ScanNCut Troubleshooting : AllBrands After Hours

Поділитися
Вставка
  • Опубліковано 29 жов 2024

КОМЕНТАРІ • 38

  • @lindaallen304
    @lindaallen304 Рік тому +1

    I have had my Brothers Scan N Cut 650WX for 4 years and have only used it to cut felt Christmas ornaments. Thank You this was really informative.

  • @julieverschage3160
    @julieverschage3160 Рік тому +2

    Yes please on the acrylic video

  • @lanettelykens8345
    @lanettelykens8345 Рік тому +1

    Yes I’d like to see you cut acrylic and embossing.

  • @johnk6847
    @johnk6847 Рік тому

    Great video, Courtney. I'm hoping to try the piercing kit soon. A video with that kit and maybe a couple of other kits would make a good video!

  • @weikelmd
    @weikelmd Рік тому

    I would love an embossing video showing how you did your Christmas cards! AWESOME!

  • @michellefrothingham4275
    @michellefrothingham4275 Рік тому

    Hi Courtney 👋. Great to see you… this was an awesome video… some reminders of what you have taught us in prior videos… one question re: cutting… i like to do wool appliqué and i would like to place my Steam a seam stabilizer to my wool… so paper side up on my lo tack mat? I question because you mention that we need the fabric to be firmly stabilized… and yet wool has a loose weave… again… thank you

  • @FawnaNazza
    @FawnaNazza Рік тому

    Hi Courtney, great video. Just curious what is the DPI for the DX325? Thank you for your informative information.

  • @michellefrothingham4275
    @michellefrothingham4275 Рік тому

    Thanks!

  • @bethpowell6650
    @bethpowell6650 Рік тому

    Hello from south of San Antonio.

  • @annphilbeck5174
    @annphilbeck5174 Рік тому

    hello from Providence Forge Virginia

  • @janejarvis6725
    @janejarvis6725 Рік тому

    Hi from Pennsylvania

  • @crissaducharme4104
    @crissaducharme4104 Рік тому

    I am machine embroidering snap tabs on vinyl using tear away stabilizer and a felt back. Can my can n Cut trim these for me? i did multiples in one hooping

  • @aliciasteward2635
    @aliciasteward2635 Рік тому

    I have ordered so many blades that I can't count and they are all wrong. I have an SDX125 please tell me what blades to purchase! How can I get my machine to cut 12x24? i doesn't let me use this function.

  • @timeenuf4200
    @timeenuf4200 Рік тому

    I recently received a request from a friend to make a large saying using my Standard 12 x 24 and a standard blade as I didn't have either a low tech mat or vinyl cutter. She purchased Cricut Smart & Vinyl Gold. Every time I laid it on the Standard Mat it would bubble in places prior to cut and no tricks I could find on UA-cam helped. Have you ever had that happen?

  • @tennistaylor1
    @tennistaylor1 Рік тому

    What is different about the rotary blade and it’s use?

  • @wendystout7060
    @wendystout7060 Рік тому

    I purchased the SDX125E, took it out of the box, scanned an image, started cutting on template plastic, (very thin). It was working fine at first then stopped cutting two thirds of the way. After trying to get it to continue, with no success, I started again with a new piece of plastic. It started and then immediately stopped. I contacted support and they thought my plastic was too thick. So, I then thought to try again using the card stock that came with my machine. It did exactly the same thing. It started cutting and then immediately stopped. I've checked the troubleshooting in the manual, but it's not solving my problem. Any help or ideas would be greatly appreciated! Thank you

  • @deniselawrence7491
    @deniselawrence7491 5 місяців тому

    I have heat and bond that is stuck to my low tack mat. I ironed it forever, it should not have stuck. I tried everything to remove it. I can't get it off. I don't know if it will hold with that on the mat? Is there a way to get it off. Scrapping does not budge it. Is my mat ruined? It's brand new!!

    • @allbrands1976
      @allbrands1976  5 місяців тому

      Hey Denise. Go to the dollar store and pick up the yellow spray bottle of Totally Awesome. Spray your mat, and take an old credit card or scraper tool to remove the paper from the mat. I hope that helps! Barbara.

  • @estelamorales5988
    @estelamorales5988 Місяць тому

    My machine is two yrs old and hardly used. I moved and wanted to use it but now it doesn’t stay on…😢

  • @SusanRichwine
    @SusanRichwine Рік тому

    Can you use best press or another starch?

  • @Cassandra815
    @Cassandra815 Рік тому

    If you cut an ornament out of balsa wood, can you also cut a vinyl one and place on top of the wood.

  • @ArtsiRosi
    @ArtsiRosi 10 місяців тому

    My machine suddenly stopped loading the mat in the middle of a project. I have an SDX125, brand new. I've tried 3 different mats and my machine says "Mat not recognized" for all. Someone please help before I throw this out the window!

  • @StuWright
    @StuWright 7 місяців тому

    the Brother 3.9inch ScanNCut Scraper Tool is £63 in england, that is expensive, can anyone suggest a cheaper alternative?

  • @kimlace3875
    @kimlace3875 Рік тому

    How do you sent from machine to canvasworkspace it keeps asking to register machine

  • @pattishelton3169
    @pattishelton3169 Рік тому

    Hello everyone

  • @tinkfinch1674
    @tinkfinch1674 Рік тому

    Hi Courtney why is it that when i scan in with my scan n cut that I can’t seem to lose the background on the image so i can edit the file. Thanks in advance from the south east UK.

  • @SH-dq2cy
    @SH-dq2cy Рік тому

    Hi everyone

  • @darlamassey9041
    @darlamassey9041 6 місяців тому

    Mat not recognized

  • @lindaraines474
    @lindaraines474 Рік тому

    How do you get to be a member

    • @CourtneyDouthat
      @CourtneyDouthat Рік тому

      Click on the JOIN button right below the video. Sorry I probably should of explained that in the video.

    • @evelyngoodman2334
      @evelyngoodman2334 Рік тому

      The join button is not visible to us

    • @CourtneyDouthat
      @CourtneyDouthat Рік тому

      @@evelyngoodman2334 Try it on the web version of UA-cam. I don't see it on the app.

  • @kimn775
    @kimn775 Рік тому

    I clicked on university but says file not found?

  • @darlamassey9041
    @darlamassey9041 6 місяців тому

    New fresh out of package mat not recognized

    • @allbrands1976
      @allbrands1976  6 місяців тому

      Please contact the store where it was purchased, and they can help. If it's AllBrands call us at 866-255-2726 =)