VST CONNECT - All you need to know (2020)

Поділитися
Вставка
  • Опубліковано 27 кві 2020
  • #vstconnect #cubase #steinberg
    VST CONNECT - All you need to know (2020)
    VST Connect Pro is a Remote Recording Solution for online collaboration for home studios and musicians.With VST Connect, you can set up a recording session and work remotely with artists from around the world recording MIDI and High Quality audio.
    In this video I will show you everything you need to know about VST Connect Pro to be able to run a successful remote online recording session in Cubase.
    I also give a look at a remote recording sessions I did with 4 of my friends from Montreal to Nashville recording a quick piece of music using VST Connect Pro in Cubase.
    new.steinberg.net/vst-connect/
    VST Connect SE vs PRO:
    new.steinberg.net/vst-connect...
    Thanks to my good friends for their participation in this video.
    Simon Walls
    simonwalls.com/
    • Simon & Greg Record Th...
    Jimmy Lahaie
    jimmylahaie.com
    / lahjim
    Matt Nantel
    notesproductions.com/
    / @notesprod
    Lij Shaw
    recordingstudiorockstars.com/
    / @recordingstudiorockstars
    ►► Get access to the MIXDOWN ZONE for FREE and
    get your FREE MIX CUBASE TEMPLATE and MULTITRACKS
    mixdown.online/en/get-in-the-...
    GET IN TOUCH WITH ME
    ►► Get FULL CONTROL over CUBASE with
    THE ULTIMATE GUIDE TO CUBASE
    theultimateguidetocubase.com
    Instagram: / mixdownonline
    Facebook: / mixdownonline
    Twitter: / mixdownonline
    Website: mixdown.online
    ►►Distrokid: Get Your Music On Apple Music, Spotify, Tidal (Get 7% OFF on your first year) →distrokid.com/vip/mixdown
    Some of the gear and plugins I use in the studio:
    ►►WAVES PLUGINS Save 10% with the following link: www.waves.com/r/7vejtz
    ►►ACCUSONUS ERA-BUNDLE website accusonus.com/products/audio-...
    ►►THAT SOUND DRUM SAMPLES Save 10% with the following link:
    bit.ly/2ugqCCp
    DAW CONTROLLER: geni.us/vzjM
    CAMERA geni.us/u2PLl
    MICROPHONE geni.us/D9hDL
    CAMERA MIC geni.us/nkB8z4e
    LAVALIER MIC geni.us/lavalierMic
    POP FILTER geni.us/8AnqW7A
    STUDIO MONITORS geni.us/iiTMh2
    HEADPHONES geni.us/cdABhtw
    STEINBERG LICENCE KEY geni.us/a9Gcee5
    CUBASE 10.5 geni.us/yWzl5fa
    STUDIO MONITOR CONTROLLER geni.us/x7oDRh
    STUDIO LIGHTS geni.us/yi8S5T

КОМЕНТАРІ • 299

  • @stevecarrAB
    @stevecarrAB 4 роки тому +1

    That was a great improvement you made with the drum beat after you recorded the slide guitar part! And thank you for the informative VST Connect tutorial.

  • @kevinwilliams4855
    @kevinwilliams4855 4 роки тому +1

    Just what I needed my friend! I will look into this in the coming days/weeks. 👌🎸
    Cheers Chris 👍😎

  • @jamesleaburn246
    @jamesleaburn246 4 роки тому +2

    Can't tell you how useful this was. I wish I had this when I first started using VST Connect. Thanks.

  • @AllisterBradley
    @AllisterBradley 4 роки тому +3

    Thank you, Chris. I'm just getting started with VST Connect PRO and you've cleared up a lot of confusion. I'm confident about initiating a session with my remote musicians now!

  • @starsandguitars2050
    @starsandguitars2050 4 роки тому

    Thank you very much Chris. You've answered many of my questions. I plan to try this...

  • @janmage78
    @janmage78 3 роки тому

    I'm about to start working on some virtual sessions using VST Connect in a few weeks. I have a feeling I will be coming back to this video a lot. Thanks so much Chris. You always have excellent content on your channel. Whenever I learn something new about Cubase or DAWs in general, there is about a 90% chance I got it from you. The other 10% is purely having done something on accident :-). Thanks again!

  • @sunpathviewer
    @sunpathviewer 4 роки тому +3

    Thank you for making this for Chris. My friends and clients have been reluctant to use VST-connect. I'll keep you posted on whether this critical valuable video can conquer the procrastination plague that ills my artistic communities. Peace Chris.

  • @georgephilis
    @georgephilis 4 роки тому

    Will need to try this after I set up my studio (still in the making). Watching this video made me realize I had underestimated this function. Good job 👍

  • @GenuineHeather
    @GenuineHeather 4 роки тому

    Wow. Thank you for explaining this feature so well. This could be a game changer.

  • @carlosalmeida7174
    @carlosalmeida7174 4 роки тому

    I wasn't using it, but now I´m planning to! Thank you once again Chris!!

  • @cnpcreative
    @cnpcreative 3 роки тому

    Thank you for sharing this info!
    I have VST Pro just waiting to start collaborations. You answered all of my questions. Thank you!

  • @vocalead
    @vocalead 3 роки тому

    Thanks so much for another super comprehensive video on a topic that is not so widely available on YT.

  • @paulrucker1889
    @paulrucker1889 4 роки тому

    Nice to see it in action. Figured out today how to set up with a friend at the other end. Tomorrow will try out more feature with someone else. Then on to do recording sessions, this really helps, thank you much for posting this.

  • @fernandorivera6360
    @fernandorivera6360 4 роки тому +1

    Manna from Heaven! Thanks, Chris!

  • @davehulse5027
    @davehulse5027 4 роки тому +1

    Great tutorial. as a newcomer to Cubase there's a lot to learn, and this video was really clear. Great for "lockdown"

  • @psychotrout
    @psychotrout 4 роки тому +6

    Oh! Finally someone that talks about it!

  • @stevedonalson5675
    @stevedonalson5675 2 роки тому

    Excellent and very thorough coverage. Will use VST Connect between may main studio and our remote.

  • @PatrickSchouten
    @PatrickSchouten 4 роки тому

    Thanks for this great video. First how to set it up, but also to see it working. I will use it soon

  • @rolandgerard6064
    @rolandgerard6064 4 роки тому +1

    This is one video to be watched multiple times.

  • @mattwood75
    @mattwood75 3 роки тому

    Great walk-through, thank you Chris!

  • @SomebodyPickaName
    @SomebodyPickaName 6 місяців тому +2

    Thank you, Chris! One thing I would like to add is the importance of sending the cue mix sends of each channel in Cubase back to the performer so they can hear the music. I'd never used the control room before in Cubase (never needed it) and so when I tried VST Connect Pro yesterday, I had to train myself to enable the cue send for VST connect on every new audio track in the session, otherwise the performer couldn't hear it.
    The other thing was the "master" fader not being automatically assigned to the performer's main outputs, so I had to set that manually as well. But all of my other questions, you answered! I'm very grateful!

    • @iggydip
      @iggydip 6 місяців тому

      I am having the problem with the performer. I can hear them and record them but they cannot hear anything from my side including talkback, metronome or any music I have written my end. The meters show activity in the control room but that’s as far as it gets. I will try what you say.

  • @rasolzamini8678
    @rasolzamini8678 2 роки тому

    Thank you Chris for an excellent introduction to VTS connect.

  • @sINGLE_hANDED
    @sINGLE_hANDED 4 роки тому

    Great video Chris!
    Many thanks for sharing your experience on it
    I'm now looking forward to try and test the VST Connect SE included in my Cubase 9 Pro software!

  • @kenboome864
    @kenboome864 4 роки тому +1

    Chris, I downloaded the Manual. Then I added yellow pages to my binder, and went thru your wonderful/detailed/ and thorough Tutorial on a piece of software that is critical to understand and have. You are the GOLD standard in Cubase Understanding. While I will study the whole tutorial at least 3 more times, unlike everybody else (besides Ondo) you pre-answer every & all questions and stumbling blocks for us before they even happen. You really are helping all of us make better music, faster. Your "detail" is exactly what's needed. Thank-You

  • @gospelmuvgospelmuv
    @gospelmuvgospelmuv 4 роки тому

    Thanks Chris, I really enjoyed it. VST connect is interesting and I hope to use it in the near future. Cheers!

  • @francoismacchiagodena1747
    @francoismacchiagodena1747 Рік тому

    Merci pour ce magnifique cours. Je viens de retourner avec Cubase depuis plusieurs années et je suis grandement satisfait!!!

  • @ricardomatamoros9854
    @ricardomatamoros9854 4 роки тому

    Men, you are awesome. thanks a million.

  • @Jin-st3mt
    @Jin-st3mt 4 роки тому

    Great video, I wasn't sure of giving a go to this thing, I think it will be very useful to me. It seems to be an awesome feature.
    Thanks

  • @vonotebook
    @vonotebook 4 роки тому

    Merci ! Le meilleur tuto VST Connect ! :)

  • @drumz47
    @drumz47 3 роки тому

    HI CHRIS
    Just getting started and I reaLLY appreciate your tutorial as it helps tremendously. Just a reminder when you do these sometimes you move your mouse a little too fast but what a great session .Thank you so much.

  • @blakebrothers
    @blakebrothers 4 роки тому

    Very helpful - especially for the Covid tunes! Thanks

  • @shmoto
    @shmoto 3 роки тому

    You answered many questions. Thank you so much for posting this!

  • @KaseyChiu
    @KaseyChiu 2 роки тому

    Thanks for your video Chris!
    Vst connect is seems to be a big solution to distant problem and collaborations!

  • @patndown
    @patndown 3 роки тому

    Super helpful tutorial, about to start using myself.

  • @dane4890
    @dane4890 2 роки тому

    Love it, thank you man! 😁🎵

  • @yvespicard890
    @yvespicard890 4 роки тому

    De loin le meilleur vidéo sur VST Connect. Félicitation Chris !!!

  • @wolfgangleiter
    @wolfgangleiter 4 роки тому

    Hey Chris, Great Explanations... Now I understand, how it works ! I think the most important thing is, to understand, how the datastreams are organized and which knob changes things on which side.... I think I'll by the Pro version..... stay healthy all together..... Wolfgang

  • @BruceWalker51
    @BruceWalker51 4 роки тому +1

    Wow what a great video! Thank you for the information,I'm just now starting to use this part of Cubase connect pro with a friend of mine in California.

    • @mixdownonline
      @mixdownonline  4 роки тому

      You're very welcome! Hope it you enjoy working with VST Connect!

  • @vonotebook
    @vonotebook 3 роки тому

    Best video to understand this fabulous technology.

  • @chrislok7477
    @chrislok7477 3 роки тому +1

    Great video...thank you! I have done a few VST Connect SE sessions w/ singers from NYC and Vancouver and I watch this video before each session to remind me about how to set it up properly. It works great but I agree w/ your comment at the end of your video: it takes awhile to get it working properly. Thanks again for this and for your other informative Cubase videos!

  • @QuaverloveStudio
    @QuaverloveStudio 3 роки тому

    I'm SOLD! The possibilities are endless!
    Gonna start with the SE version until I'm able to purchase Connect Pro.
    Thanks, once again, Chris. Another Cubase dark room lit up!

  • @digmas1
    @digmas1 4 роки тому

    Great video... looking forward to checking this out... been looking for way to do this. Thanks Chris

  • @firegoggles
    @firegoggles 5 місяців тому

    I know this is old but man this was such an incredible tutorial wow!!! THANK YOU!

  • @arunachalamusic
    @arunachalamusic 4 роки тому

    thanks Chris. Fantastic tutorial!

  • @michelgoernert
    @michelgoernert 3 роки тому

    Thank you for the great video.

  • @howlerbike
    @howlerbike 4 роки тому +8

    I've been wanting to try this, but like you said, there's a steep learning curve. So thank you for cleaning the window I was looking at it through and removing the big pile of gravel that was in front of the window.(:>)

  • @DocTheGuitar
    @DocTheGuitar 3 роки тому

    Thank you, very, very helpful

  • @bookstuart
    @bookstuart 3 роки тому

    Thank you Chris for an excellent introduction to VTS connect. Clear and concise. I had to watch your video a number of times to get my head around it but it was worth it. I have a friend in Canada (lm in Germany) and we want to record her on oboe and me on piano and your video has given me the incentive to try it using VST connect. As she has no experience with computers I will have to setup a performer account on another computer and try out the setup before teaching her remote what to do. I’ll get back to you and let you know how we get on. Thanks again. Will check out your other video know. Regards Brian

  • @FransvanAken
    @FransvanAken 3 роки тому

    I used this week VST Connect for the first time to explore the possibilities and it is exactly how you said: it will allways better to have a inhouse recording but now in time of corona it is a very helpfull tool!

  • @tommckeown6970
    @tommckeown6970 4 роки тому

    i picked up VST Connect Pro over the weekend. The documentation is poor and the learning curve is kind of high, but once I understood what it is supposed to do (and why) I was able to get it going and have had a few sessions already. Thank you for this! For a future episode, maybe you can go over troubleshooting VST Connect. I stumbled on fixes for my problems but it took a while.

  • @studentsmusic
    @studentsmusic 4 роки тому

    As a cubase pro i must say absolutely competent and great explanation of this at first sight complex tool that offers so much possibilities. Absolutely what i was looking for and thanks for this professional video. I hope they will fix the ios performer app to the new login procedure without sending a key (may 2020) then i will use it in my seminars with students. Anyway great vid, great guy, great friends.

  • @audiobassment
    @audiobassment 4 роки тому

    Great video. Thank you 👍

  • @thierrypilot4655
    @thierrypilot4655 4 роки тому

    I dreamed of it, and Chris did it. Bravo Chris et merci beaucoup

  • @Frank.Zimmermann
    @Frank.Zimmermann 4 роки тому

    Hey Chris, that was great fun! 👍 At some point I have to upgrade to 10.5 and try VST Connect Pro. Never had online collaboration, but it's definitely a great thing I'd like to try out. But first I have to finish some projects. Looking forward to seeing you in the next video!! Bye for now! 🙂

  • @raynaldomartine
    @raynaldomartine 3 роки тому

    THANK YOU for this video!

  • @LiebnerZappleProject
    @LiebnerZappleProject 3 роки тому

    Thanks. That was very helpful!

  • @Ehabmxd
    @Ehabmxd 4 роки тому

    Thank u chris.. Ur video is awesome i like the musicians also its really good job.. u explain everything in this video for beginner and professional.. 🌹

  • @FaridRoland
    @FaridRoland 4 роки тому

    Awesome 👏

  • @jimsmith4611
    @jimsmith4611 2 роки тому

    Another well explained and helpful video Chris thank you...!! Used VST Performer and connect pro last night with a friend . Had some issues withthe tqalkback in terms of he could hear me while couldn't hear him. Then I could hear him but he couldn't hear me. There was a short period where it worked perfectly but this was only for a couple of minutes.. We'll continue to work at it. Wondering if there is there anything obvious that we have missed ...!!

  • @lucusgold
    @lucusgold 4 роки тому

    Great stuff, thank you:)

  • @ghostdawg57
    @ghostdawg57 4 роки тому

    this is great thanks so much for this

  • @xXValomatXx
    @xXValomatXx 4 роки тому

    Nice that someone finally explaines this. there are some videos out, but they are all kinda really old. BUT I think you missed to explain on the main source of all problems with this : The part where you show detailed adjustments for the talkback setup on both sides, the part where you show how to exactly choose the audio card and the relevant outputs and an example how to send the cue mix to the performer side. This is where after my experience 95% of all users fail to use this ! They simply don't get it right with the talkback and the cue sends... and where to manually insert the vst connect plug ins for a better understanding. would be interesting to see, if I'm right there and users leave their experience with this in the comments...

    • @mixdownonline
      @mixdownonline  4 роки тому +1

      I think that was clear with the process, but if I get a lot of questions in the coming days and weeks about this, I'll be more than happy to do a follow up video :-)

  • @Mr_Matrix
    @Mr_Matrix 4 роки тому

    Thanks a lot! 😃👏

  • @MonteMusicChannel
    @MonteMusicChannel 4 роки тому +1

    Thank you for that video. It clearifies the whole thing a lot since the manual wasn't written that well. It would be great if you could show a drum recording session as well. I guess that the musician has to set the phase for each channel already correct from his side.

    • @mixdownonline
      @mixdownonline  4 роки тому

      Yes, the musician would have to work the phase out on his side

  • @stix2slivers
    @stix2slivers 4 роки тому +1

    This lesson will be watched a few more times, When this was first out a few years ago I was at Long and McQuade in Toronto at the Cubase users group. Nice work Chris, Still pretty deep but would love to try it. You used midi for the drums correct. Cheers and keep up the awesome education clips :-) Sincerely, Bruce

    • @mixdownonline
      @mixdownonline  4 роки тому

      Yes I used programmed drums for this one :-)

  • @Dnfosberry
    @Dnfosberry 2 роки тому

    Merci très utile daniel ville de Bordeaux
    🙂

  • @BarunNafak
    @BarunNafak 4 роки тому

    Nice...

  • @davidn.7767
    @davidn.7767 4 роки тому +1

    Thank you thank you thank you....Steinberg's most recent setup video is just horrible. Needed this and I hope they will see this. If they want people to use the program they should have put time into troubleshooting and the whole process.

  • @petermoonband7181
    @petermoonband7181 4 роки тому +2

    Chris thanks for these great videos. I've been having great success tracking individual things like vocals using vst connect se. Have worked from Nashville with friends in L.A. and Tampa. A buddy in Miami has the VST Pro app and we are trying to track an acoustic drum kit. We got as far as setting up 8 mics, getting signal from each of them. From the performer side, I can adjust each fader to adjust the mix in my headphones. However , once we track, it seems all we get is a sub mix. Is there a way to actually record individually channelized and isolated drum mics? I figure if anyone can answer this question it's YOU!!! Once again man, thanks for being a great resource and a champion for educating musicians and recording enthusiasts! Bravo!

    • @mixdownonline
      @mixdownonline  4 роки тому

      Unfortunately, you can't. Those will be on separated tracks once you import the HD Files. Multitrack recording is possible with VST Connect but not very user friendly, something they will need to work on imo.

  • @marcelcouture5373
    @marcelcouture5373 3 роки тому

    I will definitely try it with my brother in Florida as a performer. If he can use it, then anybody can do it!!! Thanks so much.

  • @markleyland2661
    @markleyland2661 3 роки тому

    Great video Chris, as always. I've always wonder what it did and how it worked in action.

  • @terrymacklin5935
    @terrymacklin5935 3 роки тому

    Thanks Chris, you have opened another Door for me within Cubase.
    I suspect that some Pro users might not be aware of what is available here.

  • @pauetetee
    @pauetetee 2 місяці тому

    Thanks !!

  • @Mmoody2112
    @Mmoody2112 4 роки тому

    I watched the video and read the comments (so I didn't hit you with a redundant question). . . First off - Thank you for all you do - your channel is such a help (even if I understand something you cover - I end up with something for watching your videos).
    What is the max on the quality side (I noticed you guys did 48k) - and I'm assuming it's limited to the performers interface as well?

  • @KreativeKendreneOfficial876
    @KreativeKendreneOfficial876 Місяць тому

    Great Video Thank You All

  • @chrisharrison809
    @chrisharrison809 3 роки тому

    WOWOWOWOWOW

  • @realraven2000
    @realraven2000 4 роки тому

    Looks great, I always wanted to try and use it. I guess all VST instruments + FX are only local on the sode of the performer? when recording the MIDI are any controller changes / parameter changes recorded on the studio side?

  • @hansdorenstouter3813
    @hansdorenstouter3813 Рік тому +1

    Chris, when you run out of inspiration, haha, would you mind making an update video about VST Connect? I guess it is such a powerful tool but i hear a lot of frustrated people regarding performance and setting it up. Maybe Steinberg improved a lot in the newer versions and it's 3 years later, so... Thanks in advance!

  • @elruso7524
    @elruso7524 4 роки тому +1

    Hi Chris! Great video! Only one person at a time? Greetings from Argentina

    • @mixdownonline
      @mixdownonline  4 роки тому +2

      Not necessary, you can record more than one instrument/person at a time with the Pro version but they will have to share the same mix though

  • @TylerChristiaens
    @TylerChristiaens 4 роки тому

    Thanks a lot for the help. This helped me actually get it going!! I have added my vst3's but it wont let me change the path. I only have access to some vsts. Know a way to set new directory? I only see it for VST2. Thanks again!!!

  • @nathanbrownbass8484
    @nathanbrownbass8484 4 роки тому

    Thank you so much. I've been struggling with the manual for a while now. Your video really clears things up for me. Question, is it possible for me to record 2 performers at the same time, for example bass in my studio and drums as remote performer?

    • @mixdownonline
      @mixdownonline  4 роки тому +1

      Never tried it, but I assume you can. You might have some latency issues as far as playback goes. Not 100% sure how that is gonna go, worth a try

  • @samson418
    @samson418 3 роки тому

    Nice demo. A pity, that Steinberg doesnˋt do such useful videos. They only rely on third parties for „masterclasses“. So your video is a realy helpful one. Now Version 5 was launched. So we can do dubbing on movies and scoring on movies.

  • @SteveMonti
    @SteveMonti 3 роки тому +1

    Hey man great tutorial thank you, I must've watched 10 times and counting :) I have just bought the Connect Pro version in conjunction with Cubase 11 so I can record my mates vocals/guitars (not at the same time) during these lockdown times but I have had a few teething problems :) At around 21:00 you explain how to use third party plugins, I cannot see this window in VST Connect Pro 5.0.20. I'm trying to record his guitars and use one of my fab UAD plugins for his guitar sounds - is this possible? and would using a plugin my end cause problems ie latency ? thanks man

  • @korkenknopfus
    @korkenknopfus 4 роки тому

    This VST Connect lays always as a forbidden territory in my menu 😸. I have never entered there. Thank you for showing us how it works and additionally with real examples!
    I didn’t understand good the thing with the sound quality: with pro you get a low quality audio file and later you can download a higher quality one (24 bit, if you set it). But with the no pro version: do you get from the beginning only the 16 bit version?

  • @rodhermanson8502
    @rodhermanson8502 2 роки тому

    Hey Chris, awesome job on vst connect.
    Is it possible to record more then one session player at the same time? If so what is the limit if any?
    I'm looking at bass, drums and guitar at the same time.

  • @bobdarwin
    @bobdarwin 3 роки тому

    Very cool explanation video! Only thing I didn't understand: when you recorded the accoustic guitar of your other friend, you didn't record it on a VST Performer Track? How is this possible? Or can I take every Audio Track and have only to adjust the input of it to "Performer"?

  • @epicvidz7316
    @epicvidz7316 3 роки тому

    Hey there, many thanks for this massively informative video!! I hope you don't mind me asking, I just got the Pro version 5.0.20.585 and at the settings , I can see the 'Set to HD' option also no 'Encryption' option. Have these become mandatory now and taken off?? Thanks so much!!

  • @petemarceau2386
    @petemarceau2386 4 роки тому

    Very helpful as I’m looking to attempt to do some long distance collaboration. A concern I do have is distance. Does all this work if the performer is say 600 miles away?

  • @nicksaya
    @nicksaya 4 роки тому

    great video thanks!! can the destination folder for hd files on the performer side be changed to different than docs folder?

  • @ramonloro3786
    @ramonloro3786 3 роки тому

    Really good video ! Seems you must to know the performer in advance and then link but, Is there any possibility on the vst connector to chat with unknow performers? Thanks chris.

    • @mixdownonline
      @mixdownonline  3 роки тому

      No, this tool is designed for online collaboration with a performer you know.

  • @alexandertalashov8204
    @alexandertalashov8204 4 роки тому

    One second delay in the config and you actually tested the same network environment (the local one) and, yeah, for sure it will "work smoothly", there is no wonder it will

  • @johninflamez
    @johninflamez 4 роки тому

    Thank you so much for your videos Chris!! Loved the collab.
    Could you please tell me if I can use VSTConnect SE if I have a Steinberg UR242 audio interface?? Also I'll be the host and would be recording a friend who doesn't have an audio interface at her end. Could she use a regular headset (with Mic) to record using VST Performer on her end??
    Please advise.

  • @filipjonathan
    @filipjonathan Рік тому +1

    It's such a shame that the SE version doesn't support hi res audio. They could've given us one hi res mono signal, it would've been much more useful.

  • @neillough3844
    @neillough3844 4 роки тому

    Thanks for doing this video. How does the recording routing work if I record more than two mono tracks simultaneously. Are they still under the stereo track?

  • @chrissmets1962
    @chrissmets1962 3 роки тому

    Hi chris
    what a beautiful explanatory video, don't need the manual anymore!
    got a question though
    when recording with my friend he can hear and play in sync, but the recording itself is not in sync
    I can easily slide the recording in the right position, but I don't see you do that.
    I can see that you are playing your recorded music in mix mode while the control room is in cue
    we also tried that but it always ends up in a recording with a "delay"
    could you give us your solution?
    many thanks
    keep up those marvelous video's !!!

  • @billirwin1726
    @billirwin1726 2 роки тому

    Hey Chris, I'm only asking this because I'm slow 😐
    So would others need to have Cubase pro to use this or could it be any other vst software...?
    Thanks...
    Keep up the good work 👍

  • @sasquatchtotem
    @sasquatchtotem 4 роки тому

    Hello, great video! Thanks! How is the video quality, and can you route this to OBS? Or to a stream in general?

    • @mixdownonline
      @mixdownonline  4 роки тому

      I would definitely not use this for a streaming performance on OBS. VST Connect is a remote recording solution more than anything else.

  • @gotyor
    @gotyor 4 роки тому

    Great video, only I noticed i did not see you do any punch ins and outs, is there to much latency to try to pull that off. or can it be done?

  • @georgejacob3234
    @georgejacob3234 4 роки тому

    Hi Chris great video as always. Very helpful.are just help out with a issue regarding midi please. I have a friend in Sweden we currently working with on project.i have have the vst instruments on my side i just want him to play on his end and capture on my side.we trying some stuff but we getting a very bad latency any help would be great.
    Once again amazing video.big thumbs up👍

    • @mixdownonline
      @mixdownonline  4 роки тому

      Doing it this way will add a lot of latency for sure. If you have the VSTi on your side, just record your friend's MIDI and assign it to your VSTi afterward. In this case, your friend can use any VSTi of his for monitoring only.

  • @1hotday1
    @1hotday1 4 роки тому

    Chris, thankyou! I didn't realize that Get HD files was there. We made a track using just the low quality files it sent back. I have a question about cues. Should I be sending the performer the already recorded tracks using cues as the sending method? I have to say, I think this vst connect is amazing. Thanks again!

    • @mixdownonline
      @mixdownonline  4 роки тому +1

      The only CueMix you send to the Performer is the Performer Cue created by VST Connect :-)