How to Troubleshoot Your Dometic RV Fridge (With a Mobile RV Tech)
Вставка
- Опубліковано 28 лип 2024
- Here's a step-by-step walkthrough of how to troubleshoot a Dometic RV fridge.
~~~~~
Are you ready for some RV maintenance hacks that could save you some major moolah?
Check out my Ultimate RV Maintenance Guide Here:
rvrepairwoman.ck.page/guide
~~~~~
Time Stamps
0:00 Intro
1:17 Prep
1:45 Ground
2:21 Terminal Block
3:31 Thermal Disk
5:48 Thermal Fuse
7:43 Fuse
8:32 Orange Wire
11:05 Gas
11:59 Gas Valve
12:55 Ignitor
14:21 Propane
16:20 Electric
16:37 Black Wire
17:16 Outlet
18:21 AC IN
19:31 Fuse
20:29 Heater Pin
21:59 Heating Element
~~~~~
SAY HI ON SOCIAL!
Website: RVRepairWoman.com
Instagram: / rvrepairwoman
TikTok: / rvrepairwoman
~~~~~
~~~~~~~~~~~~~~
RV, Camper, Fifth-Wheel, Motorhome, Fleetwood Flair, RV Maintenance 101, Mobile RV Tech, Las Vegas, Henderson, Summerlin, Nevada, RV Repair Technician, Save money, Save time, Certified RV Repair Tech, RV Tips and Tricks, NRVTA, National RV Training Academy, Water Heater, Dometic, Atwood, RV Inspector, RV Inspection, Suburban, Dometic, Fridge, absorption style fridge, thermal disk, thermal fuse, circuit board, eyebrow board
LOVING that people are finding this video helpful. If you would like some RV maintenance hacks that could save you some major moolah then check out my Ultimate RV Maintenance Guide Here:
rvrepairwoman.ck.page/guide
YOU GOT THIS!
Thank you! Your video helped my solve my issue with no spark. As a note, on a lot of models the "re-igniter board" is separate and replaceable. Original part number: 2931132019 Now made by third parties as 2931132019MC or 2931132019-A. The board in the video though has this combined onto the main control board and is not replaceable.
What a breath of fresh air this woman is. So knowledgable and puts a lot of so-called RV experts to shame.
Well you just made my day! Thank you for the kind words!
@@rvrepairwoman I have one situation that is not in the video. When trying to run on gas, I don't hear the "click" from the valve and also don't hear the "tic tic tic" from the igniter. Valve and igniter are new. 12v and 220v work perfectly. Is my electric cardboard gone?
Thank u for your video. You saved my camper refrigerator. The green wire pin came off to the eyebrow panel. The fridge had power but would not get cold. Worst part is we are leaving on a camping trip tmrw. But thanks to you and your video we are good and running. Really appreciate you..
As a guy who spent my entire career in an electro-mechanical field, I find your explanations a little dragged out, but probably exactly what is needed for those without my (our) background(s). You have been spot on with the diagnoses in both of the video’s I’ve watched so far. Great personality mixed with accurate technical info shared. God bless you! Thanks for your willingness to share the talents you have been blessed with.
Emily, Your explanation is amazing. I have worked in electronics for over 55 years. I have never heard such a cogent and clear walk through a troubleshooting process as yours. ( your analogy of a switch being like a drawbridge is brilliant ). Tomorrow I will follow your logic and troubleshoot my Dometic refrigerator that won't cool on shore power. Thank you!
Spot on!
Emily, I was able to follow your logic to a blown fuse and then an open circuit in the electric heating element. I used a simple meter and an amp meter. I replaced the element for $20.00 and the fridge works and is still cold after 3 days. Thank you.
Your troubleshooting process is fantastic! I followed your process to determine where the problem might be on my Dometic RV refrigerator and your step-by-step system saved me $50! It ended up being the thermal fuse so I ordered the replacement and will install it tomorrow. Thanks so much for what you do!
One of the best play by play for a Dometic fridge. Thanks Don
We bought a 2014 coachman clipper in the fall from a friend who stated “everything works”, we got it home winterized it and patiently waited for spring to enjoy some camping trip. I pulled it from storage yesterday, dewinterized it and discovered I cannot get the fridge or hot water tank to work. Spent the night disappointed and aggravated then I discovered this channel and now I’m confident I can make the repairs with your guidance. Thank you so much!!
Just subscribed. I followed your troubleshooting procedures step-by-step and found my heating element was open. Installed a new one and within an hour had frost building up in the freezer. Thank you!
Outstanding Video. i am an Instrumentstion Engineering tech and this covers everything clear and concise. Well done! Gloves was a great tip, No fingers touching metal parts when measuring AC, lot of people rest thier hands on the metal when poking around, or put thier index finger on the netal shaft of thier screwdriver.
My god, I have a 30 year old ford transit where the fridge works on gas and mains but not on 12v and thanks to our algorithm overlords, It brought me to this video and it only dropped 5 hours ago.
Instant Sub!
Thanks for all the tips
I''m so glad this video found the right person!
Well done! Clear, concise explanations of all the logical steps. If only all how to videos were as good 👍
Emily, you're so good. After I watched the entire tutorial, I towed my coach to the nearest walmart. When I went to check / troubleshoot my fridge, it was already working! Damn....
Great video!
I had already gone through the testing via a different video. The testing revealed that the circuit board could be bad. I needed confirmation, so I went through all of the tests again using this video. Same results but in this video, you mentioned tapping the relay. When I did that, I had 120v on the heater pin and it worked. However, it was a one time fix and didn't work again. It gave me 100% confirmation the circuit board was faulty. (Thank you)
This video was fantastic; THANK YOU! Was able to diagnose my issue thanks to you great step-by step checkpoints!
Great video and love your art direction 😎. I have been doing battle with my fridge for 20 years. I always get it up and running, but you got me there faster with my new problem. 👍
I bought a 1994 flair last year ,and I love it
What a great video. So much information laid out so clearly! Thanks for posting. You've made the world better 😊
That’s what I’m aiming for! 😊
I fixed my dometic fridge after not working for 4 years and 6000 dollars I tore the SOB out and replaced it with a 12 volt furrion. It works and freezes ice cream
Great job great explanation. You’re a wonderful teacher. Thank you so much.
It seems I've gone thru scores of RV refrigerator videos. This is by far the best.
Agreed!! This is definitely the best!!
Thank you so much you made it so easy to follow an saved me time and money an I figured it the problem thank you again
Thank you, superb explanation.
As being daimbranaged on a horse fall, I'm rewatching this video over n over... and walla'
I fixed it with your help of coarse. Wonderful,informative
Video.
YAS! Glad your fridge is working again!
Wow you just taught me so much. Like, voltmeters have been a total loss for me. You just made it make sense. I think. 😊 My voltmeter gonna be voltmetering. 😊 thank you! ❤
Glad it helped!!
All makes perfect sense. Here we go ....!!!!! 😎😎😎 Thank you !!!
Excellent and entertaining. Many thanks!
You've already helped me and I just found your channel. Thank you very much,
Wow, you’re really good. Thank you for posting this. I a fellow woman am trying to fix my fridge again on my RV.
You got this!
Purchased a new circuit board from Amazon based upon all the test demonstrated in this video. Fridge is up and running again. Thanks!
YAS! Love to see it.
Great video. Took a trip in 5th wheel a few weeks ago and fridge did not work on gas, but worked on electric. Love trying to fix things myself and this video helped me know where to start. As of now before digging into, I am getting the tic tic tic, but no whoom! 😂 Will go through these steps and am confident that I will be able to troubleshoot and fix before a big 6 week trip I am getting ready to take to the upper west in August. Thanks
You're an angel. Thank you for your explanation!
best path explanation i have seen yet. thanks
This woman is great. My fridge didn't work and I followed her method and determined my circuit board was bad. My Power Probe read 3.7v at the orange wire but 13v going into the board. This indicates the board is bad. I was using a power probe to test the board which can apply power, so I pushed 12v to the orange wire and the fridge came to life. I then disconnected and reconnected 12v to the fridge and it works normally in all modes. Maybe this trick will help somebody get a few more days out of a bad board. Good luck
Everyone is right by the way most clear concise job of getting through it all. Keep up the good work you viewership will increase
You are an amazing educator. Tomorrow I will begin my troubleshooting journey. If you were closer I would offer up my Norcold for a video. Wish me luck!
Thank-you, Thank-you, Thank-you. Was on battery and solar all day and went to change over to gas , no clicking. Followed your video and was the board. We are one our way to Alaska with a full fridge What a disaster if it wasn't for you. Flashlight and cell in hand and you fixed it and, I learned something. Again thanks.
Allen
I love the visual! Glad we saved the fridge together!
You rock! I love the way you teach, thanks a lot for sharing 😍
Got to camp fridge want working , panic set in found your video . Went and got a tester and bought a backup mini fridge at same time. I came back started testing found a blown fuse on circuit board. Another trip to find a agx 3 fuse put it in and fridge worked . Took back the mini fridge and had a cold beer for you . Thanks for your video
I’m to make sure there is more cold beer in the world!
Thank you for a very informative video, I was able to diagnose my problem on my fridge!
Very Good vídeo, One of my new favorite Instructors, Gracias.
Great to hear!
I watch a lot of UA-cam videos and yours was one of the best. Thanks!
Wow, thanks!
Excellent video - well done. Love the popup captions, love your enthusiasm. Cheers.
Many thanks!!!
Great video. Figured out my problem. Thank you.
Great to hear!
This video was AMAZING! ❤
Friggin best video EVER, hands down!!!!!!!!!!!!!!!!!!
❤️thank you!! Glad people are finding this helpful.
Excellent content. You have earned a new subscriber. 😊
This is an epic master class. Thank you!
A tree about 10’ from out TT was struck by lightning 5 days ago. Came home to fridge, WH, and furnace non operational. The GFI was also blinking red for replacement. We replaced gfi and outlets work again. Thanks to your video I chased down the eyebrow board in refer as being the culprit for no lights and no operation to refer. I found out our furnace and WH boards are also toast and will be replacing them once the new ones come in the mail. Thanks for the videos and tips.
Yay! Sorry to hear about your rig, but I love hearing about people being able to fix their own RVs.
Enjoy your videos very helpful
I'm very lucky to have found your channel. Vids have outstanding clarity, order, editing, and information. I've been working around RVs for years but I tip my hat to you... I've learned a lot! I see a lot of subs in your near future🤙 BTW.. You'd have unlimited opportunities and also have fun in Colorado. Here near the Front Range the wait is often weeks to get an appointment for an RV tech. Thanks for the vids!
I’m overwhelmed with work in LV as it is! 😂
Really great video, but I just ripped my pcb cover in half. To remove the cover over the PC board - Once you have the screwdriver in the little slot, don't "wiggle it around," you need to move the screwdriver handle to the left. This forces the bottom of the cover to the right which lifts the front cover over a little tab, located behind and to the right of the cover. So don't twist or jiggle anything, just move the screwdriver handle to the left.
BTW, I really appreciate the content of this video. Thanks for all you do!
Good video. Nice job
wish i would have seen this before i went to vegas last week could have had ya come diagnose my frig which does not seem to wanna light on propane? home now so am going to order a new control board and hope for the best.... 🤠
Great info thank you, mine will work fine and then one day it cuts out. And then it will work again. Older fridge it’s heating up but not staying cold, fridge is always on electric plugged in.
Thank you! This really helped with my fridge. Also, I'm a woman with Crohns! 🤜
Rock on! Gastro girlies got to stick together.
Instant sub. Great break down. Now can you please do a Norcold rv fridge. I'm getting a LO DC error when I try to run off battery. AC and LP work fine. Thanks
Thanks Emily for the great step by step process. I went through it and was still at a loss. My symptoms were a little different. The unit initially would not light. The ground from the igniter unit was not getting good connection, cleaned (your advice). Unit would light but would then shut off after a bit of time. Indicating a thermocouple. Checked voltage when unit was lit, only got .009 to ,011 volts (or 9 millivolts) from the thermocouple. Just for giggles I also let a long Bic lighter under the thermocouple, the voltage went to 25mv. Checked thermocouple mounting, it was loose, apparently allowed the Thermocouple to slide away from the flame. Adjusted and locked down. All is fine.
Great tips! Thank you!
I just found your channel. I live in Las Vegas so I will be calling you. My fridge will work when i override the system and plug into an extension cord but is using up propane. Won’t work on electric. Probably something simple since it’s 2 years old
Didn’t hear you mention the reset button on the thermal disc? If the thermal disc fuse keeps popping is it a bad thermal disc that needs to be replaced or something else?
Thanks for this video, it's a big help. It looks like everything is working OK on my fridge, it cools great on AC, I get flame on propane however the fridge still doesn't cool very well on propane. I typically camp without electricity so propane is a must for me. Any other ideas on what I should look for? It is a Dometic RM8501 in a 2015 RPod 179. I have tried to clean the orfice tube and jet and the flame looks to be the same size as before.
very good video, on my circuit board there are a few places where I get the 12 volts as should and where I don't get 12 volts. This means circuit board needs to be replaced?
Well done
Good work 😉. How important is the leveling of the vehicle for fridge to operate properly
@rvrepairwoman thank you for your video it was very clear and easy to follow. I have a question please, we tested the ac in between the two wires and we have 120v. But when we test between one of the 120v inlet legs and ground we only get a few volts and the same with the other leg. Our van was imported into Australia from Canada and converted to 240v so perhaps there is a transformer supplying the fridge with 120v and it may not be grounded so we can't get a reference from ground to +. Would this be possible in your professional opinion, thanks.
Great video thank you Mamacita
Thanks!
Great troubleshooting guidance. I passed all of the tests, but purchased two new control boards thinking the first replacement was bad (which it may be) but still no resolution. My problem is that when running on AC, it pops the RV circuit breaker. Could it be the electric heating element is the problem???
You are AMAZING AMAZING and did I mention AMAZING!!!!!
Well explained awesome anecdotes that put everything into perspective.
Love your channel and five stars ⭐️ ⭐️⭐️⭐️⭐️ from UncleJoeGta
😂glad it was helpful!
WOW!! Ive looked at several "experts" on youtube and yours is the best approach to diagnosis Ive seen! What model were you testing? I have a RM3762 and it seems it must be laid out a bit different. I dont have the 6 pin your speaking of to test the board and no orange wire. My issue seems to be no clicking or spark after its been stored. All other devices that use gas work...but not until I drive around for awhile does it finally click and fire. So weird. Wish I was in Vegas Id definetly look you up for service.
Hello Emily I couldn't find the reading you said. you would put out for the reading in the ac heater for refrigerator.
Hey I need a little more of your good help, just watched your video was great, so I am working on my 2008, fridge, same one as in your video. Went through all your steps, twice lol, my heating element is getting hot, on gas and electric, but fridge will still not cool, or freezer, it just runs for half an hour, then pops the heat switch, but I noticed my cooling system is not getting hot, would that mean I need frion added?
Hello again Badass Emily :-) So I was able to get the fridge going. My freezer is working. The fridge is not cooling yet. Does the thermistor only work for the fridge? Is it possible that mine could be bad? Thank you again for your amazing videos and help. I appreciated your text back so very much!!! Thank you so very much!
Could you do this exact video on a Norcold Model N10DCSSL, Please.
Thanks a hole lot
SUBSCRIBED Thank you ❤
My fridge a domestic works but not getting colder than 45F…thermistor? Great video!😊
Great video! I went through the process, and my meter read that my 5A glass fuse on the circuit board didn’t have power on either side of the fuse, but the 3A fuse to the left of it had 12 volts on each side. However, when i took the 5A fuse out to test it, it had continuity and looks totally fine. Any ideas?
My fridge died super recently, right after my batteries died (and i think the batteries went below the discharge limit) It’s a DMR702, and the error code it’s blinking says that DC voltage is out of range, but i’ve replaced the batteries, confirmed that they are working, and reset everything, but still no luck.
thank you for all. I have a problem on my mother board 220vac europe version and the motherboard is out production. The fridge work only on 12vcc and gas. The mother board doesn't recognize the 220vac supply. I want to connect the 220 ac resistance directly at 220ac wire with a fuse to protect it and i can start manually the fridge with a manual switch and a thermostat . Thank you and greetings from Italy
I have a 12v dc 10 cubic ft, The power from the fuse goes to the Main PCBA Cooling unit, however it does not return to the main control board on top of the fridge. It is not a wire issue, the 12 volts does not exit at the tab where the return wire terminates.
I have a Nicole de0751bb, it’s gets ice cold but I can’t turn the temp up at all so drinks don’t freeze, is there a way to repair the thermostat or get it to work somehow, part is discontinued. Thanks so much!!!
Hi I have a 2005 rv w dometic refrigerator and I have a problem when I try text the ac power from the circuit board using the common ground I only 70 volt a/c
What if my 5amp fuse keeps blowing everytime I turn power on to my fridge
A hot tip she didn't mention was checking the test buttons on the bathroom outlet. Apparently it disconnects multiple outlets and kids like pushing them. At least I'll be ready when it really does break.
Yes! Great tip! If you aren’t getting power to the outlet that the fridge is plugged in to then that GFCI (the button in the bathroom) is the first thing I would check.
Question…what if I get the long “check” beep in both electric (auto) and gas settings? Would it most likely be the circuit board?
Well I am having the issue of no power at the fuse on the circuit card. Fuse is good, just nonpwer on either side. Have power everywhere else. I have a card coming as it's the only thing I can think of that would be the issue. Thoughts?
Hello Emily, I am hearing chatter coming from the back of my Atwood water heater GC6AA-10E. Would I be right in suspecting the relay. Thanks.
Hey there Emily and friends! Quick question, when I do the first step of touching the black to ground and the red the 12-volt, it blows the fuse for my fridge. Any ideas what this could mean? Thank you so much!
I was watching this to see what the "DC element" was. I'm replacing the board with a Dinosar P-711 and it is so confusing because the schematics in the cubby hole is different that the board that has nothing labeled with the tan resin all over the board which is different than the P-711 so as I find things out I lable everything and drew up my own schematics of the non labeled board so when I figure it out I can replace it correctly the first time. Oh and I had to make my own ground wire so had to get all the fun equipment for that and "flag" connector stuff. A month later I'm here. Almost ready but not sure what the DC element is or how to find the positive end with the board bad.
hey according to my parts list the electrical heating element is 295watts would a 325watt work it's all I can find?
So if the big metal pipe on right is getting hot, the fridge should work? What if it is hot but the fridge is not cooling?
What setting do I use on the volt meter to see the DC volts ( in the first example you showed to check)
I have a Dometic RM2611. The freezer is 8 degrees but I can't get the fridge below 41degrees.. I've been switching back and forth between the original and a Chinese thermistor with no real difference. I have lower and upper fans in the outside compartment that worked awesome last year. I only use propane. What am I missing?
Emily, Help me!! 😅
My fridge is working fine with gas but, when I try to use it with electricity, my gfi outlit trip. i tried different outlit and it does the same.
Same with the fridge connect with an extension cord directly to the house.
I'm kind of clueless. Everything was working fine last fall.
What about if everything works except for the inside light. Bulb looks good
I am getting the pilot to light right away, but the igniter keeps clicking. it keeps clicking through its cycle then shuts of, which shuts off the gas.
What would cause the igniter to keep click, even if the pilot is lit??
Hi any instructions to do this on a dometic fridge freezer model 7271 , desprate owner here 😢 , thanks.
I have a different problem my refrigerator is on and running on propane but doesn't get cold much
So what if we hear the tick, tick, tick but no sounds of the propane lighting? And then sometimes get a big "woosh" sound? My fridge keeps doing this on auto and on gas. It's a Dometic DM2852.
I keep blowing the 5 amp fuse I checked it it's saying like 50v ac btw this happened after the lights went out during the hurricane I'm using the electric non gas atm btw the fuses that blew were when i had it pluged into the outlet behind the fridge havent tryed to put a fuse in while actually connected to the outside outlet