Spraying Epoxy Primer & Single Stage Paint - Hempel Paint

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • In this last episode of the camper paint series, I managed to prime and paint the camper. Though the process did cause some issues as my tools were not functioning properly. Therefore I delt with some runs in the paint. But luckily it was the first coat of color where I had to sand either way. The 2nd coat of color when down beautifully. After some assistance from my brother, I managed to get this camper returned on the exact 2-week mark as mention. The owners were very happy with the results and I was happy to paint this vintage camper for them.
    **This video is not intended for children**

КОМЕНТАРІ • 13

  • @gwilli1754
    @gwilli1754 3 місяці тому

    Looked really difficult, glad it turned out OK. Great job on going back until acceptable and then giving it a little extra! I don't see how all the folks are saying it was easy. It is easy to see on youtube!

  • @Grant7
    @Grant7 4 роки тому +2

    Nice job... but here's a quick tip.. switch your filter and regulator around... put the regulator closer to the gun and the filter on the bottom, that will give you more accurate air pressure...keep up the good work

  • @heatherbuzbee4748
    @heatherbuzbee4748 3 роки тому +1

    This helped me so much! I now feel much more confident painting my Jeep at home.

  • @josephdecarlo1262
    @josephdecarlo1262 Рік тому

    Looks easy. I sprayed Hempel hempadur on a 81 ft railcar with 11 ft bulkheads. That's a nightmare!

  • @josephdecarlo1262
    @josephdecarlo1262 Рік тому

    Looks easy. I sprayed Hempel hempadur on a 81 ft railcar with 11 ft bulkheads. That's a nightmare!

  • @TheRealGrimblo
    @TheRealGrimblo 4 роки тому

    I hope you dont stop posting man, your Civic build is the only reason i bought my Project-Civic EG4. Cant wait for another video!
    I hope we get some videos soon, Greetings from Germany!

  • @UNDERFUNDEDGARAGE
    @UNDERFUNDEDGARAGE 4 роки тому

    As always great video bud!

  • @veronicajohn6822
    @veronicajohn6822 4 роки тому

    Cool!

  • @leoliu041892
    @leoliu041892 3 роки тому

    Can that Nissan tow so much weight? Good work, I’d remove wheels and put use dolly to paint in garage...

  • @devgarage5310
    @devgarage5310 4 роки тому

    Awesome videos man. So, your gun is the same one from the EK videos so why did you run into consistency issues. You had to dilute epoxy primer more. Also, did you notice the shine difference between the single stage and clear/base finish?

    • @GarageSpeCivic
      @GarageSpeCivic  4 роки тому

      Clogged vent cap was the problem. Must have not cleaned it out properly the last time I painted the hood

  • @anthonyrowell7853
    @anthonyrowell7853 4 роки тому +1

    First?