Much easier to zero on the hole diameter and use the other side of the calipers to measure the hole to hole (outer edge to outer edge). Same concept but you can skip finding the screws.
To get rid of that roughness on the overhang replace the big fillet with a 45 degree chamfer and then smooth the transitions with fillets. Looks almost identical but without the roughness-inducing overhang angle.
I love chamfers for sidelining supports while getting great print quality. Fillets are great but fall short on larger diameters just before and through midarc. Like you said, round out chamfered edges with fillets and you get a decent compromise on the overhang where gravity works against printing.
Long time listener, first time caller. I'm self taught in F360. Spring of 2020 was when I first picked it up, and I'm always learning new things. This one video had me swearing out loud over how simple you did some of the things I go through significant effort to complete. Extrude from surface/object from a single sketch? No thank you. I'll just create a new sketch on that surface and copy/paste the edges into the new sketch. Holes? Edit the original sketch and draw a circle. Then extrude through it. Doing things the stupid way all this time, and you just blew my mind. I love your videos, your voice is great for voiceover work, your knowledge is next level, and your sense of humor is akin to mine. If I wasn't already subscribed, I'd subscribe again.
I agree, ive been going the long way around to produce easy things, now I've learned a few tricks here it will save me hours and clean up my confusing time line. Lol. Do more of these pls.👍😎🇬🇧
yes, this video is really well made, he made a red one with PLA is just perfect to show it for the video work, i am sure he has already made the black PC one way before hand, so he is solving multiple problem in one go. really really smart, and respect him.
I'd recommend adding in all fundemental features (holes included) prior to applying fillets so you can roll back all of those curvy features to make modifications to core geometry and add in new features after the fact with ease. Modeling on complex and curved surfaces causes lots of unnecessary difficulty especially on more complex parts.
Adding the holes before the fillets would probably prevent the filet tool to work properly. Worth a try but sometimes it is a bit difficult to make it work on complex geometries.
I think he chose his order of features very carefully there. Large fillets like that can be VERY ornery in fusion. Sometimes the fillet edge can hit the border of another feature (like a hole) and the operation fails there.
This is class, being able to see the whole process from idea, to CAD model, through to the slicer and out of the 3D printer. Cannot tell you how long I've been waiting for someone to show the entire thing from start to finish. Nice office, too.
James, thank you so much for your F360 tutorials! Your tuts are not only useful items but your teaching/illustration style is some of the best. Please keep ‘em coming.
I've never seen "tutorials" abbreviated to "tuts" before. Thanks for sharing that. However, my brain wants to say "tuts" aloud as "tuhts." So a "tuh-torial" just sounds off to me. The think of the word as being pronounced "too-tor-e-als" so that instantly compelled me to want to abbreviate to "toots" but I don't how well that would be recieved by others. This english language sure is something, ain't it? Sorry for the lengthy reply. 😁
@@glenj.taylor2938 Yes, the language is something! I would normally type things out instead of using contractions, especially when it's likely a lesser known contraction. I guess I'm just getting lazy in this age of text messaging and typing with my thumbs!
This is quite a coincidence. I just designed my own headphones hanger for the exact same reasons approximately two weeks ago. My initial design idea was extremely similar to yours, including screw placement. I instead went with a boxier design where both screws go through the back behind the headphones at a slight downward angle, and I left a hole in the front of the hanger to pass a screwdriver through for the bottom screw. My headphones have a fairly large pad, so I made the front wall fairly tall to hold the plastic part in. My design is symmetrical, and I had wanted more curvature like yours, but some thin areas of the print made filleting hard. I still got some rounding on all the edges of course. The interesting and challenging part of my design is that my headphones are flat one the front of the band and have a curve like a banana on the back side. So I wanted the back of my holder to be flat and the front to match the curvature of the band. I wasn't sure how to accomplish this, so I actually dabbled with 3D sketching in Fusion 360 for the first time. There were definitely some interesting challenges with it. I learned a lot. Ended up using the surface modeling features of Fusion a lot where I would create a shape completely from sketch lines in 3D including curved lines and then patch them until there were no holes. I then had to use the stitch command to make it into a solid object like usual. I learned some nifty tricks from your vid I def could have used too. Thanks!
I love how your content is so varied. I have a huge problem with floating between interests in the shop, and your channel having a nice mix of topics is such a nice thing to look forward to every weekend.
I really appreciate all of the CAD content. I don't use Fusion, because of the rapacious pricing, but the great thing about all parametric CAD packages is that, if you can use one, you can use any of them with minimal effort. I can translate your design process and intent into the package I use with no problem, and I've learned a ton in the process. Thanks!
F360's personal use license is free for 3 years and has full features with a 10 document limit (you can have infinite documents, just 10 active at the same time). I like it becuase it's very easy to use, but I've been wanting to jump to another CAD software because fusion isn't available on Linux and it's the only program keeping me on a Windows machine. Which CAD are you using or would recommend?
@@aszher For Linux, FreeCAD is probably the best package going. It's an open source project under continuous development. FreeCAD has a great deal of functionality, but from what I've seen, the interface will take a little getting used to, coming from commercial Windows software. There are a lot of good UA-cam tutorials and pretty good documentation to help the process along.
F360 takes a bit of training to get proficient with it, but once you get the hang of it, you appreciate how powerful it is and what new windows of creativity it can open, aka 3D printing to analysis and CNC. UA-cam content like yours and others for F360 training makes getting up to speed so much easier for new users.
Thank you for creating a tutorial that has some useful tips and yet doesn't take 2 hours to watch. I learned something from you today! And it's going to help me with a current project I'm working on.
I audibly signed at the "one weird trick" part but I knew you wouldn't let me down. Oddly enough, I learned more from your other tips than your mention of the fillet tool. Calculating the distance 1:40 - 2:07 for example. TOTALLY makes sense but..for someone who is a "learn as you go" kind of engineer...well...these things don't just come to you. All that being said. Thanks for the video hopefully I can find a way this knowledge on!
I just got a 3d printer and am trying to get into modelling my own parts. The last time I did any 3d engineering modelling was for a CNC project over 10 years ago. This video is a godsend from start to finish. Clear, concise, and logical.
Smooth curves are exactly what I need to work on in fusion 360. Perfect timing for me. Thanks love the videos and how you show the CAD to the parts you make.
As a self taught (stumbling) Fusion user, your videos teach me along with pushing me to continue my quest of learning the software…thank you for sharing
"One weird trick". This has got to be my most despised phrase! Glad to see you were just making fun! Love your videos! Wish I knew 1/100th about Fusion 360 as you!
7:10 holy crap I didn't know you could do that. I've been either drawing multiple sketches (when I didn't need to), or projecting geometry onto a new sketch.
Right away, 1:48 I learned something super useful that I never considered. Maybe I need to watch a "how to use calipers" tool because there are probably lots of things I hadn't considered.
As someone who is looking to get into Fusion, this is stellar on the detail. I love you clear you made it and I can’t wait to expand my skills using this as a learning tool. I can’t thank you enough for how great this is.
Wow, been using Fusion 360 for the last few years and I learnt so many tricks by just watching this short 15 minute walkthrough. I have found ways to get Fusion to eventually do what I wanted but now with some of these steps I will be able to do it more easily. New subscriber!!
Kudos for explaining in simpler terms how to smooth rough prints, also the clearence option for metric holes in fusion is amazing, i didn't knew you could do that, just impressive how knowing to properly use the tools can make 3D modelling so fast.
Awesome...Ive been himming and hawwing for months now, I might just have to break down and order the Bambu carbon, the parts are beautiful. Youre the first guy who has actually added the printer screen to the video, love it. Thank you.
Nice tutorial. I'm a caveman when it comes to Fusion...brute force, multiple sketches, etc. I don't know 99% of the techniques you used here. I could have gotten this with 3 or 4 different sketches, and about 8 hours. Honestly, I'd LOVE many many more of these Fusion vids! You do a much better job of explaining things than most of the "Tutorial" vids, even those that are "For absolute beginners" because those tend to be "well, you already know 3D modeling, we'll skip all of that and model this Jet Turbine, and since everything is intuitively obvious, you just use the 300 tools we've never discussed and look at that, Robert is your mother's brother, it's done!". Sorry, way too many of these "tutorials" are exactly like that. I've used your tool holder video techniques so many times now. LOVE it...simple, a bit time consuming, and a bit tedious, but it just works! :) Thanks James!
Dude, you rock for this! I'm used to onshape but trying to change over to fusion and in this one simple model there's so much info packed in! Amazing job. 🍻 I'll be referring to this one quite often. I hope your 2025 is going well so far!
I'm sure youve done a few since this video. But watching you step by step in Fusion was an eye opener for me. I had no idea about the hole tool. Please use this format as much as you can in the future.
as a novice, it's really cool watching some of these things that probably seem so simple to you. i didn't even know about the point option, much less the m6 pre-cuts for hole. thanks for the tips you didn't know you were providing in this video!
James, another thank you! I just used this tutorial to make my own headphone hook, although with a different mounting method. Your video made it all make sense and I've learned some valuable new Fusion techniques. Please keep this type of content coming.
I've been using fusion for about a year now, and I always learn something new every time I watch someone else use it. I have never used the hole tool for making screw holes. I can't imagine how many hours I've wasted by manually countersinking holes and making chamfers in them.
Thanks James. These practical tutorials are perfectly edited and are such a joy to watch and learn from. I always pick up at least one trick I didn’t know, and every time that new trick is another game changer for me in my designs. 🙏🙏🙏🙏🙏🙏🙏
WHAT A NICE TUTO! I´m a beginer in fusion and 3D stuffs, your video was so clear and simple that inrpiring me to move on. I was a little demotivated, must confess. Thank you!
I’ve been using fusion for years and only know I’m learning about the Hole feature ! (And also the trick with the calipers!!) Crazy content, thank you !
Thanks for sharing this. Fusion to me is like when I learned Photoshop so long ago. Nothing is really _hard_ but it isn't exactly intuitive either what tools to use when. I've enjoyed all your videos for what you make but I've especially enjoyed when you take the time to work through your Fusion design process. Thanks again.
Important note: *ALWAYS* add fillets and chamfers *AFTER* all your sketching, extrusion, etc.. Fillets and chamfers should always be the last thing you add to your model. Otherwise Fusion gets angry and can throw errors if you try to change your model and there are fillets/chamfers in the middle of the timeline.
Very good video, I have learnt a little more as I have just started with Fusion 360 and my Bambu printer. I bought it to print deck fittings for my 1/10 scale model of a Venice water taxi and so far the drawing/design and printing is going well but always keen to learn more. Cheers Ian, New Zealand
That looks really nice James. Just one tip from me, you can switch your 3d mouse into a 2d mouse for sketches, I find it a lot easier to look straight on a sketch. I use one of the two custom buttons to switch from 3d to 2d.
As a relative noobie to fusion 360, this is gold dust! Thank you 😊. Ive just designed my own, by using your excellent info... similar idea, but with a horizontal mounting bar, as its going into the edge of a 1" thick desktop.
I've been using fusion for about 4 years purely as a hobbyist, and you've taught me two things here that I wasn't aware of, the hole tool for screw sizes and with space for the bolt head!!, how have I missed that. And also extrude from body, that will save me extruding 100mm then cutting 95mm ! Thank you!
Thank you! I’ve been wanting to see your method and also which mice you like to use when in Fusion360. I learned a few things from your concise tutorial even tho I’ve been using it for 2 years.
this was so informative. and perfect timing considering i've just designed a headphone hanger with much more rudimentary skills lol. upping the gameeeee
Nice tutorial. I love these short ~ 15 min. tutorials. Even with my almost 20 years of CAD experience with different packages, there are always some of this little things that I pick up while watching them 👍 Putting the holes in before applying the fillets is one option but having too much geometry may interfere with putting on more complex fillets. Putting the holes in before applying the large fillet on the top would most likely have limited the size of the fillet.
James, when you are not busy we must get together and do a Vulcan Mind Mold, so I can obtain your CAD and Engineering knowledge. I'm a 65-year-old electronics tech(ret) and would love to do high-tech engineering stuff like you do. I was born too soon. Keep up the great videos I really enjoy them.🔫
Get rid of that seam, when ther is no need for it by disabeling (Z hob) "retract when layer change" in Printer settings under Extruder. You'll only have seams that make sense from there on.. switching between models for example Cheers and thank you for the spot on tutorial!
Looking good, James. I would probably use a contrasting color for the hanger just so it is visible enough that you won’t miss it when placing the headphones in their home, but since this is a daily use for you after a week you probably won’t even look at it when storing/retrieving the headphones.
Yes, Fillet function is your friend when you want smooth flowing transitions between faces like that. Granted I'm sure you know this James but in case not, and for others who don't, you can do that same center to center trick without the bolts by using the ID blades of the calipers in the holes themselves, ID measure the hole, Zero calipers, then just measure outer edge to outer edge between the two holes with the ID blades. Also what a lot people don't know is that this direct measurement trick only works correctly by itself if the two features are the same side (Same ID or OD depending on which way you do it). With that said, there is a pretty simple way to still do it when they aren't the same diameter. Simply measure each diameter, extrapolate the radius of each and then add the two radiuses together and zero the calipers at that number, then you can measure the center to center just as you would. Example, say that you have two round features, one 6mm and the other, say a 10mm. just add the radius of each (obviously 3 and 5 for this example) and open the calipers to that size and then zero them and measure just as you would
Yes, using the ID blades is possble, but I think that in this case that is not the easiest way to get the calipers in and handle them at the same time. On large flat parts I mostly prefer the bolt measurement because of this.
Thank you! This gives me a little bit of extra context for what I'm trying to do. My plan is to design an ergonomic cyclic grip for use in helicopter simulation. However, I still feel like I might have to start with clay and a 3D scanner to get a shape that feels good to hold. Hmm!
thanks I love Fusion and I always learn something new from your videos on Fusion. Oh and thanks for saying "Hey Google" and setting my google home unit into a panic trying to turn on my lights lololol
Nice to watch people design a functional part. Fusion (with the name change this is going to make searching a pain), is agonizing to get right, when you do.. its simple. But it take practice. And thats why its nice to watch someone finish a part, the build guitars are great as well.
I’ve been using calipers for 15 years and never thought about zero’ing the diameters of the pin to get on-center distance 😳 Nice trick
I feel dumb. Its obvious, super useful, yet I never even considered it using zero for anything other than closed positioning.
I must only find the zero button on my manual/analog calipers, now! 🤔
was going to say the same thing I feel like a caliper wizard now
Yep, I've got a set of those calipers too. Now I can get inaccuracy to three decimal places! "Looks about 15 to me. I'll use that."
Much easier to zero on the hole diameter and use the other side of the calipers to measure the hole to hole (outer edge to outer edge). Same concept but you can skip finding the screws.
To get rid of that roughness on the overhang replace the big fillet with a 45 degree chamfer and then smooth the transitions with fillets. Looks almost identical but without the roughness-inducing overhang angle.
WOah that is a great trick!
This is great! I had to ask ChatGPT to help me understanding it, but now everything is clear!
I love chamfers for sidelining supports while getting great print quality. Fillets are great but fall short on larger diameters just before and through midarc. Like you said, round out chamfered edges with fillets and you get a decent compromise on the overhang where gravity works against printing.
Long time listener, first time caller.
I'm self taught in F360. Spring of 2020 was when I first picked it up, and I'm always learning new things.
This one video had me swearing out loud over how simple you did some of the things I go through significant effort to complete. Extrude from surface/object from a single sketch? No thank you. I'll just create a new sketch on that surface and copy/paste the edges into the new sketch.
Holes? Edit the original sketch and draw a circle. Then extrude through it. Doing things the stupid way all this time, and you just blew my mind.
I love your videos, your voice is great for voiceover work, your knowledge is next level, and your sense of humor is akin to mine.
If I wasn't already subscribed, I'd subscribe again.
Yo mate, I did that double sub just for you 😂
And the great content as well 😁
I agree, ive been going the long way around to produce easy things, now I've learned a few tricks here it will save me hours and clean up my confusing time line. Lol. Do more of these pls.👍😎🇬🇧
yes, this video is really well made, he made a red one with PLA is just perfect to show it for the video work, i am sure he has already made the black PC one way before hand, so he is solving multiple problem in one go. really really smart, and respect him.
I'd recommend adding in all fundemental features (holes included) prior to applying fillets so you can roll back all of those curvy features to make modifications to core geometry and add in new features after the fact with ease. Modeling on complex and curved surfaces causes lots of unnecessary difficulty especially on more complex parts.
Adding the holes before the fillets would probably prevent the filet tool to work properly. Worth a try but sometimes it is a bit difficult to make it work on complex geometries.
I think he chose his order of features very carefully there. Large fillets like that can be VERY ornery in fusion. Sometimes the fillet edge can hit the border of another feature (like a hole) and the operation fails there.
This is class, being able to see the whole process from idea, to CAD model, through to the slicer and out of the 3D printer. Cannot tell you how long I've been waiting for someone to show the entire thing from start to finish. Nice office, too.
Slick! That tip about zeroing the cap screw head then measuring to get the centers is gold!
James, thank you so much for your F360 tutorials! Your tuts are not only useful items but your teaching/illustration style is some of the best. Please keep ‘em coming.
I've never seen "tutorials" abbreviated to "tuts" before. Thanks for sharing that.
However, my brain wants to say "tuts" aloud as "tuhts." So a "tuh-torial" just sounds off to me.
The think of the word as being pronounced "too-tor-e-als" so that instantly compelled me to want to abbreviate to "toots" but I don't how well that would be recieved by others.
This english language sure is something, ain't it?
Sorry for the lengthy reply.
😁
@@glenj.taylor2938 Yes, the language is something! I would normally type things out instead of using contractions, especially when it's likely a lesser known contraction. I guess I'm just getting lazy in this age of text messaging and typing with my thumbs!
This is quite a coincidence. I just designed my own headphones hanger for the exact same reasons approximately two weeks ago. My initial design idea was extremely similar to yours, including screw placement. I instead went with a boxier design where both screws go through the back behind the headphones at a slight downward angle, and I left a hole in the front of the hanger to pass a screwdriver through for the bottom screw. My headphones have a fairly large pad, so I made the front wall fairly tall to hold the plastic part in. My design is symmetrical, and I had wanted more curvature like yours, but some thin areas of the print made filleting hard. I still got some rounding on all the edges of course.
The interesting and challenging part of my design is that my headphones are flat one the front of the band and have a curve like a banana on the back side. So I wanted the back of my holder to be flat and the front to match the curvature of the band. I wasn't sure how to accomplish this, so I actually dabbled with 3D sketching in Fusion 360 for the first time. There were definitely some interesting challenges with it. I learned a lot. Ended up using the surface modeling features of Fusion a lot where I would create a shape completely from sketch lines in 3D including curved lines and then patch them until there were no holes. I then had to use the stitch command to make it into a solid object like usual.
I learned some nifty tricks from your vid I def could have used too. Thanks!
I love how your content is so varied. I have a huge problem with floating between interests in the shop, and your channel having a nice mix of topics is such a nice thing to look forward to every weekend.
I really appreciate all of the CAD content. I don't use Fusion, because of the rapacious pricing, but the great thing about all parametric CAD packages is that, if you can use one, you can use any of them with minimal effort. I can translate your design process and intent into the package I use with no problem, and I've learned a ton in the process. Thanks!
F360's personal use license is free for 3 years and has full features with a 10 document limit (you can have infinite documents, just 10 active at the same time). I like it becuase it's very easy to use, but I've been wanting to jump to another CAD software because fusion isn't available on Linux and it's the only program keeping me on a Windows machine.
Which CAD are you using or would recommend?
Mind that you just need to reapply after 3 years to confirm you still match the criteria, your designs won't vanish.
@@aszhera good Linux CAD Programm is also a thing what I'm looking for
@@aszherI like FreeCAD. A bit rough around the edges but does everything I need it to do.
@@aszher For Linux, FreeCAD is probably the best package going. It's an open source project under continuous development. FreeCAD has a great deal of functionality, but from what I've seen, the interface will take a little getting used to, coming from commercial Windows software. There are a lot of good UA-cam tutorials and pretty good documentation to help the process along.
F360 takes a bit of training to get proficient with it, but once you get the hang of it, you appreciate how powerful it is and what new windows of creativity it can open, aka 3D printing to analysis and CNC. UA-cam content like yours and others for F360 training makes getting up to speed so much easier for new users.
That center to center measurement trick is so handy! I also use it for internal features 🤑
Thank you for creating a tutorial that has some useful tips and yet doesn't take 2 hours to watch. I learned something from you today! And it's going to help me with a current project I'm working on.
I never thought about doing a single sketch and using that sketch for multiple extrusions. So clever
I audibly signed at the "one weird trick" part but I knew you wouldn't let me down. Oddly enough, I learned more from your other tips than your mention of the fillet tool. Calculating the distance 1:40 - 2:07 for example. TOTALLY makes sense but..for someone who is a "learn as you go" kind of engineer...well...these things don't just come to you. All that being said. Thanks for the video hopefully I can find a way this knowledge on!
I just got a 3d printer and am trying to get into modelling my own parts. The last time I did any 3d engineering modelling was for a CNC project over 10 years ago. This video is a godsend from start to finish. Clear, concise, and logical.
Just got my first 3D printer and am learning Fusion.... so seeing somebody good use it efficiently is fantastic. Nice job.
Smooth curves are exactly what I need to work on in fusion 360. Perfect timing for me. Thanks love the videos and how you show the CAD to the parts you make.
Thank you for making 3D design so approachable. Your videos have helped me feel more confident at making my own designs!
mind blown with just that caliper trick in the first minute
As a self taught (stumbling) Fusion user, your videos teach me along with pushing me to continue my quest of learning the software…thank you for sharing
"One weird trick". This has got to be my most despised phrase! Glad to see you were just making fun! Love your videos! Wish I knew 1/100th about Fusion 360 as you!
Exactly what I needed to learn, thanks bud. Clearly some great techniques on display here.
Thanks for the change up on intro and showing your computer work space!
Looooooot's of info crammed in a short video...very dense. Good stuff.
Watching your process in F360 is informative and inspiring! I’m still new and can stumble through a design, but this is super helpful.
7:10 holy crap I didn't know you could do that. I've been either drawing multiple sketches (when I didn't need to), or projecting geometry onto a new sketch.
You can also construct another offset plane and extrude from there.
This video taught me so much like doing multiple extrusions from the same sketch, extruding from an object and using a calliper :D
I've spent hours following tutorials and this video has just got me closer to what I need to be doing in minutes!! Thanks
Right away, 1:48 I learned something super useful that I never considered. Maybe I need to watch a "how to use calipers" tool because there are probably lots of things I hadn't considered.
Great tips. I appreciate how clear your explanation of the process is.
this was an awesome video, very basic, but showed a lot of valuable info. the caliper zeroing trick was slick. thanks for sharing!👊
As someone who is looking to get into Fusion, this is stellar on the detail. I love you clear you made it and I can’t wait to expand my skills using this as a learning tool. I can’t thank you enough for how great this is.
Wow, been using Fusion 360 for the last few years and I learnt so many tricks by just watching this short 15 minute walkthrough. I have found ways to get Fusion to eventually do what I wanted but now with some of these steps I will be able to do it more easily. New subscriber!!
Kudos for explaining in simpler terms how to smooth rough prints, also the clearence option for metric holes in fusion is amazing, i didn't knew you could do that, just impressive how knowing to properly use the tools can make 3D modelling so fast.
I like the style of design instructions with calling out the shortcuts.
Awesome...Ive been himming and hawwing for months now, I might just have to break down and order the Bambu carbon, the parts are beautiful. Youre the first guy who has actually added the printer screen to the video, love it. Thank you.
Nice tutorial. I'm a caveman when it comes to Fusion...brute force, multiple sketches, etc. I don't know 99% of the techniques you used here. I could have gotten this with 3 or 4 different sketches, and about 8 hours.
Honestly, I'd LOVE many many more of these Fusion vids! You do a much better job of explaining things than most of the "Tutorial" vids, even those that are "For absolute beginners" because those tend to be "well, you already know 3D modeling, we'll skip all of that and model this Jet Turbine, and since everything is intuitively obvious, you just use the 300 tools we've never discussed and look at that, Robert is your mother's brother, it's done!". Sorry, way too many of these "tutorials" are exactly like that. I've used your tool holder video techniques so many times now. LOVE it...simple, a bit time consuming, and a bit tedious, but it just works! :) Thanks James!
I love doing this trick. Came in real handy when I had to design an engine for my Solidworks class last year.
Dude, you rock for this! I'm used to onshape but trying to change over to fusion and in this one simple model there's so much info packed in! Amazing job. 🍻
I'll be referring to this one quite often. I hope your 2025 is going well so far!
I'm sure youve done a few since this video. But watching you step by step in Fusion was an eye opener for me. I had no idea about the hole tool. Please use this format as much as you can in the future.
as a novice, it's really cool watching some of these things that probably seem so simple to you. i didn't even know about the point option, much less the m6 pre-cuts for hole. thanks for the tips you didn't know you were providing in this video!
you make it look so easy. thank you!
Couple awesome little tips I just learned! Thanks for sharing your knowledge!
James, another thank you! I just used this tutorial to make my own headphone hook, although with a different mounting method. Your video made it all make sense and I've learned some valuable new Fusion techniques. Please keep this type of content coming.
Really enjoyed your tutorial of the design process for this part in Fusion 360! Would love to see some more!!
Another great video James. I really appreciate how you walk through and explain all the steps. Thanks again!
I've been using fusion for about a year now, and I always learn something new every time I watch someone else use it. I have never used the hole tool for making screw holes. I can't imagine how many hours I've wasted by manually countersinking holes and making chamfers in them.
Thanks James. These practical tutorials are perfectly edited and are such a joy to watch and learn from. I always pick up at least one trick I didn’t know, and every time that new trick is another game changer for me in my designs. 🙏🙏🙏🙏🙏🙏🙏
WHAT A NICE TUTO!
I´m a beginer in fusion and 3D stuffs, your video was so clear and simple that inrpiring me to move on.
I was a little demotivated, must confess.
Thank you!
I’ve been using fusion for years and only know I’m learning about the Hole feature ! (And also the trick with the calipers!!)
Crazy content, thank you !
You're abilities with Fusion 360 where I hope to be one day, great video!
Thanks!
Thank you for showing the finished product at the beginning of the video. 🏆
Thanks for sharing this. Fusion to me is like when I learned Photoshop so long ago. Nothing is really _hard_ but it isn't exactly intuitive either what tools to use when. I've enjoyed all your videos for what you make but I've especially enjoyed when you take the time to work through your Fusion design process. Thanks again.
Important note: *ALWAYS* add fillets and chamfers *AFTER* all your sketching, extrusion, etc.. Fillets and chamfers should always be the last thing you add to your model. Otherwise Fusion gets angry and can throw errors if you try to change your model and there are fillets/chamfers in the middle of the timeline.
true
Thanks for having your 'assistant' turn on my lights too 😂😂😂...
Really love the Fusion 360 tutorial vids! I’ve learned a lot from these. TY
Very good video, I have learnt a little more as I have just started with Fusion 360 and my Bambu printer. I bought it to print deck fittings for my 1/10 scale model of a Venice water taxi and so far the drawing/design and printing is going well but always keen to learn more. Cheers Ian, New Zealand
So many good nuggets of information in here about fusion 360 workflow. Thank you!
That looks really nice James. Just one tip from me, you can switch your 3d mouse into a 2d mouse for sketches, I find it a lot easier to look straight on a sketch. I use one of the two custom buttons to switch from 3d to 2d.
Oh, that's cool. That would make things easier.
As a relative noobie to fusion 360, this is gold dust! Thank you 😊. Ive just designed my own, by using your excellent info... similar idea, but with a horizontal mounting bar, as its going into the edge of a 1" thick desktop.
I've been using fusion for about 4 years purely as a hobbyist, and you've taught me two things here that I wasn't aware of, the hole tool for screw sizes and with space for the bolt head!!, how have I missed that. And also extrude from body, that will save me extruding 100mm then cutting 95mm !
Thank you!
Thank you James, for another outstanding video. Your instructional style is excellent-Thank you✅👍
Thanks, I love your F360 videos, they really help me understand it better.
Thank you! I’ve been wanting to see your method and also which mice you like to use when in Fusion360. I learned a few things from your concise tutorial even tho I’ve been using it for 2 years.
Its a space mouse
Loving the making a point to help with dimension tip
Love this video. With a little more practice I was able to make my own version of the stand.
this was so informative. and perfect timing considering i've just designed a headphone hanger with much more rudimentary skills lol. upping the gameeeee
Greetings from Argentina, congratulations for the videos
Great tutorial! Learned a few new things to try. Thanks for sharing!
Loving the fusion content. Thanks!
I have seen other suggestions to get rid of the roughness, but you could also use adaptive layer heights to resolve that.
Thank you for mentioning the shortcut keys for each step
Nice tutorial. I love these short ~ 15 min. tutorials. Even with my almost 20 years of CAD experience with different packages, there are always some of this little things that I pick up while watching them 👍
Putting the holes in before applying the fillets is one option but having too much geometry may interfere with putting on more complex fillets. Putting the holes in before applying the large fillet on the top would most likely have limited the size of the fillet.
13:33 the printer names are phenomenal lol. I did a double-take and rewound
This was fantastic, some great tip and tricks here
Alright but I really want one of these videos for when you make those massive assemblies. All the behind the scenes design choices and all that jazz.
James, when you are not busy we must get together and do a Vulcan Mind Mold, so I can obtain your CAD and Engineering knowledge. I'm a 65-year-old electronics tech(ret) and would love to do high-tech engineering stuff like you do. I was born too soon. Keep up the great videos I really enjoy them.🔫
Get rid of that seam, when ther is no need for it by disabeling (Z hob) "retract when layer change" in Printer settings under Extruder.
You'll only have seams that make sense from there on.. switching between models for example
Cheers and thank you for the spot on tutorial!
Wow i love these videos .. I learned a lot! Thank you and keep them coming please 😊
that bambulab mouse design is soo good. just printed it too ❤
I, a FreeCAD user, almost shed tears watching all those fillets actually work.
Looking good, James. I would probably use a contrasting color for the hanger just so it is visible enough that you won’t miss it when placing the headphones in their home, but since this is a daily use for you after a week you probably won’t even look at it when storing/retrieving the headphones.
I picked up a couple little tricks, much appreciated!
Nice video! You did us dirty with that "Hey Google" command, though. 😀
working on a project that i could not figure out how to put some radiuses in to thanks for the insight.
Yes, Fillet function is your friend when you want smooth flowing transitions between faces like that.
Granted I'm sure you know this James but in case not, and for others who don't, you can do that same center to center trick without the bolts by using the ID blades of the calipers in the holes themselves, ID measure the hole, Zero calipers, then just measure outer edge to outer edge between the two holes with the ID blades.
Also what a lot people don't know is that this direct measurement trick only works correctly by itself if the two features are the same side (Same ID or OD depending on which way you do it).
With that said, there is a pretty simple way to still do it when they aren't the same diameter. Simply measure each diameter, extrapolate the radius of each and then add the two radiuses together and zero the calipers at that number, then you can measure the center to center just as you would.
Example, say that you have two round features, one 6mm and the other, say a 10mm. just add the radius of each (obviously 3 and 5 for this example) and open the calipers to that size and then zero them and measure just as you would
Yes, using the ID blades is possble, but I think that in this case that is not the easiest way to get the calipers in and handle them at the same time. On large flat parts I mostly prefer the bolt measurement because of this.
Thanks for the tangent chain tip! 👍🏼
Nicely explained as usual.
Already knew to do smooth edges but i learned everything else shortcuts dimensions fixing error while smooting
Thanks
Great trick on the center finding
Thank you! This gives me a little bit of extra context for what I'm trying to do. My plan is to design an ergonomic cyclic grip for use in helicopter simulation. However, I still feel like I might have to start with clay and a 3D scanner to get a shape that feels good to hold. Hmm!
More Fusion 360 Videos Please! Excellent Learning Video.
Great video. Try selecting G2 for the fillet type and you should get even smoother looking curves.
Thank you for this! Love this content!
thanks I love Fusion and I always learn something new from your videos on Fusion. Oh and thanks for saying "Hey Google" and setting my google home unit into a panic trying to turn on my lights lololol
Beyerdynamics, nice. I had a pair of those for my office.
Just want to thank you because I had no idea it highlighted the trouble area in red when trying to filet.
Nice to watch people design a functional part. Fusion (with the name change this is going to make searching a pain), is agonizing to get right, when you do.. its simple. But it take practice. And thats why its nice to watch someone finish a part, the build guitars are great as well.