Very nice, I really enjoyed watching your video. I’m only starting out at modelling kits & videos like this show me what I should be trying to do. Thank you for sharing.
Thanks for building this kit. I attempted a similar kit and eventually put it back in the box, unfinished. With this video to study, I'll try it again.👍
I did notice that Italeri used the wrong v8 engine for the model. That engine used in the model is Scania DS14 V8, right engine for early Scania V8 trucks until the 144 series. Later Scania V8 trucks from 164 onwards were equipped with the DC16 V8 engine, which it has different heads
Grazie Luigi,in realtà si,ma il problema è lo spazio in casa,avendo parecchi modelli montati,mettere anche un semirimorchio mi crea un pò di problemi di spazio.
@@ich4226 after you put the wheel on the axle, you glue an endcap to the axle, that keeps the wheels from falling off, but the wheels are free spinning
@@daggrz9692 thank you very much, that makes a lot of sense. I was Just wondering since the wheelcap had a slight bump which seemed to fit into a hole in the rim. It is my First Italeri model and I was surprised to find quite a few design flaws
@@ich4226 Italeri and Desing Flaws are basically the same thing😂 you have to put much effort into it, to get a good looking model. But they have good variety in their products so it's a bit "love-hate" to me🤡
Hey great video i want to buy a model but i don’t really know what i need i saw that i have to buy some collor cand i put it on the model with a brush or is it necessary to airpaint it?
Hallo. Ich habe mir jetzt einige deiner Videos angeschaut und weiß nicht, ob ich begeistert sein soll oder mich über die Fehler aufregen soll. 🤔 Einerseits baust Du sehr sauber, andererseits machst Du Fehler wie Einsteiger. 😕 Du verbaust unlackierte Teile, die farblich unpassend/teilweise völlig falsche Farben haben, neben sehr sauber lackierten Teilen. Deine Farbauswahl hat teilweise überhaupt nichts (!) mit dem Original zu tun und wertet dein Modell/Arbeit direkt wieder ab. Teilweise auf den Wert eines Spielzeugs. Und das bei gewiss nicht billigen Bausätzen ! Decals werden mit/unter Klarlack versiegelt, nicht auf den Klarlack gesetzt. Das Original mag ne goldfarbene Inneneinrichtung haben, dann mattiert man die Sitze, damit es nicht Spielzeughaft aussieht. Das ist nur ein Beispiel, wo ich nur den Kopf schütteln kann. Ich mache das Hobby seit 41 Jahren und habe so einiges gebaut. Seit ca. 25 Jahren baue ich Lkw-Modelle in 1:87 und Panzer in 1:35, Erfahrung ist also vorhanden, dies zur meiner Vita. Ich bin gerne bereit, Dir mit Rat+Tat zu helfen. Grüße aus Köln. Markus Frömbgen
vedo che il la preparazione dei pezzi,le mascherature,il primer, sono sconosciute,non si incolla NULLA se sotto c'è vernice,o cromature,si fa il cosidetto:falso incollaggio,e al minimo urto si stacca tutto,provare per credere,poi ognuno ha la sua tecnica,e conoscenze in materia di modellismo,non è una critica,è solo un normalissimo consiglio..
A pleasure to watch
Beautiful
Well made
The whole process shows great craftsmanship! Stunning piece of work!
Master of trucks!
Very nice, I really enjoyed watching your video. I’m only starting out at modelling kits & videos like this show me what I should be trying to do. Thank you for sharing.
Great job. 🤟🏼
grande Luca... c'è sempre da imparare da te!!...
Thank you bro!!!!!🇧🇷
Complimenti.Ottimo lavoro.Anche io model
Lismo..Camion traspo
Rti speciali,militari.🎉
That is one fine looking tractor my friend. Thank you for sharing your skills with us.👍
thanks for filming the complete build, what do you use to sand de body? (14:00 min.)
Thanks to you!the product is a scotch brite sponge from 3M
Are ypu glueing the peices there as mine wont stay together haha
Чувак вообще выдаёт классно!!!
Brilliant build what glue do you use for the paint piece's?.
Loctite 401 instant glue,with a little wood stick
@@LukePerryModelsChannel
Thank you . One more question apologies I'm new to this modeling but do you need to prime before the colour?
Yes of course,every part need to be sanded and primed to have a good final result
Ah crap 😀. Thanks again .
You're welcome!! For anything just to ask👍
Ciao Luca! I colori che usi devono essere diluiti? E con che ago vanno utilizzati se non sono da diluire?
Questi sono Vallejo air e sono già pronti all uso
Io li uso con un ugello da 0,18 e una pressione di 30psi
Thanks for building this kit. I attempted a similar kit and eventually put it back in the box, unfinished. With this video to study, I'll try it again.👍
Awesome Bob!!!
I am very happy that my video has inspired you to continue !
I wish you a good job🙏🙂
I did notice that Italeri used the wrong v8 engine for the model.
That engine used in the model is Scania DS14 V8, right engine for early Scania V8 trucks until the 144 series.
Later Scania V8 trucks from 164 onwards were equipped with the DC16 V8 engine, which it has different heads
Aclittle late but how did you attach the wheels? Are they supposed to turn in the end? They should fall off if not glued to the axle
Meravigliosamente fantastico 😍
Grazie 🙂
What spray paint arw you using?
Does this requiers glue?
Yes of course👍
It requires some kind of special glue, or I can use default glue?
Tamiya glues,green cap and orange cap
do not use cyanoacrylate glue because it dissolves and ruins the entire model, only use specific glues for modeling
Bravo Luca! Come sempre! 🇮🇹🇮🇹🇮🇹E ho iniziato a lavorare sullo stesso modello. Ma la versione rossa😊🇮🇹
Ottimo! Buon lavoro allora!!
Génial combien de temps en tout ? Belle passion 👌
60 hours more or less
Would have liked to see the big decaling.
There’s a lot going on there to just be a small tractor. Good work.
Yes!! For sure,but is what i love on this scale models
Nice model. Considering to buy this version of the scania from Italeri.
Complimenti lavoro al top, hai mai pensato di fare anche un rimorchio per questo modello?
Grazie Luigi,in realtà si,ma il problema è lo spazio in casa,avendo parecchi modelli montati,mettere anche un semirimorchio mi crea un pò di problemi di spazio.
@@LukePerryModelsChannel io al posto tuo ci farei un pensierino e allo stesso tempo faresti contento chi ti segue
@@luigimasciandare4941 se la metti cosi allora un qualcosa dovrò farlo 🙂
@@LukePerryModelsChannel sei una persona veramente in gamba
Lavoro ben fatto 👍👍👍👍👍💯👍👍💯👍
Grazie Fabio🙂
❤super❤
👍👍👍!
Awesome build , can I ask what paint colour you used for the cab please ?
Thank you!
I used Vallejo Air Gold code 71.066
What is it you use for in the lines the creases with black ?
Papar tape for masking and black vallejo air for paint it
@@LukePerryModelsChannel thanks. When you do the dash snd seats whats that tou use to put the black in the lines tho.
Tamiya panel line
can the wheels spin?
With Italeri Models, normally yes
@@daggrz9692But how? Don't they fall off since they aren't glued to the axles?
@@ich4226 after you put the wheel on the axle, you glue an endcap to the axle, that keeps the wheels from falling off, but the wheels are free spinning
@@daggrz9692 thank you very much, that makes a lot of sense. I was Just wondering since the wheelcap had a slight bump which seemed to fit into a hole in the rim. It is my First Italeri model and I was surprised to find quite a few design flaws
@@ich4226 Italeri and Desing Flaws are basically the same thing😂 you have to put much effort into it, to get a good looking model. But they have good variety in their products so it's a bit "love-hate" to me🤡
Hey great video i want to buy a model but i don’t really know what i need i saw that i have to buy some collor cand i put it on the model with a brush or is it necessary to airpaint it?
😍😍😍
Hallo.
Ich habe mir jetzt einige deiner Videos angeschaut und weiß nicht, ob ich begeistert sein soll oder mich über die Fehler aufregen soll. 🤔
Einerseits baust Du sehr sauber, andererseits machst Du Fehler wie Einsteiger. 😕
Du verbaust unlackierte Teile, die farblich unpassend/teilweise völlig falsche Farben haben, neben sehr sauber lackierten Teilen.
Deine Farbauswahl hat teilweise überhaupt nichts (!) mit dem Original zu tun und wertet dein Modell/Arbeit direkt wieder ab. Teilweise auf den Wert eines Spielzeugs. Und das bei gewiss nicht billigen Bausätzen !
Decals werden mit/unter Klarlack versiegelt, nicht auf den Klarlack gesetzt.
Das Original mag ne goldfarbene Inneneinrichtung haben, dann mattiert man die Sitze, damit es nicht Spielzeughaft aussieht.
Das ist nur ein Beispiel, wo ich nur den Kopf schütteln kann.
Ich mache das Hobby seit 41 Jahren und habe so einiges gebaut. Seit ca. 25 Jahren baue ich Lkw-Modelle in 1:87 und Panzer in 1:35, Erfahrung ist also vorhanden, dies zur meiner Vita.
Ich bin gerne bereit, Dir mit Rat+Tat zu helfen.
Grüße aus Köln.
Markus Frömbgen
🇮🇹👍🥰
vedo che il la preparazione dei pezzi,le mascherature,il primer, sono sconosciute,non si incolla NULLA se sotto c'è vernice,o cromature,si fa il cosidetto:falso incollaggio,e al minimo urto si stacca tutto,provare per credere,poi ognuno ha la sua tecnica,e conoscenze in materia di modellismo,non è una critica,è solo un normalissimo consiglio..