@@mykitvideos5937 Hello.Can u explain me please,i have this same device,but it is confusing to me,since device is using alternating current, why does it matter which wire is live (+) and which one is neutral (-) ?. Or even better,if i just connect wires exactly like you did in video,but at the end i plug wires opposite than you did ,will it still work ?.
I am a lady,I have no idea how to connect the wire for SHT2000 to fertilization my egg. So you help me a lot. I completely understand how to do it. Thank you very much. I have a question, which port I have to put the small fan ? Is it will be at the same place of fog?
Is there a model that can control 1 device like a inline fan if temperature or humidity is too high since I use my inline fan if humidity and temperature gets too high but I can't find one where it uses both temperature and humidity in deciding to switch on 1 device
hi, i need to measure the temperature inside a container and the humidity outside. Is it possible to connect a separate temperature transducer from the one supplied by the house and use the double sensor only for humidity? if this is not possible, is it possible to connect and use only a probe temperature transducer for the measurement it needed? I could also do without measuring humidity. thanks!!!!!!
The sensor for this thermostat is 2 in 1 combined. You can't separate. You have to get a separate sensor I think, for the outside or inside to supplement
Hi master :) I bought 2 pieces. Could you tell me how to calibrate the STH2000 to another reference meter so that it shows the same value as it? Thanks.
What kind of crack pot wiring is that? Ive blown 2 units now, thought thw first 1 was my fault but i triple checked with the 2nd unit to exactly the same as your wiring and it also blew.
If you are talking about circulation of the air in the box then that fan should be working always. So u will connect it direct to power source. If you are talking about ventilation fan , it works according to time So you need some form of timer switch
You are the only one that was able to explain it for me in a very pacient and easy manner !! Thanks my friend !!
Thank you
@@mykitvideos5937 same! my mushrooms and me are very thankfull jejej
Good to hear
Thank you so much for the explanations! Calibration is not even mentioned in the manual, wouldn't know about it of you hadn't talked about it.
wow. glad I helped. thanks for your support
@@mykitvideos5937 Hello.Can u explain me please,i have this same device,but it is confusing to me,since device is using alternating current, why does it matter which wire is live (+) and which one is neutral (-) ?. Or even better,if i just connect wires exactly like you did in video,but at the end i plug wires opposite than you did ,will it still work ?.
Great.. So with this being your 141st video you will celebrate your 150th video soon.. congrats in advance
Thanks
Ow so you are hitting 200 videos soon.. Ow wooow.. congrats
Yes ooo. Thanks bro. That video you did about the TINIEST AQUARIUM should be trending by now. I love that video
This
ua-cam.com/video/EBx-_TO_GKU/v-deo.html
I am a lady,I have no idea how to connect the wire for SHT2000 to fertilization my egg. So you help me a lot. I completely understand how to do it. Thank you very much.
I have a question, which port I have to put the small fan ? Is it will be at the same place of fog?
Thanks. Good to know my video was helpful. First, tell me the purpose of the fan you are talking about.
We can whatsapp on +233505761940
What is placement of the humidifier and sensor in the incubator?
Depends on the layout of the Incubator
I like to place it around the eggs that are closest to the heater
Is this humidity sensor already factory calibrated?
Is there a model that can control 1 device like a inline fan if temperature or humidity is too high since I use my inline fan if humidity and temperature gets too high but I can't find one where it uses both temperature and humidity in deciding to switch on 1 device
Yes. Check out the ZL7801D
hi, i need to measure the temperature inside a container and the humidity outside. Is it possible to connect a separate temperature transducer from the one supplied by the house and use the double sensor only for humidity? if this is not possible, is it possible to connect and use only a probe temperature transducer for the measurement it needed? I could also do without measuring humidity. thanks!!!!!!
The sensor for this thermostat is 2 in 1 combined. You can't separate.
You have to get a separate sensor I think, for the outside or inside to supplement
@@mykitvideos5937 yes thats what i wont to do! Its possible? If it is.... how?
How accurate is the humidity sensor?
Can this installation be used in version 12-72v ??
Yes. Same pattern for 12v
@@mykitvideos5937 Thank you so much for responding !!
Welcome
Thanks for the videos. How much should we adjust the calibration settings
Please what’s the name of the heater you used here, not the Led bulb
PTC heater
Hi master :) I bought 2 pieces. Could you tell me how to calibrate the STH2000 to another reference meter so that it shows the same value as it?
Thanks.
Same method here ua-cam.com/video/uqYAXOyZYEM/v-deo.html
@@mykitvideos5937 it works, ThY :)
Welcome
OK so 1 device can only be controlled by 1 parameter like temp as example.. Can I connect 1 device to both the humidity and temperature ports?
Yes but you have to get the wiring correct
@@mykitvideos5937 is there a way to contact you
Whatsapp
+233505761940
Gracias a tu aporte y apesar que está en inglés, lo logré!! Tienes una suscriptora ;)
شكرا على الشرح بارك الله فيك
🙂
What kind of crack pot wiring is that? Ive blown 2 units now, thought thw first 1 was my fault but i triple checked with the 2nd unit to exactly the same as your wiring and it also blew.
Muchas gracias me fue muy muy util
ey up boss are those heaters in video any good
Yes they work well for me.
There is this one i have been using for 8months. It still works
@@mykitvideos5937 fantastic have you got a link to your shop to buy it do they come in different amps
Which country are you from
@@mykitvideos5937 from uk luv
@@mykitvideos5937 im from uk
Sir how about the fan. Wer connected. .
I would like to know too
Which fan. What is the purpose of the fan you are talking about
I saw many they put a small fan into incubator to flow the air,oxygen will bring the better % to fertilization.
Then this controller cannot control that fan.
If you are talking about circulation of the air in the box then that fan should be working always. So u will connect it direct to power source.
If you are talking about ventilation fan , it works according to time So you need some form of timer switch
Good job many thanks 😀
Thank you too
Thanks💙
Welcome
I tried with stc but fan is not running
Which STC
STC1000???
ua-cam.com/video/lmc2Y3A8C-Y/v-deo.html
very helpful, thanks to you.
Thanks for supporting.
Please have you subscribed
@@mykitvideos5937 yes I have, what are the settings for dehumidification for this device
@@snj2024 for dehumidification, you just need to do the opposite.
Up for upper value and DOWN for lower value
@@mykitvideos5937 Thanks lot, i need this device for solar driers.
Ok. Do you know where to buy from
Thanks so much
Welcome
Fan is not running