Genius! I was thinking using for this cheap solar controller from ali set to output 24V. Advantage would be that it will still follow the optimal charge curve from the solar panel thus improving efficiency especially when there is less light. But I have step down converted already and solar controller needs to be ordered.
I still have it and it is working. I am only using this periodically, and the most frequent use if to provide UPS support for my 3D printer. I have not used it for heavy loads. For most of the power tools, it is not powerful enough, and for lighter tools and lamps, it has plenty of power.
Can you show us something we can buy on Amazon something portable that we can use when we are moving our panels around portable panels why we're traveling
Awesome video! I've been searching all over for an example like this. So just to clarify, the bluetti will get damaged if getting charged directly from a 300 watt panel?
Control charger for dummies ,I'm looking to buy a portable controller charger that will take my 200 watt all power portable solar panel down in voltage,so I can charge my blue EB3A but I'm confused on which one can I buy on Amazon that's plugged and ready to go, but also will work on my 200 amp lithium battery in my RV control charger for dummies that's what I'm looking for
Szia! Hű, szuper ez a videó, de esetleg nincs kedved egy ilyet magyarul is csinálni? :) Aki összerakná nekem, az angolul nem tud, én meg műszakiul nem beszélek 😂 Vagy ha van bármi tipped magyar nyelvű anyagra, ami segíthet az összerakásában (mert tényleg nem tűnik egy über bonyolult dolognak), azért is nagyon hálás lennék.
Főleg most így télen ez nehéz lesz, de nagyon egyszerű a dolog. Ott van a linken a cucc amit megvettem. És csak az a trükk, hogy a rajta lévő potit addig kell tekerni amíg a kimeneten a feszültség 28V lesz. És utána a többit a Bluetti már elintézi.
@@csongorvarga so if voltage not more than 28v is safe but ampere is automaticaly top at 8,5 right??? Sir one more question if i use this bluetti as supply for my fish everyday with plug to ac and sollar panel its safe??
@@putrafirst Yes, Bluetti will not draw more than 8.5A from solar, so Bluetti regulates the power draw. Yes, so can have the solar panels and AC plugged in at the same time.
Genius! I was thinking using for this cheap solar controller from ali set to output 24V. Advantage would be that it will still follow the optimal charge curve from the solar panel thus improving efficiency especially when there is less light. But I have step down converted already and solar controller needs to be ordered.
Good stuff! Thanks for sharing.
This answers my question. Thanks!
Do u still have this eb3a? Is it still working well 1 year after u posted this video? Do u use it everyday and do u use it for heavy load ?
I still have it and it is working. I am only using this periodically, and the most frequent use if to provide UPS support for my 3D printer. I have not used it for heavy loads. For most of the power tools, it is not powerful enough, and for lighter tools and lamps, it has plenty of power.
Can you show us something we can buy on Amazon something portable that we can use when we are moving our panels around portable panels why we're traveling
Awesome video! I've been searching all over for an example like this. So just to clarify, the bluetti will get damaged if getting charged directly from a 300 watt panel?
No, it just ignores the input and will not charge at all. I tried.
Control charger for dummies ,I'm looking to buy a portable controller charger that will take my 200 watt all power portable solar panel down in voltage,so I can charge my blue EB3A but I'm confused on which one can I buy on Amazon that's plugged and ready to go, but also will work on my 200 amp lithium battery in my RV control charger for dummies that's what I'm looking for
Que uso tiene el convertidor de DC a DC ??
What gauge wire did you use here?
@@Zbee167 Same gauge as the supplied solar charge cable.
@@csongorvarga Ok
Can I use a 100w, 120w, 160 watt panels?
Sure. Bluetti supports up-to 200W panels directly. Those you can plug in directly without the DC-DC converter (in most cases)
@@csongorvarga very helpful. Thanks!
Szia! Hű, szuper ez a videó, de esetleg nincs kedved egy ilyet magyarul is csinálni? :) Aki összerakná nekem, az angolul nem tud, én meg műszakiul nem beszélek 😂 Vagy ha van bármi tipped magyar nyelvű anyagra, ami segíthet az összerakásában (mert tényleg nem tűnik egy über bonyolult dolognak), azért is nagyon hálás lennék.
Főleg most így télen ez nehéz lesz, de nagyon egyszerű a dolog. Ott van a linken a cucc amit megvettem. És csak az a trükk, hogy a rajta lévő potit addig kell tekerni amíg a kimeneten a feszültség 28V lesz. És utána a többit a Bluetti már elintézi.
hows the ampere:? step down tom
Current is regulated by Bluetti. It will automatically top at 200W
@@csongorvarga so if voltage not more than 28v is safe but ampere is automaticaly top at 8,5 right??? Sir one more question if i use this bluetti as supply for my fish everyday with plug to ac and sollar panel its safe??
@@putrafirst Yes, Bluetti will not draw more than 8.5A from solar, so Bluetti regulates the power draw. Yes, so can have the solar panels and AC plugged in at the same time.
@@csongorvarga i try eb3a when using panel and ac when fully. Battery the panel not transfer the power they. Use grid ac bypas😅😅