This is to all the haters who commented about this car, it runs 4.xx in the 1/8th mile, 1.0x in the 60' and will drag the bumper if we don't tie the front down, try us with that bracket car if you want
You think this is a bracket car? Lmfao! Heads up outlaw car, the # on the side is the class # not a dial in. To put it in perspective it runs more mph in the 1/8th than yours in the 1/4
It sounds ok and a very nice car fer shur. I been racing for 35 yrs. No way this small block is making 1500 or even 1k. I'd say it'll run 11's maybe high 10 in the 1/4 at best. Never ran the 1/8 in my life really.
No lie i just told the guy its impossible. My 632 with 13.1 and 800lift roller and 400hp of nos makes 1441. I think he had a duel plane intake on it. So he is making 1500hp at 6500 rpms i guess. No way
@@KingJT80 a nova with a small block with a plate system . How can it possibly make 1500 hp . I have a 632 that make 1001hp and spray it with 400hp. It made 1417hp. How can that small block make that.
@@robertwetherington3372 a small block depending.on how big it is can make 800-900+ A plate can go to 400+ so maybe around 1200-1350. But being a x275 car they have to run in the mid 4s to even be considered competitive.
Does sound like a sexy cam, get that idle sorted, nothing more annoying than an idling engine just looking for a reason to die, them lifters need that rpm for oil, and them rings need to dry out
Everyone of you clearly doesn't know of nelsonracingengines! All that motor needs is change of fuel to make 1500 hp! It's not hard to do so. Methanol or nitro methane will get that number easy. It's either a 434 sbc or a 441 sbc. A bone stock ls truck motor on nitro can make over 400 alone.
My altered dragster makes around 550 Sbc 355 flat top forged pistons i beam rods with a steel crank with aluminum heads that flow 225 with 2.08 intake valves 1.60 exhaust witha 640 lift 106 ls tunnel ram with 2 750 double pumpers
There's no way that little radiator cools that motor I have a dural 4000 cf. M. Electric fan unit and a double pass radiator and I still can't cool my motor down
I don’t see that car weighing less than 2800Lbs. With a 13/15 degree abc you might make close to 800 with a 500hit equal’s 1300ish at best. That will get your 4.99. That’s pushing it though
A little background info tends to make a video a little more interesting, cubic inch, compression, base hp, approx cam size, stall, yep all or some of those points tends to make a video better, looks and sounds great ..................buuuuuut.
Title was probably meant to read 500+ HP with a 100shot
This is to all the haters who commented about this car, it runs 4.xx in the 1/8th mile, 1.0x in the 60' and will drag the bumper if we don't tie the front down, try us with that bracket car if you want
You think this is a bracket car? Lmfao! Heads up outlaw car, the # on the side is the class # not a dial in. To put it in perspective it runs more mph in the 1/8th than yours in the 1/4
1500hp 😂😂😂
Imagine knowing this little but still commenting
@@antisocialracing100 lol I'd love to get beside it.
sounds like pure " MUSIC " to me, love your setup .
If that nova makes 1500 horse, then my name is Elvis Presley😂
on the nitrous..yes....
@@KingJT80No way possible.
@@wilsonjohn9766 okay probably closer to 1300 probably 900 on motor and another 400-500 on the gas
@@KingJT80 That engine is nowhere 900 horsepower naturally aspirated or on the bottle.
Your names not Elvis.
That's one good sounding Nova...well done!!!
sounds healthy, would love to see it in action
I like the car! I think the Dyno must have been broke though!
I will always love Nova's ❤️
Nice little hot rod. Good luck with it boys.
Sounds wicked!!
CLEAN MANN
It sounds ok and a very nice car fer shur. I been racing for 35 yrs. No way this small block is making 1500 or even 1k. I'd say it'll run 11's maybe high 10 in the 1/4 at best. Never ran the 1/8 in my life really.
Lots of comments on this car. I think we all deserve to see a video of it getting down or another video about the car period.
No way a single 4150 and that plate system can make 1500hp. Mathmatics will tell u that.
Your not getting 1500 hp out of that plate kit. Lol
4.xx in the 1/8 id say youre probably really wrong LOL
Click bait.
@KingJT80 ABSOLUTELY, right , There's no way.
It looks like you'd need at least a 1,000 HP shot of nitrous to get to 1500 HP.
500
+
1500 hp out of a 4150 carb i don't think they can move 1500 hp worth of air unless forced thru the venturi
No lie i just told the guy its impossible. My 632 with 13.1 and 800lift roller and 400hp of nos makes 1441. I think he had a duel plane intake on it. So he is making 1500hp at 6500 rpms i guess. No way
Saw the single plane but 1500 is not happening
Even a 1000hp barefoot for a sbc is crazy and maybe spray 500 but not no 1500 with what God gave it!
Just saw a 900hp all motor small block it had 2 dominators
He claimed mid 4sec eighth. Only if john force ran in the back of him
I see an NA small block. No way it’s making 1500 horsepower even on spray. My guess is 480-500 crank
440 small block can make 850-900 and those look like 18 degree heads. that intake def isnt a 23 degree angle
480-500? Wtf are you on 😂
$1500+ for the gas system sound's about it 😜
Nice hot rod 🖒
Sounds like a high compression Solid roller with big block ci. Im betting it hits HARD! Sounds great
It’s a sharp hot rod and sounds tough so Thers that but you know as well as I do that small block with that plate is not making 1500
Maybe 600 HP 6.70 in the 1/8
I'd like to know what kind of heads and cam u got in that fn monster
Wouldn't we all, a 4150 carbed sbc making 1500+ on a plate is worth discussing. I think another video would be cool too.
There is no way 1500hp comes from that .
mid 4 second car. do you know what it is youre looking at?
@@KingJT80 a nova with a small block with a plate system . How can it possibly make 1500 hp . I have a 632 that make 1001hp and spray it with 400hp. It made 1417hp. How can that small block make that.
@@robertwetherington3372 a small block depending.on how big it is can make 800-900+ A plate can go to 400+ so maybe around 1200-1350.
But being a x275 car they have to run in the mid 4s to even be considered competitive.
Mid 4s lmao 😂😂
1500hp? No way
Not with that 4150 carb.
@@TKOUTLAW1 how would it run 4.xx then?? they make twin blade 1100-1200 cfm custom 4150s
Does sound like a sexy cam, get that idle sorted, nothing more annoying than an idling engine just looking for a reason to die, them lifters need that rpm for oil, and them rings need to dry out
Man shut us up by putting it on the Dino where we can see it. I know the difference between 400 & 1500 hp. And that is 4 to 500 if that.
1500hp would be like 750ftlbs tq @ 10,000rpm....what size crank you swinging in there? You might have 800hp on the bottle.
Maybe 600ish on motor 🤔
more than that most liekly. probaly closer to 900 or so. it could be a 440+
I've built plenty of 1500hp cars and this isn't it. Maybe a 1000 on it's best day on juice.
1,500 lmfao must be some good shit.
@@joshuagarvey9362 Yep I said the same thing to myself.
Sb2 sbc nascar engines make over 800hp on motor!. That car is making 1500 hp with nitrous easily
Everyone of you clearly doesn't know of nelsonracingengines! All that motor needs is change of fuel to make 1500 hp! It's not hard to do so. Methanol or nitro methane will get that number easy. It's either a 434 sbc or a 441 sbc. A bone stock ls truck motor on nitro can make over 400 alone.
My altered dragster makes around 550
Sbc 355 flat top forged pistons i beam rods with a steel crank with aluminum heads that flow 225 with 2.08 intake valves 1.60 exhaust witha 640 lift 106 ls tunnel ram with 2 750 double pumpers
1500hp??
With a single plate kit I doubt it
Not a chance
It’s a 1000 hp shot !!!
@@TEAutobody 975+ from a 450+ small block with a 450 Plate yeah it can be done
15,000 👍
How many cubic inches?
probably over 450
@@KingJT80one helluva 23 degree head to feed a 450 cui sbc and make 1500 on the gas. But it's possible nowadays.
@@justinseeger1255 i dont think those are 23 degree. they look like 18 or something of that nature although few dudes run a 23 degree that fast
@@KingJT80 I spose that would make sense.
That Bill Mitchell intake is 23 degrees @@KingJT80
There's no way that little radiator cools that motor I have a dural 4000 cf. M. Electric fan unit and a double pass radiator and I still can't cool my motor down
I don’t see that car weighing less than 2800Lbs. With a 13/15 degree abc you might make close to 800 with a 500hit equal’s 1300ish at best. That will get your 4.99. That’s pushing it though
sounds like a stroked n loped mouse! musical! but 1500hp?? you must be spraying the shit outta that cheater plate
500 shot probably and thats probably just more than youre typical 434
it looks like an 18 degree headed or less 450 small block
No info
If its a 434 800-850na with a 600-650 shot of nos will givebit 1500 over, sbcs are wild nitrous monsters
Where's the 1500hp? Nothing in this video is anywhere near 1500. Maybe 6 or 700 out of the motor if it's got 50 grand in it
He said it runs 4.50s in the eighth. John Force must have run in the back of him and pushed it thru the traps
No way 1500hp on a plate system.
975 plus 400-500 it probably could
A little background info tends to make a video a little more interesting, cubic inch, compression, base hp, approx cam size, stall, yep all or some of those points tends to make a video better, looks and sounds great ..................buuuuuut.
5.30s and I'm being liberal at best.
And how big of a jet is he running then? how big is that small block?
you dont know either so why would you guess
@KingJT80 If you around racing enough you can absolutely know what a motor will run. Like I said 5.30s and I'm being liberal.
Im sure the Horsepower is Underrated
aint no 1500 hp, just saying