Probably going to be drowned by all the other comments, but for all my metric friends out there, I've converted the steps in metric and added some information. All the numbers are in cm. I've also included and approximate numbers of BBs you'll need. 1) Make the handle how you'd like. First length of paracord will be 243.84 in front of the handle and 60.96 behind the handle. 2) Second length will be 198.12 3) Third length will be 177.8. You'll need two of this length. ~445 BBs. 4) Fourth length will be 157.48 5) Fifth length will be 137.16 6) Sixth length will be 116.84. You'll need two of this length. ~292 BBs. 7) Seventh will be 96.52. 8) Eight will be 76.2. 9) Ninth will be 55.88. You'll need two of this length. ~140 BBs. 10) Last will be 35.56. For ball bearings, you'll need approximately 880 4mm bearing. From what I see, your best bet will be steel ball bearing if you can't get your hands on BBs. Total length of paracord needed ~17-18m.
For everyone who doesn't really want to watch the whole vid Para cord bullwhip Three quarter inch PVC One inch PVC 30m para cord BB's KT tape Electrical tape 1.Cut the 3/4 inch PVC to nine inches 2.Cut the 1 inch PVC to 1 inch 3.First piece of para cord 8 feet long (8feet in front of handle 2feet behind) 4.Use electrical tape to mark where the bottom of the handle is 5.And 18 inches from the end of the para cord (the fall of the whip) 6.Cut nine more pieces of para cord of diminishig lengths 7.First piece of para cord must go from the first tape mark to the second 8.After that each piece must diminish by 8 inches every time 9.Cut three more pieces of the same length as the 3rd largest;6th largest and 9th largest piece of para cord 10.Fill those with BB's 11.Close the one end off by melting it 12.Take a drill bit a bit bigger than the BB bullet, and stick that in the para cord once you've gutted it, the melt it so it stays open permanently. 13.every foot and a half tape it with para cord once the rope is taped into the handle, After that rap it with KT tape and then your bullwhip is complete!
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this: 1. Don't bother with the longest BB strand- it makes the whip too heavy 2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip 3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well) 5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways. 6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Does anyone realize that the fact that Nate is here allows Grant to do bigger projects and we still get regular videos? And he’s not doing a bad job either
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this: 1. Don't bother with the longest BB strand- it makes the whip too heavy 2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip 3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well) 5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways. 6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Hassan DM that's not the way to take care of bullies bring it to an adult when I was younger I tried bringing it into my own hands and it didn't help just let an adult know
Jose Lopez ive been here for a year and a half and ill tell you right now, i didnt realize most of this channel's community was close minded fools who cant grow up and accept change
Haha hi nate! Just want to say well done, you have improved a lot since your first video with Grant:) now you are much more comfortable with the camera and even have your own special style and touch to your video! Keep up the gd work and God bless:))
Any time you need an aglet on paracord take an old antenna from a radio, put in about 1/2" of paracord into the antenna and just heat up the antenna. Instant aglet and you can make shoe laces that way as well
Fun fact: The bullwhip is incredibly strong because of the mass. As you see, bullwhips become thinner and thinner and because of that kinetic energy has to become more packed and more concentrated. Meaning more velocity (literally just speed) and that means even more FORCE. That's why it says cracka-lacka as it breaks the sound barrier-
Thanks for teaching me a cheap and cost effective way to disipline the children in my basement. Follow up: Works well has a nice crack to it no more trying to run to the landline phone they listen to me now and follow orders well great vid 10/10 would try again.
An Important Consideration!!! If you're going to make this (and boy do I want to, wow, it looks fun), please don't start cracking it until you've spoken to your immediate neighbors about the noise it will make. Discuss times during the day/week where the excess cracking and sonic booms will NOT be a bother. If you cannot find a time where your local neighbors are not bothered by it (maybe they're sensitive to noise for medical reasons), PLEASE go somewhere secluded to avoid hurting others with the noise. Be mindful of infants as well, as repeated sonic damage like these sounds could do more damage to their hearing than an adult, as an infant's hearing is still VERY sensitive.
Get a thin straw and put bbs in the straw end then get a stick smaller then the straw and push the bbs in with the straw being big enough to fit in the paracord
True - Letters 壊れた {LDR} Wouldn’t he be less likely to hurt himself if he had the ability to use his fine motor skills easily, therefore having more control?
You'll end up adding a few strands. You want the whip to start tapering at about 2 feet from the handle. So if you do what they did and drop strands every 8 inches then you'll need to add strands. 1 for every 8 inches
this is a whip, a cat o' nine tails is a flail and would not need the taper, that it would also be braided with shards of metal in it, basically altogether a totally different build.
You know I don’t build this stuff that he makes, does anyone actually follow these how too? I just watch them because it’s cool to watch him build something.
I didn't tell you how long it is or how many you need. 550 is the name of the paracord as it can with stand up to 550 pounds before it breaks and 7 strands inside the paracord is the indication of Military grade paracord as the will be consumer grade one out there that doesn't have the 7 strands on the inside of the paracord.
Probably going to be drowned by all the other comments, but for all my metric friends out there, I've converted the steps in metric and added some information. All the numbers are in cm. I've also included and approximate numbers of BBs you'll need.
1) Make the handle how you'd like. First length of paracord will be 243.84 in front of the handle and 60.96 behind the handle.
2) Second length will be 198.12
3) Third length will be 177.8. You'll need two of this length. ~445 BBs.
4) Fourth length will be 157.48
5) Fifth length will be 137.16
6) Sixth length will be 116.84. You'll need two of this length. ~292 BBs.
7) Seventh will be 96.52.
8) Eight will be 76.2.
9) Ninth will be 55.88. You'll need two of this length. ~140 BBs.
10) Last will be 35.56.
For ball bearings, you'll need approximately 880 4mm bearing. From what I see, your best bet will be steel ball bearing if you can't get your hands on BBs. Total length of paracord needed ~17-18m.
testing2488 O
I threw u a life preserver cause u said u were drowning :)
Thanks mate!
Lol np man anytime!! : D
This is exactly what i needed, thanks a lot :3
This might be the first thing from this channel I'm going to make.
Potato, Potato me too
Oh hello my loyal potato servent
You should watch his blowgun
I have made blowguns long before this channel was a thing.
I'm not making any of these
Always blows my mind every time i hear the speed it moves and the fact that it breaks the sound barrier
Look up slowmo guys filming the shockwaves.
For everyone who doesn't really want to watch the whole vid
Para cord bullwhip
Three quarter inch PVC
One inch PVC
30m para cord
BB's
KT tape
Electrical tape
1.Cut the 3/4 inch PVC to nine inches
2.Cut the 1 inch PVC to 1 inch
3.First piece of para cord 8 feet long (8feet in front of handle 2feet behind)
4.Use electrical tape to mark where the bottom of the handle is
5.And 18 inches from the end of the para cord (the fall of the whip)
6.Cut nine more pieces of para cord of diminishig lengths
7.First piece of para cord must go from the first tape mark to the second
8.After that each piece must diminish by 8 inches every time
9.Cut three more pieces of the same length as the 3rd largest;6th largest and 9th largest piece of para cord
10.Fill those with BB's
11.Close the one end off by melting it
12.Take a drill bit a bit bigger than the BB bullet, and stick that in the para cord once you've gutted it, the melt it so it stays open permanently.
13.every foot and a half tape it with para cord once the rope is taped into the handle,
After that rap it with KT tape and then your bullwhip is complete!
Bradley Whitburn but its not kt tape
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this:
1. Don't bother with the longest BB strand- it makes the whip too heavy
2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip
3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well)
5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways.
6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Jalen Johnson what a legend
The video is only 11 minutes and it takes more time than that to make the whip
Nathan Meadows what?
Does anyone realize that the fact that Nate is here allows Grant to do bigger projects and we still get regular videos? And he’s not doing a bad job either
I just prefer Grant
Like that "bigger" project yesterday. seems legit.
He is doing a bad job.
I prefer grant too
@@neppynepne wow
Oh yes so this got recommended when i clicked on a guy with a jacket whipping a big chain
YOOOOOO SAME
Same here. Many people got the same recommendations lol
Wow so its not just me
Same
SAME
wow-probably the third thing im actually going to make it was actually really cool
EWIN GAMING huu
*Stewies voice* : Cool whip!
Cul khwip
Why are you putting so much emphasis on the “H”?
hwip
Why are you saying it like that?
Saying hwat like hwat?
This guy needs his own channel. “The Prince of Random”.
I wonder how many black gloves do they go through?
Random Stuff alot
Seven
e^x
All of them
Dire Wolf *a lot*
i like both nate and grant because they both are doing hardwork
Having personally made 4 nearly identical copies of this whip and have a fairly small, but diverse collection of whips. From experience, here are some recommendations if you want to make your own, for anyone who ends up seeing this:
1. Don't bother with the longest BB strand- it makes the whip too heavy
2. Take about a 3ft strand and wrap it around the base of all the strands, then tuck it inside the PVC piping- it goes a long way towards making the whip last long term. It is also recommended to connect it as you would with the longest core strand by wrapping it around the very butt of the whip
3. Use quite a bit, but not too much, heavy duty tape when you are connecting the rope to the PVC. Too much will make that section inflexible and it will not crack properly (about 4 reversing, fairly loose wraps of duct tape worked well)
5. For a beginner, i recommend actually using a shorter whip- around 6 feet is plenty, and is actually closer to what is used in competitions anyways.
6. Be careful. Choose a low traffic area, such as in your backyard, and mark off a spot where you have at least three feet more than your overall whip length in every direction. Even behind and above you. Trust me, its important.
Yes this is true i tried it without the longest strand and it saved so much time and still worked
You should include like how long it will take to make, so people can set aside some time
Josh Reck that. Would. Be. Perfect.
READ THIS GRANT^^^
Josh Reck 👍👍👍
Adam Winrich has a 15 min whip tutorial which is probably cheaper than this because paracord is pretty expensive
You can get 50 feet of para cord for like, $6.
I love that you upload so many videos at the time
but he doesnt
He has a video out every day for the last few weeks perhaps even months!
Sean nyyx thats what hes been doing with his channel since like two years ago
10:41 I totally thought you had caught your ear or neck with the fall during the swing.
5:24
“A little bit of tape”
*Buys 3M stock*
Josue Avalos I made that comment sorry I coped you
Awesome! I never make any of this stuff but I really enjoy watching it!
GAME HAZARD same!!
GAME HAZARD me too
I got 115 likes in 7 hours? Holy sh*t!
GAME HAZARD I made the balloon slingshot.
GAME HAZARD me to
I made one of these 2 years ago with my grandfather; nowadays it’s all patched up but I credit that whip to being what got me into whipcracking.
Can this bullwhip be used for self defense and offense?
There are some school bullies I wanna take care of.
Hassan DM that's not the way to take care of bullies bring it to an adult when I was younger I tried bringing it into my own hands and it didn't help just let an adult know
Lol militarism is a reason why you shouldn't do that
All you need is to listen to pumped up kicks.
Yes it can.
Just punch them in the mouth.
My favourite video by Nate so far tbh. Awesome project and just a great video overall!
Totally agree! Awesome project.
He had to put "like indiana jones" so it could be family friendly. Grant smart af🙏🙏🙏
OG what would he have put if it wasn’t family friendly?
MiroER GT slave owners
Grant is dead..
Bade Sky dang that just killed my mood
Platinum how kind of you to remind everyone...
Who else was hear before this guy came I like him and all but I like grant more
Jose Lopez I prefer grant but I still don't like this dude
Jose Lopez ive been here for a year and a half and ill tell you right now, i didnt realize most of this channel's community was close minded fools who cant grow up and accept change
I like grant too
Yeah
Where did grant go!!!!
Would like to see this whip used in super slow motion
Yeah, this is a Slow Mo Guys collab waiting to happen
The Nocturnal Alchemist watch myth buster
The Nocturnal Alchemist Yeah that would be awesome. The sound will be awesome as well.
Wassup dude?
its been done
“This is how to make a whip with paracord, bb’s, and a little bit of tape”
*ARE YOU SURE IT’S A LITTLE BIT?* xD love this channrl
For real tho
Haha hi nate! Just want to say well done, you have improved a lot since your first video with Grant:) now you are much more comfortable with the camera and even have your own special style and touch to your video! Keep up the gd work and God bless:))
I love how he uses the blowtorch to melt the string, not a simple lighter...
Jblueskull go big or go home and I right
And now melt the end of the paracord
*uses oxygen and acetylene torch*
Jblueskull h
and now to melt the end of the paracord.
*Flies to the sun*
and now melt the paracord.
*uses magnifying glass*
I didn't know you could melt Paracord...that's why I love this channel.
When the kids are acting up and you're just like "40 lashings for all of you!"
ben stewart that's morbed af
Funny. But scary
i hope my dad doesn't find this comment
This will be perfect for my plantation
Any time you need an aglet on paracord take an old antenna from a radio, put in about 1/2" of paracord into the antenna and just heat up the antenna. Instant aglet and you can make shoe laces that way as well
Fun fact: The bullwhip is incredibly strong because of the mass. As you see, bullwhips become thinner and thinner and because of that kinetic energy has to become more packed and more concentrated. Meaning more velocity (literally just speed) and that means even more FORCE. That's why it says cracka-lacka as it breaks the sound barrier-
This video sponsored by tape
Ryan A yep
Daisy brand BB's
A LOT of tape
& Patience
but mostly tape
Don’t listen to the haters mate you’re doing great
Now I’m gonna learn my kids who’s the boss
Grant, what happened to the draw my life idea
Raihan Islam what happened to Grant
He has no life
Raihan Islam I think he killed grant
It’s Nate!
Works so far took a whole day to fill the bbs but it's really cool once done
better starting today this project and hopefully it will be a great present for next years Christmas....
Quitonizee Can't stand the BBs part, huh?
did the line "where is grant" become a meme?
No
No but we're is he?
rick fire yes.
I made this at home and I was quite satisfied. The sound and the sting are delicious
Thanks for clarifying that Indiana Jones used a whip.
Should've painted the board black so we could see the cracks
Actually made this three times. Very clear instructions. Works amazingly
Sure ,
*I CAN MAKE THAT*
You could also use a funnel to fill it with bb's
Josh Pitt or you could use an airsoft speedloader
Josh Pitt lol
Thanks for teaching me a cheap and cost effective way to disipline the children in my basement.
Follow up: Works well has a nice crack to it no more trying to run to the landline phone they listen to me now and follow orders well great vid 10/10 would try again.
Make flash rope (Nitrated Fuse)
this is super cool
Thanks, my kids are gonna love it
An Important Consideration!!! If you're going to make this (and boy do I want to, wow, it looks fun), please don't start cracking it until you've spoken to your immediate neighbors about the noise it will make. Discuss times during the day/week where the excess cracking and sonic booms will NOT be a bother. If you cannot find a time where your local neighbors are not bothered by it (maybe they're sensitive to noise for medical reasons), PLEASE go somewhere secluded to avoid hurting others with the noise. Be mindful of infants as well, as repeated sonic damage like these sounds could do more damage to their hearing than an adult, as an infant's hearing is still VERY sensitive.
+Michael Hockey What’s wrong with you?
That last crack you were using is called the sidearm flick
That is actually called a clementine
Nate's doing awesome 👍
ZNA PRODUCTIONS ZNA PRODUCTIONS ZNA PRODUCTIONS
let me fix that for ya ( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)( T ʖ̯ T)ZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONSZNA PRODUCTIONS
Not even a remotely similar build.
Steve Zukley dude I was gonna comment the same thing!😂
TheTechnosasquatch I mean it’s the same concept but I think the one Eli made was better
Steve Zukley same
Please make bismuth crystals!
2 years and finally something i have all the materials for
9:01 is called punisment for attempting to escape
9:01 it’s called the dads belt
Get a thin straw and put bbs in the straw end then get a stick smaller then the straw and push the bbs in with the straw being big enough to fit in the paracord
Dude looks like he's held hostage.
How
Notice how they changed the channel name.
Echoify Grant Thomson| King Of Random
Aderp Hugler wasnt it changed along time ago?
Uh it was Grant Thompson- King of Random
About 1-2 months ago
Yes I did notice.
Months ago
Run one core rope off of a metal rod(to make the handle) and fill the bbs about a 3rd or soo, and do 3 layers of brades
Grant, How is your holiday???
I hope its amazing!
Has anyone actually tried this, it sounds like rocket science
Thanks, now i can have people working much more faster for me❤
Get rid of the gloves. You are only making it more difficult to use your fine motor skills.
Chuck Lynch he might hurt himself tho :\
True - Letters 壊れた {LDR} Wouldn’t he be less likely to hurt himself if he had the ability to use his fine motor skills easily, therefore having more control?
Last Man Gaming 101
Yes that is correct
You could have maybe used a BB speed loader to fill it quicker.
I love it. Made it from your video and the BB's were a pain in the butt.
Thanks, I'm now wearing a Adidas tracksuit to hide it when I go to school. only for once. I made mine a lot shorter. I only got to use it for a act.
You should make a fishing rod off of scrap
Paracord Bullwhip is an amazing punk band name
Wasuup Can you guys do homemade soda with the vacum or dry or liquid nitrogen
Melker Svensson grant has already done that.
Just what I needed 👴🏻
Idk why everyone' whining "where's Grant" all the time. This guy's great too - makes cool stuff.
If my mom see this... she wouldnt need wires anymore..
If I make a longer whip, should I still use the same number of strands and size difrences, or proportionally scale it up
Sidney Wateski most likely scale it
Probably both. If it gets too thick it wont work as easily.
Sidney Wateski idk
You'll end up adding a few strands. You want the whip to start tapering at about 2 feet from the handle. So if you do what they did and drop strands every 8 inches then you'll need to add strands. 1 for every 8 inches
once you throw in some of the brading styles the paracord is heavyer and you dont need the weight if your wrist strong enough
That whip move you cane up with is actually called the “Dafuq outta here”
I’d love to see you make a guitar
Your the squire of random, grant is the king
The views go down every week by thousands because grant doesn’t do the show anymore
No they don't you can't count
Can you make a Cat o' nine tails? Like put glass shards on it, and see what you can rip up?
this is a whip, a cat o' nine tails is a flail and would not need the taper, that it would also be braided with shards of metal in it, basically altogether a totally different build.
You know I don’t build this stuff that he makes, does anyone actually follow these how too? I just watch them because it’s cool to watch him build something.
Instead of saying let's decorate he should have said let's randomize
Grant looks different..
BassManBobBassCovers I think it’s the haircut.
Thats not grant... i hope you were being sarcastic
Tad Strange he is grant. He just have new haircut.
Rasmus H I really hope that you are being sarcastic
That’s note
If you go to the electrical isle you can get 6 feet of ball chain for a $1.30 - much easier then BB's.
What happens if you mix liquid nitrogen with kerosene after that does it light?
Realistic Gamer007 do you even English bro but in theory yes but might have a different reaction when you light it
Nitrogen is an inert agent. It wont make kerosene more flammable.
Haha im here 4 mins ago (earliest ive ever been
I spent hours braiding a whip from paracord.
2 bellies.
It barely cracks
This guy does it in no time.
Did you dip it in wax properly?
Can you heat slime to the point in which it is a gas?
That's just evaporating the water off which would leave all dry components you used in the slime in the container
karl malek no
Daniel Wyatt is right.
Daniel Wyatt and that would probably burn
Love the new guy
I am 14 years old and I made this whip without any assistance and it turned out great. Loud crack and is a simple project if you're patient
I would think a ball chain would be a lot less difficult instead of BBs
might affect with the flexability of the whip though
Make a gun that shoots flaming rubber chickens
Wtf lol
Wa xD wtf
Link Da Drummer YAS I LOVE IT!
Link Da Drummer Wait IT SHOULD BE KFC! HAHA
You are amazing
That's so cool I didn't think it would work but wow👏
Try colored flames
Brandon Collins This is done by mixing different types of salts.
Okay, I am kind of curious, where is Grant?
Tyler Joseph Schommer he’s on vacation
WAIT WHAT!!!!😨
Ded niga
Thanks, now I can use this at my cotton field
Sponsored by Croco Electrical Tape.. XD XD
Can you tell the paracord sizes and
its 550 paracord, Military grade with 7 stands on the inside.
BostonTricker not that I want to know how long is it and how many do we need
I didn't tell you how long it is or how many you need. 550 is the name of the paracord as it can with stand up to 550 pounds before it breaks and 7 strands inside the paracord is the indication of Military grade paracord as the will be consumer grade one out there that doesn't have the 7 strands on the inside of the paracord.
That Steveguy Cant OP listen?? It says it in the video.
Think Creative and helpful fun
*New* *Weapon* *Added* *To* *Your* *Inventory* !
Can u not use black rope with black tape wearing black gloves on a black table. Because u can’t see anything.
Unbox Amazement would you want me to write in white letters??
.
rekt
Dude, up your brightness