That's an awesome item to scrap out! Wow nice motor in there! Ive never seen a juicer like that. James i appreciate the shout out, and the prayers. That means a lot to me. I definitely need all i can get. Nervous is an understatement lol. Again another great video. God bless you and thank you for being my friend!!
I recently discovered you and love watching you scrap. You are so informative and a tremendous source to this beginner scrapper. Keep the videos coming in the new year as I go back and watch your other videos. Great job!!!
Wow James, 2024 has been an awesome ride of great scrapping videos. Here's to 2025! I hope you have a very Merry Christmas my friend and may God always bless you abundantly!
Thank you so much brother I appreciate that so much. I’m truly blessed. Merry Christmas and Happy New Year to you and yours. God be with you in all you do!
Looks like a good haul to me! A lot more stuff jam packed in there than I thought, including a new friend! Great video James god bless you happy holidays and happy new year 🎊
For those steel pieces in the cast aluminum motor ends, I've taken to using bolt cutters to chomp at the Al. Less messy than the grinder and quieter too❤
@@bentleyalder5492 it wasn’t in the cast aluminum, it was rusted on the steel shaft of the rotor. Otherwise I would’ve just used a hammer lol I appreciate you watching.
Hey SiA! Sorry i couldn´t watch and comment earlier, i was ill. now im feeling better. Wish you happy holidays, pls go on next year with your videos, i will keep watching them! Have a good time, mate!
Oh no, I’m so sorry you’re feeling ill. Good, glad you’re feeling better my friend. Merry Christmas and Happy New Year! Thank you very much for your support this last year. Take care and see you in 2025!😃
Good luck to Adam with his surgery. You will do just fine so don't stress too much. I had lower back surgery years ago and am so glad I did to relieve that pain. Congratulations to Edwin Good info about seperating stainless and aluminum. Nice haul Merry Christmas and Happy New Year
@GDSavingThePast thank you that means a lot. I hope it am as lucky. I sure would love to be back to normal and scrapping ! God bless and Merry Christmas
Prayers for Scrapping on the fly. That was fun to watch you scrap. God bless you and Merry Christmas! Thank you God for sending your Son, Jesus to save us!
Thank you brother, I know he’ll greatly appreciate that. Thank you, I had a lot of fun scrapping it. Amen, brother, Amen! Merry Christmas to you and yours.
That’s a big ole juicer! There’s a lot of goodies from that thing! Hahah hello! 😂😂😂 I can’t stop laughing!! Little buddy Mike 😂😂 congratulations to the winner! That a big ole motor! I still think that’s cool how you do that with the machete! It was definitely worth scrapping buddy! Another awesome video god bless hope you have a great Christmas and a happy new year buddy!
Sure was, I’ve never seen something like it. 😂😂 Heck yeah my friend, and it was so much fun. God bless you. Merry Christmas to you and your family brother.
That an amazing item they don't make them like that anymore. Good haul of goodies . 👍 A tip if you don't mine . = I use u a thick aluminium plate under the transformers / motor . With the machete. The sharp edge doesn't get damaged when you hit the sold aluminium plate and the edge last longer . Hope this helps pal
Such a pleasure to watch another one of Your videos! Great content, clear and concise information, thank you! Did you ever figure out what the piece of machinery was that was scrapped out? Prayers for the person mentioned in this video! God's Blessings on You and Your Journey along this scrap trail you're following!🎉
Merry Christmas and Happy New Year to you also, May God bless you in 2025. I have been praying for Adam everyday as well as all my brothers and sisters in the scrapping family. See you on the next video
That's a luna moth caterpillar!! She's pretty uncommon - thanks for being good to our creeping, crawling friends ... Big rare moths are all the rage . It's like finding a pile of gold memory or old water fountains or old tanning beds hahaha
That's a really cool find. I've never seen one of those but I would have tore that sucker down. Have a great Christmas, buddy. I'm on rest mode now for a couple of weeks.
Good luck Adam.. Congratulations to number 77.. Another great video James. Also when u sharpen ur machete can u show how u sharpen it. I have one that needs to be sharpened but I dont know how to sharpen it.. Merry Christmas to u and ur family James.. ❤👍🎅🤶
What little green caterpillar you had there was a tomato worm that will be a moth, I do believe. Neet little contraption you torn apart, I would do the same to get the most value out of it rather than spread price!!!
@@joleepack6512 it’s held up really well with snow but I think the most I had on it was about 18 inches of fairly dry snow. I’ve got it bolted down to the floor I built so it’s not been bothered by the wind at all. It’s been through 50 mph winds with gusts up to 60 mph. It’s made by Shelter Logic My only complaint is the sun eats the material and it only lasted one summer but I bought some heavy duty tarps and put over it. No leaks at all. Hope this helps.
Maybe but I don’t think people want to watch wire stripper that long lol. The hatchet is better on transformers, the thickness doesn’t work well with motors in my experience.
Yes, there is a green, "copper underwing" pattakitter. And no,.... you cannot scrap them like you just did to your wife's last juicer. They are genderless so we call them they, and if they wanted to be in the grass, they could have been easily. They chose the enclosure so they can spin without harassment . Then Krampus kicked them out of their home and threw them to the predators on christmas. It's an old story.
Good thing I don’t have a wife 🤣 Nah that little green alien needed to get out of my shop 🤣 Thanks for stopping by my friend, hope you’ve been doing well.
Thank you so much for your support this last year.
Merry Christmas and Happy New Year to all.
God bless you and here’s to a great 2025!
Merry Christmas Everyone and Happy New Year's ❤
Merry Christmas 🎅 🎄
@@ThatsRightRecycling Merry Christmas!!
@@redrum2612 Merry Christmas
Have a wonderful Christmas Brother send Prayers & CheeRs from my junkyard to yours!
Have a great Christmas
Scrap it all
&
Everyone that reads this
Thank you!
Merry Christmas to you!
Thank you for all of your videos and prayers this year. May you have a blessed Christmas and New Year. See you next year!
@@styverdyver you’re very welcome!
Thank you for all of the support.
God bless and Merry Christmas to you and yours!
That's an awesome item to scrap out! Wow nice motor in there! Ive never seen a juicer like that. James i appreciate the shout out, and the prayers. That means a lot to me. I definitely need all i can get. Nervous is an understatement lol. Again another great video. God bless you and thank you for being my friend!!
@@scrappingonthefly77 you’re very welcome brother!
Lots of people are praying for you.
God bless you too!
Yeah that was a pretty cool thing to scrap.
Your video is very informative thanks for showing all your tricks of the trade! Keep on keeping on !
Thank you very much!
I recently discovered you and love watching you scrap. You are so informative and a tremendous source to this beginner scrapper. Keep the videos coming in the new year as I go back and watch your other videos. Great job!!!
@@deelerma569 I really enjoyed reading your comment, thank you so much! 😊
Darn good score on the aluminum. Great scrap out there.
Heck yeah, it was awesome!
Thank you for watching
Merry Christmas, James! It's been so lovely getting to know you and your channel this past year. Have a great one! xxx
Aww thank you so much!
Merry Christmas and Happy New Year to you and all that you love!
It’s been nice getting to know you as well. 😊
I’m shocked there was a video today and pleasantly surprised
@@nicejunk666 thank you my friend!
Have a wonderful Christmas and blessed new year! Take Care.
Thank you brother!
Merry Christmas and Happy New Year to you and yours!
Good luck Adam
@@nicejunk666 here here!
@nicejunk666 thank you man!
That’s some kind of crazy worm
@@nicejunk666 Aliens 🤣
Amen. Merry Christmas to you. That was an awesome tear down. Nice beefy motor.
Yeah it was sweet!
God bless.
Merry Christmas to you and your family brother.
Wishing you and your family a VERY Merry Christmas and a Happy and prosperous New Year, James!!
Thank you so much, Roger.
Merry Christmas and here’s to a wonderful new year
Best of luck Adam
Absolutely! Thank you my friend.
@ThatsRightRecycling thank you Chris
Great video! I enjoy them all
Thank you so much!
That was one nice motor to scrap merry Christmas and happy new year mate catch you in the new year 👍👍👍👍
It was awesome to scrap. Thank you! Merry Christmas and Happy New Year my friend!
Nice variation in metals from that juicer buddy. Real good haul of ally and copper no 2.
Merry Christmas
@@scrapitall200 and to you brother
Thank you! 😊
Wow James, 2024 has been an awesome ride of great scrapping videos. Here's to 2025! I hope you have a very Merry Christmas my friend and may God always bless you abundantly!
Thank you so much brother I appreciate that so much. I’m truly blessed.
Merry Christmas and Happy New Year to you and yours.
God be with you in all you do!
Looks like a good haul to me! A lot more stuff jam packed in there than I thought, including a new friend! Great video James god bless you happy holidays and happy new year 🎊
Yeah that was so awesome to scrap
Merry Christmas and Happy New Year my friend.
God bless.
That is a cool calendar. Got mine a few days ago.
She did a fantastic job making it. Awesome, thank you for purchasing one.
Now this looks interesting!
It was sure was. Thanks, Tony!
Have a good Christmas and New year 🎉
Thank you!
Merry Christmas and Happy New Year
much love yall
Thank you for watching
What a great item to scrap, really high quality! MERRY CHRISTMAS! And God Bless.
@@ToddWoodward-r8h it was awesome to scrap!
Merry Christmas brother.
God bless
Merry Christmas from the UK
@@andrewhorner1078 thank you!
Merry Christmas and Happy New Year!
Awesome video, Scrapitall ♻️🌲
Thank you brother.
Merry Christmas!
Adam is always in my prayers ❤️🙏🏻
Amen brother, that’s wonderful!
@BushDogScrapper thank you brother I appreciate that
Thank you great video .Have a merry Christmas and a happy new year
Thank you my friend.
Merry Christmas and Happy New Year!
Set that little green puppy free Thankyou.We have to look after nature. Best wishes Adam.
Absolutely! 😃
Thank you!
@PhilipRichards-w6u thank you Phillip !!
Have a safe and happy Christmas and new year.... Nice to be a runner up 😊😊🎉🎉
1 in 4 chance, so close!
Merry Christmas and Happy New Year to you and yours.
Merry Christmas 🎄. Happy New Year ❤
@@toddwest8618 thank you! 😃
I hope you had a nice Christmas!
Happy New Year!
Merry Christmas I will see you in the new year. God bless.
Thank you!
Merry Christmas and Happy New Year!
For those steel pieces in the cast aluminum motor ends, I've taken to using bolt cutters to chomp at the Al. Less messy than the grinder and quieter too❤
@@bentleyalder5492 it wasn’t in the cast aluminum, it was rusted on the steel shaft of the rotor. Otherwise I would’ve just used a hammer lol
I appreciate you watching.
Merry Christmas and a happy new year brother thank you for sharing this very enjoyable video with us six stars brother
@@josephcormier5974 thank you brother!
Merry Christmas and Happy New Year to you and yours!
Excellent episode brother may you have a blessed Christmas see you in the new year take care stay safe regards from a cold wet England
Merry Christmas and Happy New Year brother
God Bless you and your family for a Merry Christmas and a safe and happy New Year. Praying for Adam as well.
Thank you!
Merry Christmas to you and your loved ones and especially to the little fella
@@jwall6006 thank you ! That is much appreciated!
you the man
you the reason I enjoy scrapping
@@Sandy-u1o thank you, you’re too kind.
I appreciate you watching.
Your more advanced in scrapping than what's allowed in Australia. In our scrap yards they don't give you appliance price They classify this as junk.
@@PhilipRichards-w6u yeah I guess it depends on the individual scrapyard.
Good luck with the upcoming surgery Adam . I think Mike the 🐛was impressed with you pile of copper wire.
@@theaussienurseflipper.8113 very nice of you to say!
I think you might be right 🤣
Merry Christmas and a safe happy New year to you James and your family.
@@theaussienurseflipper.8113 thank you so much.
Merry Christmas, Graham!
@theaussienurseflipper.8113 thank you ! I greatly appreciate it!
Hey SiA! Sorry i couldn´t watch and comment earlier, i was ill. now im feeling better. Wish you happy holidays, pls go on next year with your videos, i will keep watching them! Have a good time, mate!
Oh no, I’m so sorry you’re feeling ill.
Good, glad you’re feeling better my friend.
Merry Christmas and Happy New Year!
Thank you very much for your support this last year.
Take care and see you in 2025!😃
Merry Christmas! Sweet scrap show. Congrats Edwin. God Bless Adam
Thank you my friend!
Merry Christmas and Happy New Year to you and your family!
@stevesrt8 thanks buddy I really appreciate that!
Good luck to Adam with his surgery. You will do just fine so don't stress too much. I had lower back surgery years ago and am so glad I did to relieve that pain.
Congratulations to Edwin
Good info about seperating stainless and aluminum.
Nice haul
Merry Christmas and Happy New Year
Thank you for sharing those words to Adam! 😃
Thank you my friend for everything.
Merry Christmas and Happy New Year to you and your family.
@GDSavingThePast thank you that means a lot. I hope it am as lucky. I sure would love to be back to normal and scrapping ! God bless and Merry Christmas
@@scrappingonthefly77 Good Luck
@@GDSavingThePast ❤️
Prayers for Scrapping on the fly.
That was fun to watch you scrap.
God bless you and Merry Christmas!
Thank you God for sending your Son, Jesus to save us!
Thank you brother, I know he’ll greatly appreciate that.
Thank you, I had a lot of fun scrapping it.
Amen, brother, Amen!
Merry Christmas to you and yours.
@Followerofchrist878 thank you very much.
@@scrappingonthefly77 your welcome
@@scrapitall200thank you! Merry Christmas to you too
That’s a big ole juicer! There’s a lot of goodies from that thing! Hahah hello! 😂😂😂 I can’t stop laughing!! Little buddy Mike 😂😂 congratulations to the winner! That a big ole motor! I still think that’s cool how you do that with the machete! It was definitely worth scrapping buddy! Another awesome video god bless hope you have a great Christmas and a happy new year buddy!
Sure was, I’ve never seen something like it.
😂😂
Heck yeah my friend, and it was so much fun.
God bless you. Merry Christmas to you and your family brother.
Awesomeness!! Very enjoyable video. 🙏
Thank you brother.
Merry Christmas.
You are such an amazing teacher, Mr. Miogi, your student, Danielson.
Thank you, Danielson. Now remember, wax on wax off 🤣
Merry Christmas!
That an amazing item they don't make them like that anymore. Good haul of goodies . 👍
A tip if you don't mine . = I use u a thick aluminium plate under the transformers / motor . With the machete. The sharp edge doesn't get damaged when you hit the sold aluminium plate and the edge last longer . Hope this helps pal
It was so awesome.
Yeah I want to get a piece of leather or something to put under it. I should try a junk of aluminum sometime. I appreciate it.
@scrapitall200 no problem at all. Thankyou so much for taking the time to read / reply to my comment. Have a great Christmas 🎄 😀
@@PeterCumpsty you’re welcome!
Merry Christmas 🎄
Such a pleasure to watch another one of Your videos! Great content, clear and concise information, thank you! Did you ever figure out what the piece of machinery was that was scrapped out? Prayers for the person mentioned in this video! God's Blessings on You and Your Journey along this scrap trail you're following!🎉
Thank you brother!
It is a juicer and food processor, but there is parts missing.
God bless you.
Merry Christmas and thank you for all the support.
I have never had a half copper half aluminum motor
I’ve had a few, some of them are coated in the same color and the outer windings will be aluminum and inner ones copper.
@@scrapitall200 crazy
G day from Ont. Boy interesting aluminum &copper together.
Yes Merry Christmas, & healthy happy new yr to U
Ths
Thank you buddy!
Late Merry Christmas and happy new year!
Hope you’re doing well.
Another enjoyable video as always! 🙏 For your friend Adam. Merry Christmas and may God continue to bless you too!
Thank you brother!
Merry Christmas to you and yours.
God bless you!
@@stackerMannsrabbithole thank you for the prayers!
@@scrappingonthefly77 🙏💚
Merry Christmas and happy New Year to you too. 🌲☃️🎊🎉Prayers sent for Adam as well !!!
Thank you so much!
I’m sure Adam greatly appreciates that.
Merry Christmas
@tomsayers457 thank you for the prayers!
Merry Christmas and Happy New Year to you also, May God bless you in 2025. I have been praying for Adam everyday as well as all my brothers and sisters in the scrapping family. See you on the next video
Thank you brother!
That’s awesome, our prayers are making a difference and I know Adam greatly appreciates it.
Merry Christmas and Happy New Year.
@GeorgiaDogScrapper thank you brother. I appreciate it very much! Merry Christmas!
@scrappingonthefly77 Merry Christmas to you too brother, I will reach out to you this week. Take care
nice heavy aluminium scrap
@@taunusrunner3767 heck yeah, some really nice pieces.
Good morning from Ontario, my friend.
Good morning my good buddy. Have a wonderful time there!
That's a luna moth caterpillar!! She's pretty uncommon - thanks for being good to our creeping, crawling friends ... Big rare moths are all the rage . It's like finding a pile of gold memory or old water fountains or old tanning beds hahaha
BTW you can sell a bug like that for decent money..
@@AndrewKozar-j1n oh cool. I’ve never heard of Luna Moths before.
Nice bunch of insulated wire are you going to strip it
Heck yeah buddy, every inch of it.
@@scrapitall200 nice you should do a stripper video
Have faith Adam and have courage God is watching over you all will be well.🙏🏻😊
Amen!!
Thank you.
@patrickschoenpflug thank you Patrick!
That's a really cool find. I've never seen one of those but I would have tore that sucker down. Have a great Christmas, buddy. I'm on rest mode now for a couple of weeks.
It was cool and definitely a lot of fun.
Take it easy my friend, get lots of rest and Merry Christmas to you, Gerri, River and good ole Banx
Merry Christmas Happy New Year
Thank you!
Merry Christmas and Happy New Year to you as well.
We used to have inch worms all over around here years ago, but I rarely see any now
Inch worms are awesome, but I don’t believe that was one of them. Someone said tomato worm or something like that.
I haven't gotten one of them. That's cool
Definitely was cool. Thanks for stopping by. Merry Christmas.
Merry Christmas and a Happy New Year!
@@deborahclark1136 thank you so much! 😊
Merry Christmas!
Thank you.
Merry Christmas and happy new year.
I’m surprised Adam didn’t guess 77
Right? Like it’s right there in his name lol
@@nicejunk666 i didn't feel like it would be fair for me to join since I already have 2 calendars !!
I wish you a Merry Christmas and have a great holiday season!
@@laurentlelouer7341 thank you so much and too you and yours!
Good luck Adam.. Congratulations to number 77.. Another great video James. Also when u sharpen ur machete can u show how u sharpen it. I have one that needs to be sharpened but I dont know how to sharpen it.. Merry Christmas to u and ur family James.. ❤👍🎅🤶
Thank you my friend!
Yes I will definitely show that in a video.
Merry Christmas to you and yours!
@@billd7829 thank you ! That means a lot !
@@scrapitall200 I appreciate that. Thank you.
You need a hydraulic Press to push out that sleeve
Absolutely! Give Santa my address 😂
@@scrapitall200 I would but he might see your face
@@nicejunk666 🤣
Switches also do switch things
They do? Now you tell me 😂
@@scrapitall200 🤣
Wishing you a blessed Christmas and New Years. See you in 2025
@@wolfonthehill5134 thank you!
Merry Christmas and Happy New Year to you and all of your loved ones.
Make sure you grind tanks could be stanless
@@curtispederson9390 that canister was aluminum, I checked
Mike the 🐛😂
Idk why that name came out 🤣
What little green caterpillar you had there was a tomato worm that will be a moth, I do believe.
Neet little contraption you torn apart, I would do the same to get the most value out of it rather than spread price!!!
Oh ok cool! Thank you.
Yeah and plus it was a lot of fun to scrap, definitely worth it.
Thank you so much for watching
Hey Y'all
Hey my buddy
You have a motor, a pump and a little green worm. 🤣🤣🤣
What more could a guy want 🤣
What brand of nippers do you use (Red Handle)? Thanks
@@arodyanksfan the brand is Doyle and they are wonderful.
How do you deal with wind & snow with your shop/ canopy? Im looking to do something similar in North central Pa
@@joleepack6512 it’s held up really well with snow but I think the most I had on it was about 18 inches of fairly dry snow.
I’ve got it bolted down to the floor I built so it’s not been bothered by the wind at all. It’s been through 50 mph winds with gusts up to 60 mph.
It’s made by Shelter Logic
My only complaint is the sun eats the material and it only lasted one summer but I bought some heavy duty tarps and put over it. No leaks at all. Hope this helps.
A wire scrapathon 👍. What happened to using the axe? 🎅🏼
Maybe but I don’t think people want to watch wire stripper that long lol.
The hatchet is better on transformers, the thickness doesn’t work well with motors in my experience.
I see you got jokes. Just want to throw me out in the wet grass so a bird can eat me. Tks. Cool unit to breakdown.
Idk why that name came out 🤣
It was definitely cool and a lot of fun.
A moth it will be and fly a way
That’s right.
A wire scrapathon 👍.
You want to see wire stripped for an hour? lol
It probably still worked
Did you watch the video?
The motor was rusted
The aluminum was corroded
The pump was seized
Missing parts
😎👍👍👍❤️🎄🎉🙏
Thanks buddy!
Merry Christmas!
I think it’s a caterpillar
Yes you’re correct, my brain wasn’t working that day 😂
Mike? I would have called it Cat as in the name Cat er piller.
Idk why that name popped out, but cat would’ve been much better lol
🤙🤙👍🙏🙏✌️
@@piecesofpete5921 ✌️👍
Poke Poke 😅😂 wonder what it’s scrap value is 😅
@@BushDogScrapper Mike is invaluable 😆
@ he truly is Priceless 😆
@@BushDogScrapper😂
Looks like it used to juice oak tree’s
Right! 🤣
What a beast lol
Oh no. I knew your in the calendar but as in "Home Improvement" I figured you would be like Wilson and never show your face.
@@richardhulbert9480 oh man, that would’ve been a great idea for that 😂
Yes, there is a green, "copper underwing" pattakitter. And no,.... you cannot scrap them like you just did to your wife's last juicer. They are genderless so we call them they, and if they wanted to be in the grass, they could have been easily. They chose the enclosure so they can spin without harassment .
Then Krampus kicked them out of their home and threw them to the predators on christmas. It's an old story.
Good thing I don’t have a wife 🤣
Nah that little green alien needed to get out of my shop 🤣
Thanks for stopping by my friend, hope you’ve been doing well.