Amazing Dovetail Half-Lap Joint | Woodworking | ASMR
Вставка
- Опубліковано 12 вер 2022
- How to make a half lap dovetail joint. A very strong joint that looks great too.
🔸 See my 5 favorite woodworking joints in this video: • Five Woodworking Joint...
#shorts #woodworking #asmr - Навчання та стиль
Check out my new wooden Bluetooth speaker video here: ua-cam.com/video/v4rr_cKRl-c/v-deo.html
Super clean and tight! That's a professional doing it right.
Thanks, have to be patient with hand cut joints like this but worth it for the results!
@@kiwiworkshop
nope... its terrible!
I love the relief chiseled in to the back side of the dovetail. Great idea.
Can't claim it as my own, but do agree that it's a great idea. Thanks
@@kiwiworkshop Is that to add some surface area for the adhesive?
@@MasterArkannor that would be doing the opposite and taking away surface area. That relief prevents any material from pushing the joint out beyond flush. Basically just means the tail will sit flat 1st try.
@@michealkilcoyne8219
,,,,,,??
?,?
@@kiwiworkshop 🍋p ok l
Nothing like a good, sharp tool. I can literally shave with mine, and I retired 15 years ago!
I totally agree!
можно вечно смотреть на эти замки 👍👏👏👏
One of the best I have 👀 yet
The wood surgeon returns! I love your work. Perfection
"The Wood surgeon" - I love it! That would have been a great name for my channel. Just checked and someone else has it.
Neat presentation, I'll give you that.
Pure artisan woodworkery….
Skills for work with a good guy
I do this with just my miter saw, I always plan to do more by hand but time always get me.
I'm the same, I like to use hand tools but time pressure often results in using power tools. Thanks.
I like your work❤️
First time viewer, didn’t even make it halfway through before I subscribed. Looking forward to more bomb ass shit like this.
Awesome, pleased to hear it
Beautiful work! I guess you need a lot of practice to achieve this.
Thanks! It's only really been the last couple of years I've been into hand tool woodworking, but had plenty of practice in that time.
Done this my first year off college😅 This is basic (entry level) for Joinery.
Half laps are quite simple
For any beginners watching this, there are many simpler joints to start with. Here is a list of common joints ordered from easy to hard: Butt, Mitre, Pocket, Dowel, Dado (groove), Rabbet, Tongue and groove, Mortise and tenon, Lap, Bridle, Wedged mortise and tenon (through tenon), Dovetail lap (the one in this video), Dovetail. Beyond that, you can venture into Japanese joinery with some very tricky joints!
@@kiwiworkshop True mate your work is brilliant and I enjoy watching them all 👊🏻
Nice, sharp chisels bud!
👍
The only way to possess them
ฝีมือล้วนๆครับ
Schwalbenschwanzverzinkung beste
Saya suka cara sambung kayu ini❤❤❤
Very nice 👌🏼
Класс
Excelent Work
Thank you
Wow impressive. I will subscribe just to learn hand tools abilities. Thank you
Thank you. I make a mix of hand tool and power tool videos. More hand tool videos will certainly come.
НОРМАЛЕК !!!👍👍👍👍👍👍👍👍🇧🇾🇧🇾🇧🇾
👍
Such nice woodcraft…..
Thank you! Glad you like it
When I was learning carpentry, we were taught that a saw cut must be exact, NO chiseling!
If the saw cut marks were missing so would marks for your work be missing!
Chiseling takes extra time, and time is money, do not waste money!
.
.
What kind of wood is the first one? Thanks for sharing.
What does the roller thingy do?
Goog job
Increíble
What finish, boiled linseed oil?
Actually Tung oil with citrus thinner, but yes, does look a bit like boiled linseed oil
СТОЛЯР👌
Just bought me a marking gauge bro.. It has the micro adjuster on it too. I love this tool but it also has this otehr attachment which I haven't gotta name for.. The marking Gauge is sweet though and I'm looking forward tomarking my work now.. I still need to get one of those knives u have there. Are u using Narex chisels? I bought a cheap set to start with. They're those Magnusson chisel set. They're ok but I think they may last a little while until I get a better set.. Great work there mate..
Awesome. Yes, the micro adjuster is nice to have. My chisels are Stanley, they get the job done but I hope to upgrade to higher quality chisels this year. The next tool I'm going to buy is a router plane. There have been a few occasions over the past year where I've needed one and had to find another way to get the job done.
رائع
Purdy!
🔥🔥🔥👍💣
Hi which oil is it . Look very clear
It's Tung oil with citrus thinner
Why didn't you sand finish?
I think that the word "amazing" is a bit much but a very nice job. I appreciate the use of hand tools instead of very expensive equipment.
Much easier using a radial arm saw .....
Yes correct, it would be easier using a radial arm saw
Which oil do you use ? It looks amazing
It's Tung oil with citrus thinner. Thanks
@@kiwiworkshop thanks will look to buy it, can we used it to rejuvenate/reshine older wood tables etc?
What tools are you using to make your perfect lines?
Hi, the two main tools are marking knife and circle marking gauge.
The others: machinists square (guessing), sliding T-bevel (gauge), mechanical pencil, SHARP AF chisel, dozuki saw (i believe)
What type of wood do you use?
White pine and Silver beech thermally modified (steam treated) to create the dark colour
I cant get over the fact that he just doesnt draw a simple X over something that needs to be cut/removed
If I'm not making a video that's exactly what I do, or not mark it at all. The shading is purely for the benefit of the video, to make it obvious which area is to be removed. I've seen other woodworking UA-camrs do the same. An X or fine pencil lines often don't show up that well on video.
Name of the round gold scoring tool called?
It's called a marking gauge. The one I used in this video is made by Veritas.
How long does this take in real time?
Ignoring the glue drying time, probably about 30-40 minutes if I'm being careful
supar
how do you cut so straight by hand.
I find it works well to mark a line on two faces and keep watching the saw blade against each line
what pencil are you using
It's a Pentel Mechanical Pencil A315, 0.5mm
Don’t cheap out on your precision squares, everyone. It’s worth it to splurge and get the Starrett or Matsui.
I prefer machinist squares. Incredibly accurate and cheaper than woodworking brands.
How many times have you chiseled out the wrong area? Just wondering why you find a need to mark the area being chiseled.
In this case, it was mainly for the benefit of the video, since the marking knife lines can be hard to see. Otherwise it's on a case-by-case basis for each project. Sometimes if you have matching profiles, you would mark out the ones to remove to avoid the potential for error.
What is the darker wood called?
It's thermally modified beech (stream treated) to bring out the dark colour
What's the tool called to mark the lines
Wheel marking gauge
What's the name of that tool used for lining?
It's a wheel marking gauge
@@kiwiworkshop thank you for your response.
Is that linseed oil
Tung oil
how about this motion videos? can u tell me this?
No advanced machines no technology... just the hand 👋✊️👏
Nothing beats handcrafted woodwork 🙂
Pencil is going to need sharpening often
😄
Böyle birleştirdin nolfu şimdi faydalı iş yap
Чем покрываеш дерево-напиши пожалуйста.
Did you did t lap
Как называется эта штука для разметки?
Wheel marking guage
رائع يا عزيزي تحياتي من مصر
Интересно почему краска не сгорает
Đục mua ở đâu
Not for sale sorry 🙂
角飛ばさなくても良くない？
Ха. Ой как удивил прям... ласточкин хвост для себя открыл? )))))))
I'm not claiming to have discovered the dovetail 😄
apa nama kayunya?
White pine (Kahikatea) and Beech (thermally modified to create the dark colour)
Что за масло, кто знает?!🙏
Tung oil
Balsa wood. 😂
Nope, New Zealand Kahikatea (white pine)
Your sawing upsets me
Time and practice
Hindustan ka kabi koi color raha hi nahi
Grean orange sb badme banaliye
Wg ich weiß noch gar nicht so gut ist doch nicht so viel Zeit und ich bin sehr zufrieden und ich bin mir aber auch nicht so
А о чём ролик то ???
It says in the title
If you're confident in your cuts, you don't need glue.
Often I don't use glue. All depends on the application and how forces will be applied to the joint.
I think cutting these many trees for these many videos is not good to cut trees like this plz be careful we have one planet
Remember that trees are a renewable resource. I choose timber from suppliers that replant the trees. Also use reclaimed timber quite often.
you know they make electric tools rights
I also make videos with electric tools. On those videos, I get comments like "it's not proper carpentry unless you use hand tools" and "you are cheating by using electric tools". So I like to make videos showing how to make joints with both hand tools and machines.
Из какого дерева сделаны эти доски🤨🤨
New Zealand Kahikatea (white pine) and thermally modified Beech (dark wood).
Eso es ya mas viejo que el hilo negro,,menudo "invento",,