How to Build a Hand Sanding Block for Sanding Discs
Вставка
- Опубліковано 27 сер 2024
- Today I'm showing you how to make a hand sander that uses the same hook and loop sanding discs as my Random Orbital Disc Sander, a handy way of getting more use from sanding discs and make the finishing of woodworking projects and furniture quick and easy when hand sanding.
******************
Makita Cordless Disk Sander Rerview: • Makita Cordless Random...
5 Quick Wood Sanding Tips and Tricks: • 5 Quick Wood Sanding T...
5 Quick Sandpaper Hacks: • 5 Quick Sandpaper Hack...
******************
#sandingblock #sandingblock #handsander
**** Read the Full Article on this homemade disc sander block - bit.ly/2N0cKsm
WOODWORKWEB T-SHIRTS here - teespring.com/...
**** Amazon Store: www.amazon.com...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb...
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb
** Follow on Twitter: / woodworkweb
Made one of these several years ago when a sanding pad from my random orbit sailed off the sander. Since the hook and loop was still in excellent condition I turned it into a sanding pad and it has been on my workbench ever since. These are very handy.
I made my disc sander yesterday.....it was one of those "why Didn't I think of that?" moments!! It's an excellent tool! Thanks!
Colin, thank you SO MUCH for this idea! Years ago I got some 3M HookIt II sandpaper. Guess what? No disc to put them on, since they were the rough side of velcro (needing the fuzzy size to stick), not the fuzzy side, like the regular HookIt. They've sat for what seems like forever, and now, with this video, (and using the fuzzy side of velcro instead of the loop side) I was able to make sanding discs (albeit handheld, but a holder, just the same) for both sizes of sanding discs! (My little one I think is my favorite, being the easiest to hold.) I was so happy with how it worked for the HookIt II that I made some for the regular HookIt discs as well. You're a gem! Thank You!
Super good idea, Colin. So much better than fooling with attaching sandpaper to a block. Thanks.
You're Welcome!
Finally a use for the cut-offs from my Paulk workbench, now to find something to do with the 49 other 6inch plywood discs........
When it comes to the workshop, there is always new ideas/projects that we do to make things easier for us. Nice project. Thanks for the video. Tim
You're welcome, Tim. Thanks for watching.
The reconfiguration of the sanding pad holder looks like a lot less of a fuss to deal with! 👌
Nice simple velcro sanding pad build too, mate. 👍
Cheers.
Thanks for watching, Bill.
This is simple and excellent! I’m making one tomorrow.
Another video with some great ideas from you. Thanks for sharing Colin! I have learned so much from you trough your videos!
You're welcome! Thanks for watching!
Thanks, Colin, great ideas. I always appreciate your projects presented with such good humour and fun.
You're Welcome!
Excellent job Mr Knecht, I´ll gonna take your techniques, thank you for bring us your ideas...thumbs up !!
I like the hand sander.
Thank You!
That is a great simple idea. I have a bunch of disks which don't fit my machine and so I might give that idea a try myself.
Just got done making one I love it works great. I used a 2 x 2 for the handle great job thanks 🤙🏼
Impressive! I'm going to make one this weekend..with a few changes. First I'll use my circle cutting jig on my bandsaw to cut the base of the sander. I already made a length of "handle stock" as I call it for a previous project so that will serve as the handle. And I'll attach it with dowels. I like the storage for the disks. Thank you for the inspiration!
Thanks for watching!
Nice to watch and learn from and nice wooden watch too
Both items are very nice. I particularly like the redesign of the sand paper holder. It allows you to quickly store AND keep track of your sandpaper inventory at the same time.
Thanks for watching!
Nice sander ....good idea ...i would make my disk box with glued shelves instead of “floating ones....that way i would know at a quick glance if i am running out of a particular grit disk..
I love using that velcro
Yup, it's nice stuff. Thanks for watching!
Very Cool hand sanding disc block Sir
To each its own..... I made the three peg holders and they work fine for me. I don't stack them though, rather they all fit flat in a drawer. I'll be making the sanding block for hand sanding. Thanx for all the ideas.
I just made one peg holder with two pegs. I store the different grits in the order of use, i.e. 100 on top 120 immediately below that, etc. I use the two pegs to align the paper to the disc sander and then slip the paper off the holder onto the sander
Thanks for watching!
Nice job Colin , ya need to make a square or rectangular one too for gettin into corners !!
😎👍☘
Peter Fitzpatrick and maybe a triangular one.
@@akbychoice 🤔 🤗 😎👍☘️
Brilliant, Clever almost a Genius!
My respects Colin.
Matt.
Thank You!
Now I am ready for the All Valley torunament. Thank you.
It would be 100% better than electrical sander for some situations!! usually for work on an assembling project during the night time. Thanks for share it sir.
Nice going to have to make some
It's the little things that make the biggest difference, great idea thank you
You're welcome! Thanks for watching!
Thanks for sharing this, Colin. I'm going to build something similar. A suggestion: Maybe put the coarsest grits on the bottom of your caddy and work up so you don't pick up a stray oversize grit on your finer sandpaper. Picking up an undersized stray is not a problem, but an oversized one could be extremely annoying.
Thanks for the tip and thanks for watching!
How's she goin'? Great sanding block. I like the tip about finish sanding by hand so you can go with the grain. Thanks for sharing!!!
Brilliant, thanks Colin.
You're welcome! Thanks for watching!
If you combine the two you could have a handy tool to align the pads with the holes when fitting pads to the sander.
Thanks for the tip and thanks for watching!
That's a great idea. I'll keep that in mind. Thanks for sharing. But I'll have to make some adaptations. I've never seen in hook and loop/Velcro in sheets (only in 3 cm wide straps)
but last year I bought a hook-and-loop sanding device which I can mount into my drill chuck or connect to my angle grinder (it came with a 14 mm threaded rod for that)
Somehow it should be possible to make a handle for that and use it as a hand disc sander.
Hope it works out for you, Hans. Thanks for watching!
Hi Colin, Another great video and I like the upgrade for the disc holder. Cheers, Huw
The tabs were a great idea. I just made mine like a book case with really narrow shelves. I’m very happy with how it turned out but I should have made it larger and with 2 big shelf’s on the bottom to store more sanding stuff.
Thanks for watching!
Adding this to my list of things to make :)
Thanks for watching!
My Habitat for Humanity Restore had the replacement face plates for orbital sanders for $1. I picked one up and now I know what to do with it! Already has the velcro, so easy peasy! Thanks!
Yup, that would make it even easier. Thanks for watching!
Great tip thank you.
Nice job Colin! Thank you for sharing it with us.👌👍😎JP
Great Idea Colin !
Thank You!
Very cool Colin!
Your caddy has inspired me to slightly redesign my planned one for the bench.
Everything is going to be the same, except:
-I saw "A" need for the bottom of the box to be slightly angled up, 10 to 15 degrees, so everything "migrates" away from the front edge.
- I "may possibly cut the back slightly higher, 1"-1.5", so I can incorporate a cut out carry handle. May not as there may be enough room there.
I'll still build a portable index file type box to take out into the world for the discs. 1/4" ply pinned together will work. It's not going to carry 3/4 drive sockets!! Lolol!!!
Great work!!
Thanks for watching!
Greate idea I might use it if ok by you
BELLO - INTERESSANTE.
SALUTI
SALVIO
Awesome Idea, and easy to make!
Thank You!
Buena idea original
Great ideas Colin
Thank You!
Great, looks like i will be adding tabs to my dividers.
Thank You!
Great idea
Cool 😎 cool 😎 cool 😎 thank you 👍
You're Welcome!
Love your sanding disk
:)
very simple very practical and very much my next project.. thank you
You're Welcome!
Great idea... Thanks for sharing
You're welcome! Thanks for watching!
Great idea!
Thank You!
I really look forward to and enjoy your videos. Great job! 👍😎🇦🇺
Thank You!
Hello Uncle Colin 🙏🏾🇿🇦
Thanks for watching!
Hi Colin, thank you for a nice informative video. Maybe if you could, please, show how to round off both ends of the handle, instead of having them straight cut?
Nice I like it. I think I will make 2 of them. They are a little reminiscent of something I've seen before... Oh yeah "wax on wax off"... lol
LMAO ... Thanks for watching!
Still Nothing beats sponges forfinal touch ......
Great improvement !
Thank You!
Buen día, ¿me puede decir cómo sujeto la lija a la madera? No sé ingles y no le entiendo. Posiblemente si es por escrito lo traduzco con un diccionario. Muchas gracias
Less is more. Classic
Always great ideas!!
Thank You!
I know everyone uses the uses the hook and sand paper but I quit using those 20 years ago because they were always falling off. Have they improved that method since then or is it the same old stuff
The budget no-name discs still fall off, but I've found the brand name discs have improved a lot.
Hi
Nicely done Colin! However, you should have made two sanding discs while you were at it & sent one along to me! :)
Maybe on the next jig Steve. ;) Thanks for watching!
I like this idea, though I will probably add a thin piece of rubber between the Velcro and the Plywood.
That's a GREAT tip. Thanks for sharing.
Hello Colin.
Thanks for the knowledge you give us, you do a wonderful job.
I also want to ask what is the tone of the beautiful guitar in your videos, is it a song? Who plays please?
Thank you very much
I'm not sure about the music. It's from the library provided by UA-cam. Thanks for watching!
If you made a square sanding block rather than around sanding block you would be able to get into the corners easier Kevin .
For corners the so-called delta sanders are ideal. The same way it should be possible to make a hand sanding block for delta sanding sheets.
Hans de Groot thank you .... delta sheets ....
Hans has got it. You would just have to make a triangle base instead of a circle.
Simple is good :)
Thank You!
I'm trying to figure out why the dowels are there. You don't mention them except to say you cut them off.
They were there to hold the sanding discs in place. Thanks for watching.
As always.👏🏼👏🏼👏🏼👏🏼👏🏼🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦
Thank You!
What i end up using was a cheap dollar store cd holder
Do you have a link to the peel and stick Velcro that you used?
You can pick that up at Walmart/home depot/lowes
@@joshortiz1576 Thank Josh, I have seen it too, but I was hoping that Colin would let us know the brand he's tried and likes, because I've tried a couple and not been happy with the results.
@@rickferris6987 I am not sure of the name but the color of the box is what I saw. It's the same one that I use. When i need it i just go get it. I never pay any attention to the name of it lol
This sander reminds me of what miagi made danielson use to sand his deck in the first karate kid. If its good enough for Colin and mr miagi then its good enough for me
Sand the floor. Sand the floor.
Sand on, Sand off? ;)
Similar to Japanese sanders. I believe that other countries use similar too, Cheers :-)
Thank You!
👍
宣伝でが多すぎて見れない
Chet
another great tip/idea.I think you invented the Iphone and Job's stole it from you.
lol ... Thanks for watching!