We specialize in high performance Toyota automatics, as well as many other models. Find Us: www.importperformancetrans.com/ 973.406.7000 Instagram - @IPTperformancetransmission Facebook - Import Performance Transmissions Tik Tok - IPT_Transmission
Hi your content is really helpful! Do you know if a transmission for an 2007+ Lexus GS350 AWD (A760H) can be used in a 2010+ Lexus GX (A760F), if the bell housing, tail end, torque converter, valve body, etc. is swapped over from a GX? Any info is appreciated because it appears that the internals of both transmissions are the same.
Hiya, my 07 IS250 had a P2759 - Transmissions solenoid SLU, electronic circuit code since November. In the past 3 months I have already performed 3 x AT fluid and filter change, and I have changed the SLU solenoid and the electric wire in the transmission’s valve body yesterday. The same code has returned after driving for 1 mile. Do you think I can have the problem rectified by replacing the calve body? Or I m likely going to have the whole transmissions replaced? Cheers!
1st off- changing fluid does not fix transmission problems That said, you can try to do something with the valve body but your transmission may be damaged and failing
@@iptperformancetrans I only wish it would throw codes... would make it a lot easier. It started out with a "pop" sound when going down hill coasting. If I touched the brakes at all it would initiate a downshift and that downshift would pop Usually 4->3 or possibly 5->4. Now I hear it during a lot of downshifting. Never on upshit... I just know it's something i need to address before it gets to the point of breaking something.
We specialize in high performance Toyota automatics, as well as many other models.
Find Us:
www.importperformancetrans.com/
973.406.7000
Instagram - @IPTperformancetransmission
Facebook - Import Performance Transmissions
Tik Tok - IPT_Transmission
how to seal one of temperature sensor? any link or guide and can i fit on gx460 after closing one of temp sensors?
Good thing you took a video so you can remember how to put back together
Right because I haven’t done a few a week for over a decade
@@iptperformancetrans I have a760f and I fix my own cars but when I first saw a valve body taken part that was so alien to watch
@@ItsAvideo-v7x Your valve body is nearly identical to the one in the video
Hi your content is really helpful! Do you know if a transmission for an 2007+ Lexus GS350 AWD (A760H) can be used in a 2010+ Lexus GX (A760F), if the bell housing, tail end, torque converter, valve body, etc. is swapped over from a GX? Any info is appreciated because it appears that the internals of both transmissions are the same.
Nice video for valve body of AB60 transmissions
Glad you liked it!
Do you sell valve body with the upgraded larger bore valves?
We do: www.importperformancetrans.com/index.php?l=product_detail&p=5423
Can use valve body only with one hole for the temp. sensor, and leave one loose, fi the car originally had 2?
Not how I would do it
Do you guys do local pickup?
how to seal one of temperature sensor? any link or guide and can i fit on gx460 after closing one of temp sensors?
You can drive a 3/8” cup plug into the hole or use and extra sensor with the wires cut to plug it off
so it can be installed on gx460?
and if you have any link for 3/8 cup write for me, thank you
@@iptperformancetranshelp please
Hiya, my 07 IS250 had a P2759 - Transmissions solenoid SLU, electronic circuit code since November. In the past 3 months I have already performed 3 x AT fluid and filter change, and I have changed the SLU solenoid and the electric wire in the transmission’s valve body yesterday. The same code has returned after driving for 1 mile.
Do you think I can have the problem rectified by replacing the calve body? Or I m likely going to have the whole transmissions replaced? Cheers!
1st off- changing fluid does not fix transmission problems
That said, you can try to do something with the valve body but your transmission may be damaged and failing
You say the common failure/wear is the pressure accumulater valve....any reported symptoms specific to this truck?
Symptoms vary depending on where it’s worn- high pressure, low pressure, soft shifts, hard shifts and code p2714 are the common complaints
@@iptperformancetrans I only wish it would throw codes... would make it a lot easier. It started out with a "pop" sound when going down hill coasting. If I touched the brakes at all it would initiate a downshift and that downshift would pop Usually 4->3 or possibly 5->4. Now I hear it during a lot of downshifting. Never on upshit... I just know it's something i need to address before it gets to the point of breaking something.
@@iptperformancetrans you guys are about 3 hours from me. Are you still 24-48 turnaround?
Will a 2011 ab60f fit on a 2007 5.7
It should
Do you know the difference between oc150 and oc380? They are both ab60f
@@budistman12This is the answer we all are looking for. There has to be a difference.
P2714 code of mark x so how to rectify. Suggested, please
Usually P2714 is a sign of an unhealthy transmission, it’s not normally a solenoid problem as it is described.
You may have a slipping transmission
I need your expert opinion, Is it possible that the transmission to be fixed or will I have to buy a new one?
@@TheAlfa429 It probably needs a rebuild but almost everything can be fixed
@@iptperformancetransthanks sir for ur reply. if I buy a new one so how can I judge the transmission, is it good or bad?
@@TheAlfa429 Pull off the pan and see what it looks like and smells like.