Thanks for posting up about what type cells those are. An you did a amazing job, they do look like the md 12,000 .1 amps. I own three those md Tara amps . I was useing limitless 12ks cyber bank for one vehicle. I want to make my own battery bank an this is perfect.
Appreciate you taking the time to watch my content. Those Limitless cyber 12k batteries are nice but i feel you'd gain by building your own batteries with different cells. Just be sure to supply those 12ks with the proper reserve and you'll be really happy you did
@bigkato3134 I picked them up locally sometime ago. Now they're sold out. I know someone who sales them but he builds batteries. Companies called Northwest Lithium
I have one for it but just haven't installed it. Honestly, I've been running Cells similar for the past 5 years or so without a balancer and never had any issues with my cells
@BIGJURAY20 koo I have a couple more questions? Does that charger have a cigarette lighter charger to it? Is the cord long enough to reach from the inside of the car to the trunk? Can it charge Ying long lithium as well???
Using externally u can bypass the fusing to just charge the battery alone. I usually charge the battery with the Amplifiers disconnected from the battery
What I am confused on, I have a 70ah cmax bank. Coventry said that it ship it at 30% charged. But when I recieved the bank, it was resting at 15.3v. Well I didn't charge anymore. I installed it. Well my alternators charge at 15.4 to 15.6v. My amp remote bass knob voltage says the amp is seeing 15.9v and when the bass drops hard enough the voltage drops down to 14.8v. Any advice?
Oh yea bro you're good. You could charge a little higher but 15.9v is great and 14.8v at full tilt is good as well. If you grab another 70ah you should barely drop at all
@@BIGJURAY20 please somebody I think I plugged the remote wire into a speaker Output, it was dark the amp behind my seat and it lit up then shut off to never turn on again.
I wouldn't recommend installing in dark areas. But there's a chance the amp maybe or may not be bad. Try testing it to see if u get power without the subs hooked up to it
@@BIGJURAY20 yeah and eating McDonald's isn't killing you right now butttt .. that England is completely inadequate it can swivel and it will buckle on the edges if those cells decide to swell. You have to use a minimum of six threaded bolts and something like channel or box tubing to build the case and obviously lined with something like plexiglass. Because I've seen people charge those cells wrong and they decide to flex out they will buckle that angle iron like it's nothing
@@SheikhN-bible-syndrome oh yea I'm well aware of what these cells can do if improperly used. As long as they're properly compressed and doesn't see below 14.8v for long and no more than 16.2v they should hold up ok
Yeahhh mane! Looks great!
Thank you bro I really appreciate it trying to get it going
Nicely done bro 💪💪💯💯
Thank you I'm trying to get things going
Fantastic stout voltage sir😜👍
Appreciate the love bro thank you for tuning in
Thanks for posting up about what type cells those are. An you did a amazing job, they do look like the md 12,000 .1 amps. I own three those md Tara amps . I was useing limitless 12ks cyber bank for one vehicle. I want to make my own battery bank an this is perfect.
Appreciate you taking the time to watch my content. Those Limitless cyber 12k batteries are nice but i feel you'd gain by building your own batteries with different cells. Just be sure to supply those 12ks with the proper reserve and you'll be really happy you did
@BIGJURAY20 Where Did you purchase those insight cell
@bigkato3134 I picked them up locally sometime ago. Now they're sold out. I know someone who sales them but he builds batteries. Companies called Northwest Lithium
Where’s the balancer
I have one for it but just haven't installed it. Honestly, I've been running Cells similar for the past 5 years or so without a balancer and never had any issues with my cells
I'm at 24,000 too! just have to do another reveal on my other amp
Well Damn bro I'm looking forward to seeing your updates
👍👍👍
VERY NICE BRO!
Thanks a lot bro really appreciate it
@@BIGJURAY20, looking forward to the next video on how this does.
I'll be uploading it next up soon
@@BIGJURAY20, I'm very interested in these cells. Looking forward to your review. I might have to send some cash your way.
@@BIGJURAY20, if you don't mind me asking, where are you located?
This cells from what car and year come in out? Btw very nice bank build!!
Honda insight g3 (3rd gen)😊
Nice bank
Thank you bro i really appreciate it
What are you running for your stock battery for your car?
Just a regular battery in this truck. But i by passed it when i ran a system
Nice bro, do they have these on battery hook up?
I didn't see them available there but I'm sure they will people usually buy out their stock whenever they get cells
Do you have to have the car on to charge the bank with that lithium charger???
No, it's good to charge the battery with car off. So when the alternator is powered on it's maintaining a fully charged battery
@BIGJURAY20 koo I have a couple more questions? Does that charger have a cigarette lighter charger to it? Is the cord long enough to reach from the inside of the car to the trunk? Can it charge Ying long lithium as well???
Silly question but do you disconnect anything while charging in the car ? Like fuses or anything?
Using externally u can bypass the fusing to just charge the battery alone. I usually charge the battery with the Amplifiers disconnected from the battery
In this video i charged the battery with the amplifier connected. It's still no issues either way
@@BIGJURAY20 appreciate it man just didn't wanna lose my radio settings disconnecting everything if I didn't have to.
Do you build insight banks for sale
I don't but there might be someone who could. Try northwestlithium.com/
Nice do you have any lithium batteries for sale
I don't but i can give you a website that sells similar lithium batteries
northwestlithium.com/
@@BIGJURAY20 ok thanks bro
No problem
What I am confused on, I have a 70ah cmax bank. Coventry said that it ship it at 30% charged. But when I recieved the bank, it was resting at 15.3v. Well I didn't charge anymore. I installed it. Well my alternators charge at 15.4 to 15.6v. My amp remote bass knob voltage says the amp is seeing 15.9v and when the bass drops hard enough the voltage drops down to 14.8v. Any advice?
So u a charging it at 15.9v and drop to 14.8v at full tilt?
@@BIGJURAY20 yes sir. I got two ohio generator 300amp alternators dedicated to the cmax. So I have 3 alternators total
Oh yea bro you're good. You could charge a little higher but 15.9v is great and 14.8v at full tilt is good as well. If you grab another 70ah you should barely drop at all
@@BIGJURAY20 I planned on doing two 70ah banks stacked. I got a two salt 4ks strapped at 2 ohms. I want to do three salt 8ks at half ohm each
@@tee2896 with 3 salt 8k you should be ok with 140ah of Cmax. You have the 5ah cells?
How can I request a built?
Where are you located?
Where's the balancer?
I didn't put a balancer on it was up to the owner. I believe he was going to get one at a later time
Can you build me one for a 5000rms amp
Where are you located?
@@BIGJURAY20 San Antonio Texas
Anyone know of a taramps md8k repairman? All the LEDs lit up then shut off and won't turn back on!!!
There are a few amp techs over Facebook that can help
@@BIGJURAY20 yah I'm not on there anymore a link or anumber be really bada$$
Oh not sure who but hopefully someone who does shines in
@@BIGJURAY20 please somebody I think I plugged the remote wire into a speaker Output, it was dark the amp behind my seat and it lit up then shut off to never turn on again.
I wouldn't recommend installing in dark areas. But there's a chance the amp maybe or may not be bad. Try testing it to see if u get power without the subs hooked up to it
That compression is crap crap crap
Well it's holding strong with 2 8ks on 2 18s no problem. But who knows what will happen over time
@@BIGJURAY20 yeah and eating McDonald's isn't killing you right now butttt .. that England is completely inadequate it can swivel and it will buckle on the edges if those cells decide to swell. You have to use a minimum of six threaded bolts and something like channel or box tubing to build the case and obviously lined with something like plexiglass. Because I've seen people charge those cells wrong and they decide to flex out they will buckle that angle iron like it's nothing
@@SheikhN-bible-syndrome oh yea I'm well aware of what these cells can do if improperly used. As long as they're properly compressed and doesn't see below 14.8v for long and no more than 16.2v they should hold up ok