How to make a 40 000 mAh 144W Power Bank using 21700 3.6V Li-Ion Batteries
Вставка
- Опубліковано 27 сер 2024
- #ErCanEverything #DIY #PowerBank
🔋⚡In this video I will make a powerful 40,000mAh 144W Power Bank using 21700 Li-Ion cells and 100W Super Fast PD Charging module.
📌5000mAh 21700 LiitoKala Cells👇
s.click.aliexp...
⚡PD Fast Charge 5A 100W Type-C USB Charging Module
👉 s.click.aliexp...
📌100W Type-C USB OTG Charging Module
👉 s.click.aliexp...
🔥How to make a Portable Spot Welder for Li-Ion Batteries using 8Ah Cordless Drill Battery
👉 • How to make a Portable...
💥DIY 20 000 mAh QC3.0 Supported Parkside Power Bank from 20V 4Ah Parkside Battery! Just for $1
👉 • DIY 20 000 mAh QC3.0 S...
💥How to Convert 12v 7Ah Lead Acid Battery Into 12v 16.8Ah Li-Ion Battery Pack and 50400mAh Power Bank
👉 • How to Convert 12v 7Ah...
💥DIY Ultra Compact 8400mAh PD Power Bank
👉 • DIY Ultra Compact 8400...
💥How to Convert Old Laptop Battery Into 16200 mAh Fast Charging PD Power Bank
👉 • How to Convert Old Lap...
Stl File👉 mega.nz/file/6...
Oh well, the old IP5389 IC. Those boards with that IC are notorious for not being able to reach 100w, especially without any heatsinks. They output around 90w max. Furthermore, the coulomb counter built into it needs to be input the initial capacity of the battery. The resistor R8 will determine that. I guess you used 4000mah cells, so you fall short of the default 10000 for a single string in a 2p configuration. That means your board will stop discharging when the display shows around 15%. You need to replace that resistor with a 10k if your batteries are 4000mah. Just divide the total capacity of a single string of batteries in mAh by 0.8 to get the required value of the resistor. I also recommend changing r20 to 27kohm, which will limit the power to 65W. It can't output 100w anyway and will keep resetting, possibly damaging itself or your equipment.
Very well said. I can confirm that you're correct and that you're familiar with the module as the things you said were the same in the description and guide for using the module. I hope he listens and does the necessary modifications.
What I don't know is how I can. R8 power bank with 50000mAh capacity
@@user-pg9bg5yc4x I don't understand your question
Thanks you I was planning to look into 100w and this info is very rare! Do you recommend/know better modules without a fault?
This module is great! 🤩
Also the battery pack looks very good!
Awesome video as always 👌
Thank you Brother🙏🙂
Do you know what I liked most about this module?
You can charge this 20V package using even a 5V charger🙌
@@ErCanEverything😍 definitely i have to get one.
Thanks Brother ✌️
In your every video your soldering quality is just awesome, I like it, you are a soldering master.
Thank you my Friend🙏🙂🤝🍀
@9:00 lol interesting you opted to do it this way rather than solder the wires to the PCB first which would be waaaaay easier! guess you like a challenge! 🧨 you also really sealed the box tight - I would definitely prefer to be able to change out individual cells as they die - rather than planned obsolescence from the get go!
Классная вещь!
Very Good My Friends 👌👌❤️
Awesome video again ! Thank you!!!
Thank you my Friend🙏🙂🤝
3:25 Nikel şeritleri punta yapmadan önce pozitif kutupların altına ısı yalıtımlı arpa kağıdı kullanmanı tavsiye ederim.
Oring şeklinde hazır kesilmiş kendinden yapışkanlı olarak satılıyor, hem de gayet uygun fiyatlara..
Powerbanklar yer çekimini çok seviyorlar nedense. O yarım kilodan fazla olan batarya yanlışlıkla elinden kayıp düşerse olacakları düşünemiyorum bile..
내가 찾는 게 여기 있었네요 ^^ Thanks~
Hocam tam da ihtiyacım olan şeydi, uygun fiyata şarj boardu arıyordum, harikasınız 👍🏻
Teşekkür ederim.
Board gerçekten de çok mükemmel çıktı.
3S, 4S ve 5S Pil destekliyor, bu da şarzı hızlandırıyor.
Well done my friend! I see that you have utilized the cells from the dead power tool battery. Great job!
Thank you my friend.
Instead of them sitting on the shelf I decided to use them this way🙂🤝🍀
Gratulujem k 100000 odberateľom👍👍👍
Thank you my Friend🙏🙂🤝🍀🍀🍀
very nice powerbank. I also built a similar one with an almost identical PCB. Is BMS working for you properly with this one? For me, it does not balance the cells at all.
Today is the second day of using this Power Bank and I'm still testing it and I can't say how the balancing is so far🙂
@@ErCanEverything ahh okay. Will you make a video after testing it? I'm very curious about the results. My PCB is from TZT and have only one Type-C port, has a DC and micros USB input but everything else is the same and i think yours could be an improved version or a version B. I could only draw about 90W from my power bank but I will test it again soon. I hope i won't fry it.
5:34 What are those things that he uses that spark when he presses them down to connect the metal to the battery. Are the necessary for the build or can you just use some plain copper wire and some solder. Anyone know???
This is battery spot welder
ua-cam.com/video/GTcfRqx7ub8/v-deo.html
But in this video I used a copper wire and soldered them. But it has to happen very quickly or else you can damage the cells
ua-cam.com/video/2xirwLUWW-U/v-deo.html
Great job broo 😍😍😍🔝🔝🔝
Thank you my Friend🙂🤝🤜🤛
Good work broo 😍🤜🏻🤛🏻🙌🏻🔝🔝🔝
Thank you Bro🙂🤝🍀
I know this seems like nonstop criticism but you really need to do the math on a 5S2P pack outputting or inputting (getting charged with) 100W. You're going to be really pushing the limits of safe charge rate if you charge those with a 100W charger. With a 2P pack you're probably ok on the discharging current so long as the cells are rated for 10A which in the real world means they won't get too hot at 6A or 7A. SInce you're only demanding 2.5A-3.5A per cell you should be ok but I'd be concerned about using one layer of series nickel plated steel. My rule of thumb is if the intended use is to draw more than a couple amps from each cell then it HAS to be pure nickel and 0.15x8mm is my thinnest material. That stuff is good for 7A to 15A depending on the charts you look at. I think 10A is a perfectly acceptable number and 0.20x8mm can handle 15A no problem....20A is pushing it. Double layering nickel isn't perfect but it does work in roughly halving the extra resistance you get between the cells from the connecting material. Nickel plated steel has been 1/4 the conductivity of pure nickel in every test I've done...and pure nickel is 1/4 of copper...1/16 or 6.25% the ampacity of a similar amount of copper is just scary to me. If you base the calculations just on pure nickel vs plated nickel then 0.15x8mm plated nickel is good for 2.5A per series connection. On its best day its good for 5A....
Hola, me gustan mucho tus vídeos y aprendo. ¿Que spray usas después de dar el pegamento
Gracias
Well done sir, as much as I'll like to do this I'm still having problem with how ill get the casing and what you used to join the cells together. Please help me out
Tebrik ederim cok guzel calisma sizi yeni kesfettim vidolariniz kaliteli. Elimde 18650 piller var buna benzer bir calisma yapmak istiyorum bu modulu nereden alabilirim yada buna benzer daha iyi bir modul onerir misiniz? Aslinda benim amacim gerektiginde telefonlari sarj edebilmek gerektiginde de modem veya cocugun akulu arabasinda kullanabilecegim (12 v 7amper) bir guc kutusu olusturmak istiyorum bu konuda oneride bulunursaniz cok sevinirim. Basarilarinizin devamini diliyorum...
Teşelkür ederim Dostum🙏
Kullandığım tüm malzemelerin bağlantılarını videoların açıklamalar kısmına eklerim her zaman ve orada bulabilirsiniz bu modülü.
Çocuk aracı pili için bu videom belkibfaydalı olabilir size: ua-cam.com/video/2xirwLUWW-U/v-deo.html Ancak bu pili şarz etmek için 12,6V veya araba aküsü şarz aleti gerekir🙂
@@ErCanEverything teşekkür ederim
Great module, this can be used with extrenal bms? Connected only: B- B+ and ntc termistor? 18650 5S2P
C’est excellent merci beaucoup pour l’exercice
Tu fabricaste la carcasa o la compraste?
I would've made the lid snap fit so that you can take it apart if something goes wrong and need to replace something.
Excelent project instructions! congrats. Where/how I can get the box and the board?
It's not quick charge when 2 devices connected
Excelente video, ¿en esta fuente se puede conectar el soldador GVDA?
Muchas gracias
How I can purchase this module?
In the description there is a link to order from Aliexpress🙂
Make them again and the cover must be screws not super glue so it will be easier to repair
Many Thanks
Да повер банк агонь🔥🔥
Parkside cell's 👍
You right🙂
if i use this 60w power draw for 1 hour is it safe......this power bank module will toasted or not......
So nice 🥰🎶
Золотая банка получается! 😱😱😱😱. 8000р
Atleast you should provide the product link in description or tell about the site from where we can buy these batteries or other products
Hi sir. Does the 100w charging module will still work with 4S 32750 battery? Please enlighten me sir. Thank u in advance.
Wow😊
Şefim o pilleri nerden ucuza alabilirim ?
Ye wala moudle hame lena hai
Are you from ?
I want thish products
Or all parts how to buy opition
Please reply
In the description I left a link to order this module
What is the total cost bro
HOW CAN I GET THIS CASING/BOX???
have any online shopping site????
Nice video
Thank you my Friend🙂🤝🍀
das sind keine 40 Ah sondern 8Ah und 18V die Akkus werden als 5s 2P konfiguriert und nicht als 1s10p denn dann wären es 3,6v und tatsächlich 40Ah so oder so es bleibt die gleiche Energie mit 144wh was durchaus beachtlich ist .
Is it ok to charge a gaming laptop that has a charger im using 19.5v 6.15A 120watts?
Can a 4s version of that charge a laptop ? Thank you
What pc board did you put in. The model number please.
Please check the description, I left links there🙂
Thanks
bro... is it possible to assemble the battery using 21700 for your spot welder's power input sir??
The 8Ah battery that I use in the spot welding machine is made of exactly such 21700 cells🙂
sir... i want to ask you. why is my spot welder my battery is full charger. but on the screen it says LO. Thanks
You make a Spot Welder like mine and it shows LO right?
@@ErCanEverything yes, like yours... now I use my spot welder it doesn't say low anymore... but now my spot welder has turned off the screen and I have to open it again and plug it back into the battery so it turns on again... but like. it keeps turning off again and Again
do you have facebook, instagram or whatsapp sir... i want to send a video so you can tell me what i did wrong..
@@vick_garage Instagram @ercaneverything
Does it support 65w wrap charging?
This battery module actually supports up to 60W, but I don't know the exact parameters and I will soon buy an good USB Tester.
They make insulator rings ya know
Mobile is charged with 33 watt charging, will it be charged with power bank?
What kind of tape is that?
Bro can you share the link and I'm buying module 😊
Tape link?
Which tape
Can I use 18650 5A?
А цена этой платки???
Овчинка выделки не стоит.
Зачем Вы обманываете людей. В режиме последовательного подключения аккумуляторов складывается напряжение но не емкость Ампер. В Вашем варианте сборка будет иметь всего 10000 мА. Зачем такие громкие названия ролика?
Why should I mislead you?
Everything is written 18V 8Ah which corresponds to 40Ah Power Bank
What model of smartphone first connected to charger?@@ErCanEverything
100W module name ? model name ? plz
How are you able to import
144W? Not on its best day. 65W PD output was as much as I could get out of it.
144Wh is the battery capacity🙂
@@ErCanEverything So why put 144W in the title?
W≠Wh just like A≠Ah
It's 8ah not 40.000mah
I can tell you that this Power Bank is 144W, calculate it as you want.🤷
An 10 000mAh Power Bank is only 37W😉
Mere mobile 📲 me 33 what ki charging lagti : Power Se charging ho ga bhai please 🥺
I can't understand what you're writing
Bro tap buy link
What is the Tape Name ❓️
tesa tape 51036
👍👍👍🥇
Thank you my Friend🙂🤝🍀
👍😉👏👋👋
Hello my Friend🙂🤝
❤❤❤❤
👏❤️✌️👍⭐️
Powerbank charger 🤔🙄 how to charger
Not 40,000 mha it is only 8,000 mha
Yes or no
18V 8Ah
3.6V 40Ah and is equal to 40 000mAh Power Bank
Thank you for toking ❤❤
Should have re wrapped those batteries. So much cringe over the damaged battery wraps. PLEASE PEOPLE DO NOT USE BATTERIES WITH DAMAGED WRAPS. TOO MUCH DANGER WITH EXPOSED CASING!!! Please for safety reasons re wrap your batteries. Never use a battery with damaged wraps!!!
40 000 mAh ?? No. 4000mAh yes.
it is 8000 mah. two parallel rows of 4000mah
🔝🔝🔝🔝🔝
Thank you my Friend🙂🤝
👀👀👀👀👀👍👍👍👍👍👍👍👍
You wasted 4 minutes to show how you packed some batteries, horribly. 4 more minutes to connect those...👎
Is wrong you title of video and
It is a total lie, even if the balancer is 100 AMP and the batteries are only 20 AMP, the output you will only have will be 20 amps. The capacity of a powerbank is given based on the capacity of the batteries, not the BMS. If not, I would put a power with a battery and a 1000 amp BMS, would it be real? absolutely not and by the way I am an engineer and your formula of 144 w is wrong
U are cheater! 40.000mah not correct! 2s5p=21v 8000mah😅
@istvan_87 True, he is a lying about 40,000mAh.
You're correct, it's only 8000mAh, at 18volt nominal, or 21volt maximum, but this was a 5S2P, not 2S5P battery as you wrote.
2S5P would equal 7.2volts nominal, 8.4volts maximum, with a 20,000mAh rating👍
Which is equivalent to a 40,000mAh Power Bank!
40Ah x 3.6V = 144Wh
18V x 8Ah also is 144Wh😉
Which is equivalent to a 40,000mAh Power Bank!
40Ah x 3.6V = 144Wh
18V x 8Ah also is 144Wh😉
@@ErCanEverything Unfortunitely not.
Your maths may be correct for 40Ah, but since one of your cells is only (4Ah=4000mAh) not 40Ah, you got your calculations wrong by x10.
5x 4000mAh cells in series is equal 18v @4000mAh.
In series the voltage is cumulative but the mAh rating stays the same as only one cell.
In parallel, the mAh is cumulative but the voltage stays the same as only one cell.
2x 4000mAh cells in parallel would be 3.6v nominal, 4.2v maximum @ 8000mAh.
5x 4000mAh cells in series x2 parallel rows = 18volts nominal, 21volts maximum @8000mAh.🤣👍
@@ErCanEverything
Demek ki abdallar sadece biz Türklerden çıkmıyormuş. Apdalın milleti dini ırkı yokmuş 😂
40 amps? Seriously, who do you want to see the silly face of, that at most gives you 8 amps because each battery is 4 amps. what a vile lie and no bms balancer? And even less with that module it does not even give you the 8 direct amps from the battery, what a scam
If you don't have enough concept you shouldn't talk!
This module is built with cell balancer and the capacity of the whole package is equal to 3,7V 40Ah Power Bank!
I did not say that this module can supply 40 or 8A current!
And in the picture you can see that I wrote 18V 8Ah, which total power is 144W. If you want to see my face check the community section!
@@ErCanEverything IT IS SERIOUS NOT EVEN THE WHOLE PACKAGE IS GOING TO GIVE YOU 40 AMPS YOU NEVER JUST PUT TWO BETRIAS IN PARALLEL AND EACH ONE IS 4 AMPS THERE YOU CAN SEE IT IN THE VIDEO WHEN YOU SHOW THEM AND THEN YOU CONNECTED THEM IN SERIES THAT ONLY RISES THE VOLTAGE BUT IT CONTINUES TO HOLD THE SAME AMPERAGE IS 18 VOLTS AT 8 AMPS NOTHING MORE AND YOU CAN INCREASE THE VOLTAGE WITH THE BOSTER UP BUT WITH THE SAME AMPERAGE. HAA I FORGOT TO TELL YOU THAT I AM AN ELECTRONICS ENGINEER AND YOUR VIDEO APPEARED AS A SUGGESTION ON UA-cam AND IN YOUR VIDEO IT SAYS THAT 40,000 mamp
3.7v 4000mA 10pcs
HOT MELT GLUE GUN for batattery conglomulation.
p.s. 3DP and tape, make the maker we hate
I would have used thicker cables for the high voltage .
The thickness of the cables is not important for the voltage, unlike the current.
On the positive and negative outputs, I put thicker ones than the other 4 for balancing, because no large current flows from the balancing cables.
But still, thick cables are always better🙂🤝
@@ErCanEverything Yeah that is wat i was getting at, i mean were most of the Amps go true.
High current.
Why not print with black filament, is a lot less work, and is cheaper then painting it black, i have:
Black
White
Green
Red
Yellow
brown
blue
Orange
Purple
Gray
Then you do not have to pint it, i have most of the colors, even if i almost never use them, it's better to have it than
not have it, and needing it.
You are absolutely right about that!
I decided to do it this way because the quality of the print was not perfect and I had to sand and after painting it was smoother🙂
@@ErCanEverything Aha ok,