I Caved & Bought a GoXLR for my Shure SM7B

Поділитися
Вставка
  • Опубліковано 1 лип 2024
  • GoXLR: geni.us/NDUdW
    GoXLR Mini: geni.us/xwj1NMw
    Shure SM7B: geni.us/Jddi
    0:00 - Audio Interface Requirements
    3:13 - Alternative Interfaces
    5:40 - GoXLR vs GoXLR Mini
    7:30 - GoXLR Configurations
    11:08 - GoXLR Stand
    SoundBlaster AE-9: • SoundBlaster AE-9 Prem...
    My UA-cam Gear kit.co/SuprUsrStan
    My Amazon Storefront: www.amazon.com/shop/suprusrstan
    As an Amazon Associate I earn from qualifying purchases.
  • Наука та технологія

КОМЕНТАРІ • 15

  • @hlcconline1824
    @hlcconline1824 2 роки тому +1

    SuprUsr Stan is there any reason you did not go with the Universal Audio Volt series of interfaces? They have enough drive power for the mic and they're a hundred to a few hundred dollars cheaper. Just curious

  • @adam1st-
    @adam1st- Рік тому

    What would you prefer the goxlr or the new rodecaster 2 ??

  • @BloodMage87
    @BloodMage87 Рік тому

    how it is driving your ADAMs ?
    how good is the dac inside of go xlr?

  • @fredericgagnon9118
    @fredericgagnon9118 8 місяців тому

    hi there, nice reviews :) , i got the soundblaster ae-9, the goxlr, the beyer dynamics dt 1990 pro and the shure sm7b, looks like i can't use routing and faders since the sounds comes out of the ae-9 and not the goxlr, do you have any ways to make them all work together plz? tyvm(beyer dynamics are connected in the ae-9 and the sm7b in the goxlr)

  • @mike212916
    @mike212916 Рік тому

    I have a 300ohm headphone so I need to use an amp. I have a dac/amp combo. Where do I add it into the goxlr?

  • @Faith-Ministries
    @Faith-Ministries 2 роки тому +3

    When you use the GoXLR without the cloudlifter then u have to push the gain on the xlr to almost 90% and you CAN tell the difference, easily… if you’re looking for quality don’t cheap out. Get the cloudlifter with the goxlr and you WILL hear the quality 😜😜

    • @Killerwins88
      @Killerwins88 Рік тому

      Do you swap to condenser mic on the go xlr with the cloud lifter? Where would you put the gain on the go xlr with the cloudlifter?

    • @KamFPS
      @KamFPS Рік тому

      @@Killerwins88 The cloudlifter adds 25db so you’ll probably want to set your gain to 30-35 if you wanna get the 60db that shure recommends. And yes set your mic input to condenser instead of dynamic.

  • @itsmepipe
    @itsmepipe 2 роки тому

    What isoacoustics stands are you using with the A5X? i have the same studio monitors and i want to buy a pair of those

    • @SuprUsrStan
      @SuprUsrStan  2 роки тому

      These Size: 6.1"W x 7.5"D: amzn.to/3LzEk8A

  • @thaddeusgriffin4858
    @thaddeusgriffin4858 2 роки тому

    Are you still using nvidia broadcast now that you have the go xlr?

    • @SuprUsrStan
      @SuprUsrStan  2 роки тому

      The GOXLR doesn’t have noise reduction so I do layer a bit of it on top of the goxlr. You don’t need much because the sm7b rejects a lot of noise already.

  • @haies09
    @haies09 2 роки тому

    Nice! I’ll take the stand off your hands 😊

  • @Ramiracles
    @Ramiracles Рік тому

    Elago huh

  • @reddeadryan78
    @reddeadryan78 Рік тому

    ELGATO* NOT elago