1938 Kustom Cadillac: Ian Gets This Caddy Ready For Victor's Arrival ⛳️ Part 2!
Вставка
- Опубліковано 18 кві 2024
- 1938 Kustom Cadillac: Ian Gets This Caddy Ready For Victor's Arrival ⛳️ Part 2!
This project was introduced on Full Custom Garage and now a very special client is going to take it all the way to custom completion. Ian and Victor go a long way back, and Ian knows how to get ready when his old friend and client pays him a visit in his shop. Ian does a little more slicing and dicing and envisioning of his own to get ready for a creative brainstorming session with Victor.
Here are a few videos from Victor's showroom of art/cars that he and Ian collaborated on.
• Full Custom Ian Rousse...
• Full Custom Ian Rousse...
• Ian Roussel SEMA Show ...
IF YOU ENJOYED THIS CONTENT
🛸SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
Follow Ian and Jamie on Instagram👽👽
@Full_Custom_Ian
@Mrs_Roussel_
Our Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
Music:
slip.stream/tracks/b7062d4b-e...
We also have an Amazon store for you to shop some of the basics we use at our desert ranch!
www.amazon.com/shop/fullcusto...
👩🏻🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻🎨Intro and Outro Animation Done By The One and Only
@corvette.mike on Instagram
#cadillac #full #custom #garage #classiccars - Авто та транспорт
Happy Friday! We are SOOO CLOSE to 100K! Who is it going to be? Who will be the 100k Subscriber? You or you? We are happy to be collaborating with Victor on our UA-cam channel! Some may not love him or his ideas...but be kind, we don't tolerate bullying or negativity towards our friends here! He has a heart of gold and a showroom full of cars that have taken 1st place in many car shows! Journey with us and have fun! I linked the videos to his showroom in the description and at the end of this video for you to check out! Next up on Sunday is an #envisioning session with Victor and those of you that aren't familiar with him on Full Custom Garage, well you are in for a treat! Have a great Friday and we will see you on Sunday! ~ The Roussels 👽👽
You are a mad man ; and a great artist 😎👍
Remember to measure twice and cut once.
Who doesn't love Victor? Shame on you.
Can’t wait!
Move over Eric. Victor is god.
The long nose is what it needs. No one ever leaves the long nose anymore but once you see one with it, it draws you in.
I'm with ya !!!
The long nose is what makes this car. Looks like a car I remember from an old Woody Woodpecker cartoon that a wolf in a zuitsuit drove.😂
Yeah, and a nice strip of trim from the flying lady all the way up the center of the hood to the center post of the windshield would be elegant.
And a straight 8 motor !
Can't wait to see Victor again. Love the way you and Jamie carry on.😂
I’m just the opposite , i can hardly stand it when someone has a little money and cant make up his mind about anything , it goes on and on and on… 😮😴😷
Ian and Victor. A dynamic duo. Love you guys together. Best of ideas.
I can't wait to see Victor and Ian work together "Live" I enjoy your UA-cam better then the show as we get to see the full build. As always great work Jamie for all your questions and great work.
Jamie, just to let you know your camera work and editing do not go unnoticed loving it!
The Duvall windshield would look great, I wonder why the car rejected it ??? LOL I haven't seen Victor since the other show. It will be good to see him again.
The Duvall style windshield is the way to go
I agree the long hood to me is what makes the car stand out the Duvallstylewindshied makes it stand out even more that being said Ian does a lot of things that i dont agree with till he gets finished with it then I realize after seeing his way is the reason why he’s the best
Man, Ian is just a metal magician
Jamies laugh is addictive. 😀😃😄🙃😄. Another fine job ian and jonie 👍
You know the Dude is still giving you inputs on these builds. He knocked over your windshield center peice is protest! He is now the shop angel inspector!
ANYONE ELSE NOTICE THE GUAGE GOING UP AND DOWN WHILE IAN WAS GRINDING THE A PILLAR HAHAHAHA
Yep
Could Caddy Wack be Christine's long lost cousin?
🚀😂👍
Boomer's 1st time on the internet
-ALL CAPS
@@DIARRHEA-PANICnow thats a boomer comment
Brilliant Ian UK watching 🇬🇧🙏
Anyone besides me love the music in these videos?
Me!!! 🙋🏻♀️ ~ Jamie
Always diggin the tunes !
Always loving the tunes.
Ian is hamming it up and loving cutting up the caddy before Victor arrives. Thank you Jaimie and Ian for another great video. Congrats on the 100k subscribers!🎉
Chef kiss 😂 breaking the movie magic windshield
love the loooong nose on the car with that centre piece swept back low, getting strong great gatsby vibes from it
Alright more Jamie and Ian what a way to start the Day
Ian I think you should call it whacked caddy cause you whacked it, chopped it sliced it diced it. Still very awesome and I would be happy to park it in my garage
So glad you’re working with Victor!
Thanks for the tips Ian. I would really like to see you cast the front windshield surround. I have never tried to cast my own parts before. Maybe 3D printing. lol. Thanks for the video Jamie.
Victor is one cool guy. His creativity is always spot on in the end.
I loved the look of this car before the top was removed :(
Congratulations on hitting 100K subscribers Ian and Jamie!!!!!
Jamie is a veteran..thank you for your service..Semper Fi
The magnet is an earth magnetic. Super strong like you Ian
That straight edge/long sanding block piece of metal now also works as glass remover
😂😂😂😎
So close to 100k
Automotive Art -
To error is human
To repair is divine
To make all mistakes into Art - is FRIGGIN' AWSOME TALENT. We are watching a master at work - thank you BOTH for sharing!
I can't wait to see Victor in the shop with you and jamie! I want to see what his demeanors like, when he's not on camera so to speak. ❤😂
This is CaddyWhack, Ian cut right through the wiper stand...😂😂😂 I LOVE THIS SHOW!
Ian! Whats your decision for a new windshield? How about "DUVAL" Windshield?
That magnet would pull the steel piece in my hand through the skin 😯
Jamie is a veteran? Thank you for your service, young lady. Staff Sergeant V.E. Hoke USMC 1976-1992
🏆I would like to cruise in that🍀Ride👀✌️
Looks awesome Ian!
I like the long front end with slope windshield.
Профессионал !!! 🤝👍👌🤘
Yes, rumble seat. Great idea!
I love the long hood on it, makes it classy. You'll have to hang the UA-cam plaque where we can see it in the shop somewhere. 😊👌
Philippines is watching you
HUGE CONGRATS on reaching 100K subscribers and so looking to seeing Victor again the man knows what he likes and does not accept anything less your right Jamie some people dont like that but for me i have nothing but full respect for the man
Nice show. I'm always so happy to see your channels notification pop up 🎉❤
Glad you enjoy it!
Me aswell, it's like medicine to me.
That DuvalL windshield is definitely the way to go. I know you were concerned that it made the front end. Look too long, but I kind of like that. It’s kind of elegant. I definitely, definitely love the idea of the boat tail. There is something about a car with a boat tail that just screams elegance. I think what you will end up with is a hot rod with elegance which is something different that I have never seen. Thanks for another great video Ian. Blessings to both of you from England.
Congratulations on 100,000 subscribers. 🎉 I really enjoy seeing Victor and you working on projects.
Jamie’s sense of humor’s a plus✅
I think Victor is going to love it.
Excellent 😊
I need an entire hour of Victor and Ian just envisioning!
Tomorrow! It’s a fun one
Love the long nose !!! Definitely has character!!!
'Attempting anything you see here is at your own risk' *Ian whistling*. haha
Another fun project watching this one come together it's going to be interesting thanks
Congrats Ian and Jamie, I opened this one up to view and noted 100K subscribers. Bring on the Plaque, you guys are metrically legit...👍
Ian Is a professional metal butcher!!
Do try this at home!!
Hi you two!!! Love everything that you do!!!!
I dunno? It’s say’s 100k on my screen!? 🎉🎊💥👌🏻👍🏼👏🏻👏🏻👏🏻 congratulations!! Loving everything! Hurry up Victor and get here with your demands!! Can’t wait! Good stuff!!
I think you're on a way to a winner here Ian 👍 can't wait to hear Victor's input 😀👍
Oh... My goodness your channel is now officially over 100k subs... A wonderful achievement by the channel! 🎉🎉🎉
CONGRATULATIONS!
On to the NEXT MILESTONE... 1 MILLION SUBS! 📢🥁‼️
Theres actually a pot- metal "weld kit"...Muggy weld....works awesone
Love the long nose, really awesome, and looking even lower.
Congratulations on hitting the 100K mark!!!
I think Plymouth back in 1953? had a bumper that was ribbed along the width. That might look good on the Caddy.
Happy Sunday ! Tuned in this morning to watch post and see you guys hit 100k !! Congratulations 🎉🎉🎉🎉. Keep it up 👍
🎉
Thanks 😊
Thanks for your service Jamie. And beyond in EMS/hospital where mine was for 33 years. My fav/lucky number is 9 also, Ian. Saw Victors arrival video already. Brings back cool fabrication memories.
I would suggest Victor and you check out the Delahaye 175S Saoutchik roadster. The windshield design would work perfectly on this project. Plus this is the most beautiful car ever built.
I have used "muggy weld" to weld pot metal like the hood ornaments and grills. You can even weld steel to pot metal and it will hold up.amazing stuff. Jack from Missouri
Love the show !
Never got to see what you did with the custom body on Victor's Porsche. Would love to see an episode on that.💯
Keep up the great work ‼️🍻
What's really great about how you fabricate is how raw it is. No fancy tools, no million dollar shop, just basic tools, imagination and talent. Your creations are just as good or better than these "professional" fabricators. Plus you're more fun to watch.
Yes he's very resourceful..
100k subscribers! You did it!
Ian The windshield Laid back was cool and see what Victor has in mind Sorry Dude But the start was Awesome TCOMITY
I like the frameless windshield idea
congrats on 100k, hope youtube showers you with blessings 🎉😊
Following with interest. Have a good week and congratulations on 100,000. Marc from Australia 🇦🇺
Thanks a million!
Diggin the 🏄 🎼 vibe
Because I hear it helps you because I look forward to seeing every episode. You and Jamie are a great team and I enjoy watching you guys create?❤ That's why I comment and like and of course subscribe. Keep up the good work
Jamie is such a welcome addition to watching Ian work! Throw back in "the Enhancer" and this going to be even more fun! Can't wait! 😊👍🙏🙏
Ian , You Will be pleasantly surprised. That car is a gem. Congratulations!!! Greetings to all!?!?
Awesome looks great
I love how Victor thinks. He is a true artist. Happy Friday
Awesomeness 👍
Jamie, the sound for the broken glass is added post production by foley artists. Today it's all digital but back when westerns were popular, they used people who made the sounds. Like the sound of an arm breaking is done by breaking a celery stick.
Let's get to cutting then !!!😮
I am SOOO looking forward to seeing Victor!
Might be cool to have that detail under the headlight continue down over the bumper.
Looking good 👍👍
Waiting to meet Victor
Thanks for Sharing... You Make Everything Look Sooo Easy. Because of Your Skills and Experience.
Laid back screen and a boat tail, plenty of plush leather inside, beautiful!!
Congratulations on 100,000 many more to come.🥇🌟🌟
Awesome
You guys are the best happy Friday
Happy 420 it's Friday Peace Love Ace out
great EP!!!!!!!
I liked the way it looked before but it takes on a completly different look now. I looks simular to one of my favorite cars, a triumph tr3. Would love to see the same style doors as the tr3.
This is an awesome car
Congratulations on the 100,000 subscribers you deserve it thanks for sharing
One amazing man to watch ....
Is there a party when you guys reach 100K Congrats you deserve it.
I was wondering about Victor the other day. It will be good to see how hes doing and what hes up to lately.
Best episode yet. Thanks