ARB OME BP51 Shock Failure | What Happened | How Did ARB Respond? | Toyota Landcruiser 200
Вставка
- Опубліковано 12 чер 2024
- In this video Terry from Jafffa Adventures narrowly avoids a disaster in his 200 series Toyota Landcruiser when the ARB Old Man Emu BP51 shock breaks in two at high speed. What happened to the OME BP51's, how did ARB respond to the OME BP51 failure, and what did Terry do to remedy the failure.
All this will be revealed in over the next 25 minutes.
There are lots more "how to" videos in the LC200 playlist, check them out.
#jafffa
#arb #oldmanemu - Авто та транспорт
I had similar service from ARB over an air compressor that melted a cable, they took the compressor and did a full refresh rebuild for free, 5 years after I bought it, and included any updated parts, I still have the compressor over 10 years old now. Still going strong.
Great story mate, thanks for sharing😎👍
That’s an awesome outcome from a pretty average situation. Great reason to continue to support Australian manufacturing.
Agree Shane, 100%😎👍
That's a brilliant outcome. Well done to you and to ARB. Kind of service that is unheard of.
It really was😎👍
I knew you would stay on the high road Terry, but hats off to ARB for backing their (7 year old) product in - no questions asked. That goes a long way to keeping repeat customers in the house and bringing new ones to the party.
Could not agree more mate. Cheers😎👍
I have lovells and they won't even cover a dead shock in warranty.
Is just 💩 ride like a boat in rear but they refuse to fix.
Shows the difference!
@ausguy4385 good to know, cheers mate😎👍
I bought a jeep with an arb awning attached. ARB awning fell off the roof rack. Right off its rivets and not from the mount. This was in central america. ARB worked with a local rep to get it replaced and installed. I couldnt prove purchase being a second hand owner. Grateful for their support.
That’s a great story William, thanks for sharing😎👍
Terry, it’s great to hear first that you got out of the failure without any injuries, second that ARB backed up their products with a great effort.
Thanks Tom, I too was very pleased on both accounts. I appreciate you stoping by. Cheers👍😎
Once again great tech video terry. I really enjoy watching your content. It’s great to have the knowledge to do these sort of repairs not only for myself but also for anyone I meet on the track that need help. It’s also great to see ARB standing by there product. My 200 has many ARB products fitted. All without any issues. Can’t wait for your next video.
Thanks Steve, I’m glad you are enjoying your stay with us😎👍
Canadian accent but with Aussie slang = hillarious! SUBSCRIBED. Very nice workspace you have got. I'll peek your channel - I see some projects in the background.
Cheers Mick, been a citizen for 30 years now so bound to pick up the odd bit of slang😉. Many many projects on the channel mate, you might find something that tweaks your interest. Enjoy your stay mate😎👍
Wow what customer service by ARB! They literally stand by their product even though you exceeded the warranty coverage 👏 i just installed these about 200 miles ago and when I first saw the video thumbnail I had some serious concern but after seeing how long you had them on and the mileage I felt better about them and the icing on the cake how ARB handle it. Thanks for the video 🍻
My pleasure Stephen, I don’t think you will be disappointed. Thanks for stopping by, cheers👍😎
Fiendly pro-tip for you next time, you only need to undo the two lower ball joint bolts and sway bar link, and crack the camber/caster adjuster NUTS, so the lower control arm simply swings down and out of the way. This allows every strut assembly to slide in and out without having to undo anything else, other than the brake hose and abs attament bolts.
I've seen a few of the BP51 lower Strut failures now. Mmm.
Awesome video as always
Cheers Scott😎👍
That's amazing service from ARB/ OME.
Agree 100% mate👍😎
Great and honest update Terry, I have also found ARB to be very accommodating , after all there products are meant to be used, great to see awesome customer service. Keep up the great content. PS I wish I to had a hoist.
Cheers Paul, I’m glad you have had a good customer service experience as well. Cheers😎👍
Really glad racq looked after you as well as ARB seeing that you took off for a break. Good to see good things coming to good people, buddy! Keen to see the back ones go in 👍
Thanks for the kind words mate, I sincerely appreciate it 😎👍
Thanks for another great video Terry, so helpful when working on the big girl, reassuring to see a job done before us newbies roll around in the dirty bits
Great feedback mate, thanks for sharing 😎👍
A new subscriber here.
Gotta say, I love the delivery, presentation, content and your choice of words :)
Just perfect.
Cheers mate, that’s very kind of you to say. Please enjoy your stay👍😎
Another good video Terry and a great outcome good on ARB for backing their products very happy with mine the way it handles and rides 👍
I’ve got a Tassie and Flinders trip under the belt since and continue to be very happy. Cheers😎👍
7 years, 150,000 kms of off roading in a shock, myself, they would be getting close to replacement anyway. Shock life is way over looked in vehicles.
Bloody hell, a new set of shocks and springs, that’s awesome from ARB
I agree matter, the time and distance travelled over the terrain I put them through was certainly pushing the friendship 👍😎
I chose BP51s for my new Hilux build. A noob to this world, my choice was based on convenience (and ARB/OME rep). The Ute is yet to take the first trip it was built for, but videos like this give me confidence in the product. Thanks mate
Enjoy that first trip mate, it will be awesome 😎👍
Lucky you got through that experience unscathed as it could have been easily be the dirty side up episode. Keep them coming Terry
It certainly could have. Thanks for staying with us Greg. Cheers😎👍
Thumbs up for integrity. Well said sir.
Wouldn't mind having you as neighbour! I'll have a go at most mechanical jobs but need a friendly bit of advice when confronted by something new.
Great episode thanks.
Cheers mate, integrity is very important to me. Enjoy your weekend😎👍
Im suprised ARB helped you. I called after a couple of years after my ascent canopy gas struts lost pressure. I was told nothing we can do, out of warranty.
I was pleasantly surprised and they backed their kit. Cheers😎👍
That's a good customer support kudos to ARB, also terry it's a good information for us also... Its a bit help for DIY like me.
Glad you found some value mate, thanks for stopping by😎👍
I had a top control arm failure. The nut came lose & the suspension let loose & ripped a Buch of pipes off the engine on my 300 series on Stockton beach. I made it off the beach & into the dunes before it completely died. I had the vehicle recovered from the dunes & dropped off at my Sydney ARB dealer. They repaired the car including having everything checked by Toyota & paid the considerable recovery costs. I was a bit pissed that the thing failed but I cant fault ARB for their customer service in rectifying the problems. I have since had a base rack & rear bar fitted by ARB. I will continue to use them.
That’s the stories I like to hear, not the crunchy bit, but the response of the supplier😉. Thanks for sharing 👍😎
Interesting video and awesome outcome, seems like ARB service is hit and miss. Had two warranty claims for ARB haven’t been great especially the second warranty claim for there tyre pressure sensor failed after 12 months Offroad. Denied the claim and got told that I broke it. Sadly has put me off ARB products if they want back there warrenty.
I agree mate, I have heard both positive and negative stories. Cheers😎👍
Great video Terry. Don’t forget a little grease on the lock stops. I’m jealous of that shed of yours. Mike
Cheers Mike, I’m glad you stopped by😎👍
Terry, ARB is definitely one of the good ones. Another company that is customer focused is Norweld. This is why I buy from these companies; yeah, sure you pay extra but look at the aftercare you get. Way better than some of these so called 4wd companies I've dealt with. BTW subscribed.
Cheers Rob, thanks for sharing your experience. I trust you will find some value in your stay here, for however long or short👍😎
That's awesome work on ARB's part mate. Nice job. Cheers Steve
Thanks Steve, agree 100%😎👍
That was lucky with the full replacement. Nice work
Cheers mate😎👍
A good result in the end. Well done Terry.
Cheers mate😎👍
Interesting to hear that racq helped. I recently lost a wheel off the car, they refused to pay for a truck to take it 5 minutes into town because it wasn’t classed as an accident. Not on ultimate though. Guess I need to look into that
Interesting
I can’t praise them enough 😎👍
ARB have always been pretty good with customer service. Great content 👍
Thanks Ian, I appreciate you spending time with us😎👍
Great advertising for ARB. Good on them.
Yep, a good way to run your business 👍
Well done ARB!!!
Agree mate👍😎
Another great educational video Terry, When are you going to upgrade to a LC300 so you can start your new 300 maintenance library videos 😉
Not gonna happen mate, I’m near 60 years old and I think the old bus will see me out😎👍
That’s a great video mate 👍🏻
Cheers mate, that’s very kind of you to say 😎👍
At least your wheel didn't fall off. We had an LBJ fail on the 90 and the whole wheel collapsed and went under the vehicle. RAC to the rescue for us too 😊
Wow, that would have been scary. Cheers 😎👍
Great video, looking at suspension for my 200. Your video inspired me to visit ARB. After sales service is very impressive. 😊
Cheers, I rate them and that’s the reason I went in again 😎👍
I've put my Bp51's through many a torcher test in vic high country, Flinders etc with my 200 series. All good after 50,000kms. An expensive option but it was the rep plus the nationwide network of stores why i decided to kit my cruiser out with arb products.
@TheCraig1374 good to know mate, cheers. I’m in the Flinders currently and they are eating up the terrain.😎👍
Love the Canadian accent with the Ozzie tang. Very interesting to watch.
Cheers Mark, I’m glad you are here mate😎👍
Thanks for telling us how you found RACQ to deal with.
All good mate, could not fault them😎👍
Thankyou for a great video.
No worries mate😎👍
I always disconnect the sway bar when I'm shooting for full droop. The shock on the other side, acting through the sway bar will limit how much droop you get on the the broken side.
Cheers👍
That was a great video. I have a 200 that had a front ARB BP51 spring collapse after only 1.5 years and about 20000 miles of mostly off-road abuse. ARB was not as quick to replace. It took about 3-4 emails and a phone conversation for them to finally replace them. I was a bit surprised at the push back being how new they were. Aside from that, I keep a spare CV with me, should I also carry a spare gasket kit? Thanks so much.
Cheers mate, it’s good to see you were looked after as well. I also carry a spare CV. To what gasket kit are you referring as you do not need any gaskets with a CV replacement. Cheers😎👍
I had same failure back around 2018. 200 series front with less than 30k km. Wife was driving picking kids up from school (just started driving and went over speed bump near the school). We had just returned from 18k km trip around WA from east coast. Appeared to be too small of a radius where the shock shaft ends at the bottom. Local dealer who fitted the kit was excellent and replaced all 4 shocks with new ones. Disappointing to see from a premium product. I wonder how many others there are
That is a good news story in the end mate, thanks for sharing😎👍
Great video and good on ARB
Cheers James, I agree, great back up😎👍
Would hope that ARB offer that service to everyone
You can only ask politely as I did😎👍
Our Local ARB (Traralgon East Store) have been nothing but fantastic to deal with over the years.
Good to know Mick, cheers😎👍
Should have bought Bilsteins.
I have used them since the 70's in on road and off road vehicles and never had any sort of failure.
I'm glad ARB came through for you because that is definitely a great tribute to their customer support.
Ok
Did this happen on the way back from the Simpson with the bike trailer on the back? Geez, that could have ended pear shaped. Glad it didn't, stay safe
Sure did mate👍
Terry,.... can you come to Melbourne and fix / service my 200 series.... Awesome vids mate
Cheers mate….and no🤣👍
G'day mate, great video. I am currently researching a 2" suspension lift with adjustable ride shock mainly to mitigate damage from corrugations as well as comfort and then adjust back to daily driver setting when back on bitumen. What were the reasons for choosing the BP51's, in terms of use case, shock type and brand? Thanks in advance for an information.
I loved the ride they deliver mate. I use the car mainly off road and it eats rough corrugations and the like up with ease. Believe it or not, the on road handling is much better than stock as well, it really is a great all around product. I do not change the settings for on and off road, just leave them where they are for both use cases. If I need extra weight carrying capacity like when I am fully loaded before a trip, I just pump up the air bags. That’s the reason I replaced them with the same again. Cheers👍😎
G'day Terry ,that was some failure things could have ended much worse. Imagine a failure like that CSR? For sure, unradiused shoulders on heat treated components is never good, did the break look to show crystallisation ? That was a great result from ARB ,I was looking to upgrade my shocks on my LC200 to 51s, and it would be interesting know to know if this was an isolated incident.
Not sure if this is isolated mate, but a great example of product support nonetheless 😎👍
Great video Terry, did ABR give any feedback on how this failure point would be removed going forward?
No mate, they simply agreed it was a critical failure and replaced them. Cheers😎👍
I’ve heard of this failure happening a few times. I actually called ARB and asked if it was an issue as I have BP51. The response was “they’ve never heard of this happening before” clearly they can’t deny it now. Surly there has to be a safety recall!
Thanks for sharing👍
Love your style Terry ! :) (Re: blackmail and such)
Cheers mate, I appreciate that. Integrity is very important to me👍
Pity i didn't have a similar experience with my air locker. ARB couldn't pay me to take one of those POS diff centres. I went with electric lockers with my rebuild.
Pity indeed👍
Hey Terry what settings do you have on your BP51’s on the rear. Thanks again for all your content that you produce.
Compression 2, rebound 3. Cheers👍😎
Sweet thanks again
Dear Terry, All this unfortunate situation aside; if you were buying again, would you get the same ARB shocks & springs or would you get for something different? I'm about to replace some OME shockies (not as fancy as those) and am wondering if these are a good option for my 200. My other option is to replace like for like as I'm not unhappy with my current ones (they are just worn). As I watch the end of the video, I see that you purchased replacement of the same type. Question still remains - is there any ARB shock absorber that you would rather go with if you were buying from scratch?? Thankyou
Yes mate, if I were forking out the coin for new suspension I would get the same. I’ve since done a month in Tassie and 3 weeks in the Flinders that have just reinforced my opinion. I really do rate this suspension 😎👍
ARB well done, that’s the way to run a business
I could not agree more mate😎👍
Cool ep
Cheers mate😎👍
If your getting a wheel alignment and its at round ten twelve ortwo thats when they have breaks worst time cayse they go on break and forget all the time i double check they have tightened every thing at the shop that way its fixed straight away
Cheers Richard😎
Great service from ARB, I’ve had similar, but I was hoping you’d Tello us what they actually said. Yes, you had a replacement, but did they discuss the failure at all?
I did not discuss it because they did not say anything at all. They simply stated that they are well out of warranty but here’s your replacements. Cheers😎👍
@@JafffaAdventures Fair enough. I have a set which have done 120K - one slight leak. Might be time for a rebuild.
Not bad going mate😎👍
Is the truck bump stopped properly for the extended travel shock? Just because they are longer does not mean they stop the uptravel earlier.
Yes
ARB either need to increase the shock diameter size or avoid manufacturing stressed components with sharp corners. Stressed metal components do not like sharp corners., as Terry mentioned..
That’s it mate😎👍
600 kg load rated rear coils, what are the standard coil load rate in a 200? Thanks
Would not know mate, cheers😎👍
I'm only 4 minutes into the video but in my opinion that spring is still under quite a bit of tension while disasembling...
No, as you can see I checked it before removing the tyre. It’s not my first rodeo👍😎
Wow, that’s what I call customer service!
Could not agree more mate😎👍
I've seen a few GVM upgrade struts snap the lower mount on brand new Ford Rangers. Definitely concerning.
👍
What pre-load are you running on each side for the spring.
Don’t know the actual n/mm or lb/inch measurement but the measured number of turns is detailed in the video
I had two sets of ARB Old Man Emu struts fail on my Tacoma and got free replacements after showing proof of failure. Yes they stand behind the product. I must add that the BP51 is a high-end shock and typically need to be serviced every so many km. Did you ever have them serviced?
Good to hear of your positive experiences.
Never had my shocks serviced 😎👍
@@JafffaAdventures I had some Fox 2.5s and they came with a little book, "Shocks need love too" which gives the service intervals depending on use. I don't have down time for that on a daily driver.
Cheers😎👍
This'll be interesting!
It was very much above my expectations 😎👍
@@JafffaAdventures One would hope the RAA here in S.A. would have me covered like that! (it's interesting that for all these years of being self reliant, the year I broke down 6 hours from home, the kids bought me a "full" membership & I've continued it since)
Good stuff mate, I trust you will not have to use it to find out😎👍
what did you do to fix the spring where it was gouged?
I replaced the rims. This is covered in a future video. Cheers😎👍
ARB knew who you were and that you have a following and were more than happy to replace them free of charge you didnt have to mention it. They knew 😝
Disagree, the channel is a minnow.
Why didn't you put in chrome moly cv's in as replacements.
Factory CV’s are quite strong and I have never broken one. I take the vehicle on some pretty extreme tracks and am very mindful of mechanical sympathy when wheeling. Twin lockers also allow me to crawl through most stuff, where open centres have to hit tricky bits with momentum 😎👍
Shocking 😲
Groan😂
Well.... Bugger me! I wasn't expecting them to send you replacement 😯😯How did your rim fair Terry?
Was a bit scared on the inside but certainly ok. I have since replaced as I wanted a different look which is in a future video 😎👍
@@JafffaAdventures Oh no! More upgrades 😂👍
You know it😉
Wow arb did something good 😊
Indeed👍
big mistake the lower shock mount needs to tighten when car on ground it destroy the lower bush when raised and tightened the bush is designed to work in a certian rotation not lowerd in its natural ride height on the ground hope this helps with all rubber bushs
That’s incorrect with these style struts. The lower mount has a spherical bearing as the load point. It rotates in 360 degrees and swivels. The old rubber bush style needs to be tightened with the vehicle on the ground, not these 😎
Yep, shout to RACQ......awsum every time.....🇦🇺😎
Indeed mate😎👍
Aren’t you suppose to tighten shock bottom bolt with weight on it so doesn’t wreck bush ?
The bottom of these shocks have a spherical bearing that actually rotates with the movement of the suspension so it does not matter if the vehicle is on the ground or in the air. If your shock has a rubber bush, then yes.👍
@@JafffaAdventures ah gotcha. So what did arb say about the failure ? I would have tried to get them to pay for the whole lot. Warranty doesn’t mean much Has to be fit for purpose
ARB were silent on the failure, just said they would replace them. I got a $2000 set of suspension for nix after mine did 150,000km at 7 1/2 years old. That is a sensational outcome, and pushing for the rears is just having a lend in my opinion. They exceeded my expectations, and that is all I can ask. The reason I did not have ARB install it is trust. I do not trust ARB or ANY OTHER WORKSHOP to work on my vehicle. I spend a lot of time off grid, in very remote locations where I rely on my vehicle to get me back out again. If something goes wrong because of an installation issue, it's on me and me alone. I know my work, I trust my work, and I back myself, plain and simple. Cheers.
@@JafffaAdventures no I meant getting them to pay for cv etc it’s their fault everything else got damaged
Like I said, pushing for more than what I already received does not sit well with my moral compass. You may disagree, but in my opinion they did more than enough👍
I must be going to the wrong ARB store I had three failures on new equipment and was shown the door absolutely no customer service backup
That’s not good at all😔
@@JafffaAdventures after sliding $10K across the counter for various items on a build you expect some backup
I agree mate👍😎
Well ARB do charge Top Dollar for their Gear . And THAT particular failure is a " That's not s'posed ta happen..." failure .
If they wish to maintain a " Best in the Business " profile , reactions like that are Essential . Almost mandatory .
They do indeed charge top dollar👍
Very good service but why the failure? Snapping a a 4wd shock absorber as you did doesn't happen very often.
Time, abuse, design. I’d suggest a combination of them all.
@@JafffaAdventures You have forgotten the act of God... BTW I like your videos.
Cheers👍
Still waiting on my warranty seat cover from 1.5 years ago from ARB.
That does not sound good…
@@JafffaAdventures zero contact unless I call. Ended up selling the car & didn’t bother telling them don’t worry about it ,…. Just to wait n see how long they take.
So what did ARB say about the failure?
ARB were silent on the failure. Cheers
Cheaper than court case ✅
That’s not how I roll, but they would not know that 😎👍
Not a fan of those shock seen to many failures but if they work for you enjoy was a good outcome
It was a good outcome that I was pleased with. Been to Tassie and the Flinders on the new gear and love it😎👍
@@JafffaAdventures glad it’s all working now your fillings in your teeth won’t fall out
Yep, all still in place😉
Glad i saw this video, i guess ill be going with bilsteins instead
Ok
150k and failure/ snapped shaft… good going not too sure that is good going. these are off road designed stocks.
I doubt you would have seen anything like this if you had purchased a set of King shocks 150k ago.
Not convinced these preform anywhere as good as they look
Ok
Looks like that tie rod end boot is torn
Ok
It was probably cracked before it happened and it just finished it off
🤷
Very possible mate👍
I would never stand in front of the coil spring, luckily you don’t kill yourself🙈
In the video you would have seen me unload the suspension on the hoist. You would have also seen me wiggle the spring to see if it had any load on it as well as my commentary. No danger in this case👍
that's why they say replace shocks at 80000km
Ok
A strut should never fail like that regardless of age or k’s on them and that’s why arb replaced them
Whatever the reason, I was the beneficiary. Cheers
don't put your fingers between spring coils
🥴
😮6k
Ok
What's up with the Soviet Union flag ? 🤔
My grandfather was born there and immigrated to Canada when he was a young lad. Without his bold move during a time where he could have been executed for his actions, my family would not enjoy the freedom we do today. It honours him❤️
ARB wouldn't be sending out replacement parts, to most people, so definitely a PR move.
Disagree. They don’t know me from a bar of soap, never mentioned social media, just approached them in a rational and reasoned manner as a concerned customer. That counts for a lot.
Most of the ARB response is your UA-cam stardom...
Sorry not saying you did anything...BUT... they know you and a fail video with free shocks is bad advertising... with a set its a "good" story.
I do say lovells wont even cover my dead one in 2 year of 3 year warranty.
Interesting they sent a set... lovells like many fit a single one only...
Funny part i found out lovells Adelaide gets the free parts under warranty and is a set... yet all 3 times they replaced skocks from installation issues they only installed one... not the set
Which is what gets me... they were given the set and if installed the dead shock thats the only old shock would be new (9month ish) and not dead...
Disagree, but if that is your belief that’s cool but not how I roll. Best you find a channel more aligned to your value set👍
What is it with that rat squeaking voice that comes on every now and again?
Beats me
Had the same thing happen to me on a hilux and ARB replaced shock no charge
Good to know David, thanks for sharing😎👍