Super sis.. I tried today my first firing using mud pot... middle la matum black ayuruku, side la lam color changed but black agala... saw dust use pani stove la try paninen, fired for 4 hrs
Hi sister.. nicely explained... Usually once the jewelleries are made after how many days we should bake it..?? Also while baking it should be wet or completely dried
If you keep in sunlight it should dry for 2 to 3 days orelse in room temperature means 4 to 5 days. Need to be dried completely before baking. Thank you
No air dry clay ah bake pana kudathu, direct ah paint panidalam complete ah dry ana appram, long distance la irundhu kila podama use pana kandipa break agathu.
Madam as it turned into black colour already..still do we need to apply black colour first and afterwards use other colours..or directly can we use other colours..please reply
Hi if you are going to apply golden or silver color fully like oxidized jewellery then apply black as base coat. If you are going to use any other color then directly apply any color without applying black as base color.
@@padminisrivathsa yes u can bake by sunday. Alwasy keep under room temperature itself for drying dont keep under direct sunlight. Piece should dry evenly.
Thanks sister, yesterday all my doll broke while firing. I did direct firing elame break ayiduch. Only Vinayagar half broke face matum nala irk. I'll follow this and update you
@@rslakshmicreation This is my first time trying Terracotta clay. UA-cam parthu learning. Elame personal use thaan sis. Yes even I'm thinking to join them with glue or mseal. Inum half clay irk, I'll mould to new shape and fire in your method
If it is natural terracota clay you should bake orelse while painting or while in contact with sweat while wearing again it will become clay orelse break. Better you can try air dry terracotta clay so you dont need to bake. You can dry for 2 to 3 days and paint then wear.
How long it will take to bake pendants completely??? Do they break after baking ??? How take out all the small beads from it any ideas please suggest😊😊
Baking need 2 to 3 hours. Once flame is turned off it will transfer heat from upper part to lower part of pot and all saw dust will turn black. After 3 hours let it leave for 2 hour Dont touch directly with hand.once it cool down use any teaser , metal tea filter or filter bowl to filter coal dust and small beads separately. If it baked fully you can put in water and clean dust it will not break. But if it is not bake properly it will break easily if you put in water or while taking from pot.
@@rslakshmicreation Sister, I am a beginner in this .Once I bake my pieces using coconut shell, but all my pieces broke. I don't know why . Is there any importance in the quality of clay. Do you know which clay is good (brand). I purchased from amazon. There are low fire clay with grog free , natural clay, air dry clay .... which one is good
@@danielraviprabhath5142 yeah hi mostly it will happen to everyone in beginning. No quality and all in clay. Clay itself natural only. While you completing your project it should not have any bubble or crack. So use water and smooth to avaoid crack. Once you make any jhumka , stud or pendant let it dry for minimum 4 days in room temperature. Dont keep in direct sunlight instead keep in outer space where it will dry naturally. As a beginner dont use this technique to bake your jewellery. If you have pot then put some saw dust of 2 layer first and place your terracotta jewellery to bake and close again with saw dust. And keep in stove for 45 mins to 1 and half hour in medium flame. Then after 2 hours you can take out and paint. SOON i will post videos for beginners to bake with easy method without any breakage.
Super sis.. I tried today my first firing using mud pot... middle la matum black ayuruku, side la lam color changed but black agala... saw dust use pani stove la try paninen, fired for 4 hrs
Thank you sis. Yeah exactly we need to keep incase few not baked fully.
amazing content
want to be friend?
Nice but it would help lot many if you could communicate in Hindi or English
Hii can you please add English subtitles? Im unable to understand the video.
Sure will add
What is the price of the set
@@gouria3339 it's for tutorial purpose not for sale
Nice sister
Thank you sis
Welcome 😊 Sister
Hi sister.. nicely explained... Usually once the jewelleries are made after how many days we should bake it..?? Also while baking it should be wet or completely dried
If you keep in sunlight it should dry for 2 to 3 days orelse in room temperature means 4 to 5 days. Need to be dried completely before baking. Thank you
@@rslakshmicreation Thank you so much for immediate assistance..
Direct sunlight or room temperature ? Which method is good for drying ?
Room temperature is good to dry clay. Over heat of direct sunlight may tend to cracks in clay.
Hi sis air dry clay bake pannama use pannuna break aagathaaa???
No air dry clay ah bake pana kudathu, direct ah paint panidalam complete ah dry ana appram, long distance la irundhu kila podama use pana kandipa break agathu.
Madam as it turned into black colour already..still do we need to apply black colour first and afterwards use other colours..or directly can we use other colours..please reply
Hi if you are going to apply golden or silver color fully like oxidized jewellery then apply black as base coat. If you are going to use any other color then directly apply any color without applying black as base color.
@@rslakshmicreation Thank you so much..just tried 2 items on Tuesday kept to dry..can i bake it on Sunday or do i need to wait for a week..
@@padminisrivathsa yes u can bake by sunday. Alwasy keep under room temperature itself for drying dont keep under direct sunlight. Piece should dry evenly.
@@rslakshmicreation yes mam..will try..keep supporting us 🙏🏻 thnx again
@@padminisrivathsa sure. Always my support will be there
We can use sand for burning ah
Yes you can use sand or saw dust and keep in stove for 45 mins to 1.15 hours. It will bake completely.
Thanks sister, yesterday all my doll broke while firing. I did direct firing elame break ayiduch. Only Vinayagar half broke face matum nala irk. I'll follow this and update you
hi if it broken dont throw away .use some strong glue and join it. And you can use for personal use
@@rslakshmicreation This is my first time trying Terracotta clay. UA-cam parthu learning. Elame personal use thaan sis. Yes even I'm thinking to join them with glue or mseal. Inum half clay irk, I'll mould to new shape and fire in your method
Love to see your work. Happy crafting.
Can coco peat be used instead of saw dust?
If coco peat available in nearby area or in your house you can use. But Dont buy online. Instead you can use coco husk, fiber or husk pieces.
Can you please tell in English
I have added subtitles please check. Will explain in English upload soon
I don't have any facilities for burning..i can keep dry for 3-4 days in room tem ah akka
If it is natural terracota clay you should bake orelse while painting or while in contact with sweat while wearing again it will become clay orelse break. Better you can try air dry terracotta clay so you dont need to bake. You can dry for 2 to 3 days and paint then wear.
Hey hi checkout my latest video. Uploaded how to bake jewellery without firing.
How long it will take to bake pendants completely??? Do they break after baking ??? How take out all the small beads from it any ideas please suggest😊😊
Baking need 2 to 3 hours. Once flame is turned off it will transfer heat from upper part to lower part of pot and all saw dust will turn black. After 3 hours let it leave for 2 hour Dont touch directly with hand.once it cool down use any teaser , metal tea filter or filter bowl to filter coal dust and small beads separately. If it baked fully you can put in water and clean dust it will not break. But if it is not bake properly it will break easily if you put in water or while taking from pot.
@@rslakshmicreation thank you so much .. I am a beginner and much interested of doing all these process...
@@santhikrishna3565 your are welcome. Love to see your works.
@@rslakshmicreation Sister, I am a beginner in this .Once I bake my pieces using coconut shell, but all my pieces broke. I don't know why . Is there any importance in the quality of clay. Do you know which clay is good (brand). I purchased from amazon. There are low fire clay with grog free , natural clay, air dry clay .... which one is good
@@danielraviprabhath5142 yeah hi mostly it will happen to everyone in beginning. No quality and all in clay. Clay itself natural only. While you completing your project it should not have any bubble or crack. So use water and smooth to avaoid crack. Once you make any jhumka , stud or pendant let it dry for minimum 4 days in room temperature. Dont keep in direct sunlight instead keep in outer space where it will dry naturally. As a beginner dont use this technique to bake your jewellery. If you have pot then put some saw dust of 2 layer first and place your terracotta jewellery to bake and close again with saw dust. And keep in stove for 45 mins to 1 and half hour in medium flame. Then after 2 hours you can take out and paint.
SOON i will post videos for beginners to bake with easy method without any breakage.