PSA-Hinterachsen-Reparatur mit OPTIMAL Reparatur-Kits - Teil 1: 28 mm / PSA rear axle repair - 28 mm

Поділитися
Вставка
  • Опубліковано 9 лют 2025
  • PSA-Hinterachsen-Reparatur mit OPTIMAL Reparatur-Kits
    Defekte Hinterachsen kommen bei älteren Modellen des PSA-Konzerns einem Totalschaden gleich, denn der herstellerseitig empfohlene Austausch der Hinterachse ist meist zu kostspielig. Doch diese Zeiten gehören jetzt der Vergangenheit an. PSA Hinterachsen-Reparaturkits von OPTIMAL machen künftig eine effiziente und kostengünstige Instandsetzung möglich. Wir haben für den Ausbau von drei unterschiedlichen Innendurchmessern drei Videofilme produziert:
    1) PSA-Hinterachsen-Reparatur mit OPTIMAL Reparatur-Kits - Teil 1: 28 Millimeter
    2) PSA-Hinterachsen-Reparatur mit OPTIMAL Reparatur-Kits - Teil 2: 34 Millimeter
    3) PSA-Hinterachsen-Reparatur mit OPTIMAL Reparatur-Kits - Teil 3: 26 Millimeter
    Artikelnummer: G8-248; G8-277; G8-197
    PSA rear axle repair with OPTIMAL repair kits
    In the case of older PSA Group models, defective rear axles can mean a total write-off since the manufacturer's recommendation to exchange the rear axle is usually too expensive to implement. But this is now a thing of the past. PSA rear axle repair kits by OPTIMAL now make efficient and economical repair possible. We have produced three videos for three different inside diameters.
    1) PSA rear axle repair with OPTIMAL repair kits - part one: inside diameter 28 millimeters
    2) PSA rear axle repair with OPTIMAL repair kits - part two: inside diameters 34 millimeters
    3) PSA rear axle repair with OPTIMAL repair kits - part three: inside diameters 26 millimeters
    Reference-No.: G8-248; G8-277; G8-197

КОМЕНТАРІ •

  • @uss-digital4286
    @uss-digital4286 7 років тому +3

    Excelente el trabajo de esos mecánicos, lástima que estén tan lejos de donde vivo, ese si es un auténtico trabajo que renueva tu Peugeot

  • @oliveirasegantine3879
    @oliveirasegantine3879 5 місяців тому

    Trabalho incrível. Brasil não tem uma oficina assim.

  • @jandresmartinez3391
    @jandresmartinez3391 7 років тому +3

    increible la calidad de mano de obra de estos mecanicos impecable

  • @eltrobadorarielsoriasoria150
    @eltrobadorarielsoriasoria150 2 роки тому

    Excelente trabajo felicitaciones 👌

  • @ackiah1
    @ackiah1 5 років тому +3

    Hello!. Please tell me how to buy this tool in Brasil? Thaks.

  • @anthonyduv
    @anthonyduv 3 роки тому +1

    Good job
    Where Can I buy the tool that you put in the axle ?

  • @edsonraimundo9814
    @edsonraimundo9814 3 роки тому +1

    Onde posso comprar essa barra rosqueada (Ferramenta)?

  • @sanya.0007
    @sanya.0007 8 місяців тому

    Hello! Could you help me with the article number, based on which I can find the bridge fixing screw?

  • @dougsan
    @dougsan 3 роки тому +1

    Alguém conhece uma oficina no Brasil que faz um trabalho como esse?

  • @CosgroveNotts
    @CosgroveNotts 4 роки тому

    What's up with the axle tube?. Looks very serviceable to me..

  • @f_l3339
    @f_l3339 2 роки тому

    How can you tell which torsion bar belongs to which side (left or right)?

  • @marcelosandoval6382
    @marcelosandoval6382 2 роки тому

    Hola cómo se llama esa herramienta.la barra con rosca para sacar las pistas del eje?

  • @damicumengel
    @damicumengel 6 років тому +3

    Muy buen trabajo .. podrian por favor.compartir el nombre de la herramienta hidráulica q utilizan

    • @christiansarmiento6890
      @christiansarmiento6890 4 роки тому +3

      Porta power el la hidráulica que usan para extraer loque no loque encontrarte es el nombre de la barra que no la encontré por ningún lado acá en mi país pero si me fui a una bulonería compré una barra de rosca de 3/4 y me fabrique una y funciona joya

    • @juanmawildee
      @juanmawildee 4 роки тому +1

      Christian Sarmiento hola christian sos de argentina?

    • @juanmawildee
      @juanmawildee 4 роки тому

      Yo lo hice pero se me barre la varilla esta muy clavada. Que diametro usaste?

    • @christiansarmiento6890
      @christiansarmiento6890 4 роки тому

      @@juanmawildee yo compré una barra de 3/4

    • @juanmawildee
      @juanmawildee 4 роки тому

      Christian Sarmiento dale gracias, yo use 5/8 y no se la aguanta. Ahora la voy a hacer de 3/4 pero de acero 1045 y a su vez la voy a hacer cementar. Pero me llama la atención que esta muy clavado el tubo. No movió nada nada. Te costo sacarlo?

  • @SergioMartinez-xy2uv
    @SergioMartinez-xy2uv 3 місяці тому

    Alguien me podría decir por favor. Que medida debería quedar en la punta del eje para poner el brazo porta masa

  • @Ричард-м4е
    @Ричард-м4е 4 роки тому

    did you repair the beam Citroen ZX (torsion)

  • @charlestonzandomenico7578
    @charlestonzandomenico7578 4 роки тому

    Belo trabalho parabéns

  • @wandersondaviddaconceicaos2589
    @wandersondaviddaconceicaos2589 6 років тому +2

    Olá aqui no Brasil não temos oficina especializada em trocar somente este componente como mostra no vídeo, tenho um Peugeot 206 e tive que trocar o eixo inteiro, pois somente uma empresa disponibiliza o eixo recuperado com rolamento, pois outras que tem monta o conjunto com bucha em tecnil, como tenho o eixo original gostaria de saber se a empresa vende este kit de ferramentas para extração e montagem desta ponta da manga, pois necessito trocar do meu eixo que está guardado pois gosto do carro.

  • @BullittSousa
    @BullittSousa 5 років тому

    Hello, were can I buy the tools in Portugal???

  • @zyankali2357
    @zyankali2357 6 років тому +1

    wie gut das optimal für seine langlebigkeit in sachen lager und co bekannt ist .... ... nicht

  • @christiansarmiento6890
    @christiansarmiento6890 4 роки тому +1

    Nose xq 60 no me gusta? Si mejor que eso no se lo puede hacer. No tiene ni un solo golpe que no se deba hacer y la extracción del eje es el mismo que lo aria con una prensa y sobre todo muy práctico no hay que bajar el tren

  • @bojanpetrovic3895
    @bojanpetrovic3895 6 років тому +2

    Hi to all! :-) I've hydraulic tools for this job, but i never can remove "big tube shaft" without heating. Any ideas or experiences about this, please... (Y)

    • @CosgroveNotts
      @CosgroveNotts 4 роки тому +1

      Yep you need gas bottles on it

    • @bojanpetrovic3895
      @bojanpetrovic3895 4 роки тому

      @@CosgroveNotts Thank You!

    • @adamstilldrives
      @adamstilldrives 2 роки тому

      @@bojanpetrovic3895 what did Cosgrove say? I can't see their comment. Thanks

    • @bojanpetrovic3895
      @bojanpetrovic3895 2 роки тому

      @@adamstilldrives Me too... I don't know, comment disappeared.

  • @juanmawildee
    @juanmawildee 4 роки тому

    hello, what diameter is the rod?

  • @noahm.4001
    @noahm.4001 3 роки тому

    Wo bekommt man das Kit?

  • @bendude6748
    @bendude6748 6 років тому +1

    what is the price of this tool?

  • @TedBay2010
    @TedBay2010 7 років тому

    Muito bom, mais quem faz esse Serviço aqui na Bahia/Brasil ????? Tem profissional pra fazer esse Serviço aqui em Brasil?????

    • @MrBossplays
      @MrBossplays 6 років тому

      Ted Bay cara uma vez eu levei em sp ele fez isso mas não sei se na Bahia tem

    • @MrBossplays
      @MrBossplays 6 років тому +1

      Ted Bay cara uma vez eu levei em sp ele fez isso mas não sei se na Bahia tem

    • @andersonneres1643
      @andersonneres1643 6 років тому

      Ted Bay vc fez onde?

    • @TedBay2010
      @TedBay2010 6 років тому

      Aqui na Bahia, Alagoinhas.

    • @alandias3357
      @alandias3357 5 років тому

      @@MrBossplays onde fez esse serviço em São Paulo?

  • @Arhme1
    @Arhme1 6 років тому

    Guten Tag, habe Ihren Reparatur Kit im Internet gefunden. Nach Anruf bei Optimal sagte man mir ich solle doch mal Ihnen schreiben. Wo finde ich eine Werkstatt welche diese Reparatur durchführt. Im Raum Stuttgart wäre am besten. Über jegliche Hilfe wäre ich sehr dankbar. Vielen Dank

  • @zioluigicobretti7828
    @zioluigicobretti7828 4 роки тому

    dove acquistare???

  • @nagorncaraba4310
    @nagorncaraba4310 6 років тому

    Megane Scenic tem o mesmo sistema.
    Sem o hidráulico também se consegue tirar e colocar a peça.

  • @divulgabeatrapfunk8598
    @divulgabeatrapfunk8598 4 місяці тому

    Esse carro desanima e essa porcaria de eixo

  • @TedBay2010
    @TedBay2010 7 років тому

    Super Idee. Wo kann ich das Werkzeug Kit kaufen, zu welchem Preis, und hier nach Brasilien schicken lassen?

    • @OPTIMAL-Germany
      @OPTIMAL-Germany  6 років тому

      Dear Mr. Bay, Please send us your contact and your location to marketing@optimal-germany.com. Our Sales department will send you a retailer contact. Best regards.

    • @TedBay2010
      @TedBay2010 6 років тому

      tedbay@hotmail.com

  • @STomo30
    @STomo30 7 років тому +1

    Where can you buy one from?

    • @OPTIMAL-Germany
      @OPTIMAL-Germany  6 років тому +1

      Dear Mr. Tomlinson, Please send us your contact and your location to marketing@optimal-germany.com. Our Sales department will send you a retailer contact. Best regards.

  • @boussaedbl9423
    @boussaedbl9423 7 років тому

    good from algeria

  • @andyluo8707
    @andyluo8707 6 років тому

    Please tell me how to buy this tool in Taiwan???

    • @OPTIMAL-Germany
      @OPTIMAL-Germany  6 років тому

      Dear Mr. Luo, please contact OPTIMAL Asia for your request: v.keeleevand@optimal-asia.com. Best regards from Langenbach/Germany. R.Köhler

  • @АндрейТопыч-ш2ю
    @АндрейТопыч-ш2ю 5 років тому

    👍😁

  • @adilsoncaele826
    @adilsoncaele826 4 роки тому

    Vou levar meu Peugeot 106 está com está doença de eixo

  • @СергейАбрамов-л8ж
    @СергейАбрамов-л8ж 4 роки тому

    Как и почему Вы пальцы наружу вытакиваете,а не во внутрь-как положенно???!

  • @СергейАбрамов-л8ж
    @СергейАбрамов-л8ж 4 роки тому +1

    Учите Людей неправильно делать!(Посмотрите как Мужики в Полонном,Хмельницкой области-делают!Учитесь у них... Студенты...

  • @alekskralj5750
    @alekskralj5750 6 років тому

    Wie kriege ich dieses Werkzeug komplett lg

    • @OPTIMAL-Germany
      @OPTIMAL-Germany  6 років тому

      Sehr geehrter Herr Kralj, senden Sie mir bitte Ihre Kontaktdaten an r.koehler@optimal-germany.com, dann leite ich Ihre Anfrage an meine Kollegen im Vertrieb weiter. Viele Grüße aus Langenbach, R. Köhler.

  • @adamstilldrives
    @adamstilldrives 2 роки тому +1

    Only the French. Only.

  • @altanaydervishev5180
    @altanaydervishev5180 7 років тому +3

    Stupid system