Carpentry 101: Basics of Wood Framing with MattBangsWood [#1]
Вставка
- Опубліковано 10 тра 2024
- Do you want to learn how a basic wall is framed? What's in it and what exactly it does? In this video I run through everything a wall has in it, from bottom plate to top plates, cripples and studs. By the end of this video, you'll feel confident looking at a wall knowing exactly what it's got going on!
Like this video? Want more? Subscribe and click the bell icon for updates!
Ariat Boots Discount: ariat.dkkdet.net/c/2029241/69... for your 10% off.
BAD Workwear - Use code "MBW10" for discount!
badworkwear.com/
Want to follow me elsewhere?
-
Second Channel: MattBangsWood 2.0
/ @mbw
-
Instagram: @MattBangsWood
/ mattbangswood
-
Twitter: @MattBangsWood
/ mattbangswood
-
FaceBook: Mattbangswood
/ mattbangswood
-
E-mail:
MattBangsWoodManagement@gmail.com
#carpentry #framing #wood - Навчання та стиль
Great video. Some comments from someone who has built and followed building across the country. There are many things that are done differently on the west coast than in the rest of the country. In the beginning of this video, you mention that pressure treated lumber has slits cut in it. That only applies to fir and fir type lumbers. In most of the country, treated lumber is Southern Yellow Pine (SYP.) This material does not have slits because the SYP wood fibers accept the preservative treatments better than the firs.
On the west coast, headers and many beams are huge dimensioned lumbers. In most of the country, these items are built up of smaller dimensioned lumber. 6"x6" and larger dimensioned lumber is simply not available.
You show triple or more side and bottom cripples. Anywhere except the west coast, you typically see single and rarely see more than double cripples.
Most of the country frames with kiln dried lumber. Framing with green lumber is mostly unique to the west coast.
Outside the seismic affected west coast and wind affected coastal areas. Shear panels, strapping and clips or brackets and uplift brackets are foreign to people in most of the country.
Pinning this Roger, you nailed everything. So tough doing these videos as everyone has different requirements.
I'm an electrician, but I love watching yt journeyman so I can have an all encompassing knowledg. I have no problem helping others or making sure my work is making more work for them! Your a natural on camera teacher and I appreciate your videos. Also to the OP, ty for clearing that up, being informative and not being an asshole doing it 👌 I've always wondered why alot of the wood I buy is stamped syp. Are tremors considered bucks? I know we all have different terms and my framing neighbor here in Florida calls those bucks I believe. Thanks to you both!
Yeah I can confirm as a Iowa guy that builds pole barns and home remodeling additions. Don't have to build like we having a hurricane or earthquake
@lilcreaper007 are there requirements related to tornadoes?
I teach a Construction Trades class at the local high school and this is one of the best series I have ever found on youtube. The kids I teach are 15 to 19 and you are 100% relatable to them and explain things in a way that makes sense and is easy to understand. Much appreciated.
I’m a young 20 year old currently working for a sub contractor in construction, work any ideas to get on to a more stable company that dose work like this , iv done Pier and beam foundation repair , painting, little bit of framing, Sheetrock at well and demos. I love in Dallas Texas if you know any company’s plz fill free to share
I wish I’ve taken this class when i was in high school 😂. I might as well go to trade school because i feel like carpentry is a great job to use my creativity and strength.
@@afro__g5217 That's where I'm at man. Let's get it.
50+ y.o. Network Engineer with Concrete foundation experience in my youth, and you just explained basic framing with some excellent tips in an easy to understand way to me. Putting up a 16x24' shed this Spring 2x6, and this should be perfect for me.
@@NotEnoughChaise I know this is not ideal but if you know any construction sites near you I would just drive up and talk to the foreman It worked for me also if one person says no don’t give up I get offered jobs by different trades all the time
Imagine having teachers in school like this dude! I think a lot of kids would've enjoyed school more.
They did have this in the 50s up to the 70s. Everyone had an opportunity to go I to trade
So many teachers nowadays have become lazy. It's easy to know which ones are incompetent when they ask for PowerPoint presentations. They'd rather "grade" presentations than actually teach.
My dad had a class like this in high school in the 60’s. They actually built a new building that I attended when I got to high school.
@@misticechoes5889The best way to learn is to do, you can only learn so much from someone telling you how to do it. A PowerPoint presentation requires you to study a subject and learn about it, growing your knowledge and experience with said subject.
As a former teacher, I must say, you have excellent delivery and presentation.
I didn't get a chance to reply to this.. I appreciate this a lot. While I love building, I want to teach. Hoping to make that a reality soon!
Minus the sunglasses..
@@MattBangsWood As a current Building Trades teacher, I really appreciate your excellent delivery. I plan to use this video in September as we will still be in remote delivery. If you are interested, DM me and I would love to have you live for the guys, they would think that was pretty cool. I do recommend that you build for a while before becoming a teacher, we don't make as much money as you do building, but the upside is you get to be inside when it is cold and rainy, and I get the kids to do all the heavy lifting.
Great job Matt!
The jump cuts edited it can help with that
i highly agree.
As a beginning DIY'er, I must say I've seen DOZENS of videos on framing a house/garage. ALL of them, except this one, just spit out '16" center' and a bunch of 'I'm a contractor' terms. I thank you for DETAIL on not only what I need but why I need it... Been watching videos for WEEKS and FINALLY found what I was looking for.. I don't like videos but this one is getting one.
As someone who has learning disorders and who has failed in both public schooling and college, your explanations and presentation have made understanding this much easier and simple.
Thanks
Means the world to me man..
If it makes you feel any better, I am close to finishing up my B. Sc. in Biochemistry and this video felt kind of complex and hard for me to understand; and so I’ve had to re-watch it a few times in order to understand things better. Everyone learns in different ways and we all have our own strengths and weaknesses in both knowledge and skill-set. I hope that you don’t put yourself down or think that you’re “stupid” because of your perceived shortcomings with school. I can tell you with utmost certainty that having a degree doesn’t make someone “smart”, and the lack of a degree, doesn’t make someone “dumb”. I hope you have a great day.
😊
Dude, best video you've made to date. I've watched most of your videos and in this one you answered some extra questions I've had that you didn't touch on in previous vids.
40 years old, retiring from the military, and have always had an interest in carpentry. Starting school for it in January. Decided I should watch some vids now and learn what I can beforehand. This is the first video I’ve watched in my self imposed prerequisite phase and something tells me I don’t think I could’ve come across any better content. Thank you.
I appreciate you taking the time to put this together. Stay clean, bang on!
Glad you opened with that disclaimer about the many, many different names for the same thing and I was surprised when it varied from site to site in the same area as well
I’ve watched a tonne of framing videos on UA-cam to learn how it all goes together (purely out of idle curiosity). Your video is by far the clearest and most logically explained with excellent pace and delivery. Top job, keep it up, I will be subscribing to see what else you put out.
You are a legend, thank you! The best Wood Framing introduction I've watched on UA-cam. Thank you for taking the time to make this video!
I would be interested in hearing about building codes. I know it varies from state-to-state County to County just your basics codes on building material, electrical and so on. I enjoy your videos.
look up "IRC building code" on google
No
I am a licensed plumbing contractor since 1988. I am truly impressed with this young man's
Knowledge, attitude,and delivery,
He "gets it!
Yes, more basic rough framing videos please. Thank you for your thorough instructor type teaching. Your methods are clearly understood.
Wow! Very impressed on how you explain things. I'm a nurse, but have always had a passion for carpentry. It's great when I run across people who are thorough yet still know how to keep it simple to understand! Looking forward to watching the rest of your videos!
You're so good at explaining this in a way that I internalize it. Thank you!
I am just starting out in a pre-apprenticeship prior to my apprenticeship and you helped me so much just getting to know the basics and understanding what I'm getting into! Thank you for making this video
Very simple. Direct information. No extra, to the point. But very important information. Love it.
I do hardwood flooring for the living but I always loved framing and watching building come to life. I framed my entire house it was a lot of fun.
Hello Matt, appreciate these videos for newbies like me who will eventually put up a few non-bearing interior walls.
wow! What a great way of sharing your knowledge with the world. You are very knowledgeable and do a great job at not getting too technical for the newbies at building. Great job!
Beautiful and clear in everything you explains . Facts and expectations are easy understand. Bravo . Thank you.
One of the best 17 minutes i've been on YT all year. I'm in insurance and this was critical information for me to learn. What was most helpful was hearing the names of specific building components and where weight of the building is shared. Many thanks. I'm subscribed.
Matt, Thanks. I've been watching all your video's closely over the last few months. I've managed to successfully construct my own garage over here in the UK using your techniques. Small in comparison (8.2m x 5.2m) to the ones over in the states but in the UK it's considered to be a big garage but yeah. I can't thank you enough mate. Clear, constructive, precise and straight to the point. Nailed it!
Great job executing the context and very effectively and swiftly said.
Easy to understand, thank you for the breakdown
I don't know shit about carpentry, or anything related to construction but I absolutely love this channel and how clear and concise the presentation is.
Fantastic work, now I'm hooked.
Hey Matt, I’ve been a plumber for 10 years and now I’m getting into framing. I’ve watched most of your videos and they really helped me get started. Thanks so much man!
I agree with Jenn Willis. Your delivery and presentation is awesome.
i agree with nicole mccoy, she agrees with jenn willis that his delivery and presentation is awesome
I just started a framing job 2 weeks ago and it’s all brand new to me. So this kind of content is unmatched in its helpfulness! Please make more beginner/tutorial videos for those just coming into the industry.
Thank you for everything you do bro! Stay awesome!
I was thinking the same thing. i just started my 2nd building project and im literally watching and consuming content online as much as possible. Videos like this are very helpful
Same.6 months and I'm just grasping things now
I love the "keep it simple" in your video combined with the thoroughness.
Thanks for uploading such an educational video. Your instruction is very clear and addresses the point without ambiguity. I believe you are a good teacher. Keep good work up and be safe at this pandemic period because we need people just like you in our community for the right reason. Once again thank you wholeheartedly!
Looked at a number of construction videos on YT and so far this channel is the best in terms of educational content of framing. No other channel really goes into the why as much as this video. Had no idea how and why the bottom plate was chemically treated.
I’m no carpenter, don’t know I ended up here but wow this was very clear and informative. Exceptional presentation, thank you very much. Makes me want to build something now lol
Jay Hahahaha yea
First, of your videos that I watch. Your speech, pace, rationale, and way of explaining while leaving "preference" as an option is amazing. Subscribed!
amazing educational video. Thank you!
Matt, honestly, watched you from barely any subs, loved how you explain things to the common man. I build furniture for a living and when clients ask about the process, I try to remember they have probably very little knowledge of what exactly goes into the final product. To see you at the subs you're at now. Love it! You deserve it mate, keep up the good work. Blessings
You did an amazing job delivering the message. Most people say the word "actually" a million times when it's not necessary. After a while it gets old and kills the "actual" message. See, it's not needed. Great job and thanks for the information.
Hey Matt, I'm a carpenter stuck at home near Boston. I finished binge watching all of the crazy framers videos and you're next. The way you explain the details is awesome, thanks dude. I like how you do the ceiling backing so that the drywall is all in plane with the trusses. Bang on 🤙
What an awesome video. I have been looking at framing videos for the past 4days trying to understand what are the most appropriate and functional options for the project I have in my barn, as a professional coach, I loved the attention to detail and the explanation of the why and where. I have never commented on a video before . I have looked at many of your videos for inspiration, but this one surpasses the lot, thank you karl
Awesome. Starting my third year as an electrical apprentice (tomorrow actually) and a lot of this I've learned just from working on new work residential. Crazy how much you pick up just from looking at the framing and having to understand how to work around it. Part of me still wishes I could've gotten into carpentry full-time, but alas. Still love what I do regardless.
And much respect for your particular blocking setup. Can't tell you how many times I've had to knock blocking out that was all placed most likely at 48".
Glad I took the time to watch this. Filled in some more knowledge gaps for me. Always looking to understand all the trades better.
Man you do such a great job of explaining things! And this is coming from a professor!
Great video! Helped learn a a lot for my job
I am just starting to work as an estimator for a General Contractor so i appreciate it all of you guys sharing your knowledge so unselfishly. Thank you.
I love how he says everything is called different names in different parts of the country I know all about this. Great video Man just giving info out to 99% of home owners still won't understand lol. Just laid out and framed the exterior walls of a big one this week. The home owners came out and tried lol helping with window placement and doors but they really don't understand measurements and actual space and alot of engineers don't think ahead about even their bed width. Thank God we were there to help them out because they would have had a mess nice video bro
being a structural engineer in training myself, I have gotten good at summarizing the purpose of my job. A structural engineers job is to use applied physics and material science to transfer loads from the roof and floors down in to the ground. 90% of my job is determining how to get roof and floors loads (in my area, that would include snow) down into the soil. The last 10% is sizing those structural pieces to do so without breaking. Great video!
What also might help you better understand your job is find a "residential crew" or "commercial contractor" to work with ( depending upon which field you are going in) between semesters???
Might help give you a better understanding of how particular materials work in "real world".
For me, I have just always learned more "hands on" than in a "class room".
I understand, everyone is different, and was just trying to make a helpful suggestion is all.
Also trying to translate whatever crazy ass design the architect made into an actual plan
Being an EIT is an exciting time with a lot to learn... Did you notice the errors in the design and construction in the foreground at that @14:57 timestamp? The shearwall boundary elements (6x6) should be continuous king posts, not broken and used as a trimmer. The correct construction would have been 6x6 king posts and 1-2x6 trimmer. This occurs at both of those walls. I see this error a lot, contractors see the big post callouts and assume they are there to support the header load, they are usually not. Because the 6x6's are broken, the single 2x6 king stud is inadequate to distribute out of plane wall forces from the garage wall to the roof diaphragm and the foundation, there should be 2-2x6 KS's there... Also, as a design error from the engineer, there is no way those either of those two shearwalls meet the 3.5:1 aspect ratio limit, so neither of them is code compliant. Those wall piers could have been strong walls, or the load should have been dragged somewhere else. All nitpicking aside, this framing is exceptionally clean, you'll rarely find anything done this good in the field.
You teach and explain well. Much props to all your teachers. And thank you for your knowledge.
Wow! Thank you so much for spending the time and energy to create this video to teach people like me the basics of framing!
I was installing drywall in a house (a Lindal Home design) in Grand Valley, Ontario, Canada years ago but there was no General Contractor (GC) and the framers didn't provide nail/screw surfaces for drywall everywhere. They didn't block any walls and the framing had dried and the 2" x 4" partition walls were bowed out so much the boards would rock. We ended up reframing some walls and shimming several others. The framers left a bunch of cut-off 2" x 6" pieces in the walk-out basement and I wanted to get rid of their waste so I cut pieces to length and nailed them between the perimeter wall studs at 3-1/2' and 5-1/2' above the concrete floor. It took most of the day but two days afterwards the owner's insurance agent came by to look at the house and was taking photographs in the basement. I asked if something was wrong and he said, "No, quite the opposite. Who's idea was it to install the blocking in the perimeter walls because it's not shown or noted on the drawings." I explained and he said he wished every house had this as it slows the rate of vertical flame spread and then he said he took photos to prove it so they can reduce the rate of insurance. He suggested we photograph it as well and provide pictures for the owner.
Cool! Let's hope it never gets proven though!
As always, very informative and professional. You are awesome Matt. Thank you for all that you do.
Really enjoyed your time you spent with us. I appreciated very much. Thank you kindly.
This is the first video I've ever watched on construction and I feel like I'm ready to build my first home. If only material costs were low enough that I could build a few practice houses first :D
next video some basic building codes would be cool or what type of hangars , great video well explain keep it up 👍🏽👍🏽👍🏽
Thank you - to the point, informative, not a second wasted!
so helpful! Thank you!
As an aspiring framer, I absolutely love this video! Great job dude!
Nobody cares
@@rltw2753you do
You are a reincarnation of the Great (Larry Haun) I'am constantly re-watching his videos on UA-cam to learn his Mindset, Approach, Technique, Attention to detail and CLEAR as possible explanation of everything beginner basic to Advance level tip's & trick's to make learning and doing carpentry more like a job/passion you can love for life with each project your asked to do or want to create.
I must say you look young in age but are very mature and wise in the way you approach the work like the wisest veterans of the carpentry industry world. Keep swinging the hammer and hitting nails on the head for as long as your body will allow you too. I don't know for sure if that's what Larry Haun was doing until his last day's on earth? But I have to Imagine that's what he wanted to do because he really looked like he loved the work, Same as you.. Bang on Matt. I'm a big fan, and Think you will go very far on youtube and everything else you do in life if you keep this path.
Never take a desk job the Industry needs people like you.
Nicely done Matt! Carpentry education the right way, I send all apprentices that work with me to your site to educate them in production and efficiency, always a good thing when watching your videos keep up the good work and be safe brother.
I can’t find a word to say how much your videos had help me...so thank you
Yes. By chance ive never seen anything youve made. Just saw you now. Subbed, sheeesh!
Matt have you ever considered stuffing insulation into your channel when you build it to avoid hot or cold spots in your walls. Where I live in the northeast our climate has extreme temp swings and our walls can use what ever extra help we can give them. Thanks for another great video it should help many beginners and diy folks.
@ulosefish His question is 100% fine.. Plans don't call for a California Corner, or a Channel. It's up to framers to do those things, not per plan.
As far as your question goes Jim, our channels do create a hot / cold spot in the wall, but with the weather in CA it isn't a problem at all.. If we were to go to another area, it would need to be done for sure! Stuffing the channels with insulation before putting them in makes for a much better product in colder / hotter climate.
You are an incredible presenter!! You are precise and clear. Great job!!!!
Dont ever stop making vids like these man!!!!!!
Hey Matt great job I hope your family is doing well during these times and keeping busy stay safe! Also keep up the educational videos I’m planning on getting Into carpenters union here soon just been practicing and doing what I need to your videos helped out a lot ! If it wouldn’t hurt could you do a few videos with formulas and math that we use in carpentry to help teach people that would be awesome !!!!
I hear ya I became the lead carpenter after they fired everyone else and I’ve only been working there 6 weeks, and I have to do all my measurements in fucking millimeters ,i live in the southwest of America for fucks sake
Would love to see a video of planning, quoting and reviewing a job before you get on site. Looking through drawings/details, ordering materials, quoting the job, estimating man power hours, etc.
Check out his How To playlist there is a few in there like that
first time home buyer here! i’ve always been curious on what everything’s purpose was when walking through the new builds and what i’m supposed to be looking out for in my own build along the process. This definitely helped me to understand what all is going on. Thank you!
Thanks man, I really appreciate your videos. I'm a recent grad and due to Covid I've been working remotely. These videos make it really easy for me to visualize what's on plan.
On the side note, more often than not structural elements are designed so that they are stiff enough to allow for proper operation of doors, windows, etc and reduce vibrations for human comfort. (Hence the massive sizes some times)
Looks like a great video for beginners! Wondering what you do for insulation at your exterior partitions. We usually make a corner post to go where you put your channel. That way we can still get insulation through the whole wall.
yes,its what we call california corner
Great video. Can we get a video about floor layout. Things like when laying out diffrent type of doors and how much inches to add when laying out.
Yeah man, have you done one yet specifically about for chalk layout for exterior/interior walls? Great videos!
Also about squaring up the the building before snapping lines and putting down mud sill?
Awesome video man! So great. Came back to this one for a second time for a quick refresh.
Thank you very much for this great video! I have been searching all over the internet for this information and finally found it here.
My wife and I are building our own house and are very appreciative of the way you take your trade seriously and try and help others without making them feel stupid, we all have to be taught and learn. Thanks
You are talented. Clearly explained. Can you tell something about nails? Sizes and naming? Thank you.
16 penny (3inch) used for nailing lumber, 8 penny (2 inches?) used for nailing sheathing, 8 penny ring shank used to nail your floor sheathing
Thank you for sharing your knowledge with us in an informative well presented manner.
Excellent Breakdown of Framing!!!
Thank you!!!
Really awesome video. I must admit though it is pretty overwhelming, everything you have to know, have to be pretty smart or takes a long time to learn all this stuff I would assume.
I won't lie, I knew NOTHING about framing or building anything until about 6 weeks ago. Nothing! After watching several videos from guys like this guy, I decided to build a shed in my backyard. I ended up buying all the tools required (which I went a little overboard) and am done framing and currently putting up my roof rafters. It's no intimidating if you just make a plan, no matter the size of project, and go step by step. Let these experts show you online. There are thousands and thousands of these types of videos. Give whatever it is you want to build a try!
@@johnjacobs3601 You said it John! It's gotta be a blend of watching great videos like this one IN COMBINATION with actually building stuff. How you feeling about the shed progress?
@@bmfitzgerald3 it's near the end, but has been for almost 2 weeks. The Arizona heat is already so brutal that if I don't get started early enough, I have no desire to be out there. Got really motivated when temporarily laid off of work due to covid-19 by knocking out about 80% of the shed, but now that work's fired back up, this project has been pushed to the backburner. If not for videos like these, I never would have finished what I've already done. There's no way. UA-cam University! Haha. I'm 42 yrs old, by the way.
In TN the plate on the very top is called a crown plate. The stud that attaches to the king is called a jack stud. Interesting to hear the different terminology... Keep on banging !
same in the UK and blocking is called "noggin's", don't ask why I have no idea. They use the same terminology in Australia and New Zealand
You sir are an excellent Teacher!
wow...awesome video...I wish everyone on youtube was like you, simple, precise, and to the point...
As a garage door installer, I wish every garage was framed with a 6x6. It’s a pain in the ass when all I have is 1.5 inches of wood on the jambs
"This is a stud right here" me: smacks chest like any proper dad should.
LOL
This video was very informative. You helped me to understand the process more. Thank you for going step by step and explaining the process and why.
This was an excellent explanation of basic wood framing to someone (me) who is very green and embarking on home projects; no filler, just the facts, very informative video; thank you
(really late, I know) We always called the "trimmers" the "Jack Stud". So, you have the King stud and the Jack stud.
We call them a Cripple and king stud.....
Hey Matt, absolutely perfect video, very helpful, thx! I'd like to know more about lumber you use for framing, except for bottom plate are regular studs and top plates treated by any kind and any mean? Because in this video you said you generally use wet lumber for framing and I thought (until now :D) wood used for framing is AT LEAST dryed to some level of moisture content, let's say 12-16 %. So is it just wood taken from mill / lumber yard without any kind of treatment? Please talk basics about lumber commonly used for framing - what kind of lumber, how is it treated, common sizes etc.
Another thing I'd like to know is what are common layers for flooring in case of non-solid concrete deck (I mean when you build a house based on crawl space laying on pillars or perimeter concrete wall). Please talk about every layer including joists, sheating(s), insulation and how to prevent the floor from squeaking from the very bottom to the final layer of flooring, e.g. vynil floor. Thanks a lot, take care.
For framing it is typically Doug fir or a "#2 or better" for wall studs and top plates, the wood is not at 100% moisture content but it is nowhere near dry (~7-11%). The final moisture content of wood varies depending on the environment and the MC of air. If you have other questions feel free to ask.
@@rolly5457 Thank you for the reply. So we can say it's basically "raw" lumber, right? How about rotting or bugs? Isn't it a problem for untreated wood? Is the same kind of lumber used for joists, rafters, headers (except for extremely long ones that are man-made / engineered)?
I’m 15 wanting to get into this type of work and this video helped a lot thanks!
Great job explaining things. Still watching and learning.
Channels work great for interior walls, but I wouldn't recommend for exterior walls, creates a void in the exterior wall that insulators cant get to. Big problem when you build up north.
We instead use C corners for corners, and L partition backers where interior partitions intersect with exterior walls, making the L partition with a 2x6 backer gives you 1.5" on one side, and 2" on the other side of partition
I’ve been thinking about switching to that method.. Even though insulating isn’t an issue here, I see the beneficial reasoning.
@@MattBangsWood It's a really nice way to do exterior corners and make both your insulation team and drywall team happy. My framing experience being in Michigan going back to the 90's, we always (as far as I can remember) utilized the C corner method 😊
Didn't you already post this
I had 2 or 3 people say they couldn't hear in the last video... So I went out, bought a $215.00 lav microphone, drove back out to the jobsite, re-shot the whole thing again, re-edited and uploaded a brand new video. The quality level was much different on the last one.
You are a great teacher. Really good job delivering the information.
Thanks for the video, Matt! Very informative.
It’s a shame you have to address potential foolishness, from the start. Great job young man keep on trucking you’ll be fine.
We're on UA-cam.. I said it in the first 0:30 and it'll probably still happen, lol.
MattBangsWood awesome video Matt. I could not have explained framing any better.
Good explanations. But you don’t do advanced framing to improve insulation values? The one area I noticed that is when you were discussing an interior wall meeting an exterior wall and you did the box framing to provide drywall backing. I’ve been a Drywaller for over 35 years and that’s how it used to be done and still is in many areas, but I’m planning on building a large home for myself this summer and want to do the advanced framing methods where you get more insulation in some headers, and in that backing area. You basically turn your backing sideways so that insulation can fit in there and you don’t end up with a dead air space.
I was just sitting here watching how other people do things while I rest so I’m basically Just curious. Good videos though
A California Corner is i think what you are thinking of. He had another video doing this, in his How To: Frame a 16" O.C. Wall! (Most Common Wood Framing Method)
Thanks for your videos man, super informative and anyone that has been on a construction site can follow pretty easy. Great job explaining the steps
best framing video I've seen so far. Thank you!!!
Corners of a house :
“Shouldn’t the corners, of every point in a home, be reinforced stronger?”
First for once
Excellent presentation. Very informative. Thank you!
Finally someone coherently speaks about framing. Thanks.
Want to play a drinking game? Take a drink every time I say the word "material", how long will you last?
A video similar to this was uploaded last week, a lot of people had a hard time hearing it.. I shot it on a GoPro, due to lack of time. I archived that video, went out and bought a $215.00 lav microphone and shot this on my Sony A7SII. I want everyone to be able to utilize these videos as a learning experience, seeing that some couldn't wasn't right, so I recreated this.
Subscribe to my second channel! Videos going up weekly.
ua-cam.com/users/mattpanella
BANG ON!
MattBangsWood Its going to be my last year in highschool and im trying to be in the construction industry you recommend me to go to a tech school for 2 years or just start working right away
Ok just saying
MattBangsWood The sole plate does not have to be pressure treated as long as you have a seal sealer between the concrete and the bottom plate/mud plate/soleplate
Not much drinking going on here.. I only got to drink 6 times.. 5 times rapidly in start of video and 1 time towards the end of video. Stay safe Matt. I know we are here. 🍺👍🏻
Am rafeeq from India I nid jobs am carpantar I have worked Qatar .com Laughton after Saudi .com saudiojar am entrast my mobill n.9871429270