT use of the jack stand as a support when tightening down! I am always learning.
Ica resa
@@omes1892 Sorry but what does this mean, "Ica resa"?
Thanks for watching and commenting I'm glad you could find some helpful tricks of the trade.
Very good very good knowledge
Отличная работа. Привет из Санкт-Петербурга. Сам токарь. Смотрю с большим уважением.
Very good Job , congratulations, Brasil. !!
Ótimo trabalho 👏👏👏👍🇧🇷🇧🇷
Great video
Great Job.. Big truck = Big Tools..
You are the best thanks for sharing
I like the tool you used on floor jack to remove and install the spring
These videos are amazing!! I am learning a lot. Thank you so much and God bless you and your entire family 🙏.
Thanks for watching and commenting!!
Great job...reminded me of my days working on B-36s and B-52s...
Are they airplanes?
Me encanta la maquinaria que buen video saludos desde Oaxaca México
Bendiciones.
Bonito trabajo, muy ilustrativo, lo felicito, saludos.
Excelent!!🎉
Really enjoyed this.
Thanks for watching!! Glad you enjoyed it.
Congratulations, Excellent work. Thinking about hand safety, it would be providential for you to wear protective gloves in this heavy duty, wouldn't it?
👍 the gas wrench for the win.
Good job! I had the exact same impact, memories.
Good job sir but went you repair please to be clien first by woter on area work
@@salehsalim9788 learning good english is a must how ever.
Thank you for showing me how to be a skillful technician, good job.
Thanks for watching and commenting!!
Thanks for this nice video 👍
Great video semi working your videos are educating me on the different Equipment you work on keep the videos coming God bless
Thanks, will do!
ÕÕÕÕÕÕ
ÕÕÕÕÕÕ
ÕÕÕÕÕÕ
Very good job .
Well done !
Nice job and great work from the yours proffecionality person 😀do you have on your team I like how teaching us .
Gracias tanks
GRANDE FROFISSIONAL.
PARABÉNS PELO TRABALHO.
RIO DE JANEIRO/BRASIL 15.05.2022.
VIDA LONGA E PRÓSPERA 🖖
Amigo se observa que te gusta lo qué haces 🤛, eres disciplinado y rápido en tú trabajo, es trabajo pesado pero sencillo no tiene nada de complejo. Las zapatas son sencillas en su montaje. Felicitaciones desde México 🇲🇽 🙋🏻♂️
Y corta las Abrazaderas para cobrar unas nuevas jaja pensé que solo en México hacíamos eso
That was awesome. So helpful in my 1978 White resto just to see how you would approach things.
Thanks for sharing 👍
Thanks for watching and commenting I'm glad it was helpful.
I really enjoy watching his technique, let your tools do what they're designed for, work smarter not harder.
I liked seeing how clean your hands were . Thanks for the video.
Essa desmontagem na mão grande levaria uma semana. Viva a Ferramenta.
Conheci um moleiro chamado Adanzinho 1.50 de altura trocava sem tira o eixo em quatro horas isso era fixincha pra ele e só no braço 😄
Excelente! Muy bueno el trabajo que hiciste! 👏👏👏 Son trabajos de transportes pesado. 👍
ótimo trabalho, muito profissional ; porém, deveria ser mais limpo
Great video! I've always wondered how that heavy suspension work was done.
I dont know where you work but l dont think l have ever seen a professional do the job like you are with all the right tools and skill. Its nice to know that kind of job can be
done without a lot of pain and consternation. I think the hardest
thing to do is disasembleing the job.
It looks like putting it together might be a little ezer. I'd love to have a shop with all the GREAT tools. Happy wrenching!!!!
Nice job
Thanks for watching!!
Very good job 🌟🌟🌟🌟🌟 great American work hard for there 💰
Interesting king pin setup. Better or worse than a standard pin with a couple cross pins for locking?
Thanks for watching!! This is a better set up in my opinion just because they last longer and I do fewer of them.
Parabéns muito bom o serviço só que este serviço acaba com o cara mesmo com o maquinário muito peso e a posição do mecânico quando chega a idade cara tá todo ferrado mesmo assim é um serviço adequado bem feito parabéns aí pessoal
Tem que trabalhar cantando ou conversamos mais legal muito bom seu trabalho
10:34 thats smart, thanks! :)
Không phải chê thợ như đầu b á
@@thongnguyen6224 sure dude
Show 👏👏👏 só faltou lavar o espelho pra ficar um serviço ainda mais qualificado🇧🇷
Да с пакистанскими умельцами не сравнить.Там все в ручную на голой земле старое снимают правят и обратно ставят.А здесь все новое и домкраты.Отлично!
and I thought my english was bad.
Пакистанцы Специалисты, а так любой рукожоп может
The spring pack... is that how one could upgrade the front axle rating? Say, from 12k to 14k, 18k, etc.
Didn’t know that tapered king pins were a thing. Still learning. And I hate those “Ben-Hur” lug nut covers.
Thought I was the only one that hated those lug nut covers.
Buen trabajo, felicitaciones 👏👏👏👏👏🇦🇷
Hello, I would like to thank you for the elaborate and generous work, and I want to ask if you welcome trainees for mechanical learning.
You need a consistent 120+ PSI air pressure to complete the project correctly. Good luck.
Genial
Did the driver find the broken spring or did the maintenance shop?
Brings back memories of using. Air impacts lol i still use air impact but my 3/4 and 1"
Aqui no Brasil também é assim
Why do you spin the bolt and nut with the impact before throwing the wrench on? Still new to it all
I think he's making sure the bolt isn't rusted tight in its hole. Spinning it before using the wrench makes it easier to get the bolt out once the nut is off.
@@johnz8210 Yes in North America road salt is used to melt snow but it also rust car, truck parts faster.
@@Thillx2 Absolutely. I work on cars and small trucks every day here in the rust belt.
Thanks for watching and commenting!! I was just making sure everything was moving easy to make the job go smoother.
Where can a man find all the various manufacturers torque specs for king pin like work?
Иза одного листа пол машину разобрал
Я тоже такого мнения! Стремянки взял порезал автогеном.
Where can you get the front axle support that attaches to the floor jack?
Hand made
Great vedeo and great explanation 👍 is a heavy and expensive work 🤔 this caind of the works takes time and also needs carefully and check all baljoints! etc... great work fellas 👏cheers from Norway
But they are paid not so much
Loved the video, Thanks!! I'm not a mechanic, so are most of these types of spring and king pin jobs from just wear, or from abuse, or lack of maintenance?
Thanks for watching!! Usually all of the above.
Why change the leaf? It looks like its in good shape.
Since everyone seems to cut off ubolts I’m guessing they aren’t reusable.
what is red grease ?
Интересно,пакистанцы смотрят такие видео?))
Им запрещено.а то понадобится помощь психологов потом.😁
Condiciones normales de trabajo, herramientas adecuadas. Lo único que pienso, no sería mas económico desenroscar 8 tuercas que gastar tanto acetileno en cortar e inutilizar 4 bridas de ballesta?
💪
👍👍👍👍!!!!!
What was wrong with old leaf springs?
.
Será que solo yo pienso, que hace falta una buena lavada antes de entrar ahí..?
.
Es trabajo de Mecánico hermano no de Doctor
claro con todo respeto
@@marioguerrero3991, y con todo respeto; hay mecánicos puercos, y hay también buenos mecánicos que cuidan que no caigan restos de tierra dentro de algún rodamiento...
@@jorgeantonioromeroespinola2514 si pero pues jale puerco mo hizo el amigo, si hizo mucho para solo cambiar un peine de muelles y eso si lo cambio completo
pero no es tanto como para andar lavando antes de trabajar
Amigo porque cortar os grampos do feijões de mola, so para facilitar!?
Pq o país não tem muita pobreza igual no Brasil q economizar tudo
Buddy am working in ashok Leyland
For using pressure gun to be more efficient, how much minimum pressure should be maintained at a compressor..lot of mechanics worry ...takes more time also
Thanks for watching!! Minimum pressure should be around 120 psi. Always go back over and torque nuts/bolts to proper specs.
Could you not reuse the ubolts?
Indonesia
De fortuna no desarmó el motor tambien
Don't think you had enough grease on the king pin....!
А в России в дороге так сможете?
Я передний лист менял зимой.на стоянке.рано утром начал,и к вечеру только закончил.на мазае.
That is one hellofa pay day....!!
Thanks for watching!!
الطريق فيها بعض الاخطاء لماذا فك العكوس المروض نزل الدنقل بالعكوس هو بيغير سوستة مالها دخل بالعطل
That work will make an old man sore the next day.
Thanks for watching and commenting!! I definitely sleep good at night.
Confused where are the wedge brakes,, not used to S cam brakes
😊😊😊😊👍👍👍👍👍👍👍
@21:42 there goes the boot
Nothing different from an older vehicle to this.. My 90 grand wagoneer.. same thing.. just smaller parts.. funny how things are. Youire lucky you have a garage and all those tools.. iamgine doing this by hand... in a parking lot with just some power cutting tools LOL..
Nice Maintenance ,But why cut u bolt.Dont cut u bolt in Japan.
El q sabe sabe
Zapatero a tu zapato
Mi Respeto Maestro
É um serviço que o mecânico tem que ter valor é um serviço de cão aí tem ainda uns aí que crítica o cara que não lavou a peça caralho ainda nem acabou o serviço só lava depois este merda devi ser perfeito acho que nunca fez um trampo deste fica criticando
Es enserio que hizo ese desarmadero para cambiar un resorte 🤦♂️🤦♂️🤦♂️
Volvo NL
vifro canciones satra videos cancionrs hass las dos chica
В российбы Иван с воронежа магомед из Дагестана и абдурахман из Казани эту работу за час зделали бы открутив четыре стремянки и один дамкрат поставив
Я на газельке весь мост выкатывал.так легче и быстрее.
Арийский ремонт. Тут смотрел ремонты в пакистанских гаражах, тупо небо и земля)))
must be mad at americans.
Hy
hermoso trabajo pero falto mucha limpieza en los componentes le doy un 4
Why gas cutting?
Así es mi amigo en Costa Rica ese trabajo lo hacemos y limpiamos y lavamos todos los componentes cuando armamos de nuevo todo va limpio y lavado aunque sea las mismas partes que se desarmaron y como dice usted para cambiar las hojas de resorte desarmaron casi medio camión y hasta máquina de acetileno yo trabajé joven en mecánica pesada y esos trabajos los hacíamos todos los días el señor trabaja bien pero desarma demasiado
Praca bez rekawiczek ochronnych lekkomyslnie
poco aseo
Demasido trabajo innesesario,para cambiar las muelles no se necesita desarmar todo el eje!!aquellos q piencen q es un buentrabajo no saben nada,ni idea tienen del trabajo d un muellero!!
qie laburito chamgo
M
Trucks r always abused by owners n drivers, overloading. So in years to come, leaf springs just break off easily. Some countries owners don't replace the whole new set but instead they replace the broken piece s then add 1~2 more new piece s together !?
Drivers should work n drive safely.
no show taking kingpin boalt very bad
ة