Simple DIY Bluetooth Speaker

Kits, specifications, soldering schematic, and more are available here - www.aukits.com
Follow me on Instagram - / aukits_diy
Hope you enjoyed the video! I will be posting updates on Instagram, so be sure to follow me there for new stuff.
Songs used (in order):
Pableno - Matemáticas
Dylan Sitts - Stood Up
Molife - Nite Glo
Tilden Parc - BLK BOY JOY
Timothy Infinite - Green Smoothie
Ooyy - Come 2gether

[@jcracoustics]

Great video as always mate! Like how you've updated the way you hold the electronics now, much cleaner.

[@madalindragu]

So beautiful construction with that little pieces! Love it!

[@DIYDK]

very good you do it very well

[@Darkedition7890]

Good sound quality 😍😍🥰

[@hasanbillah101]

Wow so cool presentision 😉

[@Pauiistano]

Tentarei fazer uma nesse estilo.obrigado❤

[@LeeSangLVS]

very beautiful

[@3rutu5]

love your work mate, i just finished my beer can (on here) using similar parts, but a 2 inch driver. One question i have, have you considered changing the usb-c breakout board to the one where the PCB is the same width as the USB-C connector? I'm aware it may slide out, but i found some careful placement of superglue holds it perfectly. Really like your extra wood guides in lieu of hot glue as well.

[@aukits]

thanks! I did not find that necessary, it does not change the functionality, so a wider one works just fine.

[@anandhu.s5900]

Nice❤️

[@cino6173]

Hello, we are currently working on your box and our DC-Output is constant 3.6V DC and we can't change it.. any idea?

[@n.projects]

Bom demais!

[@Ttvyeet]

And how much would you sell it for

[@mr.arafat2792]

woow soooo supper

[@ahror_abrayev]

👍👍

[@kenstumaudio]

👍

[@madhavarammidhunreddy5395]

can any one give me model numbers of the components used

[@Videoseminars]

that is very neat )) is there a point in your bt+amp board to solder line in from mp3 player board?

[@aukits]

thanks! yes it is possible to do, you have to look up the pinout of qcc3003 for line_BN and BP

[@Videoseminars]

@@aukits but then your custom dsp settings woundn't be active for playing from the tf card or flash , if I get the topology right?

[@aukits]

@@Videoseminars I was playing around with aux input a while back, and I'm 90% sure it did have EQ effects. However, those pins are hard to solder to, might require additional ADC board and such small speakers have little use for an aux, so I dropped experimenting with it

[@sergejjevsejev1161]

Greate work! Tell me please something about battery, what are requirements to it?

[@aukits]

Thanks! Battery type: rechargable 18650
capacity: 2200 - 3400 mAh. I'd suggest going with the ones made by samsung/LG/panasonic as they are reliable

[@sergejjevsejev1161]

@@aukits Wich amper to choose? 5A, 6A, 10A...?

[@aukits]

@@sergejjevsejev1161 it should be above 3A

[@sergejjevsejev1161]

One more question: is this speaker stereo or mono?

[@aukits]

@@sergejjevsejev1161 It is stereo

[@yilmazozan9607]

Can you specify the dimensions of the box in the video please

[@aukits]

can't change the video, but the speaker is about 186*45*61 mm

[@sadecetamir]

When the kit's battery die, what we can do?

[@houssemeddine2275]

You replace the old one.

[@justsomeguywithsunglasses1876]

this sounds better than the marshall emberton

[@NTT.07]

Đẹp bạn ơi

[@Random_4400]

Very Very expensive though my man

[@LuigiPreciatto]

Cool! Do you ship to Mexico?

[@aukits]

thanks! we do

[@sedrickwells8545]

Nice but 74 bucks for some I have to put together myself is a bit much

[@dika_sta6865]

Di jual gl bok nya

[@Mr.Engine993]

I think the speakers are out of phase but other than that it's great

[@Kart0nas]

They are in phase, otherwise the passive radiator would not move at all:) thanks!

[@Mr.Engine993]

@@Kart0nas thanks I didn't know that :)

[@Ttvyeet]

I was about to buy a kit but I bought a JBL charge 5

[@SuperIUPAC]

Including connecting wires in the kit?

[@aukits]

No wires in the kit. Assuming you have a soldering iron, it is pretty likely that you'll have wires too

[@jarrodsometimesusedtomakev6412]

@@aukits what gauge wires do you suggest using?

[@aukits]

@@jarrodsometimesusedtomakev6412 9:57 in the video. 20-18 AWG

[@t_e_j_s_999]

ઠંડી

[@quangduy6354]

I would buy a speaker instead of that kit :v

[@user-os4nn3mq7o]

🤩🤩🤩🤩🤩🤩🤩🤩🤩👍👍👍👍👍👌👌👌👌👌👌👌👌👌👌👌👌👌

[@user-li4io7ui2c]

Тот случай,когда самого богатого актера в мире нахуй никто не знает.

[@Vertik]

A speaker for 20 bucks worth 74 bucks.

[@3rutu5]

you'd probably find that the drivers alone are 20 bucks.....

[@davidcorduneanu5246]

@@3rutu5 which drivers???