Alot of guys just run the 3 mounts, your the first person to tell of it ripping the chassis any suggestions on how/where the reinforcement should be done thanks
Kyle from boosted boys had a lot of issues with his red h22 swap civic. He tig welded some extra support plate on the driver's side engine mount. Is right where the mountain meets the chassis of the car
I've heard the k-series intake manifold with a upgraded intake it's pretty good I think you may need a plate in between the head and the intake manifold
Hey I’m doing a H swap in my Ek I have a 1996 prelude I’m taking the swap out of it’s all manual already have Almost all the parts what harness should I use I still have stock prelude harness it’s manual or do I need another one
Hello, i have problem with my h22 ek civic. The idle surge but i can't figure whats the problem. I have the same throttle body as you but i can't find my map sensor. Please help thanks
Could be a idle ear control valve. A cleaning will fix that. Or check to see if you have any vacuum leak coming from where your intake manifold bolts to the head
Alot of guys just run the 3 mounts, your the first person to tell of it ripping the chassis any suggestions on how/where the reinforcement should be done thanks
Kyle from boosted boys had a lot of issues with his red h22 swap civic. He tig welded some extra support plate on the driver's side engine mount. Is right where the mountain meets the chassis of the car
@@olderrol1968 thanks
You don't have reinforce your mount are add the traction bar mount. But I recommend I for a peace of mind.
@@olderrol1968 yeah I seen them, where exactly do you mount those on each side?
From what I've seen it usually cracks right at spot weld. Right we're the engine mount bracket meets the chassie.
💪💪💯
Can you please tell me what type of axle in spindle you used I have the same sit up.
I got this same set up, using an H transmission. Im looking to change that intake manifold. Do you know a good one without any fitment issues?
I've heard the k-series intake manifold with a upgraded intake it's pretty good I think you may need a plate in between the head and the intake manifold
Hey I’m doing a H swap in my Ek I have a 1996 prelude I’m taking the swap out of it’s all manual already have Almost all the parts what harness should I use I still have stock prelude harness it’s manual or do I need another one
I'm using the wireworx h22 to ek engine harness. Because I was not comfortable modifying the stockhorn.
Any other questions. Feel free to ask. I did the same exact swap. Because I already had a prelude that was running and driving
my engine is in obd1 and my civic in obd2a how to combine them?
The only issue you should have is the distributor connector. You may have to get an electrician to wiring the extra connector
💪💪💪
That H swap ek that you did on your channel. Have the axles been holding up well?
@@olderrol1968 unfortunately haven't had any time on the road or track due to covid shutting down cali but they held up great on the dyno!
Lol. My axles have been giving me hell. I'm going to try and upgrade some things and see if that works
Which T bracket did you use? Been browsing the forums and it’s been vague. Would like ati confirm before ordering. Thanks.
The stock one from the prelude
Hello, i have problem with my h22 ek civic. The idle surge but i can't figure whats the problem. I have the same throttle body as you but i can't find my map sensor. Please help thanks
Map sensor is on the back of the TB
Could be a idle ear control valve. A cleaning will fix that. Or check to see if you have any vacuum leak coming from where your intake manifold bolts to the head
@@olderrol1968 thanks it turned that i had a bad ecu. I switched and it works perfectly fine but check engine on..=/
That's normal to have small issues as your build progress.
What kind of traction bar is it?
It's been a few years but I think Innovative makes the front traction bar engine mount for EK swap
@@olderrol1968 thank you
Hey bro what axles did u use?
ua-cam.com/video/rUk9g0-qvFY/v-deo.html
So this is the same as the non vtec one as well?
What belt are you using
ua-cam.com/video/KPDppYUQv5E/v-deo.html. Here's the video
Yuh still a bill dat chargy? Mi go haffi pass and check it out
There is a revival of the h22 engine and transmission. EXSPECALY now with the ability to all wheel drive with the stock transmission.
@@olderrol1968 yea, I saw the kit. Haven't priced it out yet though.
I am piecing together a transmission now. With the hopes of in the future to go all wheel drive.sutup
Does the h22 require a shift linkage or cables?
Cable. If you're doing a full h22 swap.
Yuu Jamaican bro ?
Yes yes 🇯🇲 🇯🇲 🇯🇲. I love
@@olderrol1968 what axle was used (Jamaica 🇯🇲 )
ua-cam.com/video/rUk9g0-qvFY/v-deo.html.
What is the front braket u used for the traction bar mount
I needed the front traction bar engine mount to take some stress off the other engine mounts