B-Pillar Chop, Cutting Up A $50,000 Jeep Is Terrifying!

Поділитися
Вставка
  • Опубліковано 30 жов 2024

КОМЕНТАРІ • 269

  • @Majja13
    @Majja13 Рік тому +28

    I am sure I am in the minority but I love it when I hear you or Cody explaining the why and the how. You are all a wealth of knowledge and we are the benefactors of that.

    • @mendonesiac
      @mendonesiac Рік тому +1

      I might be in the minority as well, but I see this channel as the 'body shop'
      I appreciate their 4x4 builds, but there's plenty of other channels for that content

  • @JRs-Garage
    @JRs-Garage Рік тому +20

    Great to see Hillbilly improving and learning new skills 👍🏻👍🏻

  • @kenstringer9756
    @kenstringer9756 Рік тому +13

    I love the way hillbilly is getting better and better!

  • @scottmiller2455
    @scottmiller2455 Рік тому +20

    Your videos of antics and adventures are good. BUT it was nice to see you back in the shop doing technical work and doing it to your high level of standards. I don't know how someone would think Hillbilly is being pushed to the side. I see you giving him more responsibility and him growing in confidence and knowledge. You appear to have very high standards in your profession and you are mentoring him. Thank you

  • @erichall9438
    @erichall9438 Рік тому +5

    I’m not a child, I like your whole crew, I imagine trying to make UA-cam videos and run a full time shop takes all kinds of after hours work. Nice video gentlemen.

  • @timhenson4815
    @timhenson4815 Рік тому +7

    Hillbilly is doing such a great job !!! Seriously jack of all trades ! Great to see all of yall 👏 keep building awesome things

  • @davidweidner1675
    @davidweidner1675 Рік тому +29

    Good to see Hillbilly learning from an expert

  • @5SpinnWin
    @5SpinnWin Рік тому +6

    For the past 5 years the machine shop I work for has made all of swag offroad parts. I personally have been responsible for all of there fingerbrake line of products. Really cool to see them on this channel.

  • @timvanasen9822
    @timvanasen9822 Рік тому +7

    Great video Robby is lucky to have Hillbilly he'll do anything & learn something new if need be, Cody is a very skilled bodyman I like when he explains a project & polightly corrected Hillbilly with the "hingpiller that's good teaching, great video thanks for sharing ❤️😉👍

  • @gregorygene9003
    @gregorygene9003 Рік тому +9

    I love watching this type of body repair videos.

  • @Janer-52
    @Janer-52 Рік тому +7

    New stuff is always fun ...the fact you did your work first shows your dedication to your clients. Fun stuff and videos must always come second. I appreciate your work ethic (and your fun videos as well)!

  • @jerryseal6062
    @jerryseal6062 Рік тому +3

    The interaction between you and Hillbilly is a large part of your attraction

  • @dougalexander7204
    @dougalexander7204 Рік тому +1

    Mr. Layton with his crew trained for Robby perfection, he can fix anything from a broken heart to the crack of dawn, even weld a Mountain Dew can under water.

  • @kellyamos1321
    @kellyamos1321 Рік тому +3

    Love it when Steve videos, please keep him on the camera!!!! Great job steve!

  • @Peteblz1
    @Peteblz1 Рік тому +33

    Hillbilly please use safety glasses when grinding man! We want you safe and sound bro! The channel needs you.

    • @shakes5847
      @shakes5847 Рік тому +3

      Usin the good ol' safety squint I see

    • @Peteblz1
      @Peteblz1 Рік тому +4

      @@shakes5847 except he wasn't even doing that much. He's was straight up like 👀 hmmmmmmm

    • @remorrey
      @remorrey Рік тому +1

      Amen!!

  • @jamesbigham9036
    @jamesbigham9036 Рік тому +1

    Robby I like the divide and conquer method having Hillbilly working on other projects so u guys don't get behind schedule is smart.

  • @danielmurray3496
    @danielmurray3496 Рік тому +1

    glad to be back in the shop the team seam to be great together Cody is a great wealth of knowledge and Stability good to see hillbilly learning more

  • @Classifiedreality
    @Classifiedreality Рік тому +5

    15 mins of bobby and crew is never enough....just saynnnnn🙃😎🙃👨‍🌾🚜👨‍🌾

  • @bryanmcdermott4204
    @bryanmcdermott4204 Рік тому +17

    This could have easily gone wrong. Robby has skills.
    Also, it was interesting to see how Hillbilly and Cody got the pickup done correctly. I have successfully done a similar job wrong before on my truck, and it showed.

  • @imfloridano5448
    @imfloridano5448 Рік тому +5

    Robby and crew keep making it happen as always. The content is always educational and informative to me if I ever attempt to assist anyone repair a damaged vehicle or metal working. The tips y'all provide, like 23rd Garage channel, are awesome👍🏾👍🏾👍🏾💯💯💯

  • @saintracheljarodm.holy-kay2560

    Sometimes that's just how the workload happens, have a blessed week amen.

  • @billbillinger2491
    @billbillinger2491 Рік тому +19

    15:10 Robbie doing the work of three... that's what a good business owner does. Keeps customers coming back. Too bad there's a LOT of grinding going on without eye protection. That can lead to more personnel 'outages'. Safety practices are best led by example...and holding employees accountable. Nobody wants a 'one-eyed body man'. They have no depth perception!

    • @surlyogre1476
      @surlyogre1476 Рік тому +4

      A wise man once (more than once, actually) said: "Safety rules are written in blood."
      Hillbilly, wear your safety glasses.

    • @DB-yj3qc
      @DB-yj3qc Рік тому +2

      Many U-tubers don't use eye pro it's drives many of us nuts. I've experienced quite a few incidents, always having glasses and or safety glasses/ face shield on has saved my eyes.

  • @JohnGotts
    @JohnGotts Рік тому

    Want to add another comment that I really enjoy Mr. William from the Hills' work.

  • @lonhoschar1943
    @lonhoschar1943 Рік тому +1

    Great video guys!! You are certainly a bunch of busy little bees!!! Love watching you guys work and seeing all the craftsmanship you put into your jobs!! NICE!!

  • @bobtucker8875
    @bobtucker8875 Рік тому +1

    Yeppers, I must say that you guys know what you're doing. There's no way alot of us could do what you do. Thanks 👍 for sharing.

  • @imonlyaman4381
    @imonlyaman4381 Рік тому +1

    Thanks for the video guys! You're doing great.

  • @mattc.310
    @mattc.310 Рік тому +2

    Lots going on at the LAB shop. You guys are making it happen.

  • @Highlordratick
    @Highlordratick Рік тому +1

    It is like my motto says: Pay work comes before Playwork.

  • @808SSCamaro
    @808SSCamaro Рік тому +1

    Only 6 months of waiting huh! I got to give you a hard time LOL! Thanks guys for sharing! Always cool seeing the repair videos!

  • @stephenpoe2037
    @stephenpoe2037 Рік тому

    NO REST FOR THE WEARY ! Thanks for sharing !

  • @billybike57
    @billybike57 Рік тому +1

    I’ve actually visited the SWAG shop in Portland, I purchased the portable bandsaw platform, love it. Quality products from SWAG!

  • @MarkoMygun
    @MarkoMygun Рік тому +1

    Nice job Robby and Crew

  • @Frippa212
    @Frippa212 Рік тому +1

    Great work as always!! Keep it up and we’ll see you in the next video 👍👍

  • @tonywoodward3167
    @tonywoodward3167 Рік тому +1

    You guys do great work.we picked up our daughters car from our local body shop and it was cover in bird poop I wish they cared about their customers as much as you do.

  • @larrygomez5521
    @larrygomez5521 Рік тому +2

    King of free tools

  • @joemcintyre2090
    @joemcintyre2090 Рік тому +1

    Props to Robby's skills!

  • @opendstudio7141
    @opendstudio7141 Рік тому +3

    Good job pulling together a nice video with an abundance of variety.
    With the BOSS out; people will complain about the minute changes though.🤷‍♂️

  • @user-nj2jn5ld8i
    @user-nj2jn5ld8i Рік тому +7

    What is the purpose of cutting the B pillars?

  • @Johntasticful
    @Johntasticful Рік тому +1

    Cool to see Cody

  • @mcdavis101
    @mcdavis101 Рік тому

    We need more Hillbilly!

  • @fredgodbout7423
    @fredgodbout7423 Рік тому +1

    Hola mi amigo. I appreciate you and the boss for being special people. Your children are beautiful❤

  • @MaskedUnknown408
    @MaskedUnknown408 Рік тому +1

    Wish I had friends at Harbor Frieght lol I could get some project done finally

  • @japanham5973
    @japanham5973 Рік тому +3

    Good evening from Japan!

    • @cclapew
      @cclapew Рік тому

      Good morning from Hinton Alberta Canada!!!!

  • @kjjeep2718
    @kjjeep2718 Рік тому +2

    I'm glad that jeep is getting used, it's gonna look great with the top off in the summer.

  • @randyjones2494
    @randyjones2494 Рік тому +12

    Hillbilly, you are awesome man, but please wear your safety glasses when grinding

  • @bob3485
    @bob3485 Рік тому

    Thanks for the video Robby. 💯

  • @gregb76
    @gregb76 Рік тому +3

    Come on Robby I can't believe that Milwalke doesn't make a belt grinder but as a body shop, you should have one anyway. Robby you know we always love to watch you weld! Come on Steve you and Hillbilly should be working on the new press and pipe bender. Hillbilly making big muscles that is why you are so much country stronger than him. Hillbilly remember the children watching wear your eye protection they are too valuable. Great job guys love it.

    • @delbutler885
      @delbutler885 Рік тому +2

      Are you deaf? Robbie said that there's 3 guys in the body shop gone this week. We watched body work on the video because the paying work has to be done.

  • @reddog543211
    @reddog543211 Рік тому

    Great job on the jeep....she's lookin great !!

  • @bleakyfinder2692
    @bleakyfinder2692 Рік тому +5

    why are you cutting the the B pillers off, and then put on a connecting plate to put them back on again?

  • @kimetherington2252
    @kimetherington2252 Рік тому +1

    Shortstaffed and lots of irons in the fire! Talk about multitasking, I don't know how you keep things straight! I can hardly wait until you get back on the laymo, I'm really looking forward to that! Til next time, see you then. 😊

  • @codymcclaskey1043
    @codymcclaskey1043 Рік тому +1

    would like to see Cody in more of your content!

  • @misharoy284
    @misharoy284 Рік тому +1

    Hello from Corey in Fredericton New Brunswick Canada

  • @albertdehn8381
    @albertdehn8381 Рік тому

    Thanks for sharing 😀👍

  • @donmadere4237
    @donmadere4237 Рік тому

    Swagg off-road makes some cool stuff that works great!

  • @_Merica_USA
    @_Merica_USA Рік тому +1

    Another Great Video 👍 Great content, keep up the great work!

  • @dustinadams6336
    @dustinadams6336 Рік тому

    I hate having to calibrate the welder every time you switch the head but it’s a nice machine. Use it seems like daily at work.

  • @johnnyadams1755
    @johnnyadams1755 Рік тому +6

    Funny watching Hillbilly critiquing Robbies welding.😂

  • @garychaiken808
    @garychaiken808 11 місяців тому

    Great job guys 😊

  • @johnlennon335
    @johnlennon335 Рік тому +2

    Safety glasses boys!

  • @brandenthompson6351
    @brandenthompson6351 Рік тому +1

    I dought hillbilly is going anywhere. As businesses grow they need good employees and he's definitely not a bad employee. Just because Robby is bringing someone else into the videos doesn't mean alot is changin.he just probably wants to show more of his crew off. Love the video and will wait for the next

  • @UncleManuel
    @UncleManuel Рік тому

    This really is a nice "bee pillar job kid"! 😁🤟

  • @randymiller7521
    @randymiller7521 Рік тому +1

    If it wasn’t for Hillbilly I wouldn’t watch this channel. You other guys are cool but Hillbilly makes it what it is.

  • @MrDan1509
    @MrDan1509 Рік тому

    Lasers are cool, just gotta make sure the subject being worked on is level. I learned myself real fast on a slight bathroom fuq-up🤣

  • @jmjm6607
    @jmjm6607 Рік тому +1

    great job again.

  • @1944chevytruck
    @1944chevytruck Рік тому +1

    AWESOME!

  • @johnkranz4004
    @johnkranz4004 Рік тому

    Very nice job guys

  • @sandkworkshop
    @sandkworkshop Рік тому +2

    Interesting stuff as usual.

  • @marklar7551
    @marklar7551 Рік тому

    Bro, you're a working business and a crew, good video 🗿👽🗿

  • @louis220558
    @louis220558 Рік тому

    GREAT JOB

  • @TheOldaz1
    @TheOldaz1 Рік тому +2

    So the B pillar top section is no longer attached to the lower section? How does that go for the upper seat belt mounting in the event of an accident??

  • @taylormade710
    @taylormade710 Рік тому

    Nice work.

  • @scottkrieger6386
    @scottkrieger6386 Рік тому

    Great project guys

  • @mikecamrcplus3057
    @mikecamrcplus3057 Рік тому

    Grinding with glasses once I felt something in my eye. Thought it would get better and so didn't worry about it. It was minor but after the 3rd day it still bothered me on and off. Thought I had scratched it rubbing it. Ended up going to the doctor to be sure. Well he was not happy. Being hot it had burned into my eye and so did not come out. After 3 days it also started to rust.
    So use eye protection but even then if you feel something go get the dye treatment and checked properly.

  • @thomasgraham5842
    @thomasgraham5842 Рік тому +1

    got the lasor level , but was the jeep level on the floor . tyre presure up down swing it all around , was the floor lever to the jeep being level for the lasor .

    • @SudoSamurai
      @SudoSamurai Рік тому

      You spelled laser wrong.. twice. 🎉

    • @HandTightGarage
      @HandTightGarage Рік тому +6

      You missed something. He used the Laser as a straight edge, not a level.

  • @I-apologize-in-advance
    @I-apologize-in-advance Рік тому +2

    This looks like a purely cosmetic mod (and a ton of work) that no one needs.

  • @dbo11tango
    @dbo11tango Рік тому +3

    You guys on this video one min after it drops like you're running a Drag Tree. Lol i don't even get notified till 5mins max after a video drops.

    • @ordinarypete
      @ordinarypete Рік тому +2

      Same. I’ve been on UA-cam when it drops and still don’t get the notification for five minutes or so.

    • @dbo11tango
      @dbo11tango Рік тому

      @ordinarypete They're running youtube Cheat Codes or something lol

  • @robda7195
    @robda7195 Рік тому +1

    When you blow through on a weld stop count to 20 then carry on don't keep at it as you'll only be chasing your tail and making a TRD show

  • @keithhill9138
    @keithhill9138 Рік тому +1

    Just remember Robbie use the tools that you spent good money for (like your level) to do the job except the job on the Jeep where you had to be unlevel!

  • @carlstephens-tm7zj
    @carlstephens-tm7zj Рік тому +1

    What is the purpose of the pieces you installed in the B pillar. Please explain for us that don’t know why you installed them

  • @randalmartin438
    @randalmartin438 Рік тому

    And that's the rub to be in the boss you're the fill in for everybody else

  • @Autodoc3275
    @Autodoc3275 Рік тому +7

    Not so terrifying that he's cutting the piller. Terrifying that jeeps cost $50k now lol

  • @auldman
    @auldman Рік тому +3

    How does this not weaken the B-pillars?
    The B-pillar started as a double skinned box section that gave good bending resistance. Now it just rests there with only a pin to stop it sliding about and gives no bending resistance!

  • @RayleighCriterion
    @RayleighCriterion Рік тому +1

    It would be nice if Hill Billy would wear safety squints when grinding.

  • @Fatguyexplores
    @Fatguyexplores Рік тому

    O Layton rules

  • @johngraymusic
    @johngraymusic Рік тому

    Colton looks like Jerry Cantrell from the rock group Alice In Chains!! Rock on dude!!

  • @GeorgeT6566
    @GeorgeT6566 Рік тому

    No boss lady on Mondays. Oh well I am out of here until she comes back. LOL

  • @RambozoClown
    @RambozoClown Рік тому +2

    You really need a TIG welder.

  • @edwicks66
    @edwicks66 Рік тому

    Hurry hurry , and get it done . Hurry !

  • @SchysCraftCo.
    @SchysCraftCo. Рік тому

    Awesome 👏

  • @Christian76S
    @Christian76S Рік тому

    AWWWWRRRRRSOME !

  • @DirtyDiezel
    @DirtyDiezel Рік тому

    less Robby more Hillbilly!

  • @robertsmith7580
    @robertsmith7580 Рік тому +2

    Hillbilly safety glasses man !

  • @terryderush2657
    @terryderush2657 Рік тому

    Great 👍 stuff 👍 🇺🇸

  • @danknight5019
    @danknight5019 Рік тому +1

    Hillbilly don’t forget your safety glasses, you only get one set of eyes 😅

  • @riquimikulewicz6828
    @riquimikulewicz6828 Рік тому +1

    Robby has to be a multi millionaire cause that man spends more money then ill ever see 😅😢

  • @neilfromclearwaterfl81
    @neilfromclearwaterfl81 Рік тому +1

    Sometimes its the even simpler jobs than cutting the B-Pillars that can be even more Terrifying. Imagine the simple task of installing a relatively inexpensive CB antenna dead square in the middle of the roof of a new off the showroom floor top end custom Maserati brought in by a Lawyer to a very small shop in 1978. No Internet or UA-cam Videos to find out how to remove the headliner or even know if it was possible to install the antenna in the required location. I would have refused the job as the risk was greater than the cap on the small shops liability policy. Boss did the work himself, ended up in court and lost everything paying the damages. Something about violating the structural integrity of the roof due to where he drilled the hole.
    A seemingly minor mishap can become an extinction level event for a small shop.
    Best!

  • @randyjackson8138
    @randyjackson8138 11 місяців тому

    Awesome video as always watching you guys build stuff, but have to say why do you guys never wear safety glasses. I have had metal in my eye and can say it’s not fun getting it removed. Thank as sharing

  • @happydaddy2618
    @happydaddy2618 Рік тому

    YALLLLLL SHOW SOME LOVE IF YOUR A MEMBER OF THE HILLBILLY HOARD! WE NEED SOME HOARD SHIRTS CUT!

  • @hunter1776
    @hunter1776 Рік тому

    oh ya mornin yall🤙

  • @stephenstevens6573
    @stephenstevens6573 Рік тому +3

    Maybe somebody can help me here...why did they cut out the B pillars, just to wrld them back in? Im confused...