Building A 240ah Cmax Lithium Car Audio Battery
Вставка
- Опубліковано 7 вер 2024
- Using 24ah Cells To Build Up To 240ah Of Lithium
This Battery Is Being Built For My Good Friend Nate Team Captain Of FDZ Audio
Ordered The Busbars From Coventry Industries
Hope You Enjoyed The Video
Be Sure To Stay Tuned In
For More Car Audio Footage
#CoventryIndustries
#BIGJURAY20
Appreciate Big dog..... I been doing reviews on this series 1 battery an u provide to me that this battery really doing the work on a stock alternator an no big 3 😮😮😮...... Ill be getting 1 this month..... My whole system bout 6k altogether bass 5k mids an high 1k......so i know it wont be a problem..... BIG SALUTE BIG HOMIE for ur time an information
Happy this video could help and hope for all the best with your system
Man that is gonna make some real power! 1.1 gigawatts! I want a C-Max so bad man. I’m just stacking my play time coins until I can grab a set. Still liking the vids.Keep ‘em coming
Lol 1.1 gigawatts 😆 🤣 😂 appreciate your support bro. Once u get your bank I'm sure you will be very happy with the reserve
@chilo Contact me over Facebook or Instagram
Very nice información of the cmax built bank for car audio
Thank you I tried to mention as much as I could during video
I'm trying to do research about lithium because I'm going to need a power bank for my new setup and I've only ever used AGM. These days it's all about the lithium but I've always been scared of it. You make me feel a bit more confident about building a bank. I'll most likely be going with LIFEPO4 cells being they can be used with a AGM battery without a isolator. Great job again!
That's a great idea to do. That's exactly how i felt about lithium after using Agm for so long. If i can get comfortable enough to build a lithium bank I'm sure you can too. Best of luck with your build
@@BIGJURAY20 thanks
@BIGJURAY20 if I need any advice would you mind if I reach out?
@Tony Foley No problem bro happy to help out best i can
@@BIGJURAY20 thanks
Good job on describing all the details. I have a full Sound Stream install Ill post it later. Thanks
Thanks for the love. What are you running?
@@BIGJURAY20 Im running Sound Stream TXP 18000 to 2 12" DVC 2 ohm Tarantula subs TXP in a fourth order enclosure.
Sound Stream 4 channel for the mids and highs
Mechman 240 amp Alternator with two Centennial Group 31 batteries
Nice system only thing I see wrong are the ohm load of your subs
@@reyeslozano5598 If you had dual 4 ohm u could've ran your system at 1 ohm for more output from your amp
@@reyeslozano5598 With a 4th order it may not matter though. What vehicle do you have this system in?
Great job man appreciate every little details keep it up, Can you send me a link to where I can order those exact same cells, are those Cells 3.5v or 3.7v per cells, I will build my own one by looking at your video, so these 240Ah bank are they at 12v or 15.5 v after finish put together
Appreciate the love bro the cells charge between 3.7-4.2v
So once the battery is completed 14.8-16.8v
These days Facebook is a good source for just about anything Audio related. There are Lithium groups where people sale module such as the one in the video to Do it yourself
Hmu if ya need a bank of 21 cells. I'm trying too off one for 250
@@TheAnthonyBrandi Where are u located
Great instructional video it can’t be any simpler 😏
Happy you feel that way bro thanks for watching
Good video. I’m learning and needed a more in depth video. Thank you
No problem happy this video could help
Great video my man! This was perfect👍🏼👊🏻
Thank you I'm happy my video was helpful
I am still looking for one of those C-Max banks for the up coming project.
What area are you in?
I am in Georgia
No need to apologize bro, We’re not trying to blow our bank up either.😂
How many volts are each of those cells individually/by themselves?
These should be between 3.7-4.2v mines are charging around 15.8v so 3.95v each cell
Whats the highest these can be charged at? And whats the lowest the can be charged at and still used in a setup? Nice build👍
Charging is 14.8-16.8v but 16.8v is 100% State Of Charge and could shorten the lifespan of the cells. If you can maintain 15v area they should last up to 10 years depending on condition of cells used
@@BIGJURAY20 thx for the reply. I charge at 14.8. Think that's ok? Or should I go with a different cell? Running a jp63 and jp234 on a daily
@@brunom1280 keep what u have and try and charge a little higher. The higher the charge with Cmax the better the reserve
Clean build really nice
Thanks a lot bro really appreciate it
Aye 27 minute video! Let’s go! 😃
Lol ikr
MONSTRO!!!!!
U know it
@@BIGJURAY20 one day I’ll be like you
Nicely done bro 💪💪💯💯👍👍
Thank you
Dam that shit came out looking clean bro! 💪🏼💯🔊🔋
Thanks a lot bro I really appreciate it
U know what to say bro dope as hell
Niiiiiiiiice 🔥
Thank you Bestie really appreciate it
Movin on up 💪💪💪
U know it bro
How much did it cost you to buy those cells? I want about 360ah how much would it cost
U can get cases for about 300-500 each. So anywhere from 900-$1500 for 360ah if u get these cells
Thats a beast!!
Bro definitely is
Hey man I have a 120 ah big cell . I'm wanting to add another 120 I could use the same compression side bars but would just need longer threaded rods right ? TIA!
Yes but if u already have one built it could interfere with spacing if u pull apart I'd run 2 120ah banks
@BIGJURAY20 ok thanks man. One kore question could I run a small cell and Bic cell together . They would obviously be in different banks . Just curious if the difference in discharge rate would hurt anything
@Bass so loud it HZ I have seen someone do this before and his voltage held up but i feel you wouldn't be getting the best from either bank since they have different charge and discharge rates
@BIGJURAY20 Alright man that's what I was curious about. Much appreciated!!
Honestly if you haven't already done so. I'd look into the smaller cells and get a good enough bank to support the needs of your system and sale the bigger cells. But then again 240ah of the large cells can still do justice but it's comparable to around 95ah of the smaller cells
How do you charge the battery pack, What voltage
Damn ima need to sell my lithium’s so I can get some C max bro! I heard they better than Yinlongs by far 💯💪🏼🔊
Yea I'm not sure how much better but I did hear the same
please please please tell me where you got the cells i can not find them for the life of me man. i m a diy guy . please reply if you can man
Well there are many diy lithium groups on Facebook that help. There are lots of people who sale cmax and other type of lithium over Facebook. But you can also source junk yards for cells as well as Ebay
How much watts can these take vs the 120ah
A 240ah can support about 20-25k
How many ah can 1 alternator Handel to charge safely . And the amperage in alt .
Honestly, not sure exactly how many amps of charging a battery would need based on the amp hour. I've had a single 320 amp Alternator charging a 240ah bank before. It could charge faster the more amperage given but it still held fine
Clean build brother! Got a question if you don’t mind. I have a about a 6k wattage system with my 3 amps jp23v2 jp234 and jp84. 320 HOA. Under the hood I got a XSD5100 60AH. If I wanted to go LiFePo4 what would be a suitable AH bank? I bought a 20AH Ampere LiFePo4 battery already they use Grade A cells in their batteries. I was wondering if I need more. According to skyhigh car audio techs Lithium is double the power of Agm/Lead so 10Ah of lithium is like having 100ah of Agm/Lead. And LiFePo4 uses 90% of its density while Agm/lead uses 50.
Don't have much experience with lifepo4 honestly but 40ah should sustain 3k for a full system. Your 20ah should hold up ok during play much better then the 60ah agm you have
Is the battery you have ok to use for car audio?
@@BIGJURAY20 yes it’s safe to use with car audio. LiFePo4 is the same as headway. You just have to make sure it’s Grade A or B cells whichever company you use.
VERY NICE BRO!!!
Appreciate it bro wasn't sure how it would come out on video
@@BIGJURAY20 Great bro! I looked on their website I'm trying to figure out what size I should go with!?!?
@@74midwestbass74 if u go with 5ah cells look into a 90ah. You maybe ok with a slightly smaller bank but those 8k want power
Can you put up a link to the flange hex nuts so I can order the correct ones please
M5-0.8 Serrated Flange Hex Lock Nuts, 304 Stainless Steel 18-8, Bright Finish, Full Thread, Pack of 100 a.co/d/ck8ynup
How much wattage can this hold?
This Battery can support 20-25000 Watts of power depending on Alternator Amperage
How many watts does this support
This Battery can support 20-25,000 watts
Big cmax bank
Need all the Power
How much does it cost to build a bank and where can we buy the cells
It depends on where you get your equipment from and how big of a battery you plan to build. You'll save by doing it yourself and you'll have luck sourcing cells via Facebook
Is that an Armada? Or QX56?
It's An Armada
Does it need some kind of balancer
Could help to use one but does just fine without
How much would a 100ah bank of Cmax cost?
Depends on where you get your battery from but 100ah can cost around 1500 give or take
@@BIGJURAY20 ah okay thank you I’m running a 45ah bank lto lithium bank at the moment i do wanna get some Cmax in the future tho Forsure have a good day.
@AudioAddict. If you're on Facebook give send me a Message @BIGJURAY20 and I'll be sure to help you with groups you can get affordable lithium
What do these come out of ?
These come out of a 2013-2018 Ford Cmax
Beautiful build, where can I find cells to build this ?
You can find them on eBay and some lithium battery websites but it's much easier to find over Facebook
I have in stock right now big cells.. dm me
Did u make that bank or did u buy it as is? Some of those hybrid batteries look exactly like that
He didn't build it. It's A Ford hybrid battery probably from a 16 and up Fusion. I manage a Pic A Part in UT. Lots of hands on experience with lots of different hybrid batteries.
I’m building a 90ah with the thinner cells.
Very Nice
How much torque for the angle iron?
I've heard anywhere from 15-20 ft pounds
Them cells look thicker than normal. Are they the same voltage? Like 3.5-3.7v
Yes all cells are even in size and all balanced out
@@BIGJURAY20 I meant like the thickness of them cells are like 1” an every other cmaxx bank I see has thin cells. Like only a 1/2” thick
Where did you purchase the battery from?
@@chrisbordelon2782 These are the 24ah cells they're thicker than the 5ah cells
@@chrisbordelon2782 Picked up cells local to me
how thick is the angle iron?
I got 3x3 angle iron but unsure of it's thickness
Hey where can I get those buss bars???
www.coventrycaraudio.com/shop
Where did you buy those batteries?.
I bought them from someone locally
There are lots of people selling them over Facebook
How much did it cost
$1300
@@BIGJURAY20 how many Ah was it
@@BIGJURAY20 sorry I got it. Just read it. Lol
Is those the scib cells?
No these are 24ah Cmax Lithium cells
i have 1 of them how much can i make with one
Is yours a 240ah as well?
@@BIGJURAY20 no its just like one you have it is a 21 cell 24ah needs to be made into one
@@jtsgarage2999 ok so u have 120ah
120ah Bank is good for some decent power. I had one with a 320 amp Alternator and clamped 12k dropping from 15.6v to 14.8v
@@BIGJURAY20 i have a 240 amp michman alt guy said he can make a 128amp hour but have to charg @ 15.7 ish
You sell these ?
Not really just help friends from time to time
Fat cells are better?
Yea i still have some. Just trying something new
@BIGJURAY20 which vehicle the faT cells come from ?
I'll do a video in the near future comparing the two
Ford Cmax believe 2013-2018