HOW TO MAKE A HOMEMADE THREE PRONG POLE SPEAR - DIY [Full Video Tutorial]
Вставка
- Опубліковано 25 сер 2024
- Watch the video and learn how to create your very own HOMEMADE THREE PRONG POLE SPEAR... Learn as well what kind of stuff you ought to use and how to do the assembly step by step the video will show it to you. Be creative, you might have some of those materials needed for your project sitting in your backyard or storage room, pull them out and do something useful for your fishing adventures and create equipment that will help you find something for your daily survival.
Three Prong is also known as TRIPLE SPEAR, the versatile equipment in shallow reef spearfishing on either night and day, specialty of any islanders. Enjoy watching! And if you like the video please SUBSCRIBE to the channel and get updated on every future upload by clicking down the Bell [🔔] icon below.
Thank You, Folks!
#MakingThreeProng #MakingPoleSpear #ThreeProngPoleSpear
That's helpful video thanks!!
Thank you for watching the video brother.
Yeah HHhH from marshall islands
Nice fish drawing 😂, thanks for sharing this video
Thank you for your support and for watching the video Bosing, keep safe.
Galing mo BRO
Salamat Bosing! Keep safe.
That's awesome that you share your knowledge. 🤙🏽🤙🏽
Thank you so much for your support Sir.
Awesome video dude!
deng.
mabuhay ang pinoy
Maraming Salamat Kabayan.
👍 🔱
Thank you for make this video this was very helpful and awsome craft manship.
😁😁
Ung drawing ang nagdala sir. Hehehe.
Thank you for the video.
I envy craftsman, their skill and patience, . I don’t have the skill,and I have too work real hard at patience, thanks, Bearhunter5
Thank you so much for the support, my friend.
Sarap magpagawa sau sir . . Di kumplito kagamitan ko dito eh hehehe
Ganda bro. Tayo na fishing na.
I like it finally u make the video.....cheers bro...
Galing nmn lodi talaga....
Salamat bro, gumawa ka ng ganyan at mag night dive ka mas mabilis ang views mo bro. at SUBSCRIPTION. Pero torch flashlight ang gamitin mo instead of regular flashlight.
@@FreeDiver736MH d pde sa amin yan bro malalim kc kmi pag nagdive saka malakas ang agos...
@@GabbyRamalSpearfishing Ganoon ba? Pwedi pa din iyan kung sanay kayo gumamit niyan, kasi gamit namin dito iyan 5ft to 30 ft ang dinavide namin sa gabi free dive, pero kung may gamit na nitro up to 60 ft. mabilis kasi ang recovery niyan.
@@FreeDiver736MH free dive lang din kami bro saka 18meters kasi ako dumadaan lalo pag malakas agos gt kasi hinahunt ko bro.. Pero okey yan pag wala agos bro sa mga goat fish at danggit mabilis yan....
@@GabbyRamalSpearfishing Tama ka bro, nakita ko nga yung mga huli ninyo malalaking talakitok ang galing.
Ok master Kita kuna simpli lang pala gumawa nyang pana mo,club hitch na tali ung gamit mo para mahigpit salamat sa video dami ko natutunan
Salamat bro, gumawa ka ng parehas na spear tapos gamitin mo i video mo aabangan ko. sanayin mo gumamit niyan maganda at mabilis madaling humuli ng isda walang kahirap-hirap.
Try ko2 mamaya sir ty.
Salamat idol pinaunlakan mu Yung tanong ko
wow! very creative!
Salamat Sheng...Watch the other videos please...!
sure!!!
Nice video sir thanks
Thanks so much bro, thanks for watching keep in touch.
Dami ko nakuha idea idol sa panuuod ng mga vids mo spear gun naman sa susunod idol salamat.
Salamat bro keep in touch. Gagawa din ako ng video para sa common Speargun ayon sa request mo para may matutunan kayo.
can you make one for me and if done tell so i can take it? im in marshall island too.
Sure brother, but not at this time, I'm in the outer Island, when I get back to Majuro you can surely get one if you're still interested.
Sir tanong ko lang po sa flashlight niyo po ba nakakabit yung GoPro niyo ?? mahilig din po kasi ako mag night spearfishing wala po kasi akong idea kung maganda ilalagay yung GoPro :)
Sa Flashlight nakakabit ang camera ko, mas maganda kesa sa ulo mo ikakabit, lalo na kung gopro camera gamit mo.
What other pole can I use to make one of those?
The best alternative of the fiberglass rebar is coconut lumber, cut a strip of it 1"x1"x5' make all corners round, sand it smoothly that no sharp tips would raise up sand it with grit 100 sandpaper then finish it up with three coats of liquid marine epoxy. When the epoxy coat is cured, slightly roughen it up with grit 120 sandpaper as final touch only to eliminate a smooth surface, it'll become slippery to your grip underwater if you ain't sand the smooth surface.
Question why stainless steel prong is not ok to use?
Because it's very soft and easy bent when hit the rock, often times its tips dulls in few minutes.
Where do you get fiberglass rebar?
From a construction company who're doing housing project on Island to island here in the Marshall Islands.
san po ba makakabili sa inyo
Di ka makakabili bosing kasi dito ako sa abroad. Salamat sa support bosing keep safe.
Why are they so short? Most commercial made ones are 6ft min. Also, if you've had good luck w/ using soap to lubricate the string in the rubber, cool, but most soaps sold in the U.S. are filled with petroleum products. Petroleum rots rubber seriously diminishing its lifespan. It's also been argued that sharpening the prongs with only a single bevel toward the inside will cause them to spread apart upon contact with the fish. Coupled with the corrosion (not using stainless) holds the game on the spear better. I've never noticed. Any thoughts or opinions?
We used to make a 3ft. long pole spear for close distance shots, especially when the target is in the cave, and a long one like more than 3ft. is hard to maneuver. When it comes to the soap as a lubricant it was I'm still using till now and my rubber seems don't get any rots most of them 4 years of age still good, maybe I just used a non-petroleum soap, and I agree with you, not stainless prong gets corroded in a matter of hours after diving so we had to soak it down to freshwater for the whole night then apply engine oil upon it, the reason I recommend hard metal instead of using stainless is that its resistance against the rock or hard corals is the matter most in the duration of the diving. When it is stainless just a few shots it dulls, lots of slip and waste shots follow. About angle sharpening of the tips, I'm doing it only on pole spear because it is way easier to do than the rounded one, and it does not travel with much velocity as it was in the speargun, and I agree with you that does not create a good impact on speargun because of the velocity matter. Thank you so much my brother for watching my humble video.
Where can i buy fiberglass rebar in philipines?
Idul bka nmn,,😀
Good evening sir, san po pede makabili ng fibreglass rebar
Alibaba and amazon, pero hindi mabibili ng iilang piraso lamang iyan, dapat doon by hundreds, kaya iyan left over lamang iyan kinuha ko sa construction site dito na gumagawa ng mga housing sa isla. Kasi doon di pwedi ang bakal dahil sa lakas ng kalawang.
Nice bro. Eh bro anong gamit mong stick bro?
FIBERGLASS REBAR iyan bro, kung wala niyan sa lugar ninyo pwedi ka gumamit ng bahi ng anahaw or niyog, bilogin mo lang ng mabuti at 5/8" ang diameter lihaing mabuti para walang salubsob tapos aplayan mo ng epoxy gaya ng ginawa sa video.
@@FreeDiver736MH ahh sge2 bro maraming salamat
Anong kahoy gamit nyo po???
Fiberglass rebar iyan bosing, mahirap mahanap sa Pinas, salamat sa suporta bosing keep safe always.
Why not stainless?
Malambot at madaling mapurol o madaling bumilog ang dulo pag tumatama sa coral dahilan para di na tumalab sa isda.
kuya may biyahe ba papunta dyan sa marshal island galing pilipinas at madami bang pilipino riyan?
Yes bro may biyahe tungo rito at kunti lang ang pinoy dito mga less than 1K lang kami dito, pero peaceful ang lugar at sagana sa sea foods.
Saan po makakakoha ng rebar na fiber??
Sa mga construction site ng sea port may makukuha ka doon dahil ginagamit iyan sa mga gumagawa ng dock kasi hindi kinakalawang. P'wedi ka humingi ng mga off cuts nila.
Pwedi mag order sir?
Andito ako sa Micronesia Bosing, kung sa Pinas lang ako pweding-pwede. Maraming salamat sa support Bosing have a great day always.
Boss nagsiship ba kayo ng gnyan?
Hindi sa ngayon dahil mas mahal ang babayaran ko sa shiping kumpara sa presyo ng spear. Pero kapag nakarating ko sa kota ko sa subs ko mamimigay ako niyan ng libre, kaso malayo pa iyan dahil kahit sa kalahati ay wala pa ako sa kota.
Great video 😅😂 can u make a homemade speargun
How can I buy one of yours pls
In fact I don't sell online because of custom law, You could pay more than the price of the unit in the custom, I just bring it each time I got vacation then send it via DHL if the buyer is unable to fetch it up in Manila, in this case the buyer is the one to pay the shipping via DHL.
magkano pag binili idol
Kung dito sa abroad na bintahan $45.00 USD ang isa niyan fixed price ko sa bawat customer pero ewan ko lang jan sa Pinas dahil mabigat sa mga Pinoy ang ganuong presyo kung converted na sa piso, lalo na sa ordinaryong fisherman lamang.
Boss kapal naman ng steel mo ang bigat nyan at mahina ang dating sa target
Tama ka bro. Kasi nung ginawa ko ang video wala akong ibang rod na available kundi ang size na iyan kaya nga nirekomenda ko na 3/16" ang diametro na angkop pero pwedi rin ang 1/4" kung walang iba kagaya ng ginamit ko jan sa video 1/4" yun. Salamat sa panonood bro keep in touch. click mo na din ang bell icon para updated ka sa mga next uploads ko.