Thank you so much Frank!! You have no idea how much you've saved me! The internet said it wasn't possible, that I've got the wrong controller, FRANK SAYS OTHERWISE!!
Oh my God, you know you are the only one in internet who have this info?? Why it took me this long to find your video, I almost buy a nother type of controller. Please make more videos
Hello, not related but the right stick on the controller is mixing the stick and bucket together. I have to move the stick completely and up and left or right to move the bucket and all the way down ,left and right for the stick. When I move the stick the bucket curls with it on its own. I’m thinking stick adjustments? I don’t know. I’ve been trying for over a week. The boom is fine. Hope im explaining it correctly. No function up and down, left and right. Only at an angle.I’m new to the hobby if any advice I appreciate it. Thanks
I did the Wuehlbox APK 40 conversion for my Volvo e160. I mixed up a hose at the end of the hydraulic pipes ,3 day of headache. I thought my control was broken 😅.Thanks for responding. Have a great day
Hello, it’s me again. So all of a sudden when I swing left, I have to move the gimbal twice , swing right it works fine. When I reverse the channel it does the same thing but in opposite direction. Any advice? Thanks
welcom mr frank how you doing bro .. i see its wonderful information and excellent explain thx dude👍 so i have question first i do mix on my 870k pump on demand and i opened the pressure in my 870k But if i want see her full power Do you want me open the pressure full limit or half and what is the best pump ratio 30% or 40% or 50% i hope you answer me nice video i will send this video to my friends until they see it have a good day 😄
in the beginning of the video I have a couple pics that show what you need to do the pump is channel 5 (slave) and the master channel is the valve you want to open they will be channels 1-4 your throttle will be on one of those channels so you mix the other 3 as long as you don’t have the old one mix radio the newer radios have 4 mixes older radios only 1 ua-cam.com/video/SieOvaah_PA/v-deo.html
@@Trucker1970 yeah! Updated my firmware and I have all the options now =D But! There is a problem: I managed to make my tracked crane pivot steer and go forward (I'm using ch1 for left/righ and ch2 for forward/reverse using the right gimball) but when I set the gimball for going backward it keeps pivot steer left... WTF!? Edit: maybe I should try to physically reverse polarity on one of the motors.
Thank you so much Frank!! You have no idea how much you've saved me! The internet said it wasn't possible, that I've got the wrong controller, FRANK SAYS OTHERWISE!!
haha! 😂 you’re welcome and thanks for the feedback glad I could help
Thank you very much for your excellent info. Have been trying to figure this out since I bought the dozer, this is great.
Oh my God, you know you are the only one in internet who have this info?? Why it took me this long to find your video, I almost buy a nother type of controller. Please make more videos
Thank you very much your the one and only post this video on internet again thank you very much❤️
Thanks brother it helped me a lot 🙏 ❤️
Hello, not related but the right stick on the controller is mixing the stick and bucket together. I have to move the stick completely and up and left or right to move the bucket and all the way down ,left and right for the stick. When I move the stick the bucket curls with it on its own. I’m thinking stick adjustments? I don’t know. I’ve been trying for over a week. The boom is fine. Hope im explaining it correctly. No function up and down, left and right. Only at an angle.I’m new to the hobby if any advice I appreciate it. Thanks
Fixed it. Hose in wrong place
@@MYRCHOBBY interesting.. I definitely wouldn’t have started with that 😅 good job how the heck did a hose get swapped?? or is this a kit you built?
I did the Wuehlbox APK 40 conversion for my Volvo e160. I mixed up a hose at the end of the hydraulic pipes ,3 day of headache. I thought my control was broken 😅.Thanks for responding. Have a great day
Hello, it’s me again. So all of a sudden when I swing left, I have to move the gimbal twice , swing right it works fine. When I reverse the channel it does the same thing but in opposite direction. Any advice? Thanks
welcom mr frank how you doing bro .. i see its wonderful information and excellent explain thx dude👍 so i have question first i do mix on my 870k pump on demand and i opened the pressure in my 870k But if i want see her full power Do you want me open the pressure full limit or half and what is the best pump ratio 30% or 40% or 50% i hope you answer me
nice video i will send this video to my friends until they see it
have a good day 😄
in the beginning of the video I have a couple pics that show what you need to do the pump is channel 5 (slave) and the master channel is the valve you want to open they will be channels 1-4 your throttle will be on one of those channels so you mix the other 3 as long as you don’t have the old one mix radio the newer radios have 4 mixes older radios only 1
ua-cam.com/video/SieOvaah_PA/v-deo.html
Why I don't have mix 1 and mix 2? There's no such option on my FSi6S.
some of the older JD versions only have one mix 🥴
@@Trucker1970 will firmware update fix it? My firmware is from 2016
@@Trucker1970 yeah! Updated my firmware and I have all the options now =D
But! There is a problem:
I managed to make my tracked crane pivot steer and go forward (I'm using ch1 for left/righ and ch2 for forward/reverse using the right gimball) but when I set the gimball for going backward it keeps pivot steer left... WTF!? Edit: maybe I should try to physically reverse polarity on one of the motors.
@@TransAmDrifter sorry just seeing this did you get it figured out?
@@Trucker1970 yep. Firmware update solved my problem.
Ser can make delta wing using this transmitter