GMC Dump Truck | King Pin + Front Leaf Spring Replacement

Thanks For Watching!!! Please Like And Subscribe.
Please check out semiworkin.com
Remove and replace front springs and king pins on GMC dump truck.
Please check out my other videos: / @semiworkin
Check out some Semi Workin apparel: teespring.com/stores/semi-workin
Tools Used:
OTC Tire Dolly: amzn.to/3uRQEZW
1/2" Air Impact Wrench: amzn.to/2M1bV2l
3/4" Air Impact Wrench: amzn.to/3nW2ZcN
3/4" Axle Nut Socket Set: amzn.to/35eFdRW
Pneumatic Bottle Jacks: amzn.to/3nKxyBR
Oil Suction Gun: amzn.to/3nsuMAw
As an Amazon Associate I earn from qualifying purchases.

[@stevelalondejr2183]

Replaced them in a N 600 Ford yeah I was in my 20s as was the truck the man that let me use his shop,tools & knowledge was my fathers age a great mechanic,teacher,friend & saint. He showed,taught,words of encouragement then would walk away I learnt plenty new words included. Yes my 1st and last set of king pins they worked like or better than new. They came apart kicking and screaming they must all come apart the same way. Retired now due to MS just turned 60 trucks gone,dad's gone the mechanics gone what I wouldn't give to do it again ....lol Memories that this brought back to a country boy,farm kid,water well driller & machinist thanks ,Semi Workin great job ! Wish you had shown a bit more as to what's required to align an replace the pins back was the easy part.

[@SemiWorkin]

Thanks for watching and commenting!! Some are easier than others but I'm glad you enjoyed watching.

[@RafaelGarcia-jt4bp]

Good job,cogratulation,from Guayaquil.Ecuador Sud America

[@otdagoat6781]

yoo,u help me alot thanks

[@dennissmith460]

Okay, now that's how I'm used to seeing king pins come out. Kicking and screaming. Lol

[@SemiWorkin]

Thanks for watching!! This one wasn’t no joke!

[@vinatechcoy]

It's an incredible job!

[@skillstruckrepairer3880]

That's right.

[@Andrew41163]

А что в этом невероятного, скажите, уважаемый? Обыкновенная замена шкворня и тормозных колодок, ничего сложного. Просто работа, ничего особенного.

[@angelmacias5368]

Muy buen trabajo felicitaciones, saludos afectuosos de un Ecuatoriano en NY

[@bansheebutler]

I love watching your videos but I wished you showed how you install and ream the bushings for the kingpins. Thanks, and keep them coming!

[@SemiWorkin]

Thanks for watching!! I use no ream kits from stemco and I have a video on king pin bushing replacement.

[@hddm3]

Semi Workin that’s the only way man! Saves so much time and agrivation

[@J.R.in_WV]

You can ream them with a wheel cylinder hone if you know what you’re doing.

[@MiMi-nx9bl]

@@J.R.in_WV
Ni

[@fuddmethen]

my new favorite channel

[@SemiWorkin]

Thanks for watching!!

[@ableone7855]

Great camera work! Love your videos.

[@miguelangelvalderrama1808]

That front axle looks very good to make a wagon to my tractor to carry water or flat bed.

[@SemiWorkin]

Thanks for watching!!

[@djamelhamdia134]

Exactly what I was thinking.

[@miguelangelvalderrama1808]

@@djamelhamdia134 💪👍👍👍

[@cleuzasouza3268]

Boa noite sou do Brasil muito bom seu trabalho vc é um profissional

[@toninhoferrazoliveira9102]

Que trabalheira, mas o cara tendo toda aquela aparelhagem fica mais fácil!!

[@helderhenoch3698]

Boa noite daqui de Portugal gostei do seu vídeo parabéns muito profissional obrigado um grande abraço Hélder Henoch

[@jeffpeter1453]

In 1965, Jersey Standard started to acquire coal assets through its affiliate Carter Oil (later renamed Exxon Coal, U.S.A.). For managing the Midwest and Eastern coal assets in the United States, the Monterey Coal Company was established in 1969

[@elisioeudes6288]

Excepcional guerreiro!!

[@slametmaksirun5471]

Kerja bagus!

[@jamesjakubowski7337]

You do good work man! Keep’em comin.

[@cucoherreragarciayumo267]

very profesional job my friend congratulations

[@SemiWorkin]

Thanks for watching and commenting!!

[@uwapaduga8974]

Great good job sir

[@skillstruckrepairer3880]

good job.

[@mastain8227]

Jozzzt👍👍👍👍👍👍👍👍👍👍

[@cat-cambodia1801]

thank

[@sidneysoterio2374]

Muito perfeito esses seu trabalho, parabéns amigo!

[@heripinapin3637]

Good job...i like you channel i from indonesian west borneo.

[@user-rb2kz9ep2i]

จจ๗จจจ

[@SemiWorkin]

Thanks for watching and commenting!!

[@mestrejorgeschneid]

Muito bom o seu trabalho! Obrigado por compartilhar.

[@julioquinn3718]

instablaster

[@GauravSingh-44]

Good job bro..

[@ricardoaniballosadaherrera3690]

Muy primitivo sacar la rotula a golpes de martillo!

[@125sm3]

Great channel, new subscriber from England

[@SemiWorkin]

Thanks for watching!!

[@HieuNguyen-pp5ww]

Choi sang quá chừng luôn

[@moisescardoso2609]

Preciso que você faça algo do gmc15190 Truk

[@CARYUNG119]

영상 잘보고갑니다 ^^

[@tronikaservis2130]

Wow

[@SemiWorkin]

Thanks for watching!!

[@kmtm8886]

Great job.

[@SemiWorkin]

Thanks for watching!!

[@nyanmobil3050]

Nice video

[@doutordelmar]

Good Job !!!

[@SemiWorkin]

Thanks for watching!!

[@antoniovazquez-ty6dc]

Buen trabajo pero yo habria reapretado las grampas de los elasticos despues de tener el peso del camion encima .

[@mybestieischloer2401]

good vidio

[@annecrompton918]

Would have been nice to see the bushes being fitted and reamered out.

[@SemiWorkin]

Thanks for watching!!

[@emresari5808]

@@SemiWorkin 👍👍👍

[@tree9851]

Is that hydraulic press homemade or factory built?

[@mariomorozinbajcic3408]

Ademas de usar oxicorte para corar pernos U.....tampoco se debe hacer, para esto debe soltar las tuercas y sacar el pero U (abrasadera) mecanicamente sin romper nada

[@pedrobolmen7352]

El dijo que no reusa los u asi que no tiene caso quitar las tuercas todo Nuevo

[@douglasmorrison9098]

Wondering why the oil was low in that wheel and after you got the wheel off I saw where it was on the shoes and springs so that truck needs new shoes and seals too

[@SemiWorkin]

Thanks for watching!! Yes it got new shoes and seals.

[@mariomorozinbajcic3408]

Debe sacar primero la rueda y no desmontar todo el conjunto del nucleo porta rueda con solo sacar la tuerca del eje.......asi no se hace porque rompe el sello de aceite al armar todo.

[@adolfoangelmoreno8161]

Un trabajo así cuanto vale estoy perdió en precio porfavor cambiar las ballestas montar las u cambiar pasadores a un 350 Ford cuanto se cobra

[@5phutsangtao-iQ]

You are an auto mechanic

[@SemiWorkin]

Thanks for watching!!

[@hddm3]

Man I need to know where I can get one of those spring holders. Danm I’ve been man handling these damn things this whole time.

[@SemiWorkin]

Thanks for watching!! We just made an attachment for the jack out of some scrap laying around.

[@jorgezepeda4740]

@@SemiWorkin b6

[@HieuNguyen-pp5ww]

Có kỷ thuât ban làm ắtpige rất kỷ

[@BOBSYMACK]

Great content. Those king pins looked pretty dry like they did not see too much grease.

[@fredkaminski6138]

You need a Tiger Tool! No need to cut u-bolts!

[@SemiWorkin]

Thanks for watching!! I was replacing front springs anyways and I never re-use u-bolts so no since in trying to save them.

[@dirtfarmer7472]

When I sold my truck it had 1,128,000 miles & still original king pens & bushings. Serviced every 10,000 miles not much work off road

[@SemiWorkin]

Thanks for watching!! Regular service goes a long way.

[@RobertKohut]

Nice! :-)

[@SemiWorkin]

Thanks for watching!!

[@Dan-qp1el]

What kind of wheel lift is that?

[@terrellscaife2411]

What size socket did you use to take out that Bearing nut

[@terrellscaife2411]

And do you think the tiger tool 90150 would’ve helped you in this situation

[@SemiWorkin]

Thanks for watching!! The outer nut was 2-5/8” and the inner nut was 4”. I’ve never used a tiger tool so I’m not sure.

[@patcoggeshall8263]

Should show stuck cotter pins remain an installing bushsing I like the way u set shims I do it the same way but did u torque u bolts an y not take tier of in the begin

[@SemiWorkin]

Thanks for watching!! Not everything makes it in the video.

[@James-Prinsep]

Brother,how to set caster angle on front axle

[@SemiWorkin]

Thanks for watching!!

[@jorgeantonioromeroespinola2514]

Coloca una cuña, entre el elástico y el eje...

[@johnnyholland8765]

Was the spring pack broken or just fatigued?

[@jonka1]

It looked tired to me. Years ago there were firms who would re-set and re temper them but I suspect now it's new ones

[@SemiWorkin]

Thanks for watching!! This was a salt truck and everything was rusted and worn out.

[@Carlos-vf7jy]

O cara é lento de mais mas nem acelerando o vídeo ficou rápido assim não dá

[@leonsalomon2967]

you turn bearing whit a few drops oil?!

[@SemiWorkin]

Thanks for watching!!

[@HieuNguyen-pp5ww]

Công nhân đủ đồ choi

[@AJCOOL357]

You work at a suspension shop only ? No engine work or nothing?

[@SemiWorkin]

Thanks for watching!! Suspension only

[@silvinoperalta3358]

Con esa plumita asta mi abuelita .saca la llanta completa . deberían de sacarla pulso como yo las saco así completas y también los yoyos traseros .completos soli es cuestión de maña

[@alexisdeville3605]

Seems like oil hub is very low on lubrication!

[@SemiWorkin]

Thanks for watching!!

[@moisescardoso2609]

Porque do gmc15190 os inbuchamentos vai rolamento

[@jorgeantonioromeroespinola2514]

Na kombi também...
Só que tem muitos que tiram os rolamentos e colocam buchas de bronce, ou seja, estragam a peça com isso...

[@jorgeantonioromeroespinola2514]

Na kombi também...
Só que tem muitos que tiram os rolamentos e colocam buchas de bronce, ou seja, estragam a peça com isso...

[@Patmos25]

Show 👏👏👏🇧🇷

[@michaeldunagan8268]

I wish my tie rod separated as easily as his.

[@jesussolorio8221]

No entiendo la razón de cambiar las muelles, ¿Se quebraron, o qué pasó?

[@jesussolorio8221]

A veces las cambian nomás por gusto.

[@jonka1]

Ellos se veian cansados ​​y debiles

[@claudio.napoleaoferreira995]

e.Estados.Unidos.até.para.tirar.a.toda.do.caminhao.mecanico.não.sofre..

[@dinosmore8845]

Why do you grease the threads?

[@dinosmore8845]

oh sorry nevermind thats loctite

[@Sojourning_]

O I remember those days back when. 60,s 70's in 75 I moved over on to cat,
liked big toys, old cat yellow,

[@SemiWorkin]

Thanks for watching!!

[@elyaskamilebrahim8248]

👌👌👍💪👌👍

[@SemiWorkin]

Thanks for watching!!

[@mohamadmansourzare7635]

Ok

[@CarlosAlberto-hu8hc]

Sou brasileiro. Me perdoa pelo meu comentário. Mas aprenda a desmontar manga de eixo.

[@jeffpeter1453]

Since the 1911 Standard Oil Trust breakup, Jersey Standard used the trademark Esso, a phonetic pronunciation of the initials "S" and "O" in the name Standard Oil,[3] as one of its primary brand names

[@edgonzalez1871]

Thank you for the videos...

[@SemiWorkin]

Thanks for watching!!

[@oswaldodiastavares4746]

40

[@josedelcarmenmendeznunez2536]

Buena enseñanza pero hay algunos pasos que nó se hacen de esa forma,
gracias :José Mendez
de Colombia.

[@forexcryptoute377]

Man that thing was dry

[@SemiWorkin]

Thanks for watching!!

[@antoniobraganca3141]

👍👍👍🙌👏👏👏🙌😃😃😃😃

[@SemiWorkin]

Thanks for watching!!

[@HieuNguyen-pp5ww]

Công nghê cao quá viêt nam theo không kip không tốn sưc ngưòi

[@tedz1238]

No putting greasing bearing. Only oil putting.. so manny material lost..

[@waldomiromoreira2077]

Why do not remove the wheel firstly???

[@user-re1qc4lh3b]

А чё отвернуть нельзя что ли было гайки на стремянках.

[@user-mw3sv2rw1j]

зачем они ещё древнее чем сам грузовик да и многие их меняют потому что их бывает хрен открутишь

[@Rosario19580]

I'd have replaced both sides

[@user-cd1xt4wp4g]

허브 베어링에 구리스 안치네

[@jeffpeter1453]

ExxonMobil, is an American multinational oil and gas corporation headquartered in Irving, Texas. It is the largest direct descendant of John D. Rockefeller's Standard Oil

[@Caliiforniicatiion]

👏👏👏👏👏👑🏆🎖️👋😷✌️🇧🇷

[@joseredondo9018]

Not cleaning not wascher whit gasoline other quimic not Paint 🐖

[@SemiWorkin]

Thanks for watching!!

[@devarajusheelam4793]

Genres nhai rhakthai

[@mauriciowilson8829]

mmmmmh... ¿el video está en cámara lenta... o el barbudo es lento...? (A ése ritmo de trabajo con flojera y manos de damisela... primero se hundirán los corchos en el agua)

[@urbanturbine]

No one wearing flip flops?

[@sureshmange6526]

Chutiyapaa

[@user-lp6ct2ud6c]

광고없애주세요