Furitek + Injora + 3Flow9RC = Ultimate TRX4M!
Вставка
- Опубліковано 15 жов 2024
- Checking out the new Furitek Bettle chassis for the TRX4M and several upgrades from Injora & 3Flow9RC!
This thing is absolute monster now! Check it out!
Furitek Carbon Bettle chassis available here
furitek.com/pr...
Furitek Rainbow Bettle chassis available here
furitek.com/pr...
Injora Servo package for TRX4M found here
amzn.to/3xbI7Eh
Injora high clearance links here
amzn.to/3l971BO
Injora brass diff covers found here
amzn.to/3YzI2Gs
Injora brass steering links found here
amzn.to/3XjDDWN
Injora brass c hub found here
amzn.to/40BJUAf
Injora brass steering knuckles found here
amzn.to/3Yg6eOj
Treal wheels used found here
amzn.to/3I3Tdk7
Injora tires used found here
amzn.to/3Yw58O7
Furitek lizard ultimate found here
bit.ly/3llzx3v
Furitek micro Komodo for Trx4m found here
bit.ly/40CBbhb
Small 2 & 3s batteries I use found here
palmbeachbots....
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.c...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref...
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/pr...
Furitek stinger combo for TRX4M here
furitek.com/pr...
Furitek lizard ultimate here
furitek.com/se...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.c...
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/i...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price (agfrc)
amzn.to/3xJbb7r
Another great BUDGET servo here (Emax)
bit.ly/2SjZXUx
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
My favorite BRUSHED motor here
www.ebay.com/i...
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - Розваги
Thanks for shot out. The skid you have is to be used and works best with the stock bodies since the bumper overhangs so much. I do already have a shorter, slightly steeper front skid that sits just below and behind the steering link to not interfere at all for more a comp style rig. New servo mount and steering link coming soon for it as well
Sweet! I’m gonna have to pick that one up. I honestly bought this one for my bronco and it just made its way onto this lol. I’m gonna switch it to the bronco and check out the new one for sure! Really appreciate the work you do with these things. We need more people developing new stuff instead of copying the stock stuff in aluminum or brass lol
@3flow9rc10 Sounds perfect, when is the new steeper front skid for a comp chassis going to be available roughly?
I'm glad u got the injora servo. Ur the first one I've seen do a video with it. My stock servo stripped a gear so I ordered an injora one. Should b on its way oversees now. Can't wait
Thanks the video! 3Flow9 is amazing! Love all of his products! Definitely an innovator for these little rigs!
As soon as you started talking about the new servo numbers, I hit pause and scrolled through hoping to see if our Austrian friend had commented. Would be nice if he could get his stout mitts on one to test! :D
I didn't want the TRX4M until I saw this rig. I want that rig. Thanks Matt. I will have to make a build list from this one.
I’m in Fusion right now working on a flat servo mount with the needed steering rod. If it works I’ll throw it on thingiverse for anyone who wants it. So far it’s all printable without supports so will be easy to print.
I've got a setup that is now working perfectl with a Reefs 179 on the Furitek Grasshopper chassis. It now sits horizontal and is just below the 62mm tires I'm running, without having to hack up the stock running gear much at all. The only thing needed is to cut the little tabs off the axle that fit into the notches on the stock servo mount, instead I use the structure of the axel itself to lock in the orientation of the servo mount. I'll take some pictures and upload to thingiverse and printables in an hour, really happy with how this turned out. I'll tag the files as TRX4M servo.
Did this limit your steering angle? Seems stock servo mount position is best for most steering capability.
Nice build! Always killing it! Thanks for the info. Always top notch!
I ordered me the bettle chassis & coming on Saturday. Putting injora brushed motor kit in it, gonna put some k10 rear links, both on the front & rear, gonna make it super long. Lol Hopefully it works out. Of, btw, fyi, injora has a lay down servo mount option now.
That servo is gonna be a game changer
Is it really a TRX4M anymore though? Don't get me wrong, it drives amazing!!! They needed to something for the truck though... I may go this route, because as of right now, mine does not get driven AT ALL... Great vid as always!
Super build..Cant wait 2 see it in my hands
Appreciate you also Matt, will catch on the next one
Hey... Just put a blower scoop on top of the servo and it'll look bad ass 😉
Thanks for all the tips n tricks 👍
Awesome build brother
Amazing man great video so far really appreciate all you do for the community it’s not easy doing amazing consistent content like this 🔥
Wow! Beautiful machine. Matt, how about a video comparison with and without a rear link riser?
With the fury take stuff I believe this is one of the best cars on the market I have the mofo bam 4100 in mine and it is flat-out amazing I got 16% under driving the rear 9% in the front and then just all tricked out but it's the skid man the skid plate it hangs up on everything minutes sets to low right there I do have those little metal brackets I'm going to put on and try to cover it and see if that'll help it slide I really would like to find some type of paint or something that's real slick and hit it all also now there's a lot of portal axles coming out
Awesome build Matt! 🔥💪
Dang.... I think I'm gonna have to order the bettle now. I disagree on the skid plate... look at all the 1/10 comp rigs with rollers on the steering link. I think that skid plate is doing more harm than good. I can't believe how well that thing climbs without any rear springs. Enough space on the chassis for factory electronics?
Yeah after driving it the skid really sticks out a bit more and may not be the best solution. I think I’m going to go back to my 3D printed link that sits back farther than stock. It wouldn’t work with the skid. There should be room for the stock electronics. They’ll just be mounted a bit higher than I’d like.
The 3FLOW9 RC skid for the TrX4m is designed to be used with the stock bodies. It gives the best glancing angle with the bumpers sticking out. And it's only 4mm past the steering link. Youll eventually hit something in the front end without it. I already have a 2nd version to be used with cage style chassis. It sits just behind the steering link but has a slightly steeper angle to it.
@@3flow9rc10 yeah it’s not anything you did wrong with it really. Just the horrible design of the servo mount and links lol. I was thinking I’d probably move it to my bronco because I plan to leave the body on that one.
I’d like to see your best builds in some sort of Shootout…. Comparing turning radius, max side/vertical hill, max descent angle, etc?
I’ll send you one of our lay down servo kits for the TRX-4M. It also comes with new steering links that run closer to the axle.
Very much needed! Can’t wait to check it out
@@2fmrc I sent you an email
It's funny, the servo looks like an outboard motor mounted in a buggy
Yeah kinda does lol
I can't unsee it now
Nice build... what battery are you running?
Thanks! It’s a palmbeachbots palm power pack. They have some really nice tiny batts.
palmbeachbots.com/search?q=lipo&type=product
Thanks!
Meus racing has a chassis coming and a flat soa mount too
Yeah I’m waiting on that servo mount lol
The injora 11kg servo are not waterproof, if you always run in dry area it ok. The carbon chassis look better than the titanium version :)
I haven't really considered a trxm before but now it's might be coming up someday. The servo looks whack, but it might look good with a 3d sleeve that makes it look like a V8. Seems a mistake to have the wires coming out the top for that configuration.
Is an absolute Beast man I definitely want to build 1 watch this so I can do it
The Lizard ultimate only puts out 8.4v if you run 3s also depending on how amp hungry the servo is it will brown out at the higher voltages.
Yeah I run 3s most of the time. Haven’t had mine brown out at all though. What servo was causing the brown outs?
@@2fmrc rs100m. It only really does it when I do the servo wiggle.
@@Steve_J81 ahh ok. Yeah I haven’t ran that servo just because a lot of people was saying they ran a bec with it for that reason. I don’t wanna add anything extra in these little trucks so I’m not running a bec lol. I normally just run the 6.5V anyway. Plenty power most of the time.
@@2fmrc I mainly used it because it was (at the time) only $5 more than the a20cls but now that the injora servo is out I will just run those from now on if they turn out to be good.
Looks like I need stock axles, driveshafts and transmission,hardware kit, from the TRX4M and that’s it.
Would you still consider this txr4 only thing it really has left is there axles correct
Axles,transmission and driveshafts. Pretty much it. Not sure if it’s still a Trx4m or not but I know it’s basically the only Trx4m I drive 😆
Looks pretty awesome, but yeah the servo well you can always glue a rubber ducky on There 😁😁👍 Or a super charger yeah
Looks awsome 👌
Matt can you compare the trx axles with fms like track width also would cool if they can be used on the monster trucks
Make a lay down servo mount?
Be nice to see that chassis for scx24 or the Caymen. I like it.
the servo looks cool. Think of it like the servo is the motor sticking out and the motor spinning is like the Transmation
No it just looks dumb to me lol. I lay them down if they aren’t hidden by the body. If I’m running stock body it don’t bother me too bad cause you don’t really see it much.
You have been busy! 🔥
Non stop! Lol
Looks great.
You should check out the Sagenmfg Manic Chassis.
I think I seen that one on Facebook at one time but never heard anything else about it. I’ll have to check in on it.
@@2fmrc It looks pretty good, fairly cheap to at only $45. I have one on the way, im going to put fcx24 portals under it.
@@Steve_J81 yeah I like the looks of it! Keep me updated on it
no propane tank on the site yet rip
i think its super cool! but theres just something i like about having a licensed body. and i think model cars are boring as they come to be honest but theres just something so cool about a C10 thats hacked up. but thats just me!! cool build !!
Where do I find the upper rear link piece and the front diff skid?
Is that the ogrcc servo
where do I get that ball bearing front steering
I wonder if this would work with the k high roller.
Love the channel Matt but man I'm burnt out on 24s the cost is getting to be out of control for what seems like to be that every company and parts companies are starting to seem like running out of ideas its all looking the same these days and may I add upgrades for 24s should not cost the same as 10s. I work at a local hobby shop the talk at ours and the sales numbers all been showing a peaking. Say a burning out. Like how 10s did few years back. Here in my area 10s are coming back in popularity. But I guess that's what is good about this hobby there's always something for someone to each there own.
Trx4M $150
Carbon chassis $60
Servo $50
Links $21
Metal diff covers $20
Metal gears $13
Steering link $14
Knuckles $20
C hub $17
Lizard ultimate $110
Brushless system $125
Treal wheels $35
Injora tires $17
Flow skid $25
Flow link riser $17
Total $694 before shipping
This build is awesome but way outside my price range for a micro.
@@OGMikey. i definitely get that but for me that’s almost the price a 1/10 rtr runs and then I start adding parts on top of that. My good 1/10s probably have $1200-1500 in them and I never even run them because I like the 1/24s more. So for me it’s like I’m saving money 😆 At least that’s how I like to think of it lol
You don't need to spend a ton of money on a 24 to have fun with it. I have several one is almost stock and is a blast to drive another has about 6 bills invested into it which isn't bad because when I build 1/10th crawlers I have that much just in axles and rims
@@xr70man I agree! I sometimes prefer to just run a stock truck. Something awesome about making tough lines with a stock truck. My completely stock rusted pumpkin fcx24 is definitely one of my favorites to drive. But we still always have to have a few that have the best of everything!
@@2fmrc couldn't agree more. It's all about perspective.
Dang. This video makes me want to get a trx4m. 😂
What battery's do you use
Matt, will this chassis work for aws?
I would think so but I haven’t tried it myself.
That servo is screaming for a set of headers and a turbo. It already looks like an engine block
Looks like the rear is overdriven
Every time I see one of those black servos it reminds me of an outboard motor!
Ya I know thats ridiculous, but just saying 🤓.
Haha! It does for sure
Why does my furitek cog when under any load or slip
Is it updated to the latest firmware? Throttle calibrated in the app? I’d also play around with the punch,startup power and throttle curve in the app.
@@2fmrc it’s at 2.19 and I’ve played all day with it and can’t get it to stop stuttering
@@50fiddymx is it Trx4m based? Axles, transmission etc. Are you running stock gears?
@@2fmrc I have the powerhobby aluminum transmission and the gears that came with it
@@2fmrc everything else is stock. I used the pinion gear that come on the motor
Now I could buy the motor and the chassis for like 200 or just buy a FURITEK cayman. And get arguably better performance.
IMO the servo is a waste of money. The extra power and speed is not needed in a 1/24, 1/18 crawler. A $10 emax does the same job.
No an Emax don’t come close to any of the servos I mentioned. No power at all compared to these. I won’t even buy an Emax anymore. There are so many fakes out there the last few I’ve had lasted about a wk.
Emax servo's are 💩👌
Good looking rig, but will still not buy a tx4m!
Don’t blame ya one bit 😆
Smart decision. Total junk.
Why spend the mony on a custom chassis and use the same shite traxxas electronics? For that matter why even waste money on the trx4m that you have to pretty much completely replace, just start clean and put it together the way you want it.
So true I'm so over all these companies ripping us off. I'm going back to trailing and 10th scale crawling I need a break foe 24
Yeah the Trx4m needs quite a bit out of the box to me. The fact they couldn’t even put bearings in it blows my mind lol
It looks like a great chassis EXCEPT for the front shock towers. They look like dongs. Literally any other shape would look better. It could also use adjustable upper link mounts.
First
Thank you so much! Really appreciate the comments!
Well I’m last and lastest here yay omg!
@@aaronscott2278 LOL
@@nolanhunt2011 :) now I’m last yay