Haven't tried it yet but the mercedes 13 inch rotor are supposed to fit without drilling cause the studs on the merc are bigger. Need new pads and im ready to install. Would like to know are you using stock brake line
Yes the Merc rotors would be best but you will need huncentric rings as the ID of the Merc hub is larger than the OD of the Supra hub. I am using the driftmotion brake lines. Fit perfectly.
The calipers bolt directly onto the original brake holes. You will need the correct bolts for the MB calipers as the Toyota ones are different thread pitch. You need to buy a brake line kit (driftmotion sells the hard lines). I have been told that you can get R350 rotors and get them re drilled to 5x114.3 and you dont need spacers. Im using 350Z track (Brembo Package) rotors with spacers at the backside of the caliper. Good luck!
The r350 rotors don't require you to redrill the bolt pattern. Running that current setup.
Hey homes where did you buy the front A arms from
Where did you get those rotors? Im about to fo the same upgrade but can't find where to purchase them. Maybe a link? Thanks
Where did you get the upper control arm? Rock Auto are out
Haven't tried it yet but the mercedes 13 inch rotor are supposed to fit without drilling cause the studs on the merc are bigger. Need new pads and im ready to install. Would like to know are you using stock brake line
Yes the Merc rotors would be best but you will need huncentric rings as the ID of the Merc hub is larger than the OD of the Supra hub. I am using the driftmotion brake lines. Fit perfectly.
ok thanks
What are the brakes? Is it from merc s500?
Yep
Bill Brasky great, want to do the same. Can you tell, was it an easy swap? Do I need some spacers or it's like bolt on?
Thanks
The calipers bolt directly onto the original brake holes. You will need the correct bolts for the MB calipers as the Toyota ones are different thread pitch. You need to buy a brake line kit (driftmotion sells the hard lines). I have been told that you can get R350 rotors and get them re drilled to 5x114.3 and you dont need spacers. Im using 350Z track (Brembo Package) rotors with spacers at the backside of the caliper. Good luck!
Bill Brasky thanks, start tuning with replacing brakes sounds good, this will be definitely better than stock
Yep. Just as important to be able to stop when you want to.
Not a 32mm. More like a 36mm