The amount off 300 tdi engines that have overnight timing belts in the world when they don't need to be prob premature wear on them I've had a few in and there was 0 movement in the belt great vid Mike donny
Hi Mike really informative thank you, one question though is this the same procedure for the 200 TDI engines as well ? Keep up the great work my friend
Hi Mike! Amazing job,looks brand new. look, what if some not so trusted mechanic did the Timing of the diesel pump on the second slot of the flywheel. would it be possible? We have a 300tdi that since it came from this mechanic has all kinds of problems, sounds very rough, does not have power no matter how much smoke it makes, and if you road it, it gets hot. Please tell me what you think! You're the best! 🫡
@@BritannicaRestorations thank you for your answer Mike! Amazing how many people you've helped to this day! I guess I'm going to do it myself! Best regards from Portugal!
Mike, when you had the engine locked at TDC and pin locked in IP, your camshaft timing marks didn't appear in line? Chasing a 300tdi issue that has good low down power but is dead above around 2600rpm. Possible camshaft timing?
when you put the new seal in the timing cover which way? from the bacK? Im fighting oone here and can't keep it square from either side. grease it? tx.
There are 2 styles of 300 Tdi timing cover, one has a shoulder in it and should be fitted from the inside - the other is parallel Usually no problem fitting
Thanks Mike, this is straight through and only the back has a surface to use as a datum to press against. did you do a video about that seal? @@BritannicaRestorations
Lovely to watch this motor come together, Mike.
Very satisfying to watch a capable and knowledgeable pair of hands at work.
Glad you enjoyed it
I found this really helpful. It was also useful to see all around a clean engine. Thanks Mike.
Very welcome
SO NICE TO SEE THE JOB DONE RIGHT. A REAL PLESURE TO WATCH YOU MIKE. YORKSHIRE ROB.
Cheers Rob!
Thanks!
Thank you !
nice job Mike
Too true on the aftermarket breather hose! ! !
Hi Mike, What's the difference between a non and EDC flywheel locking pin please?
Don't know -- never seen an EDC engine
good work
Thank you! Cheers!
such a great video , thanks for all the tips. How did you get the engine components and block looking so clean? It looks brand new!
Steam cleaner, sand blaster and vapour honing machine - and a lot of time!
Mate thanks so much very professional and informative 👍👍👍👍👍🇳🇿🇳🇿🇳🇿🇳🇿🍺🍺🍺🍺
Glad you enjoyed it
The amount off 300 tdi engines that have overnight timing belts in the world when they don't need to be prob premature wear on them I've had a few in and there was 0 movement in the belt great vid Mike donny
Yes 11Nm does not seem much !
I’m soon to be having a new belt on a 300 tdi.. should I be taking it steady for a while or just drive it normally straight away?…
Hi Mike really informative thank you, one question though is this the same procedure for the 200 TDI engines as well ? Keep up the great work my friend
Similar - depends on if it is a Defender or Discovery - the timing pins are the same
Mike - can you provide a link to where you got the hose kit from?
shop.stoneyracing.com/land-rover/defender-300tdi/
Very interesting thanks.
Glad you enjoyed it
Do you have a trick for fitting the camshaft oil seal ? I'm sure you have mentioned that they are a problem before?
I seem to have mislaid that video - I will do an explanation today
Did you ever find the footage of camshaft oil seal fitting? Did you say you had a special tool for this
🐨 Nice one m8 👍 keep em coming
💂
Thanks, will do!
Hi Mike! Amazing job,looks brand new. look, what if some not so trusted mechanic did the Timing of the diesel pump on the second slot of the flywheel. would it be possible? We have a 300tdi that since it came from this mechanic has all kinds of problems, sounds very rough, does not have power no matter how much smoke it makes, and if you road it, it gets hot. Please tell me what you think! You're the best! 🫡
It would not start on the second notch I would have thought - 90 degrees out - sounds like the belt is off a tooth
@@BritannicaRestorations thank you for your answer Mike! Amazing how many people you've helped to this day! I guess I'm going to do it myself! Best regards from Portugal!
You must get a helmet for the flying injectors 🫣😂
Mike, when you had the engine locked at TDC and pin locked in IP, your camshaft timing marks didn't appear in line? Chasing a 300tdi issue that has good low down power but is dead above around 2600rpm. Possible camshaft timing?
If the cam timing is out you will probably have the pistons hitting the valves
How many Nm you have set the tensioner ?
11
Any quick tips for removing that crank nut please. Engine is out of the car.
I have a 1-inch drive air gun - If you cannot lock the flywheel, then it's sump off and block the crank with a lump of wood
@@BritannicaRestorations trying to take it off. looks like a crank locking tool is in order.
when you put the new seal in the timing cover which way? from the bacK? Im fighting oone here and can't keep it square from either side. grease it? tx.
Do you mean the outer cover or the inner/oil pump
The outer cover. @@BritannicaRestorations
There are 2 styles of 300 Tdi timing cover, one has a shoulder in it and should be fitted from the inside - the other is parallel
Usually no problem fitting
Thanks Mike, this is straight through and only the back has a surface to use as a datum to press against. did you do a video about that seal?
@@BritannicaRestorations
J Saville was very warped ' guys and girls '
You seem to have an indepth knowledge of someone warped! 🤔
Nice job. Tight as a g-string!
Thank you kindly!
4 03 super dzień
Hallo