Say Goodbye To Stringing Forever - 3D Printing Tips!

Diamondback V6 Compatible nozzle: amzn.to/3DQJTP8
Wood PLA Filament: amzn.to/3XoWq3g
Temperature tower files: www.printables.com/model/3981...
Are you tired of dealing with 3D printing stringing issues? Look no further! In this video, we'll show you how to eliminate stringing problems and achieve perfectly smooth 3D prints every time. Our expert tips and techniques will help take your 3D printing game to the next level, with no more frustrating and time-consuming clean-up required. We'll guide you through the troubleshooting process and show you the best ways to adjust your settings using a temperature tower to optimize your printer for flawless prints. With our help, you'll say goodbye to stringing forever and achieve the high-quality 3D prints you've been dreaming of.
🖨️ My 3D Printing Gear: kit.co/AllYourTech/my-3d-prin...

[@user-hg8sw2jn6s]

Thank you for the useful tip and keeping it short. Loved it

[@jackhammer_au9961]

Hey that’s a great tip! I’m new to 3d printing and this is excellent advice. Cheers!

[@ALLYOURTECH3DP]

Glad it was helpful! Thank you so much for watching!

[@WaveGenre]

Thank you so much man, you helped me improve my Prints. cool dude!

[@pennakira]

thank you for the video, also check retraction speed. their is a tower for that too.

[@rrrandommman]

Thank you very much!

[@noneednoneed5752]

Thanks a lot, after 2 months of fight and buying a bed I didn't need, stringing was the problem I had

[@MrKornnugget]

Thanks!

[@spicer41282]

Keep it going! Love the 3D Practical Applications = Hydroponics
INSPIRATIONAL!
Please share with us your proven and dependable supplier for the PETG you use.
Thanks for all your uploads!

[@samiraoyuncusu1090]

Great video man 😊

[@ALLYOURTECH3DP]

Glad you enjoyed!

[@toetie2019]

​@@ALLYOURTECH3DP Hey! Are you ever planning possibly make a comeback? I really appreciate the down to earth vibe you give to it all, your honest impressions and thoughts

[@IndianaGraphics]

New Sub. My Bambu X1C arrives Tuesday. So I am watching your channel…😅

[@ALLYOURTECH3DP]

How exciting! You are going to love the Bambu!

[@robertfoster7244]

@@ALLYOURTECH3DPDo you have a Bambu X1?

[@pwnagers]

Did you test this file on your X1C or did you need to find another file? I need to test this when my current print is done. Just not sure how and if its only for prusa. New to this :)

[@joshfoley8862]

That's amazing. Thank you so being so cool concise and staying on topic!!

[@vaughanza]

The problem with such a low temp is that the part breaks / splits easily . The becomes weak , so what's the solution ?

[@lifetrekerking]

direct drive

[@crystaloren1421]

How do you do the tower?

[@tracywilson823]

Tempature tower awsum but at what the speed?

[@shopyourlikes]

Wow!

[@ALLYOURTECH3DP]

Thanks Namona!

[@shopyourlikes]

@@ALLYOURTECH3DP Thank you!

[@romanvarecha2240]

Great video, thank you but, where can i get those temp towers stl,

[@soupbean2778]

Did you ever find it? I need it too.

[@romanvarecha2240]

@@soupbean2778 in cura go to the marketplace and there go for extension and then autotowers. Here you will have plenty of auto tests.

[@xscitobor1233]

how do you get them to print at different temps in the same print?

[@ViridianFlow]

It's all part of the gcode. It'll do the layer of the tower then the gcode changes the temperature before doing the next layer

[@V-Angel]

Is the temp preseted or I have to doit manually at the slicer ?

[@ViridianFlow]

@@V-Angel Depends on if you find a gcode for your model of printer.
The better option is to use something like Orca Slicer, which has a bunch of calibration towers built into it. Just open a new project, look up top for the calibration menu and select temperature and it'll make you a temperature tower for your specific printer.

[@xscitobor1233]

@@ViridianFlow do you know if flash forge has that capability or if Orca slicer can be used with them?

[@mr.critic]

nicee

[@ALLYOURTECH3DP]

🙌

[@jumpathy_dev]

come back